Mini displayport hdcp

I've got an LG L204WT screen connected via VGA cable to mini Displayport. I've also connected to a sony Bravia TV.
I purchased an HD movie in itunes, and cannot watch it on either screen because of the hdcp.
I know the master key has been released, is there any info on how to use it/run a keygen, so I can watch my movies?

Don't know if you have resolved this but, for what it's worth....here's my setup:
MacPro (2009)
ATI 4870HD
LG GGW H20L BluRay Writer
HP DreamColor 2480zx
Win7 64bit Ultimate
Cyberlink Power DVD Ultra
From the ATI card to the HP monitor, I have a MDP to Full Size DP; works perfectly. I have also utilized a MDP to a full size HDMI cable and that works perfectly as well.
Don't know why you are using MDP-DVI-DVI-HDMI. Simplify....you only need one cable.

Similar Messages

Is HDCP protection always on when using Mini DisplayPort to HDMI adapter?

I'm trying to capture my MacBook Air (2010) desktop for use in a Podcast.
So I purchased a Mini DisplayPort to HDMI adapter and plugged that into a HDMI capture card on another machine.
Unfortunately it keeps telling me the stream is protected and it won't display anything.
I've tried my 2010 iMac and 2011 Mac Mini too, but they all produce the same issue.
If i plug them directly into a TV instead then they display fine, but not when connected to the capture card.
A windows based laptop with HDMI out works fine as does a DVD player. But when I attempt to play a cop protected DVD - then the HDCP kicks in and the picture is blocked.
Does anyone know if there is a way to display just the Lion Desktop without invoking HDCP protection?
Thanks in Advance
Anthony

Is the failure repeatable? If not, I would forget that it happened once and move on. It had something to do with pages moving in and out of the registers. S**t happens.

Trouble Playing DVDs with Mini DisplayPort To Dual-Link DVI Adapter ?

So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter for my 30" Cinema display to connect to my MacBook Pro.
I open up Apple's DVD player and the screen is blank but I can still hear audio.
If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
Any idea what this problem might be??
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3532
gMux Version: 1.9.22
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version: 1.03

You've probably fallen into the nasty pothole created by the advent of HDCP compliant graphics on Apple computers and a mishmash of older and newer Apple gear that does/does not support HDCP.
Ironically, if you were using an older Mac notebook (prior to late 2008), everything would play just fine because HDCP wouldn't come into play anywhere.
That is my guess as to what is happening.

Can I watch an iTunes movie rental on a TV connected via mini displayport?

I'm not sure if there's been any headway with this, but I've got a mini displayport to HDMI adaptor on the way that I'm going to use to connect my MacBook Pro to my HDTV, effectively using the TV as an external monitor.
And of course, I want to watch some iTunes movie rentals on the TV instead of my laptop, but digging around the internet has shown that I might be facing an issue relating to the HDCP standard that would prevent me from being able to use my TV in this manner.
Is this still an issue? I have a fall 2009 MacBook Pro, which may be important, as I've read that Apple modified the mini displayport on the MacBooks in 2010.
Other than renting a movie as a sort of guinea pig with the possibility of being shot down and wasting my money, is there any way to know if this is going to work? Or is it simply a fact that any monitor/TV connected to my MacBook through the mini displayport is incompatible with HDCP, and I'm totally out of luck?
(Which, FYI Apple, is utter horse **** and is absolutely counter-productive to the notion of encouraging me to pay for digital entertainment.)
What are your thoughts, folks?

If your HDTV is HDCP compliant, you probably will have no problems. But you might want to read this information which while written a while back still, to the best of my knowledge, applies:
http://www.ilounge.com/index.php/articles/comments/16488
HDCP compliance is, from what I've read, rather a "rubber ruler" so even if your TV lists as being HDCP, it might or might not work correctly with your Mac. Testing with one movie first might avoid an expensive surprise.
As to your complaint to Apple, it probably wasn't up to Apple but instead was forced on them as part of the conditions by the content owners for licensing movies and shows to the iTunes Store. But feel free to comment to Apple via their feedback pages:
http://www.apple.com/feedback

How do I use iMac as monitor for external DVD player (HDMI to Mini DisplayPort)

iMac 27" (late 2009). Internal DVD is region locked. I would like to use an external DVD player to watch DVD's from other regions.
I can't use the new Apple SuperDrive because they say it's not compatible with iMac's before 2012. (Is it??)
My iMac doesn't have Thunderbolt. It has mini displayport.
I have resigned to getting a generic DVD player and plugging it into the screen.
I have found this in Apple support pages...
Can I use the iMac in TDM as a display for my gaming console, DVD player, or other device?
The Mini DisplayPort port on a supported iMac can receive DisplayPort compliant video and audio signals. Converters not made by Apple may provide options to convert other electrical, video, and audio protocols to Mini DisplayPort or Thunderbolt compliant signals.
( http://support.apple.com/kb/HT3924 )
What is DisplayPort compliant video and audio signals? Does HDMI fit into that signal type?
Is it possible to get an HDMI to Mini DisplayPort converter?
Will it work if I get a generic DVD player with HDMI output? (and connect it to the iMac through MiniDisplayPort)

First try VLC.
<http://www.videolan.org>
On many Macs, it will play DVDs even if the region codes don't match.
The Apple SuperDrive should work if you use the terminal (Utilities foldsr) command:
sudo nvram boot-args="mbasd=1"
There are also non-Apple USB or FireWire external DVD (and Blu-ray) drives, such as:
<http://eshop.macsales.com/shop/optical-drives/superdrives/>
Apple's DVD player may not work with external drives, but you can use VLC or Blu-ray™ Player
<http://www.macblurayplayer.com>
There is a converter to connect HDMI to the iMac via TDM
<http://www.kanexlive.com/xd>
but it will run at 720p (1280 x 720) and may have problems with HDCP (High-bandwidth Digital Content Protection) on HDMI from Blu-ray or DVD players.

HT3924 I can't get my iMac 27" 2009 Mini DisplayPort to work as external monitor for Macbook Air Thunderbolt...

I am using a Mini DisplayPort Cable from iLuv as the connector between them. Upon connecting the cable or hitting Command/F2 on the iMac, the iMac will go blue followed by the Macbook Air, then both will flicker and usually the iMac reverts back to its native screen and NOT display the Air's. Or sometimes the iMac will go black while the Macbook Air becomes very slow and choppy, and while selecting the Gather Windows option in the display window in Settings will show the Imac display window, I can't really do anything with it. I even tried switching the ends of the cable to see if that would help, but it didn't. Advice?

Welcome to the wonderful world of copy protection.
Your display may not be on the "approved" list, or was removed from it.
Apple's Mac lines includes a form of digital copy protection that will prevent protected media, such as DRM-infused iTunes movies, from playing back on devices that aren't compliant with the new priority protection measures.
The Intel-developed technology is called High-bandwidth Digital Content Protection (HDCP) and aims to prevent copying of digital audio and video content as it travels across a variety of display connectors, even if such copying is not in violation of fair use laws.
Among the connectors supported by the technology are the Mini DisplayPort found on Apple's latest Macs, in addition to others such as Digital Visual Interface (DVI), High-Definition Multimedia Interface (HDMI), Gigabit Video Interface (GVIF), and Unified Display Interface (UDI).
Apple has apparently acquired a license for the technology and is now using it across its lines to to prevent transmission of purchased iTunes content (and some DVDs) to devices that don't include support for HDCP.
The problem can often be solved by using an HDMI to Component Video adapter. Many believe that Component Video will give you a better HD picture than HDMI without any of the hassles of HDCP.
Generally try to avoid using HDMI. When able, use Component Video. With Component Video you get full HD quality and you will never have HDCP hassles (which of course is why Hollywood wants to ban it).
However sometimes a display can be HDCP certified and then later be removed from the certified list. So purchasing a new display may not be a permanent solution.

No audio out through Mini Displayport?

Last night I hooked up my first-gen MBA to my plasma TV using a connector that converted the Mini Displayport to HDMI. The movie I streamed from Netflix looked great. One problem -- no audio. I guess there's no audio out through the Mini Displayport? I was forced to hook up computer speakers to my MBA. Is there a way I can get audio to go through the Mini Displayport rather than the audio-out/headphone jack?

There are a couple of adapters out that will convert DVI plus optical audio to HDMI (with audio). They are all made by the same company (though they are branded and priced differently). I think they are currently running around $100. The problem you might run into is HDCP. Apple doesn't do HDCP with their DVI... so you'll end up not having a compliant HDCP chain... if that is important to you.
If you do this setup, make sure you have your TV set to a setting that is pixel to pixel... that is, doesn't adjust for overscan. Lest you loose some of your computer desktop.

I have macbook 13 2009 i need connect mini displayport to hdmi

hi i need connect this macbook by mini displayport to hdmi how can i do this?

If you have a DVI input plug on your TV a better solution would be to use a Mini DisplayPort to DVI adapter http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY with a DVI to DVI cable to the TV for video with headphone jack to RCA sound plugs for audio
HDMI is a badly designed interface developed for the purpose of controlling content not a superior signal. Since control could not be done with analog or DVI connections, HDMI was a new digital alternative to allow whoever wanted to control the content with HDCP.
By definition, a HDMI (High Definition Multimedia Interface) connection includes High-bandwidth Digital Copy Protection (HDCP). HDCP was developed by Intel, but it is the brainchild of the Motion Picture Association of America (MPAA) and it's purpose is to prevent copying of HD material.
HDCP is licensed by Digital Content Protection, a subsidiary of Intel. In addition to paying fees, licensees agree to limit the capabilities of their products. For example, high-definition digital video content must be restricted to DVD quality on non-HDCP compliant video outputs when requested by the source. DVD-Audio content is restricted to DAT quality on non-HDCP digital audio outputs (analog audio outputs have no quality limits). Licensees cannot allow their devices to make copies of content, and must design their products in ways that "effectively frustrate attempts to defeat the content protection requirements."

27: iMac Apple Mini DisplayPort to DVI adapter quits working post-firmware

I iMac Apple Mini DisplayPort to DVI adapter suddenly quit working after I installed Apple's latest iMac display firmware update. This is an Intel Core i5; the monitor is an LG Flatron 24" Wide, and when it powers up it says "no video input" and goes into power-saving mode. No amount of replugging cables helps, but the monitor works fine on other computers.
The Displays control panel just shows one monitor, and clicking Detect Displays does nothing.
I suspect Apple's Display Firmware Update. My installer log shows the following, but the problem only happened today after the latest update:
6/1/10 9:45 AM 27-inch iMac EFI Firmware Update 1.0
6/1/10 9:45 AM 27-inch iMac Display Update 1.0
6/4/10 11:47 AM 27-inch iMac SMC Firmware Update 1.0
6/4/10 11:47 AM 27-inch iMac Display Update 1.0
6/5/10 7:29 AM 27-inch iMac Display Update 1.0
I have automatic updates disabled, but after each update I would see more firmware updates ready, but caution leads me to never install more than one of these at a time, and then to wait a while to see if anything bad happens. The odd thing is that the Display Update 1.0 seems to have been installed three times in this course of events. Alas, there appears to be no way to uninstall a firmware update.
Here is the System Profiler Graphics/Displays output:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Display Connector:
Status: No Display Connected
It says the Mac sees no display connected, and the display gets no video signal. Since the adapter is an active device (it has powered electronics to convert DisplayPort signals to DVI signals) I suppose it could have just coincidentally died. But that seems unlikely given that the thing worked perfectly just before the last firmware update.
Does anybody have similar experience, or better yet, a fix?

Unfortunately the Apple Knowledge Base does not give much information about this update. Such has how to tell if it has been successfully installed. I suspect that because it keeps recurring in the install log that it has not been installed successfully as yet. Are you receiving this update through Software Update? Can you locate the installer for this update? It maybe located in Apps/Utilities.
Some firmware update installations can be interrupted/corrupted by attached devices. If you find the update's installer on your iMac, I suggest that you detach all external devices from the iMac, use an Apple USB keyboard & mouse if available, follow the instructions carefully and install the update manually. If you do not locate the installer I suggest downloading manually from the link below and installing it.
The Knowledge Base article mentions that your iMac should also have a Graphics Firmware Update. I suggest that you download and install that as well.
27-inch iMac Display Firmware Update 1.0
http://support.apple.com/kb/DL998
27-inch iMac Graphics Firmware Update 1.0
http://support.apple.com/kb/DL984
Dah•veed

Apple Mini DisplayPort to VGA Adapter flickers

I have 2 Samsung SyncMaster 23 in, HD Displays connected to my Mac Mini. The Display connected via the Mini DP to VGA adapter flickers erratically. This started happening after installing the latest upgrade of OSX Mountain Lion. I called Apple support, they gave me a list of steps to try to fix the problem, which I followed to the letter, to no avail. The problem is annoying, to say the least. I tried to find out if there was a firmware update for the adapter, but I am running the latest firmware (1.03).
I would appreciate any help to solve this issue.

Thank you for your message.
1. Both monitors only have VGA input.
2. The other adapter, Mini-DVI to VGA has always worked properly.
3. The Mini DisplayPort to VGA adapter is an Apple original product I bought at an Apple store. I bought 2 adapters.
4. Actually I have 2 Mini DisplayPort to VGA adapters: The one I use with my Mac Mini, and another adapter I use to connect my Mac Book Pro to a Panasonic projector.
5. I have tried using both adapters, and the flickering problem is present using either adapter.
6. I believe the flickering problem is definitely something that needs to be addressed and solved by Apple. The adapter is its product, and should work as advertised, no matter what version of OSX I am running. Please remember that there was no flickering before I upgraded to the latest OSX Mountain Lion.
7. I do not believe buying an adapter from another manufacturer, as you suggest, would solve the problem.
Thank you for your help.

How to connect a 2009 Cinema Display with mini DisplayPort to modern card

Hello:
I am ready to install a new NVidia Quadro K5000 for Mac in my not so old Mac Pro 4,1 (2009). I already installed Mountain Lion (10.8.3) as required. The problem is that the Mac Pro came with a Led Cinema Display which apparently only can be connected with a mini DisplayPort plug and the graphics card only have DVi and DP 1.2. I tried to find an adapter but the ones I have find are minidp male to DVI female and obviously I need a minidp female to DVI or DP female.
I will appreciate any help.
Alex Sierra

The fifth and sixth item on this page are DisplayPort male to Mini DisplayPort female "Extension cables". Under US$6 plus shipping from a reputable seller:
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10246#1024602

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

No image on screen using Mini DisplayPort to VGA Adapter

Received mini today. After unboxing, read through the packet. Then began to hook everything up as directed. I used a Mini DisplayPort to VGA Adapter to connect the monitor from our now dead desktop to the mini. After double checking all connections, I hit the power button. I immediately heard the apple chime. Then the monitor showed the grey apple start up screen. Suddenly the monitor went black and said it was going into sleep mode. I can't get it out of sleep mode when connected to the mini. It is NOT the monitor or the adapter. I plugged the monitor straight into a netbook and it worked. Then, I plugged the monitor using the adapter into my MacBook Pro and also got it to work that way. So I tried replugging the adapter into the mini. Still can't get an image on the screen. I can't complete set up or use mini because I can't get an image. Any suggestions or ideas? I will call apple in the morning if I can't figure it out tonight. But I'm hoping someone can give me suggestions. Thanks for your help!

I had the same issue when I bought my mac mini last week apart from I wasn't even getting the initial grey screen. I went back to the Apple shop and they gave me another mini and fired it up in the shop using the adaptor on an old VGA monitor. It worked perfectly.
When I got home I set it all up again and still had the same issue. I nearly threw out a couple of monitors as I thought they were broken.
However, had a look around the web and found this suggestion:
Shut down the mac and disconnect the adaptor from it. Now fire the mac up and let it boot up FULLY. Once it has had a chance to boot up fully, only then plug the adaptor in.
Worked for me and I haven't had the issue since (touch wood). Hope this helps.

Using Mini DisplayPort to VGA Adapter to connect Macbook Pro (2009) for a presentation via projector.

When I connect my Macbook Pro (2009 model) using a Mini DisplayPort to VGA adapter to display a presentation via projector, only the top-left portion of what is displayed on my Macbook Pro's screen is displayed on the projector, as though I zoomed in on that portion of my screen. The projector is on and the adapter and the cable that connects the adapter to the projector machine is correctly connected. Any suggestions on how to fix this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Mini DVI to VGA or Mini DisplayPort to VGA

I've used up all the HDMI connectors on my 1080p LCD, so need to use the VGA connection, which thankfully supports 1920 x 1080 native.
I was in the Apple store today and noticed they sell both a mini DVI to VGA adapter, as well as a mini DisplayPort to VGA adapter - the latter being $5 more expensive.
Since it's converting to analog in both cases, I'm wondering if there's any potential advantage of one vs. the other.
I'm looking for the best possible picture as my new mini will be serving as my media hub, so any input is appreciated.
And I've been connecting a laptop to my TV via regular VGA up till now and it looks amazing, so not worried about going VGA instead of HDMI...
Edit: Sorry - somehow posted this in the totally wrong forum but don't see any option to move it to Early 2009 -> using the Mac mini...

Welcome to Apple Discussions!
I was half expecting to see that there would be a difference in maximum resolution between the two connectors when used with VGA adaptors, but there is not. You can get up to 2048x1536 using either. There should not be any difference in quality of output between them.

Mini displayport hdcp

Similar Messages

Maybe you are looking for