Mini Gigabit error - 2 Pair Downshift detected
Hi,
I have a C2D Mini and all my machines are on a Gigabit network.
On the Mini, when ethernet is set up in automatic mode,the log correctly reports:
"Oct 2 13:18:46 OfficeMac kernel[0]: AppleYukon - en0 link active, 1000-Mbit, full duplex, symmetric flow control enabled"
... and the mini sends files , etc, at gigabit speeds.
However, when on automatic settings, after a random period of time, I see the message:
Oct 2 13:18:52 OfficeMac kernel[0]: AppleYukon: 00000010,00000270 skgesirq - AppleYukon: error - 2 Pair Downshift detected
Oct 2 13:18:52 OfficeMac configd[40]: AppleTalk startup
Oct 2 13:18:52 OfficeMac kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled
... and the mini functions at 100-mbit speeds.
So I changed the Ethernet settings to manual, AFTER changing the cables and plugging it into the same switch port as my other machines which are functioning normally, and all is well and the Mini functions at normal gigabit speeds.... clearly a situation I could live with so no problem for the past month with one exception.
I have the mini set to either sleep OR shut down in the evenings, and I notice in the log the following log entry every morning , when it starts up automatically or wakes automatically.
"Oct 1 06:00:33 OfficeMac kernel[0]: AppleYukon: 00000010,00000270 skgesirq - AppleYukon: error - 2 Pair Downshift detected
Oct 1 06:00:33 OfficeMac kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled"
... and the mini begins the day at 100 Mbit speeds.
This is repeatable on the Mini, but not on the other machines.
I reset the ethernet by either unplugging it and plugging it back in, or switching to airport and back again and it returns to the manual settings and it's good for the rest of the day.
Anyone experiencing this behavior? Is there a known reason for it?
If it is the port or hardware/cables/ports/plugs, it seems highly selective to me in that it only seems to happen when the ethernet panel settings are on automatic, or during automatic wake up/startup, in the manual mode (with gigabit settings selected).
Thanks for your assistance,
Jamy
Hi,
I have a C2D Mini and all my machines are on a Gigabit network.
On the Mini, when ethernet is set up in automatic mode,the log correctly reports:
"Oct 2 13:18:46 OfficeMac kernel[0]: AppleYukon - en0 link active, 1000-Mbit, full duplex, symmetric flow control enabled"
... and the mini sends files , etc, at gigabit speeds.
However, when on automatic settings, after a random period of time, I see the message:
Oct 2 13:18:52 OfficeMac kernel[0]: AppleYukon: 00000010,00000270 skgesirq - AppleYukon: error - 2 Pair Downshift detected
Oct 2 13:18:52 OfficeMac configd[40]: AppleTalk startup
Oct 2 13:18:52 OfficeMac kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled
... and the mini functions at 100-mbit speeds.
So I changed the Ethernet settings to manual, AFTER changing the cables and plugging it into the same switch port as my other machines which are functioning normally, and all is well and the Mini functions at normal gigabit speeds.... clearly a situation I could live with so no problem for the past month with one exception.
I have the mini set to either sleep OR shut down in the evenings, and I notice in the log the following log entry every morning , when it starts up automatically or wakes automatically.
"Oct 1 06:00:33 OfficeMac kernel[0]: AppleYukon: 00000010,00000270 skgesirq - AppleYukon: error - 2 Pair Downshift detected
Oct 1 06:00:33 OfficeMac kernel[0]: AppleYukon - en0 link active, 100-Mbit, full duplex, symmetric flow control enabled"
... and the mini begins the day at 100 Mbit speeds.
This is repeatable on the Mini, but not on the other machines.
I reset the ethernet by either unplugging it and plugging it back in, or switching to airport and back again and it returns to the manual settings and it's good for the rest of the day.
Anyone experiencing this behavior? Is there a known reason for it?
If it is the port or hardware/cables/ports/plugs, it seems highly selective to me in that it only seems to happen when the ethernet panel settings are on automatic, or during automatic wake up/startup, in the manual mode (with gigabit settings selected).
Thanks for your assistance,
Jamy
Similar Messages
-
SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"
Hi all,
I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
Very shortly after this opens, it then closes and nothing else happens.
Anybody have any suggestions?
Thanks!Thanks for the quick reply. Here is the Folder I am looking in:
"C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
Here is some of my opatchinstall log:
OPatchInstall: Logging all properties
OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do ¬ close applications. (A Reboot will be required.)'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
/extract:path, extracts the content of the package to the path folder
/log[:path to log file], enables verbose logging for the update installation
/lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
/quiet, runs the package in silent mode
/passive, runs the update without any interaction from the user
/norestart, prevents prompting of user when reboot of machine is needed
/forcerestart, forced restart of machine once update is complete
/?, shows this help message'
OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
OPatchInstall: Property 'PATCH.LANG' value '1033'
OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
OPatchInstall: Property 'SYS.LANG.RTL' value '0'
OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
OPatchInstall: Property 'SYS.WIN.VER' value '601'
OPatchInstall: End of all properties
OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionExtractFile
OPatchInstall: CActionExtractFile::initFromElement starts
OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
OPatchInstall: CActionExtractFile::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionExtractFile::execute starts
OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
OPatchInstall: Successfully retrieved the data location and size
OPatchInstall: CActionExtractFile::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: Executing CConditionBooleanOperator::evaluate
OPatchInstall: The property 'SYS.ERROR.INERROR' exists
OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptEULA
OPatchInstall: CActionPromptEULA::initFromElement starts
OPatchInstall: No action list for quiet UI specified
OPatchInstall: No Accept button specified
OPatchInstall: Cancel button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionPromptEULA::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: Executing action
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
OPatchInstall: Evaluation of the condition complete, the result is true
OPatchInstall: Executing the IfTrue list
OPatchInstall: CActionIf::execute starts
OPatchInstall: Begin evaluation of the condition
OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
OPatchInstall: Evaluation of the condition complete, the result is false
OPatchInstall: Executing the IfFalse list
OPatchInstall: CActionPromptEULA::execute starts
OPatchInstall: Running in full UI, will show the EULA dialog
OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
OPatchInstall: User Accepted the EULA, executing the Accept action list
OPatchInstall: Finished executing the Accept action list
OPatchInstall: CActionPromptEULA::execute ends
OPatchInstall: Done executing the IfFalse list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing the IfTrue list
OPatchInstall: CActionIf::execute ends
OPatchInstall: Done executing action
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPromptFolder
OPatchInstall: CActionPromptFolder::initFromElement starts
OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
OPatchInstall: CActionPromptFolder::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionCreateFolder
OPatchInstall: CActionFile::initFromElement starts
OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
OPatchInstall: CActionFile::initFromElements ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt
OPatchInstall: CActionPrompt::initFromElement starts
OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
OPatchInstall: No action list for quiet UI specified
OPatchInstall: OK button specified, parsing actions
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: Finished parsing actions
OPatchInstall: CActionPrompt::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQuit
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CActionIf::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionQueueExtractFile
OPatchInstall: CActionQueueExtractFile starts
OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
OPatchInstall: CAtionQueueExtractFile ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionPropertyDefined
OPatchInstall: CConditionPropertyDefined::initFromElement starts
OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
OPatchInstall: CConditionPropertyDefined::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionSetProperty
OPatchInstall: CActionSetProperty::initFromElement starts
OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
OPatchInstall: CActionSetProperty::initFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionIf
OPatchInstall: CActionIf::initFromElement starts
OPatchInstall: CConditionStatement::CreateStatementFromElement starts
OPatchInstall: Creating statement CConditionEqual
OPatchInstall: CConditionStatementComparison::initFromElement starts
OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
OPatchInstall: CConditionStatementComparison::initFromElement ends
OPatchInstall: CConditionStatement::CreateStatementFromElement ends
OPatchInstall: CAction::CreateActionFromElement started
OPatchInstall: Creating CActionPrompt -
Bioshd2..i have been having a problem with this bioshd2 error..no drivers detected..
The comp is an hp 6530f.the first time the prob occured was when my dad unpluged the computer from the surge protecter..upon restart,it just says boot failure insert system disc and press enter.when the comp..was orriginally purchased there was no recovery disc and i never made one.when i do a diagnistic it says bioshd2 error no drivers are detected..i tried changing bios settings and a few other things and nothing.so i turned the comp off and the next day turned it on and it booted up normally.the comp worked fine for about a week then one day my dad moved the comp a few inches to check somthinig behind it when the comp suddenly started to shut down by itself..and when i tried to turn it back on, i got the same thing. bioshd2..idont think my hd is bad because it came back on but what could be causing this problem..i tried alot of different things, even taking the battery out for 12 hours to reset bios and nothing..i left it alone for about a week and when it was turned on again it booted normally.now it is working but im afraid of it happening again..ive looked at all of the wires in the comp and dont see any faulty wires..i checked the power supply because when my dad moved it it shut off so i figured it was that but power seems to be working fine.ive been trying to perminetly fix the problem for weeks now and i dont know what else to check..any help would be awsome thanks.
If the motherboard is touching the case it could cause problems. A short in a wire could cause problems as well.
I don't want to say toss the computer around to see if it happens again, but unfortunately it's one of those things that you might not discover it happens again for another month. At that point you can start with changing out the cabling, it's a rather cheap inexpensive fix, then inspect the motherboard, look to see if there is any point where the board could be making contact with the case.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical. -
An Error occurred while running detection with sharepoint 2013 SP1
hi,
I am trying to install SP1 for MS SharePoint 2013. after starting the wizard am getting "An Error occurred while running detection" error. I have ran SharePoint config wizard to troubleshoot it. still same problem persist.
my current SP build version is 15.0.4551.1508. I think SP1 is applicable on SP build versionn15.0.4569.1000.
How I can upgrade 15.0.4551.1508 to 15.0.4569.1000
any have idea on how to resolve or troubleshoot this issue ?
ThanksHI NIkhil,this should be because you miss some of the previous versions in your farm.please try below to resolve the issue
http://expertsharepoint.blogspot.de/2013/10/the-excepted-version-of-product-was-not.html
The version 15.0.4551.1508 is DEC-CU 2013 to upgrade 15.0.4569.1000(SP1).
TRy download the second release of SP1 released by MS and install.
http://expertsharepoint.blogspot.de/2014/06/service-pack1-for-sharepoint-2013.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
I have recently bought a Mac Mini and tried to pair the new apple wireless keyboard with the Mac but after trying 6 times no luck. What can I do about this?
try this method:
You need at least a USB mouse. If you don't get any option to pair a keyboard, click through the setup until you get to the "Create Your Computer Account" screen, right click in any of the text fields and select Substitutions --> Show Substitutions. From there click on text preferences. The preferences pane will popup and from there you can just click the back button (next to show all) to get to the full preferences menu. Next click on keyboard, then select setup bluetooth keyboard and you're golden. -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
How long it takes to repair an Apple iPad with the error "sim card not detected". The ipad is in Apple since 19 January and still has the status "Repair in Progress".
There is no way any fellow user here can know anything specific about your repair status. You will need to call Apple and ask them yourself.
-
Problem deploying application - ERROR: No j2ee modules detected
Hi
I am new to jDeveloper, and I have created a stateless session EJB, and a JSF page with one ADF component on. When I try to deploy my application to Weblogic, I get this error:
ERROR: No j2ee modules detected in EAR archive. Deployment aborted
Any ideas what I can do to fix this?
Thank you
SørenHi, I had this same problem. The whole purpose of a EAR is containing a J2EE app. It's divided on a Web Components Archive (WAR) and a JAR with the Enterprise App. I found this document useful and the app could be deployed successfully to an EAR. Remember to include all you extra libraries as another file Group of the "Libraries Type". Basically you owuld have to separatelly create the WAR deployment descriptor, the EJB JAR deployment descriptor and after that create the EAR based on one or two of them.
[http://download.oracle.com/otndocs/tech/ias/portal/files/RG/OBE/deployToAppServer/lesson_Deployment.htm|http://download.oracle.com/otndocs/tech/ias/portal/files/RG/OBE/deployToAppServer/lesson_Deployment.htm ]
This document is intended for Jdev10g and OracleAS 10, but the procedure is almost the same for both versions. -
Error : A cycle was detected in the classpath of project
Hi, When I build a scheduler program, I get the below error
A cycle was detected in the classpath of project:
Error A cycle was detected in the classpath of project: EPD_APMDM_Dkmsted.com EPD_APMDM_Dkmsted.com
Error A cycle was detected in the classpath of project: EPD_APMDM_DLibWrapted.com EPD_APMDM_DLibWrapted.com
Please help
Thanks
Prabhu.M...The issue has been resolved.
I was referring the jar files in 2 places , one in Wrapper and another in Portal DC.
I removed the reference from Wrapper and issue got resolved
Thanks -
When performing the new iPhone(IOS6) update I received an error message - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes. Will I lose everything if it goes back to factory settings. Right now my phone wont do anything. It is just showing a cable, an arrow and the iTunes logo.
If you restore from backup.
You should have made sure that everything was on your computer bef ore updating anyway. Did you fail to do that?
All pics taken with iphone should be imported to your computer regularly as you would with any digital camera, most especially before any update/restore/etc. Did you fail to do that? -
I received an error message; We have detected an incompatible display driver.
I received an error message; We have detected an incompatible display driver. All my display drivers are up to date. How can I find out which display driver is not compatiable? How can I fix this issue?
oleg_skriabin
Did you realize that you posted in a 2 year old thread?
What version of Premiere Elements do you have and on what computer operating system is it running?
Are you having a problem with the following error message?
We have detected an incompatible display driver--please update
If so, you might want to start your own new thread on your specific issue in your specific computer environment, including
details.
Have not seen the above error message respond to your suggestion
Try to make your monitor screen resolution higher
so it will interesting to learn of the details of your situation.
ATR -
Error message -ITunes has detected a problem with your audio config...HELP
error message - itunes has detected a problem with your audio configuration. audio/video playback may not operate properly...
ive gone through the itunes support steps such as reinstalling quicktime and itunes and nothing seems to work... itunes still open...but then nothing plays...please help meI've cobbled together a few ideas courtesy of some posts made by the inimitable b noir concerning this particular problem .
First ...
... let's try swapping out your QuickTime, taking a few additional explicit precautions this time.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
Next ...
If you're still getting the message with a fresh quicktime in place, let's check to see if something is awry with your sound card.
Open your "Sounds and Audio Devices" control panel. Click the "Audio" tab. Is the correct default device showing up in the "Sound Playback" area? -
How to get duplicate interchange ICN No when error 26: Duplicate interchange detected
Hi
I have been getting error 26: Duplicate interchange detected while i have EDFACT Interchange processing property check
for duplicate UNB5 (Interchange control number)= 30 days.
Now I need to get information for interchange no with whom it has been detected duplicate. Please
assist me to get this information
Kapil KaushishHi Kapil,
Alongwith this error you also get another error, check the event log which has details like interchange Id, Sender Id and receiver Id.
Also on error, Interchange/Transaction sets are suspended based on configuration done on Local Host Settings-->Inbound Batch Processing Option. So you can check the suspended message for the details as well.
Maheshkumar
S Tiwari|User
Page|Blog|BizTalk
Server : Fetching UNB and UNG Segment Values From Interchange Envelope and Mapping -
Datasynchronisation: Error Queue message conflict detected.
Any idea what the cause of error queue message "conflict detected" could mean?
It happens with a dml operation update, version 207 for one date field.
If i go to record details there seems to be no records and there is the message:
* Field names inside <> are primary key fileds.
Any one got this problem before?press HELP at error queue page :)
Synchronization conflicts are resolved by the MGP using the relevant conflict rules. All modifications are applied to the server tables and the transaction is committed. If the conflict rule is "Server Wins", then an error queue record with the message CONFLICT DETECTED is also generated to let you know that a conflict occurred and this rule was applied. A conflict that is resolved by the conflict rules is not rolled back. You can choose to override the conflict resolution performed by modifying the error queue record for a conflict and re-executing the transaction.
A Mobile Server synchronization conflict occurs if:
The client and the server update the same row. This error is resolved by the Mobile Server by the conflict rules, but is logged in the error queue for you to see the result. You can choose to modify the result.
The client and server create rows with the same primary key values. This error is resolved by the Mobile Server, but is logged in the error queue for you to see the result. You can choose to modify the result.
The client deletes the same row that the server updates. This error is resolved by the Mobile Server, but is logged in the error queue for you to see the result. You can choose to modify the result. -
Compile error std::pair . Is copy ctor call missed?
#include <vector>
struct A {int a;};
struct B : public A {char b;};
int main()
B b;
typedef std::pair<A*, A*> MyPair;
std::vector<MyPair> v;
v.push_back(std::make_pair(&b, &b)); //compiler error here(pair<B*,B*>)
return 0;
}error : formal argument x of type const std::pair<A*, A*> & in call to std::vector<std::pair<A*,A*> >::push_back(const std::pair<A*, A*> & ) is being passed std::pair<B*, B*>
There should not be any error because 1) std::pair<B*,B*> created 2) std::pair<A*,A*> from 1. copy-created.The default libCstd is not fully conforming to the C++ standard. In particular, it is missing features that require class member templates. The issue is discussed in the C++ FAQ section on library compatibility:
[http://developers.sun.com/sunstudio/documentation/ss12u1/mr/READMEs/c++_faq.html#LibComp]
You can use the optional STLport library, which has this missing functionality, by adding the option -library=stlport4 to every CC command line, compiling and linking. You cannot mix libCstd and STLport in the same program. If you use STLport, everything must be compiled using STLport, including any libraries linked to your program.
Maybe you are looking for
-
Problem with using two different apple IDs on the same iPhone 4s
my friend installed an app on my iPhone 4s using his apple ID. Then I created an apple ID for my own use. I then installed an app on my iphone. But, there's a pop-up box containing my friend's ID and asked me to put his password. How can i use my own
-
[2011-12-28:10:54:16] Runtime Installer begin with version 3.1.0.4880 on Windows Vista x86 [2011-12-28:10:54:16] Commandline is: -playerVersion=11,1,102,55 -sandboxType=remote -securityDomain=airdownload.adobe.com -https=false -fromUserEvent=false --
-
warning: Supported source version 'RELEASE_6' from annotation processor 'org.eclipse.persistence.internal.jpa.modelgen.CanonicalModelProcessor' less than -source '1.7' Note: Creating static metadata factory ... An annotation processor threw an uncaug
-
Do I have to pay $299 for a DUNS number? Why won't the $49 version work?
I'm trying to register as a company to build a for-profit application and launch it in the iStore. It says I have to apply for a DUNS number which is fine, I understand about building business credit and establishing ourselves as a reputable entity.
-
I just got a new Droid Maxx & I can't install any apps. I can see the apps in the play store, but when I hit install... nothing happens.