Mini Droid closes contacts periodically after upgrading to new OS, Just got the phone and its the only problem
This only started when I did the upgrade to the new OS. I have disconnected Google Sync contacts, thinking that was the case, but it still does it periodically
Any help would be appreciated.
Hello parejf63!
I'd love to get to the bottom of this! First, let me clarify this for you. When you say that your device closes contacts, do you mean that when you are looking at one of your contacts, the device closes the page and takes you back to the home screen? Please elaborate for me and provide me with some additional data.
Thanks,
ChristinaB_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic) -
My 3G unlocked iPhone is not syncing mail or contacts from my mac book pro, using Lion. I am able to get a calendars and music, only. I get the message that I need to reset the password which I have done 3x's on the phone and on the Apple server.
Good to know that, but what can I do to get the mail and contacts downloaded from Icloud onto my Iphone? I am told that the password needs to be reset and I have erased and reset it 3x's already? Should I Restore All Settings or Restore Network Settings or will that result in a situation where I have to have it re-unlocked again? GRACIAS!
-
am using iphone 3gs and updated it to ios 6.1.3, after this when i restar the phone and put the sim back it said that your phone cant be avtivated because the server is temporarily unavailable, my sim is also undetected. what should i do now please help.
If your iPhone was hacked/jailbroken to use a different carrier then the update locks it back again to the original carrier.
-
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
?
after the third time of replugging it into my computer it now says i have to restore it. is there anyway to avoid this????? please help
-
my ipad mini is in recovery mode after upgrading to ios 7. When i tried to restore it through itunes it says an error occured in restoring ... please help.......
Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times. -
All Contacts Deleted After Upgrade to 4.2 and Sync
I just upgraded to iOS 4.2 on my iPhone 4. I have my contacts set to not sync to the computer, instead relying on backups of the phone. After the upgrade I got a text and noticed that the name was not displayed, only the number. When I looked in my phone favorites the names displayed for a split second and then went to numbers. It appears that either the upgrade or the sync deleted every one of my contacts. When I tried to restore from the most recent backup (today) it was the same story, no contact information. I have to restore the phone to the backup before the upgrade, from October.
I don't want to sync the contacts to the computer because it will mess up several of my wife's contacts. Is there a way to import the contacts from the October backup in to today's backup where it mysteriously deleted them? I only have them stored on the phone and in phone backups. Also, shouldn't it warn me if a sync is going to change or remove a significant amount of information stored on the phone?
Thanks in advance...Seeding as iOS 4.2 is not available to the general public and is a beta problems may occur when installing. Since it is only available to developers, one would assume you're a developer and the dev forum would be the right place to post issues.
-
i had a iphone 3gs on contract which ended so i upgraded to 4s. had the 3gs cleaned as a second phone for my partner. i then allowed the sync between the 2 so whatever was on mine would be on the other and vise versa. this meant the contacts was aswell so i deleted them not knowing they would be removed from both, i then tried a backup to icloud to restore the lost canotacts instead it seemed to clone my new 4s from my old 3gs and now the features on the 4s wont work. music and tunes have been lost along with all my messages
please help mePlug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
HT201412 after upgrading to newer iOS version 6 only my iphone 4 got turned off.
hi ,
after upgrading to newer iOS version 6 only my iphone 4 got turned off. it could not turned.. contacted apple store they tried all the option .. solution was replace with other iphone4 by paying £119, Which is really not the new one, its refurbished one..So what's your question?
-
After upgrading to IOS 7 on my iPhone 4 and iTunes 11 on my PC, I plugged my iPhone into my PC and got the error message that I needed to install iTunes 11 on my iPhone. Any suggestions?
You got it downloaded and I assume you mean it is installed as well. It was buggy for me.
I had to close and restarted iTunes before I could use it properly.
Then, I had to unplug and replug in my phone before it recognises it.
Just had to try everything. As final choice, update over the air. I try to avoid it as it tends to have more problems than a tethered update. -
I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten
1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi. -
After upgrading to Mountain Lion from Lion, Mail, Safari and Note need about five minutes to start.
After starting, Mail answers are very very slow. The same for Note. Instead of, sending mails is only a bit slower than before upgrading.
In Safari, I choose Goggle as starting page in Preferences, but at every restart misses that starting page and the search strip says "Seek Google or instert an address".Well, I found the solution here in another thread.
i just want to mention that the samw thing was happening also for the notes and the reminders apps!! (they quit unexpectedly!!).
So I found the solution here.
Thank you graphicsluc!!! -
After upgrading to Yosemite my mac doesn't shut off. The off button doesn't work
After upgrading to Yosemite, my mac doesn't shut off. The off button no longer works. I want to shut the thing off.
Jehreth,
On my Macbook Pro you have to hold the power button down a moment till a little window pops up and asks what you would like to do. Also you can go to:
( ) Menu > Shut down ...
to shutdown your Mac. Or are you saying that these options do not work?
Hope that helps,
Weston
Supporting article,
OS X Yosemite: Log out, sleep, restart, and shut down -
After upgrading to iOS5 & everything was restored,I couldn't find the downloaded movies I had before.I kept on syncing it with iTunes.I can see videos are taking up space on my Ipad 2 memory in the iTunes page but it doesn't appear,only songs appear on the Music.thank you in advance for your assistance..
They are now in the videos app!
Maybe you are looking for
-
Adobe [Acrobat] 9 distribute forms issue
I'm trying to distribute forms through adobe [Acrobat] 9 and I can only send the form to people in my address book through Acrobat.com as an attachment, but not as a link. However, I can send a link to the form to people not in my address book via A
-
Question reg. modifying latest record in internal table
Can you tell me if it is possible to modify the last appended record to the internal table? I just want to modify the record in the internal table which is appended at the latest. Please tell me the logic for this. Thanks a lot, Krishen
-
Standard program for calling shipping smartform
hi can anybody tell me wats the standard program which calls the shipping smart form from transaction VT03N
-
Digital Potentiometer control in Labview with Field Point Unit
Hi.. I need some help on programming the LABVIEW to control the digital potentiometer. It is AD7376 which 4 channels are used to control the digital potentiometer, and Field Point Unit FP-DO-403 thr. RS232. – Channel 0 (POT_D), Channel 2 (POT_CS), C
-
10gR2 to 11gR1 on win2k3R2 with new Hardware
I am going to upgrade from 10gR2 ee to 11gR1 ee on new hardware. Both are win2k3R2 32bit. I would like to only install 11gR1 software on the new box and drives. My question. Do I only have the exp/imp option to move the db or can I copy (backup/resto