Mini-DVI to S-Video resolution

I've plugged my Mini-DVI to S-Video adapter into the MacBook, but there is only limited selection of resolutions available in the NTSC/PAL preference pane. My Mac mini S-Video adapter has options for 16:9 output, but the MacBook only lists the following (none are 16:9 resolutions):
640 x 480
720 x 480
720 x 576
800 x 600
1024 x 768
Any ideas how I can get the MacBook to output 16:9 widescreen via the S-Video adapter?
Thanks very much, Rich

Thanks namke, had no idea that rectangular pixels were employed to achieve widescreen on a TV - you learn something new everyday!
I wondered what other MacBook users get when they plug in the mini dvi to s-video adpater because 16:9 resolution is an option when a DVI adapter is plugged into my Mac mini (e.g. 1024 x 576), but not my MacBook.

Similar Messages

  • Mini DVI to S-video and composite giving complete distorted output!!

    I tried to hook up my 20" Sony Trinitron either through S-video or composite to the powerbook without any success. I got completely distorted picutre. I have tried all the video resolution setting that is available on the Displays reference window with the same result. Does anybody out there run into this problem at all.

    I have a 12" PowerBook 1.5ghz and had the same problem with garbled video today. When I plugged in the Mini-DVI > Composite/S-Video adapter the PowerBook would consistently think it was attached to an ordinary VGA monitor, and could not sync with the television. This caused a B&W, warped, split in half picture.
    I took the adapter back to the Apple store, plugged it into one of their demo units, and saw it behaved the same way. They gave me a replacement and everything has been fine since.
    QS2002, 1.4ghz, 1gb, GeForce 4 Ti4600, SATA; 12" PB 1.5ghz, 512mb   Mac OS X (10.4.4)  

  • Mini-DVI to S-Video Adapter doesn't work

    Hi, I am using the Mini-DVI to S-Video adapter from apple to connect my macbook to the TV. But the only thing I get is a grey flickering picture on my TV. When I click on the monitor-button I can see that my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display. I tried all different resolutions, but needless to say it doesn't work.
    Can the adapter be broken, or is there a problem with the macbook?
    Macbook white 2 GHz Intel Core Duo 1GB RAM   Mac OS X (10.4.8)  

    my macbook detects only a monitor (but not a TV) in addition to the macbook-LCD-display
    If you connect the Mini-DVI to S-Video adapter, the monitor button on the menubar should show resolutions for Color LCD in one section and NTSC/PAL in the other.
    A grey flickering picture is indicative of picking the wrong standard-PAL vs. NTSC.

  • Mini dvi to s-video adapter

    when i connect my macbook to my sanyo hdtv via the mini dvi to s-video adapter the image on the computer screen apears on the tv, but with orange stripes down it.

    At what resolution? Have you tried different ones?

  • Mini-DVI to s-video: black bar on left side

    Hi,
    When outputting video through "the mini-DVI to s-video adapter" i have a black bar on the left side of my television.
    It seems like the 1024*768 resolution is not able to completely fit the 4:3 area of my television (the image is to small).
    any ideas?
    thanks!

    I'm absolutely sure everything is displaying and that the image is not deformed in any way.
    So my conclusion is that the image is just smaller (in every dimension) than it should be and than it was before.
    I will try a lower resolution later today.
    thanks for your help and interest!

  • When I unplug Mini-dvi to S-video adapter mouse often disappears

    When I unplug my mini-dvi to s-video/rca adapter, the mouse cursor often disappears. This results in me having to restart the computer. Does anyone know how to fix this problem?

    At what resolution? Have you tried different ones?

  • Dynex mini-DVI to S-video adapter

    I bought a Dynex mini-DVI to S-video adapter with my Macbook and I just tried to use it to plug into my projector via S-video. The resolution of my screen dropped to 800x600 but otherwise nothing happened. I even followed the Max OS X help information and turned on the computer with the adapter and cable plugged in and it still didn't display on the projector. I went to the display settings in system preferences and asked it to detect displays but I don't think it changed anything either. It seems the Dynex website is rather sparse on documentation and support. Any ideas? It'd be greatly appreciated!

    I've tried pretty much everything with the same mini-DVI adapter made by Dynex.. if anyone can help it would be much appreciated!

  • Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. scree

    Not sure that I have selected the correct forum.  Hope my questions are clearly stated.
    Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices).   It does not show Mail or Safari menus.  System preferences'  display "gathered" the Samsung and chose its resolution.  I did not find a way to select the Samsung as my display.
    In addition to having old hardware, we have Verizon FIOS providing internet and TV access.  Is there any way to make this work for us?  We would like to stream video (Netflix) and view shows from the Web.  Do we need Apple TV to do this?  Or is it not possible with our old iMac?  My husband thinks that our Airport could be a factor. 
    Thank you

    Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
    There are, actually, many alternatives to choose from than just from a Mac.
    You need to have or invest in a WiFi capable router for all of these examples.
    Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
    If you have a older Mac, like I have noticed many users do, then you have other options.
    If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time,  you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
    These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
    Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
    Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

  • I am attempting to plug my mac into my tv. I am using the mini dvi to s video adapter. When I plug it in, the display goes all wonky and becomes stretched and enlarged.

    When I attempt to connect my mac to the monitor using a mini dvi to s video adapter the display becomes enlarged and stretched. I cannot seem to fix this using the system preferences or the quick keys that allow you to zoom in on the display. Any suggestions?

    I am using MAC OSx 10.5.8 (9L31a) as my operation system.  The TV says "No signal.  Check connected device's power, cable connection and source selection."  Seems to me that that goes in hand with what the Samsung tech said about the Mac needing to be forces to use the external display.  But how do I do that?

  • Mini DVI to S-video display problem

    I connect my macbook to a plasma TV using mini DVI to S-video adapter so I can give keynote presentations. All of a sudden, having not changed any settings, the plasma display went to black & white while my macbook's display remains in color. I have checked with two different s-video cables and with another TV, as well as trying to change the color display in my system preferences, but after several hours have given up. Anyone else have this problem or have any thoughts on how to alleviate it? Thanks
    Hungus

    A wire may have broken inside the mini DVI to S-video adapter. S-video uses one wire for the brightness, and one for the color information. If the color wire breaks you will get a black and white picture. Until Apple replaces the adapter, you could use the composite video output, but the picture will not be as sharp.

  • Mini dvi to Component Video adapter !

    Help !
    Where Can I Find "mini dvi to Component Video adapter" ?
    Help !

    "there is no such thing in apple store"
    I MAID,
    Begging your pardon, but I just tried the above linked Search Results, and what you seek is apparently on the list, as the search was performed exactly as you specified. You can read the description of the various items for sale and tell us what is different about the one that you need. That way we can perform a new search for you, or, in the alternative, you can search for yourself. If the Apple Store doesn't have what you want, search CompUSA.

  • Mini-DVI to S-video adapter and no colour on TV screen

    I just purchased a mini-DVI to S-video adapter for my MacBook. I want to connect it to my TV through my DVD/Video player.
    I do get a nice picture on the TV and I can manage it in the screen settings panel, BUT the TV-screen doesn't show any colour, just black and white. Why?
    I've tried several settings in the Preferences panel, but no luck. What to do?

    The cable is brand new and I've checked it with a mulitmeter. It's OK.
    I've also heard that this is a fairly common problem with S-video and I got a tip to try the composite video instead. It worked beautifully, so now I've got nice and crisp video in full colour on my TV!

  • Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

    Need to convert mini dvi to s video to run a school's Hatiachi ceiling mount projector. What is the proper adapter?

    Check the projector and see what kind of input is has, most have a VGA connector, so you would need a male to male VGA. You will also need the Mac mini dvi to male VGA (of course).
    Some of the older projetors have a component in only, which is the red,yellow,green, RCA connectors, which are avaialable. (Usually the are fairy short, 5 ft or so,  so you would need to get a VGA with yhe mini DVI to VGA, and a component (the one with the 3 RCA's) you will probaly have to get a Female to Female VGA adapter to connect te VGA to the component.
    And finaally if that weren't enough, the really old projectors have only a composite input. All I can say about that is "the hunt is on"
    Best of luck

  • Problems with Mini DVI to S-Video/RCA adapter

    Hello
    I've got a mac mini and I want to pass its image to a television (note: this television doesn't have HDMI)
    I've bought the Mini DVI to S-Video/RCA adapter, but when I connect it to my TV nothing appers (except some gray lines, which means the signal is reaching the TV, but no image)
    Thanks

    That connector may not be compatible with an Intel Core 2 Duo Mac Mini like yours.
    http://store.apple.com/us/product/M9319G/A?fnode=MTY1NDA3Ng&mco=MTA4NDU1MTE
    The Apple Mini-DVI to Video adapter is designed for use with the iMac (Intel Core Duo), MacBook*, and 12-inch PowerBook G4.

  • Mini DVI to S-Video B&W only!!

    I bought a Mini DVI to S-Video adapter and a S-video to RCA cable to hook my MacBook up to my TV, but when I plug it in I can only see it in Black and White. I checked System Prefs>Displays and tried out several different profiles, to no avail. FWIW the audio seems to be fine.
    What am I doing wrong? Thanks in advance for your assistance.

    In my experience when you try to connect an s-video source to a TV you need the TV to be able to accept s-video signals or it does come out black and white.
    One of my televisions has front inputs which consist of one s-video plus the standard three phonos. If i dont tell the tv its an s-video cable the image is black and white.I had the same kinda thing with an older tv when using a scart convertor which had s-video input. I had to use the correct scart socket which was the one that supported s-video and then tell the tv it was s-video by switching to AV2/S instead of just AV2.

Maybe you are looking for