Mini displayport/ thunderbolt

my mac mini which has been running fairly strong for a year and a half finally had a problem, the mini displayport finally went or so it seems. I plugged my adapter that converts mini displayport to vga in to the mac and my monitor wouldnt see any information. i took my mac mini to another maoniter repeated the proccess and nothing happened. it isnt the end of the world becaus eluckily macs have hdmi ports in them. ps i also tested the adapter and cable on my macbook pro 13 inch 2012 and it worked. Whats going on?

Hi.
Start in the Finder Menu bar, and click  > About This Mac > More Info... > System Report...
Under the Hardware heading, there should be a sub-heading called Thunderbolt. When you select that, does the System recognize and display the information for the Thunderbolt port?
Also, check the sub-heading for Graphics/DIsplays... information for the GPU and connected displays is shown there... yes?
If either of these is not recognized, consider Resetting the SMC.
I hope this is helpful.

Similar Messages

USB Hub in Dell U3011 not working over Mini-DisplayPort(Thunderbolt) when it did with previous MBP

My previous MBP, a few years ago - the first generation with Thunderbolt - was able to generate a USB connection over Mini-DisplayPort with my Dell U3011. My late 2013 MBP is able to send display and audio, but seems unable to detect the USB hub in the monitor. I am on 10.9.4. Any thoughts or suggestions?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Mini Displayport to Dual-Link DVI Issues on 30" Cinema Display

I know this problem has been around for a while, and that there are several other discussion on it, but my goal here is to point out that even in mid-2011, this issue remains.
Here's my configuration:
30" Cinema Display
Dual-link MDP to DVI adapter with 1.03 firmware (purchased August 2011 from an Apple Store)
New-ish MacBook Pro (purchased December 2010) with Mini Displayport
Symptoms:
On dark areas of the screen, DVI noise appears (horizontal flickers of light coming and going at random)
Attempted Fixes:
Unplugging the display and plugging it back in to the computer (failed)
Restarting the computer (failed)
Tightening the connections on the Dual-Link DVI adapter (failed)
Sleeping the display and awaking it (failed)
Some suggest getting a new 27" Cinema Display with native Mini Displayport/Thunderbolt support. I actually have one, but I cannot tolerate the glare on the glossy displays, so I'm "downgrading" to a 30" Cinema Display.
Is there any remaining hope for this issue?

I still cannot understand why you would return everything... Ultimately you want this computer right? Once the bugs on the adapter are fixed are you gonna go back and re-buy it?
Seems like a lot of time spent out of spite and not for good reason. Me, this is the best Mac I've ever owned (and I've owned many. no, really.) and I'm happy to wait for this adapter w/ this machine in stead of going back to my other box.
I observed a similar client of mine w/ an iPhone... after the first week, he didn't like the keyboard and a few other things, so he took it back and went back to using his Blackberry -only to dump the Blackberry again for the iPhone, because he realized that the iPhone still did more things better than the Blackberry.
J.

Adapter for Mini DisplayPort.

Hello. Can someone please advise what would be the best choice from the Mini DisplayPort to HDMI adapter on a market?
I use to try the famous like they saying Moshi adapter and after 3 month it wouldn't connect!

elmantm wrote:
Hello. Can someone please advise what would be the best choice from the Mini DisplayPort to HDMI adapter on a market?
I use to try the famous like they saying Moshi adapter and after 3 month it wouldn't connect!
There is no "best" choice. Almost any mDP to HDMI adapter will do. I always recommend monoprice.com for adapters, cables, and other components. Their quality is just as good and far cheapr than name brands and apple-branded stuff. This is similar to paying big buks for Monster cables when a cheap equivalents will work just as well.
Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support
You are talking about digital connections, not analog. It either works or doesn't, period. There is no "gray" area here.
One final point about mini-displayport plugs. Are you constantly inserting and removing the plug? If so it is very easy to not plug the mini-displayport plug all the way in. It may look firmly seated but isn't. Another concern about these adapters with pigtails. They can easily either fatigue or the connections of the pigtail to the plug break if bent or twisted to far or too much. And finally if you are constantly pulling out and plugging in I personally always have the concern about the wear and tear on the socket itself. They are soldered in and mounted but I think they may not be the toughest mounts in the world and could loosten over time and break solder joints.

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Does Thunderbolt work with the Mini Displayport to DVI adapter?

I just ordered a new 13" MacBook Pro with Retina Display to replace my Mid-2010 15" MacBook Pro. I've been using the Mini Displayport to DVI adapter to extend my screen to an older 20" Cinema Display. From what I can find online, and I'm here asking for confirmation, I should still be able to use the Mini Displayport to DVI adapter with the new MacBook Pro's Thunderbolt port. Correct?

still be able to use the Mini Displayport to DVI adapter with the new MacBook Pro's Thunderbolt port. Correct?
Yes.

How can I connect my 27 in display that has a Mini Displayport out (male) to my early 2011 MacBook Pro with a Thunderbolt in (female)??

I purchased a 27 inch display and am struggling to find a simple way to convert the Mini Displayport that leaves the display to my 13 inch MBP that has a Thunderbolt input? I cannot seem to find a simple adapter or cable. The Mini Displayport is connected to the display and cannot be removed. The mini displayport cable fits into the Thunderbolt plug....but does nothing. Any solution is appreciated!

It should work plugged into the Thunderbolt port. No adapter is needed. Is the plug pushed in all the way (no metal showing)?
Is the display's power cord plugged in to a power outlet?

Connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?

Hello Fellars,
Is it possible to connect a Thunderbolt Display to a mid2009 MacBook Pro with mini Displayport?
Best regards,

That means i can either buy a new Macbook WITH Thunderbolt AND a Thunderbolt Display or
use my 2009 Macbook Pro with Displayport and an older Display??

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine

Mini-Displayport to DVI adapter not working, but Mini-Displayport to VGA and Thunderbolt work fine.
This is a brand new MacBook Pro (15-inch, mid-2012) just received. I suspect that this is a hardware problem as:
The mini-displayport to DVI adapter and the external monitor that I am utilizing connect and operate just fine using my older MacBook Pro (mid-2010) with the same OS.
The new MacBook Pro powers the external monitor with a mini-displayport to VGA adapater without issue.
The new MacBook Pro powers an Apple Thunderbolt display without issue.
Both MacBook Pro's are running OSX Lion 10.7.4.
The only combination which does not work is the mini-displayport to DVI adapater used in conjunction with the brand new MacBook Pro (mid-2012).
All adapters and components (mini-displayport adapters) are Apple retail adapter.
I have tried several external monitors, including my Dell U2412m.
When I connect the mini-displayport to DVI adapater to the new MacBook Pro (mid-2012), nothing happens. The external monitor reports "no signal" and attempts to go into sleep mode. Using the "Detect displays" button has no effect, even when used multiple times. Rebooting does not help, nor does resetting the SMC or PRAM.
Any other suggestions before I take it to the Genius Bar?

I turns out that the logic board of my MacBook Pro was faulty (despite being brand new).
I took it to the Apple Store, presented the problem, and one of the Tech's came to the same conclusion that I had -- hardware failure. Phone support was no help in the matter (and even told me that what I was trying to do wasn't a supported option, which is rediculous). However, the Genius Bar did take care of the problem, and my MacBook Pro was back to me with a replaced logic board within a few days.
Hope that htis helps.

Target Display Mode - Thunderbolt to Mini DisplayPort?

I have a MacBook Pro which has a Mini DisplayPort and I connect this to the Mini DisplayPort on my 27" iMac and use Target Display Mode.
I am interested in the MacBook Air but there is no longer a Mini DisplayPort and I want to be able to go into Target Display Mode on my iMac. Is this going to be possible ie can I connect the Thunderbolt port on a MacBook Air to the Mini DisplayPort on my iMac and go into Target Display Mode? If possible, are the cables available yet?
Thanks
Tony

Yes, you can use the Thunderbolt port (which doubles as a Mini DisplayPort).
And yes, the cable (Thunderbolt/Mini DisplayPort) is available.
You can probably use your existing cable for Target Display Mode, just not for connecting Thunderbolt devices to your MacBook Air.

Mini-DisplayPort to VGA adapter & other thunderbolt devices

I currently use the mini-DisplayPort to VGA adapter so that I can work on a large external vga monitor.
Will this work if the adapter terminates the chain or will I need to connect the adapter directly to the laptop thus preventing me from using any thunderbolt devices?

I was just thinking.. It is possible that belkin is support the miniDisplay in that port as well.
Yeah, that was my thinking as well...
The matrox dock is going to have DVI on it, but it doesn't support chaining (i.e. it only has 1 TB port)
Does your external monitor support DVI - let me go look at the Matrox - ugh - don't like it compared to the Belkin.
They're BOTH expensive and, as I don't believe that either is shipping, I'd have to wait on someone else to do the beta testing.
I've never tried a USB>DVI adapter - here are a few from my favorite adapter/cable company, though.
Good luck,
Clinton

Display Undetected: Cintiq 12WX to iMac via DVI + Mini Displayport Adapter Thunderbolt

Hello all. I'm connecting my Wacom Cintiq 12WX to an iMac 27-inch, Late 2013 (brand new) via a DVI cable connected to the iMac's thunderbolt port with a Mini DisplayPort to DVI adapter. Returning a "No Sync" response on the tablet, iMac is not detecting the display.
The cable is DVI-D (Dual Link), the adapter is DVI-D (Dual Link), and the port on the Wacom appears to be DVI-I (Dual Link) except with a vertical socket for "Analog Ground" connection which is missing in DVI-D – but from my understanding this shouldn't be an issue. Could be wrong, not my area of expertise.
However, in the past I have used this device with a Late 2008 Macbook and a DVI to Mini DVI adapter to the Mini DisplayPort, back when Apple was pre-Thunderbolt, same cable and it worked like a charm.
I've contacted Wacom's support, but they usually take a day or two to get back so I'm hoping someone here can shed some light.
Thanks in advance.

yeah thats how I connect my 24" dell
minidisplayport is the same connector as thunderbolt

HT3382 With a MacbookAir (mid-2012) using a mini DisplayPort to VGA adapter plugged into the Thunderbolt port, can you configure the external monitor to FULLY display in portrait mode yet keep the built-in display in landscape mode?

With an 11"-inch Macbook Air (mid-2012) using a mini DisplayPort-to-VGA adapter plugged into the Thunderbolt port:
Can you configure an extended desktop with an external monitor (20") displaying full portrait mode (1200 x 1600 resolution) and keep the built-in display in landscape?
I'd like to see something like
External monitor / Built-in display

Yes, I can't see why not.
Just give it a try and report back if you have a problem.

Can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro

can I put a Moshi Mini DisplayPort to HDMI Adapter (with audio) in a thunderbolt port in the new macBook Pro, will it work?

Should work perfectly.

HT3492 What do I need to do to use the iMac as a monitor from my HP laptop? I have my HP connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

What do I need to do to use the iMac as a monitor form my HP laptop? I have my laptop connected to the Mini DisplayPort to VGA adapter which is plugged into a Thunderbolt port.

vga may not be a compatible port
https://discussions.apple.com/thread/2246912?start=0&tstart=0
more hits
https://www.google.dk/search?source=ig&hl=da&rlz=1G1TSEH_ENDK367&q=use+imac+as+m onitor+for+pc&oq=use+imac+as+mon&gs_l=igoogle.3.0.0l10.2417776.2420497.0.2421354 .15.11.0.2.2.0.316.1723.0j4j3j1.8.0...0.0...1ac.-OkFwmTKBg0

Mini displayport/ thunderbolt

Similar Messages

Maybe you are looking for