Mini Displayport issue?

Can someone tell me if there is a genral issue wiht the displayport adapter on the MacBook Pro? I hook it up to a DSP to HDMI with no signal. Then swith monitor and cable to DSP to DVI - worked great for about 1 hours, then came back and nothing. The monitor works fine on other compurtrs. ARe there any enw fixes for the DSP connector? PLease help. Thanks - DAVE

with no signal
Most displays make no distinction between:
No signal whatsovere
A signal that is out-of-range
One important intermediate step is to use:
About this Mac > ( More Info ) > Graphics/Displays...
... to see if the Make&Model of the display is seen by the Mac:
-If yes, look at resolution issues and turn off Mirroring until you get it working
-If no, then look at cabling issues, as you have not yet established a connection.
For some displays, the default approximation of DVI or HDMI signal levels is not quite good enough, and an ACTIVE [powered] adapter must be used.

Similar Messages

Mid 2010 Macbook pro - Mini DisplayPort to Hdmi issues

Hi there! I'm having some issues connecting my mid 2010 Macbook pro to my 32" Toshiba LED TV.
I'm running OS X Version 10.8.2 , as mentioned before, on the mid 2010 Macbook pro.
The issue which I have, is that when I connect my Hdmi cable to my minidisplay port through the adapter, I keep getting a blue screen popping up.
I am using a Startech MiniDisplay to HDMI Adapter Converter and ION 6FT Flat HDMI CABLE.
anyone with suggestions on help?

I had issues with getting my MBP to work with my Vizio XVT323SV via the RGB port. What worked for me was downloading SwitchResX (http://www.madrau.com/indexSRX4.html) and setting up a custom 1920x1080 resolution using the values found in the Vizio user guide. Works like a champ now. Best shareware investment I ever made. Now I can watch my EyeTV recordings at full HD resolution.
Hope this helps. Good luck!
Sidebar: I also bought the Griffin mini-DisplayPort to HDMI adapter and an HDMI cable, but I can't get any signal at all via that connection. The Mac doesn't see the TV and the TV doesn't see a signal. Very frustrating. My RGB connection is good enough but I bet HDMI would be even better.

Macbook air Mini DisplayPort to VGA Adapter connectivity issues

Hi pple,
Would like to ask if anyone is facing connectivity issues with Mini DisplayPort to VGA?
I am currently using the 2nd Gen Macbook Air with Intel HD Graphics 3000 384 MB. Sometimes when I connect to a montior (Viewsonic VA1918wm) it works fine, sometimes it just does not work and the laptop just shows me a blue screen.
I tried with out with my friend's Mini DisplayPort to VGA adapter, it has the same problem. Does this means that my macbook air mini disoaly port got a problem?
Thanks
Bryan

I am experiencing the same kind of problem... only with projectors. Some projectors will display the screen and then others wont even register with the MacBook Air.
Using an Apple Min Displayport to VGA adapter. It's hit or miss if it works. Firmware has been updated on the adapter but this did not help.
Anyone help with this?
Thanks,
Nathan.

TS3232 I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have screen flickering issues

I have the mini DisplayPort to Dual-Link DVI Adapter firmware 1.03 and I still have massive screen flickering issues on a Mac Mini 2012.
I am using a Dell 30" monitor (it's the Samsung screen just rebranded) connected to a WD 4TB Thunderbolt drive connected to the Mac Mini.
The screen is usable for the most part when I've just started the computer (although today I started having issues after a fresh restart) but if even just the screen goes to sleep, or the computer goes to sleep and I wake it later, I start to have massive flickering to black and occasionally to snow.
The effect seems to be more likely to arise when I'm on heavy graphics-intensive websites or programs (eg, Tumblr feed with lots of GIF images or working in Adobe Premiere), but once it starts shutting down those programs has no effect, the screen keeps flickering wildly.
The problem improved after the 1.03 firmware upgrade (for a while it was flickering uncontrollably ALL the time and was virtually unusable) but it has not gone away.
Any suggestions would be very welcome, either for how to fix this issue or how to get Apple to, you know, let me TELL THEM that their adapter firmware fix has NOT solved the issue, since my phone support has expired. :/

I have a new Mini DisplayPort to Dual-Link DVI Adapter to allow my original Apple 30" Cinema Display to connect to the new Mac Pro. Shipped straight from Apple, it is firmware version 1.03. I've never had flickering issues, but the display will often go black (possibly after a screen power save) and not come back. when this happens I am still able to connect to and use the Mac via remote connection. But the only way to get the screen back is either to unplug the adapter and plug it back in to the Mac, or to shut down and power up the Mac. This may be a separate issue, so I'll also post it standalone...

Mini Displayport to Dual-Link DVI Issues on 30" Cinema Display

I know this problem has been around for a while, and that there are several other discussion on it, but my goal here is to point out that even in mid-2011, this issue remains.
Here's my configuration:
30" Cinema Display
Dual-link MDP to DVI adapter with 1.03 firmware (purchased August 2011 from an Apple Store)
New-ish MacBook Pro (purchased December 2010) with Mini Displayport
Symptoms:
On dark areas of the screen, DVI noise appears (horizontal flickers of light coming and going at random)
Attempted Fixes:
Unplugging the display and plugging it back in to the computer (failed)
Restarting the computer (failed)
Tightening the connections on the Dual-Link DVI adapter (failed)
Sleeping the display and awaking it (failed)
Some suggest getting a new 27" Cinema Display with native Mini Displayport/Thunderbolt support. I actually have one, but I cannot tolerate the glare on the glossy displays, so I'm "downgrading" to a 30" Cinema Display.
Is there any remaining hope for this issue?

I still cannot understand why you would return everything... Ultimately you want this computer right? Once the bugs on the adapter are fixed are you gonna go back and re-buy it?
Seems like a lot of time spent out of spite and not for good reason. Me, this is the best Mac I've ever owned (and I've owned many. no, really.) and I'm happy to wait for this adapter w/ this machine in stead of going back to my other box.
I observed a similar client of mine w/ an iPhone... after the first week, he didn't like the keyboard and a few other things, so he took it back and went back to using his Blackberry -only to dump the Blackberry again for the iPhone, because he realized that the iPhone still did more things better than the Blackberry.
J.

Mini displayport to dual-Link DVI Adapter - flicker issue resolved

I have a late 2013 Imac 27 inch and I had a 30" Dell 3007wfp as my second monitor on the standard DVI adapter for a while at low resolution. I finally got off my behind and bought the mini displayport to dual-Link DVI Adapter... I was excited to see it in all it's glory. It immediately started flickering wildly and I thought I'd do some reading to see how I could resolve it. Pointers to making sure the adapter was version 1.03 didn't help.
http://support.apple.com/kb/ts3232
I already had it. I was getting ready to bite the bullet and just take it back when I decided to see if I had another DVI cable to swap the one I was using out "just in case". I found another one.. same length. Darn it. Then I noticed the DVI cable diameter I was using was significantly thinner than the one I found in my box of etc... What the heck? I thought.
Connected it and BOOM! Vivid colors, high resolution, no more flickers!! Issue gone. Happy days!
Thought I'd post this to possibly help the next schmoe who is in the same situation

Hello,
From the news page here...
http://xlr8yourmac.com/
See if it's related to this...
It also seems to be related to later OSX versions, like 10.8.x & 10.9.x
The 2012 macs (and later apparently) (also later OSX versions on earlier Macs can do it also), not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip
Two users reported that the opposite worked...
Try this: "sudo pmset autopoweroff 1" and "sudo pmset standby 1"

Mini DisplayPort to DVI issues

I just recently purchased the new aluminum MacBook, having previously owned one of the very last iterations of the white MacBooks.
With my old white MacBook I had purchased a Mini-DVI to DVI adapter, and was using that to connect to a DVI to HDMI cable, and that cable was going into my HDTV. I would select and check Overscan under the Display Options of my HDTV, which appeared as PDP-xx50SX under my MacBook, and two black bands would be added to the top and bottom of my MacBook's display, and I would get a full screen crisp image on my HDTV that I was very satisfied with, I would use this to view TV Shows and Movies on Hulu without any issues.
I no longer have that MacBook as a few days ago I got my new aluminum MacBook, and with it my Mini DisplayPort to DVI adapter. 4 hours ago I wanted to catch up on The Office, so I plugged in my new adapter to the Mini DisplayPort, hooked up my DVI to HDMI cable, and that into my TV, just like I did with my previous MacBook. That was 4 hours ago, and I am still unable to properly configure it like my last MacBook.
I have been beating my head for 4 hours now looking across every forum on the internet, every thread, and every possible way to type out this issue on Google to find any and all results. For some reason I just do not get the Options tab like I was able to on my old MacBook where I could then select the Overscan checkbox.
This is really frustrating, I've tried every possible combination of resolution, mirrored and not, and nothing works like it did with my old MacBook. I simply cannot get a correct full screen image on my HDTV.
Is this a firmware issue? Has it already been addressed and I somehow missed it? Is there any fix? Is this the cause of DisplayPort? Why wouldn't nVidia's 9400m be able to do the same thing Intel's GMA X3100 did? So many questions, and I didn't know where to turn to so I came here to the Apple Support forums hoping I'd get some resolution or reassurance this is something that will be/is being addressed. The only fixes I've seen online are programs like SwitchResX or DisplayConfigX, but I'm not that technically savvy and would rather not fry my screen, especially when it worked perfectly out of the box with my older MacBook. Help!

I am also frustrated by the new display port. I have purchased a DisPort to DVI connector from the Apple store and the pin configuration is different than previous all other Apple adapters (DVI-I). The 4-ins around the blade are missing in the new adapter. The genius bar said in Orlando that the new adapters are a new version of DVI called DVI-D. So all my previous investment cabling is hosed. I was away from the home 20 so I purchased yet another $29 VGA adapter from the Apple store to complete my mission.
Moral of the sad story - Buy a DVI-I to DVI-D adapter if you own and use a MacBook for presentations. The Apple Store does not carry them.
Hey wait a minute is this tied to the disappearing Firewire connector???
Mike
PS - I was ablt to find a DVI-D to HDMI connector that I will try when I get back home...stay tuned!!

17" MacBook Pro to 30" HD Display issue using Mini DisplayPort to Dual-Link DVI Adaptor.

Just replaced the Western Digital hard drive on my MacBook Pro with a SSD now running Lion 10.8.2, (updating from Snow Leopard latest version).
I have a 30" HD Apple display monitor and very much love using it.
The issue.
The MacBook Pro will only allow the 30" Monitor to display its top resolution when the unit is closed, when it is open it shows either 2 screens or mirrored screens depending upon the settings, but not at the top resolution capable by the monitor.
Now, when I was using Snow Leopard on the previos hard drive, I could close the MacBook Pro and put the computer to sleep also putting the 30" Monitor to sleep, I could then wake the computer while it was closed with my external keyboard and the screen would wake showing the FULL resolution possible on the 30" Monitor.
Then I could open the lid of the MacBook Pro and the screen would stay black allowing ONLY the 30" HD Monitor to be used effectively as a desktop computer, without the complication or need to display 2 screens or mirrored screens but most importantly the fans wouldn't need to work overtime due to the MacBook Pro being closed cutting off vital ventilation through the 2 air ducts to the left and right of the keyboard.
For some reason I cannot do this with Mountain Lion, the compluter needs to be closed in order for the 30" Monitor to display top resolution, and the fans are working overtime and the unit is getting really hot.
My concern is that the MacBook Pro will overheat, the screen will be damaged as the MacBook does get exceptionally hot when running design and audio packages, even Adobe Flash sets the fans off, and lastly the computers speakers are muffled which is more of a moo point.
If anyone could shed some light or offer a solution I would be most appreciative.
My specs:
MacBook Pro 17" Mid 2009 3.06 Intel Core Duo, 8GB 1067 MHz DDR3, NVIDIA GeForce 9600M GT 512 MB, OS X 10.8.2 - connecting to an Apple 30" HD monitor with a Mini DisplayPort to Dual-Link DVI Adaptor.
Thanks
Christian Zav

Thanks for your quick reply! I want to think I'm not technically challenged, but... are you saying to go from minidisplay on macbook directly to the firewire in the back of the monitor? Or should I try to attach it to that ugly bunch of cables at the end of the monitor cable (dvi, usb, firewire and the power adapter thingy)? Either way, it seems like I might need yet another cable? Like Mini-display to... ?
I feel like my mother asking these questions... At any rate, when I called the guy at apple support last time he acted like it was a Miracle that I had anything on my cinema display at all if I had a minidisplay cable plugged into the thunderbolt port. He said that didn't work (but obviously it did, at least a little) I DID get a picture, it just wouldn't display at the 2560x1600 resolution. More like 1680xsomething. fuzzy and big. I want my pretty picture back.
Thanks so much for your help.

Mini displayport to vga issue

I am trying to connect my MBP to multiple projectors(via vga distribution amp) using the mini displayport to vga adapter. It will recognize and correctly connect to each projector individually but will not connect to all simultaneously. Have a macbook w mini dvi to vga adapter that works fine both individually and simultaneously but for some reason the MBP will not. any help would be greatly appreciated.

I bought my Mini DisplayPort to VGA Adapter last May and only had the chance to use it now for my presentation. When I connected the cord of our LCD Projector to the Mini DisplayPort to VGA Adapter, it didn't work. I thought the cable was problematic and so I used another one but it still didn't work. After my presentation, another friend used the same cable and her Mini DisplayPort to VGA Adapter for MacBook. Her Mini DisplayPort to VGA Adapter worked. She said she just connected the Mini DisplayPort to VGA Adapter to the cord of the projector and it already worked. Is my Mini DisplayPort to VGA Adapter problematic or is there something I forgot to do that's why it didn't work? It's the first time for me to use it and can I have it replaced just in case it really isn't working?

Apple Mini DisplayPort to VGA Adapter flickers

I have 2 Samsung SyncMaster 23 in, HD Displays connected to my Mac Mini. The Display connected via the Mini DP to VGA adapter flickers erratically. This started happening after installing the latest upgrade of OSX Mountain Lion. I called Apple support, they gave me a list of steps to try to fix the problem, which I followed to the letter, to no avail. The problem is annoying, to say the least. I tried to find out if there was a firmware update for the adapter, but I am running the latest firmware (1.03).
I would appreciate any help to solve this issue.

Thank you for your message.
1. Both monitors only have VGA input.
2. The other adapter, Mini-DVI to VGA has always worked properly.
3. The Mini DisplayPort to VGA adapter is an Apple original product I bought at an Apple store. I bought 2 adapters.
4. Actually I have 2 Mini DisplayPort to VGA adapters: The one I use with my Mac Mini, and another adapter I use to connect my Mac Book Pro to a Panasonic projector.
5. I have tried using both adapters, and the flickering problem is present using either adapter.
6. I believe the flickering problem is definitely something that needs to be addressed and solved by Apple. The adapter is its product, and should work as advertised, no matter what version of OSX I am running. Please remember that there was no flickering before I upgraded to the latest OSX Mountain Lion.
7. I do not believe buying an adapter from another manufacturer, as you suggest, would solve the problem.
Thank you for your help.

No image on screen using Mini DisplayPort to VGA Adapter

Received mini today. After unboxing, read through the packet. Then began to hook everything up as directed. I used a Mini DisplayPort to VGA Adapter to connect the monitor from our now dead desktop to the mini. After double checking all connections, I hit the power button. I immediately heard the apple chime. Then the monitor showed the grey apple start up screen. Suddenly the monitor went black and said it was going into sleep mode. I can't get it out of sleep mode when connected to the mini. It is NOT the monitor or the adapter. I plugged the monitor straight into a netbook and it worked. Then, I plugged the monitor using the adapter into my MacBook Pro and also got it to work that way. So I tried replugging the adapter into the mini. Still can't get an image on the screen. I can't complete set up or use mini because I can't get an image. Any suggestions or ideas? I will call apple in the morning if I can't figure it out tonight. But I'm hoping someone can give me suggestions. Thanks for your help!

I had the same issue when I bought my mac mini last week apart from I wasn't even getting the initial grey screen. I went back to the Apple shop and they gave me another mini and fired it up in the shop using the adaptor on an old VGA monitor. It worked perfectly.
When I got home I set it all up again and still had the same issue. I nearly threw out a couple of monitors as I thought they were broken.
However, had a look around the web and found this suggestion:
Shut down the mac and disconnect the adaptor from it. Now fire the mac up and let it boot up FULLY. Once it has had a chance to boot up fully, only then plug the adaptor in.
Worked for me and I haven't had the issue since (touch wood). Hope this helps.

External display via Mini DisplayPort to DVI no longer works with MacBook.

I had not used my external monitor in the last several weeks. I believe there have been a few OSX Lion updates since the last time I used the external monitor. I had installed all the updates prior to connecting my external monitor again. However, a few days ago I tried to connect the external monitor and all I get is a "No Signal" message on my external monitor. The Mini DisplayPort to HDMI works on my LCD TV, so I know the MDP works. I have also replaced the MDP-to-DVI cord and the external display still doesn't work.
I connected the external monitor to another computer running Snow Leopard and the external monitor works. So, the external monitor does work.
I have seen a few posts aboout this, but nobody seems to have a solution that works or is directly on point to my issue. I have tried to use all the scenarios for plugging in the external monitor and external monitor power. I tried to reboot the laptop with and withoout the external monitor connected. Same thing with the exteernal monitor plugged in and no power, etc. Nothing works. I have tried to repeatedly turn the external monitor on and off while connected to the MacBook. Again, that doesn't work.
So, I am open to any help someone may have. Here is what I am running:
MacBook, Aluminum 13" Late 2008
OSX 10.7.3
NVIDIA GeForce 9400M

While we all have MacBooks in this forum most of us don’t run Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer. Lion seems to have problems with external monitors. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion

Connect 24" Cinema Display with Mini DisplayPort to new 21.5' iMac

I'm having a bit of an issue attempting to connect my new 21.5' iMac to my Apple Cinema Display. The display has a mini DV port that used to connect into my MacBook Pro but now I see there is no such port on the iMac. They clearly state they offer support for it but I don't see a way to connect. Any suggestions?
Message was edited by: dbmtx

Well, a bit confused here, maybe TB...
http://www.apple.com/thunderbolt/
19. How do I connect my Mini DisplayPort monitor or monitor using a Mini DisplayPort adapter to my Thunderbolt-equipped Mac when I have other Thunderbolt devices connected?
When connecting a Mini DisplayPort display or a display using a Mini DisplayPort adapter to a Thunderbolt peripheral (except as described in question 14), make sure the display is connected at the end of the Thunderbolt chain. You can use only one Mini DisplayPort device in the Thunderbolt chain.
Note: Systems with more than one Thunderbolt port, like an iMac, can have more than one Mini DisplayPort monitor or monitor connected with a Mini DisplayPort adapter connected as each Thunderbolt port can support one Mini DisplayPort display.
http://support.apple.com/kb/HT5219?viewlocale=en_US#12

Trouble with 30" HD Cinema Display using Mini DisplayPort to DVI Adapter

I bought a new MacBook Pro and I am having trouble getting the full resolution to work with my 30" HD Cinema Display (purchased in 2007 max resolution 2560 x 1600) using a Mini DisplayPort to DVI Adapter.
According to the specs page, http://support.apple.com/kb/SP581 , the max resolution of the HD external display is supported. Unfortunately the max that I can set it to is: 1280 x 800
Has anyone else had the same issue?
If this isn't resolved I'm likely going to exchange my MacBook Pro for one that can support this display.

So I went and bought the Mini DisplayPort To Dual-Link DVI Adapter as suggested and it seems to work great.
Now the problem that I have is when I open up Apple's DVD player, the screen is blank but I can still hear audio.
If I unplug the display, the movie will display properly. Rebooting with the display plugged in doesn't help either. I also deleted all the DVD players enc setting files so that they would re-initialize but no luck.
Any idea what this problem might be??
Chipset Model: NVIDIA GeForce GT 330M
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x0a29
Revision ID: 0x00a2
ROM Revision: 3532
gMux Version: 1.9.22
Displays:
Color LCD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Mirror: Off
Online: Yes
Built-In: Yes
Cinema HD:
Resolution: 2560 x 1600
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Rotation: Supported
Adapter Type: Mini DisplayPort To Dual-Link DVI Adapter
Adapter Firmware Version: 1.03

Mini DisplayPort to VGA isn't working. It won't recognize any external monitor. It worked just fine with my older spring 2011 MacBook Pro running Snow Leopard, but now with my brand new 2012 MacBook Pro running Mountain Lion, it no longer works

I just bought a new MacBook Pro this summer and was all excited. But I'm very frustrated right now because I can't connect to any external monitors through VGA. My thunderbolt (DisplayPort Mini) to HDMI works just fine, but when I try with my other connector to go from Thunderbolt (DisplayPort Mini) to VGA, Nothing works. my screen goes blue and changes size like it recognized something but nothing is ever detected on the external moniter or projector. I'm not sure what is wrong but it's very frustrating. I'm just very depressed that it worked just fine with my 2-year-old MacBook Pro but isn't working now. I'm running OS X 10.8.2. I just upgraded yesterday from 10.8.1 but that upgrade did nothing to fix my problem. Can anyone help? Thanks

I am haveing this exact same issue. I have plugging in 3 monitors and tried two different VGA to mini displayport and nothing is working. I recently bought a Acer monitor and it work for an hour and now it back to doing the same thing.
When I plug the VGA adapter in to the monitor the monitor think its not connected to a computer then when disconnecting the VGA adapter the monitor thinks it is connected to a computer.
NEED SOME HELP!!! at the point of all my hair is pulled out.
^^^
that is the same problem i am having! if anyone can help that would be great i'm losing my mind over here

Mini Displayport issue?

Similar Messages

Maybe you are looking for