Mini DV Camcorder

Hello, I have an old analog camcorder, and am ready to purchase a mini DV camcorder. I am interested in transferring to i Movie and then edit and burn DVD's. I have been told that the Canon ZR series is excellent for compatibility with i Movie. Does anyone have any recommendations on what to purchase? Thanks, Jim

Jim,
I'll be the voice of the other side, since so many here have bragged about Sony.
I love my Canon Elura 100. I read its review on camcorderinfo.com, and it was well reviewed there. Canon brags that their 1/5 CCD is bigger and better than competitors' 1/6 CCDs. Also, the Canon website would have you believe that their widescreen mode uses the entire CCD, as opposed to other brands that create a false widescreen by cropping the top and bottom of the frame. Go to Canonusa.com for their side of the story. Compare it to the reviews on camcorderinfo and believe what you wish.
To avoid Canon's infamous dislike of "daisychaining," I connect the Firewire directly to my Mac Mini, rather than importing into my external hard drive. I have not had to disconnect the external drive in order to use the Canon; they have coexisted peacefully.
Another thing I like about Canon is the software that comes with it. They make sure that their photo software is Mac compatible. Of course, you don't need anything outside of iLife. But I have had occasion to use the Canon photo software in cases where it could do things that iPhoto/iMovie couldn't do, especially for AVI video clips. Please note that this was for features of my still camera; I have not used the Canon software for any DV footage, and the movie software that comes with the camcorders is NOT Mac compatible. It is the photo software, Image Capture, that I have occasionally used.
I don't work for Canon or receive any compensation for praising their products. I am just a happy consumer who has acquired a degree of brand loyalty based on good experience.
Of course, feeling is believing. It really is important to go to a store and check out the camcorder's controls. You have to decide if you want the controls on the flip-out viewscreen, if you like more or fewer buttons on the back of the body, etc. The design of the Canon ZR series differs from the Elura. Camcorderinfo's review harshly criticizes the layout of the Elura. While I can't argue with any of their points (they are all based on fact) I can say that it hasn't interfered with my use and enjoyment of the camcorder. It really comes down to personal preference.
To convert your old analog footage you need to get a model that has analog input or AV/DV passthrough. I have used my camcorder to capture old analog Super 8 tapes (VHS, too) to mini DV tape, imported to iMovie, and created a DVD. The Elura will convert straight from analog to the Mac (without using a DV tape), but I wanted to update my old footage on DV tape, so I chose not to use the passthrough feature. [From a quick glance at the Canon website, it seems that only the ZR 700 model has the analog to digital conversion feature. The Elura is gone from their list, but still may be for sale at retailers or online stores.] You may also consider a model that has an input for an external microphone. Many models do not; the Elura 100 does.
Both Sony and Canon mini DV camcorders have a good reputation and will work well with iMovie. Just be sure you get the features you need and that you can live with the camera's controls.

Similar Messages

  • How to connect my mini-dv camcorder to new imac with no firewire

    I have a Sony Mini-DV camcorder (Handycam) and used to connect it via firewire to my last iMac.
    My new iMac doesn't have firewire - just thunderbolt & usb.
    Is there a way I can use this camcorder on my new iMac? Are there adaptors, etc.?
    Thanks.

    As far as I know, all recent iMacs still have a firewire 800 port.
    So you would need a firewire 400 to 800 adapter.
    21.5" and 27" iMacs ports
    One model here:
    http://www.sonnettech.com/product/fw_adapter.html

  • Connecting MacBook to Samsung Mini DV Camcorder

    I have a MacBook and I would like to get my videos from a samsung mini DV camcorder. How can I do this?  I don't have firewire port on MacBook.  I tried buying a firewire with USB end and it does not work.  Please help.

    Sadly you need a MacBook that has Firewire.  USB 2 camcorders exist, but all of them compress video before sending it via USB.  The newest MacBook Airs and Pros are compatible with Thunderbolt which can be converted to USB 3 which doesn't have the capacity of bandwidth issue, but can interfere with WiFi.   Firewire and Thunderbolt are far better standards to deal with.  
    And there is no way to directly convert a Firewire to USB signal or vice versa.
    If your mini-DV camcorder records to media directly on the Camcorder such as mini-DV discs. http://www.macsales.com/ offers tray loading DVD drives that may be able to read those discs.

  • Help me choose a mini dv camcorder

    I've been trying to decide between the Kodak Zi6 and the Canon ZR900. I've never used a camcorder before but want to be able to edit frame by frame I have a brand new iMac and am enrolled in the one to one program so I will be able to learn how to use iMovie. The canon costs $100 more.
    Any thoughts?

    If you are looking specifically at mini-DV camcorders, you will see that individual makes / models are not listed on the "iMovie '09 Camcorder Support" page.
    There is only the generic statement:
    "+iMovie '09 works with most Mini DV tape-based camcorders that use a FireWire cable (also known as IEEE 1394 or i.Link) to transfer data. iMovie works with DV (standard definition) or HDV (high definition) formats.+"
    So, it sounds to me like you better get one with a Firewire port, and then take a gamble that it will work with iMovie '09. Perhaps a thorough web-search can answer the question.
    I am fairly sure I will be buying iLife '09 soon. My Canon Elura 100 (mini-DV) camcorder works flawlessly with iMovie HD ('06), so I have my fingers crossed regarding '09.

  • I captured from mini-dv camcorder to FCP7 using control from my computer and firewire. I cannot find the file or clips I transferred anywhere except for in Finder. How do I get the clips from Finder to FCP7. Also I did not see audio on the computer meters

    I captured from mini-dv camcorder to FCP7 using control from my computer. I only find the capture clip in Finder. How do I get the clip in Finder to FCP7.
    Also my audio in the capture was not showing up on my audio meters on my computer-is this normal. Thanks

    you will not see the audio meters from within fcp move while capturing. 
    If you only see the captured clip in the finder, not within fcp, there's something wrong.  You might try deleting your fcp preferences
    https://discussions.apple.com/docs/DOC-2491

  • Mini-DV Camcorder V. DVD Camcorder?!

    I want to buy a camcorder but I'm not sure if it should be a Mini-DV Camcorder or a DVD Camcorder. What would be most compatible with iLife 04 and my computer in general, (statistics below).
    I have two in mind: Sony Mini-DV DCRHC24E and the Sony DVD105.

    iMovie likes to take take video from the device via iLink (Sony speak) or Firewire (Apple speak). The DCR-DVD105 doesn't have iLink/Firewire so to use that you'd have to insert the DVD in to the iMac and then import to iMovie (you may have to perform some conversion too depending on the format Sony are using). 
    Should you move up to a new iMac with a slot-loading disk drive the camcorder would become useless as you can't put an 8cm disk in the new iMacs.
    Of course the disadvantages of the DCR-HC24E MiniDV version is that tapes of course need re-winding etc. Note that the MiniDV version doesn't have DV in which means you can't archive projects back to tape. I'd advise looking for a model with DVin and DVOut.
    You might wish to post in the iMovie forum too as the users there may have further experience.
    regards
    mrtotes

  • Connecting a Samsun Mini DV Camcorder VP-D381

    Hi there. I'm trying to capture footage from a Samsung Mini DV Camcorder Model VP-D381. I'm using Premiere Pro CS3. When I go into the capture window it says capture device offline. I'm using a IEEE 1394 Firewire connection on my Desktop PC, however when I plug both ends of the cable into the camera and the PC, my system (Windows XP) does not recognize the new hardware. Are there some drivers I need for my Firewire card? My camcorder did not come with any drivers and I cannot locate any online. Any help would be greatly appreciated. Thanks

    This is highly contradictory.
    the camera makes a noise to let me know it's connected. It's just the windows isn't recognizing that anything is plugged in.
    Is it recognized or not, that is the question. DOES WINDOWS RECOGNIZE THE CAMERA? Whatever sounds the camera makes, whether it whistles, burps, cries or whatever is not relevant.

  • Connecting a JVC GR-240 Mini DV camcorder to iMac

    Hello,
    I am completely new Mac user, having used recently decided to ditch my home Dell Pc in favour of a Mac. I have tried to connect my JVC GR-D240 mini DV camcorder to the iMac via the firewire port. Neither iMovie HD (which I downloaded) or iMovie08 seem to recognise the camera – the only source they allow is the build in iSight camera. The camcorder is placed in play mode, but nothing happens.
    I can connect the camera to my old Dell PC, record to avi and then copy this to the Mac, but this is not an ideal solution as I am getting rid of the PC soon.
    Any help would be appreciated.
    Thanks.
    PS – I have one of the new silver iMacs.

    Hi Philip,
    connect the cam, switch it on and start the System Profiler (About this Mac menu).
    Look into Hardware/Firewire, there you will see the firewire bus and your cam should be shown.
    If this is not the case, then there might be something wrong with your installation or your mac.
    You could also download the Firewire SDK from http://developer.apple.com/sdk/
    There you will find the AVCBrowser in the applications folder of the SDK. I don't know but it might be possible that you also have to install xcode, which you will find on your DVDs shipped with the mac. Connect the cam, start AVCBrowser and you cam should be shown. In the Browser you can check a lot of thinks on the cam.
    I had only one problem with a Sony with dead fw-port, but as yours still works with the Dell it seems to be somethink on the mac side.
    Try repair permissons and have a look into /var/log/system.log, if you find anything about firewire there post it.

  • Mini DV Camcorder to Firewire 800?

    Currently I have a mini DV camcorder that feeds into the Firewire 400 port of my old iBook.
    Now want to upgrade to the new Macbook Pro but it doesn't have a firewire 400 port
    Can I put the Mini DV output into the Firewire 800 port on the Macbook Pro?

    Not with the cable you have. You need to get a 9-pin Firewire 800 to 4-pin Firewire 400 cable. Anything on the page below should work for you. I've purchased cables from this company before, I'm really happy with their service.
    http://www.firefold.com/9-Pin-to-4-Pin-C53.aspx
    Cheers!

  • Connecting Sony Mini-DV camcorder to Mac..

    I have a Sony Mini-DV camcorder that I'm trying to connect to my Mac so I can save some video i've taken. The Camcorder is about 5 years old. The only output ports it has are: a really small USB, a slightly larger square looking port that says
    i DV under it, and the old yellow audio/video out. I connected the camcorder via a mini usb converter to one of the regular usb ports on the back of my mac and nothing happens. It doesn't even recognize that something has been plugged in... Is there anything I can do to connect this camcorder to my Mac???

    Hi
    A. As Lennart writes but there are in some cases two FW-Cables depending
    on how the FW-port looks on Your Mac
    either a
    • 4-pi to 6-pin FireWire Cable - or -
    • 4-pi to FW-800 connector FW-Cable
    Some new Macs only have the FW-800 port eg MacBook-Pro
    B. On some Cameras You need to look into the Camera menu and set DV-out
    so the Camera port gets active.
    Yours Bengt W

  • Mini DV camcorder to macbook HELP!

    I have a new Macbook Pro and a Sony Handycam Mini DV camcorder. How do I import videos to IMovie '08? I do not have a firewire on my macbook? Is there a way to use USB, or is there something I can purchase so I can connect Firewire to my mac?

    A MacBook Pro has Firewire. If your firewire cable does not fit, you might have Firewire 800. Check your /About This Mac/More Details.
    If it is Firewire 800, you need a 4 pin to 9 pin firewire cable, which you can easily order online, or get locally at, say, the Apple Store or a Radio Shack.
    If you have a MacBook, and not a MacBook Pro, it may not have Firewire. You may want to return it to Apple and get a MacBook Pro, or a White MacBook, both of which have Firewire.

  • Samsung Mini-DV Camcorder And iChat AV

    I have a samsung SCD103 Mini-DV Camcorder and I was wondering, is it possable to use the USB Steam function on Tiger with iChat AV? I want to be able to video chat with my friends. But I don't know it it would work. Would it?

    I need some kind of USB stream, becasue if i'm in firewire mode, it is recording to my computer...
    Have you actually tried it on a Mac? Your Mac won't record anything unless you open an application, like iMovie, and tell it to start recording.
    Perhaps you should post your question in the iChat AV forum since your question is not, technically, related directly to a Mac mini? There are quite a few people in there who may have a suggestion for you.
    -Doug

  • Premiere CS5 (win7 x64) won't recognize my Mini-DV camcorder.

    I have Premiere Pro CS5 installed on a Windows 7  64-bit system.
    When I try to Capture, I keep getting the error message:  "Can't Activate Recorder. Try Resetting Camera."
    the whole set-up worked fine on my XP system with Premiere Pro 1.5.
    Extra info:
    The Mini-DV camcorder is a Panasonic NV-DS33   (but personally I think it has nothing to do with my camera because I have seen so many threads online regarding this issue and no-one has any decent answer!)
    the firewire cable is fine because it works on my old XP computer.
    in premiere, if I change the camera to an HDV, then suddenly I can CONTROL the camera, but I can't capture)
    Windows 7 (x64 bit) recognizes the Camcorder in the Device Manager (and says it is working properly).
    I have tried several other DV capturing softwares (Stoik, Scenalyzer, WinDv). I have even tried my old Premiere Pro 1.5 on my 64-bit system.. and NONE OF IT WILL CAPTURE MY CAMCORDER!
    This is very frustrating. I need my new win7 (x64) Premiere CS5 to capture successfully. I have spent a LOT of money on this new system. What on earth is the problem?
    (i saw one thread on a similar issue regarding a 32-bit installation of Win 7, and it is marked as ANSWERED! but in my opinion, (from the amount of forums on many other sites) this issue is definitely not fixed.
    is there any update to Premiere CS5? or a workaround? or anything else I should know?
    PS: it is not an option for me to keep using my old computer to Capture video and then transfer it to my new system. i am passing my old system on to another person.
    many thanks
    Marc
    [email protected]

    I agree that the "Legacy" FW driver solution should be a stickie, or FAQ. Since Win7-64 was released, it has caused no end to the grief. Maybe Jeff, or Todd will have a better solution to getting the word out.
    It was Harm Millaard, who brought that to MY attention, and he's posted it to many, many threads. In nearly every case, it's solved the issue.
    Good luck, and thanks for reporting Colin's success,
    Hunt
    PS - per your suggestion, I just published this "fix" in the Tips & Tricks sub-forum for PrElements.

  • Sony Mini-DVD Camcorder

    I recently bought a mac book pro and I have final cut express. I am trying to hook up my sony mini dvd camcorder to my computer so that I can capture my footage off of my camcorder to make movies. Any suggestion would be helpful. Thanks

    "No matter how competent FC / FCE is, it is still a very small minority with respect to the numer of professionals actually using it. Adobe might be counting on gaining market share by being able to announce AVCHD support before Apple, and given that the majority of users out there do not use FC/FCE and that more an more Mac users are new users / switchers, it might not be such a bad plan if Apple is typical Apple and slow to adopt new technology (but getting it mostly right when they finally do move)."
    I'm not quite sure what some of this means, and I think much of it is quite wrong. If, by the first sentence, you mean that only a small minority of professionals use Final Cut. This is quite inaccurate. It is by far the most widely used video editing software on the planet. Far exceeding Avid, Media 100, Premiere or any other available software. Avid is strongly entrenched in film production and primetime television, but that accounts for a minute proportion of all video production worldwide. I would also disagree that Apple is slow to support new technology. Apple was the first software with professional DV editing, native HDV editing, DVCPRO 50 and DVCPRO HD via FireWire, the first to support DVX 24p and 24pa, and while it might have have been the first to support IMX and XDCAM, it wasn't far behind. It was slow to support native JVC HDV 720p editing, but that's about the only area in which it was not a leader, and it only happened because Apple wanted to edit the material natively as it did Sony 1080i, coupled with the Intel issue. AVCHD is very new technology, and its use of delivery format, 15 frame GOP-based compression for acquisition presents huge issues for any editing applications. Not something that can be turned around in a couple of weeks or even months. One thing that has greatly slowed down the development of video editing application interface functionality over the last few years has been the constant stream of ever-changing formats introduced by camera manufacturers. This has meant that less and less time has been available to actually work on the software. In Apple's case this has been further complicated by the move to Intel-based hardware, and the necessity to port all its software to a new architecture. This has not slowed Apple's development and support for new formats, but it has greatly delayed feature enhancements, in my view. Personally I feel, at this stage, it would be better for the pro apps to work on core issues and enhancements rather than continue development for yet another format, particularly a problematic consumer format. Panasonic is developing a professional format AVCHD Intra that might be supported on the pro apps before the consumer version.

  • What's a great, affordable Mini-DV camcorder to buy for Final Cut?

    I just got a MacBook Pro and Final Cut Express. What's a great Mini-DV camcorder to buy if I was to get my feet wet with video editing? I've just graduated from film school, looking to make short films and short documentaries. Does anyone know what a good entry level camera would be and what type of equipment I'd need? Thank you so much, I'm on my own in this so any help I could get would be great!

    hey there RohanRuin, welcome to Discussions!
    what you get should be determined by your needs/project & your budget... if you just completed film school don't you have some idea of the features & capabilities of cameras & other tools necessary to shoot clean usable footage. anyway.... any prosumer Sony, Panasonic or Canon will be a good buy as they have manual controls as well as automatic, they also have features being left out on lo-$$ consumer cams, such as mic in, headphones out, analog to digital conversion. JVC & Canon HDV cams have interchangeable lenses.
    a solid tripod that works w/ your cam(size & weight), lights & stands-will it be "guerilla" lighting that you cobble together from your local Home Depot, or will you buy Lowell instruments in a 3-5 piece kit? ....softboxes? you'll need/acquire all sorts of stuff as you progress in your career. i still have/use a few of the reflector shop lights i got when i began 25 years ago to shoot small projects 'cause that's what i could spend. also think about some sort of external mic-ing so as not to record cam noise. there's more but i think you need to assess your needs & budget first.
    i use Sony mini DV & HDV cams, & depending on the project, a compact audio mixer, Shure & CAD mics. iighting instruments w/ barndoors & gels, foamcore reflectors, a couple of battery-powered on cam lights. a cheap lav that works for interviews,... get the most cam that you can (3-chip over one-chip) so you can continue to use it for a few years, a good lav mic if you'll need it or a good stick mic, boom & stand, maybe a couple of halogen shoplights are my starter suggestions.
    good luck.

Maybe you are looking for