Mini ipod menu and play buttons are not working
My ipod menu button has not worked now for a few months. I can't get back to my main playlist and choose certain things, I just have to listen to the all the songs. Now the play button is not working either, its working to turn on-play-pause, but not to turn it off. So it stays on till the battery goes dead. Help Please-anything!!
HP Pavilliain Windows XP
See this.
How to reset the iPod if it appears frozen or doesn't respond.
It may take quite a few attempts and is best done connected to power.
If this doesn't work, try restoring the iPod to factory settings.
However, it seems as if it may be a hardware problem and need service.
Similar Messages
-
The forward, back, refresh, and stop buttons are not working. Even after installing the latest Firefox update. Also my home page stopped loading upon startup even tho I have it setup to do so. Anyone else experiencing these issues? This is my second request for help and of course, Firefox on-line support is always closed.
Those are all symptoms of a problem with the places.sqlite file, for details see http://kb.mozillazine.org/Locked_or_damaged_places.sqlite
-
hey there, my ipad had a dialogue box pop up on the screen and the buttons are not working so i cant exit out or type. PLease help me
Perform a Reset... Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
HT1430 iPhone 4s keypad the "o" and return button are not working - solutions?
iPhone 4s keypad, the "o" and the return button are not working. Upgraded the software, now the "o" works in the verticle position only, and the return works in the horizontal position only. Help!
Hi, VRS77.
Thank you for visiting Apple Support Communities.
I would start with closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close. Test the results after processing these steps.
iOS: Force an app to close
If the issue persists, here are a couple addition troubleshooting steps I could recommend.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Hope that helps,
Jason H. -
<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=693097&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have another kind of problem with Firefox
== Description
==
I am not sure what happened or how this happened but, for some reason my back and forward buttons are no longer functioning. I have uninstalled and re-installed firefox twice and updated the Torbutton but yet, it is still now working. I can;t find answers from your forum.
== This happened
==
Every time Firefox opened
== earlier this week
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Show in Finder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
CoolPreviews
3.1.0521
true
Cooliris
1.11.6
true
[email protected]
Torbutton
1.2.5
true
Modified Preferences
Name
Value
accessibility.browsewithcaret
true
accessibility.typeaheadfind
true
browser.history_expire_days.mirror
180
browser.history_expire_days_min
5
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.google.com/
browser.startup.homepage_override.mstone
rv:1.9.2.3
browser.tabs.loadInBackground
false
extensions.lastAppVersion
3.6.3
network.cookie.prefsMigrated
true
places.last_vacuum
1274131105
print.macosx.pagesetup-2
PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPCFET0NUWVBFIHBsaXN0IFBVQkxJQyAiLS8vQXBwbGUvL0RURCBQTElTVCAxLjAvL0VO…
print.print_bgcolor
false
print.print_bgimages
false
print.print_command
print.print_downloadfonts
false
print.print_evenpages
true
print.print_in_color
true
print.print_margin_bottom
0.5
print.print_margin_left
0.5
print.print_margin_right
0.5
print.print_margin_top
0.5
print.print_oddpages
true
print.print_orientation
0
print.print_pagedelay
500
print.print_paper_data
0
print.print_paper_height
11.00
print.print_paper_size_type
1
print.print_paper_size_unit
0
print.print_paper_width
8.50
print.print_printer
print.print_reversed
false
print.print_scaling
1.00
print.print_shrink_to_fit
true
print.print_to_file
false
print.print_unwriteable_margin_bottom
56
print.print_unwriteable_margin_left
25
print.print_unwriteable_margin_right
25
print.print_unwriteable_margin_top
25
privacy.cpd.siteSettings
true
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Intel Mac OS X 10.5
== User Agent
==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.5; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-Cooliris embbedded in a tab
*Gecko default plugin
*Runs Java applets using the latest installed versions of Java. For more information: Java Embedding Plugin. Run version test: Java Information.
*BrowserPlus -- Improve your browser! -- http://browserplus.yahoo.com/
*iPhoto6
*Office Live Update v1.0
*Java Plug-In 2 for NPAPI Browsers
*Shockwave Flash 10.0 r42
*RealPlayer Plugin
*4.0.50524.0
*The QuickTime Plugin allows you to view a wide variety of multimedia content in web pages. For more information, visit the QuickTime Web site.I know there are some problems with Question Slides, but I'm using them as timesavers. Building question slides yourself takes a lot more time. When I started using them, I had to find the right settings to get the results I wanted, but now mostly I do not have that much problems anymore (if the internet connection is not failing).
What are your Quiz settings: can the user have more than one attempt, do you allow Backward movement, Review possibility etc? Is the uploading to a LMS (which one), what were the Manifest settings?
Lilybiri -
My ipod touch fourth generation keyboard and unlock button are not working
my ipod touch fourth generation was working at one moment and then when i went to unlock the screen and type in the passcode it would not let me swype the unlock button and when i turned it off and back on again and the passcode section popped up it would only let me type the 1, 2, and 3 buttons and now it is not letting me type at all. What do i need to do? The screen is also cracked but when i cracked the screen i was still able to see what i was doing and still able to use the ipod but this was before the keyboard and unlock button stopped working, I dont know if the screen being cracked would have anything to do with the keyboard and unlock button not working. PLEASE HELP ME
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. Could be the crack progressed to the point thtt portions of the screen no longer respond to touch
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for $199 for 64 GB 4G and $99 for the other 4Gs. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit -
My ipod touch 4g camera and sleep button are not working? PLEASE HELP
So i hadnt used my ipod for about a week and when i used it again it wouldnt turn on. I plugged it in to a wall charger and after a couple minutes the apple logo came up. It turned on but then it didnt say it was charging, the sleep/wake button wasnt working, and the camera wasnt working. it eventually started charging but if you press the sleep button nothing happens and when you open the camera, the shutter stays closed. It was working completely well the last time i had used it. PLEASE HELP What should i do??
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
My sleep and volume button are not working. Help please!!!
I tried restoring my Ipod and it doesn't work. It worked once then i couldn't do it again. Please help.
If you only restored from backup, restore to factory defaults/new iPod. If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
-
I cant add new bookmarks and history buttons are not working
in red color lettering on the bottom right corner of the firefox windows says this: Torbutton: Please file bug report! Error applying Tor settings: [Exception... "Component returned failure code: 0x80570016 (NS_ERROR_XPC_GS_RETURNED_FAILURE) [nsIJSCID.getService]" nsresult: "0x80570016 (NS_ERROR_XPC_GS_RETURNED_FAILURE)" location: "JS frame :: file:///Users/sergioyero/Library/Application%20Support/Firefox/Profiles/xf8yysxb.default/extensions/%7Be0204bd5-9d31-402b-a99d-a6aa8ffebdca%7D/components/ignore-history.js :: anonymous :: line 98" data: no]
== This happened ==
Every time Firefox opened
== 6/8/2010 after installing it as one of the instructions on how to fix bookamrks from your forumThere is no need to install the Torbutton extension in case of problems with lost bookmarks.
You can skip that step if it doesn't apply (you do not have Torbutton in the first place).
You can uninstall that extension via Tools > Add-ons > Extensions
See also http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
The tab and control buttons are not working the Firefox browser (My browser is up-to-date). The buttons work in IE and Chrome, however, before I realized that, I even switched out my keyboard to a brand new one hoping it would solve the issue.
Thank you--there were a few random extensions I had not added (spyware, maybe?). Once I removed those the issue was fixed!
-
pls help me am using ipad air, under accesibility the mute and unmute button are not working.
Do you mean that you have Settings > General > Use Side Switch To set to 'Mute', and you have the switch on the right-hand side of your iPad, above the volume control, 'on' ? WIth that 'on' notification sounds should be muted (e.g. email notifications, game sounds etc), but the you should still be able to hear the Videos and Music apps and with headphones. Is that not happening, and if not you've tried toggling the switch on the side of your iPad on/off ?
iPad side switch : http://support.apple.com/kb/HT4085 -
Menu and play buttons unresponsive
The menu and play buttons on the clickwheel are unresponsive, the interface is otherwise fine. I cannot turn the ipod off or return to menus after selecting something. I have already tried updating and restoring the ipod, I don't know what else to do.
Contact apple with this problem. Here is the link.
http://www.apple.com/support/ipod/ -
My Ipod nano 6Th sometimes shuts down when I connect the phones, sometimes it not shuts down, but the volume and standby buttons do not work. If I not connect the phones everything works fine. But with the phones connected it goes crazy. I alredy reset, restore and nothing. If I reset and let the phones connect the up and down volumes buttons start to work. But the power/stand by button don´t. I need to disconect the phones to the power/stand by button starts to works. Anyone already have simmilar problem?
A windows error message appears saying iTunes has encountered a problem and needs to shut down.
let's get a crash log from itunes, and send it to the Apple engineers for a look.
Typically, you'll need to configure Dr. Watson on your PC in order to generate crash logs. Windows start menu -> Run. Type in "cmd". Hit return. At the prompt in the command line window that comes up, type in
drwtsn32 -i
And hit return.
This will create crash logs in Documents And Settings\All Users\Application Data\Microsoft\Dr Watson\. There'll usually be a file in here called "drwtsn32.log"
prior to collecting the itunes crash log, delete any existing crash logs in there. (we want to make sure we send the correct crash log.)
Generate the crash, collect the crash log, and and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing -
my iphones buttons are not working and it shows a black screen whith apple logo on it what should i do now?
and i have to post sth importent on instagram tonight so its ergent please help....Greetings motahare,
After reviewing your post, I have located an article that can help with iOS device issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D -
All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!
Maybe you are looking for
-
Getting Skype working on my Mac mini
I have an old-ish Mac Mini (can't remember how old, but a couple of years - 'About this Mac' says 'PowerMac 10.2), which I now would like to set up to use Skype. I have regular speakers plugged into the headphone port, but I can't figure any way to p
-
VL10 and new selection-screen fields
Hi experts. My requirement is to add new selection-screen field to second tab in VL10. After analyse many topics the solution was to copy VL10 to ZVL10. Also V50R_USEREXIT_TRANSF was copyed and there was added specific code. Furthemore note:524424 wa
-
Web Service Implementation Heavily Based on The Singleton Pattern
Dear all I have recently joined a project that is 2/3 through development of a medium sized application providing synchronous and asynchronous implementations for a number of Use Cases exposed as Web Services. The design is one that I have not come a
-
Desktop Window Manager high CPU utilization
I have several Windows 2012 servers that are showing high CPU utilization (70% or higher) coming from the Desktop Window Manager. I do not have the Desktop Experience feature installed on these machines. The interesting thing is that the process fo
-
Doubts about Temporary Table.
Hi, I am using Temporary Table. But the insert command takes too much time compare to insert in Normal table. One more doubt about Temporary Table is: Suppose there are two different users. They connect and first insert rows of their use .Now they go