Mini on 32" LCD

Hi all,
I'm seriously considering getting a Mini for use as a 'Media Hub' for my bedroom. But I know the Mini's built-in graphics leave much to be desired, but how well would it look connected to my 32" LCD? The LCD has both VGA and DVI inputs so that will help, but how good would OS X, DVD's and QuickTime movies look?
Thanks in advance.

I use mini as a media hub in my living room, attached to a 30" LCD TV, and it works great. The TV is connected by DVI... the trick it finding a resolution and refresh rate that works for both the mini and the TV. Mine is at like 1024x614, 60Hz. Your TV may want something different.
Btw, 1024x614 is well below my TV's natural resolution, and well below HD... but it's higher than the SD TV shows piped in through EyeTV, and higher than DVDs, so all my videos look great (for SD) when expanded to full screen. So unless you're watching HD stuff, I recommend setting the resolution pretty low.

Similar Messages

  • Mac mini on a LCD TV which does not support interlace mode

    Dear all,
    I am going to buy a new Mac mini and I wish to connect it to a Samsung LCD TV 37A656A1F (serie 6.
    The TV manual says that it does not support the interlace mode. I then deduce that it supports progressive mode only.
    My question: Does it mean that this LCD TV model cannot be used as a monitor for a Mac mini?
    Please give a help to me

    All computer monitors are progressive mode displays. Therefore all computers, including the mini, are very comfortable running progressive mode. It is their natural state. It is more a problem when a computer has to run interlace mode in order to support a display. That is when there is trouble. So I think you have nothing to worry about if your Samsung runs in progressive mode.

  • "Mode not supported" Mac mini connected to LCD TV via HDMI

    Hello, new mac min owner here (2.5) (September 2011).  I followed the instructions in the "hello" booklet, including attaching peripherals, such as mouse and keyboard. I also connected a Samsung LCD TV via HMDI cable - as I propose to use this as my monitor. I then switchedn on the macmini, as directed in pages 11-16 of the macmini 'hello' handbook. Unfortunately I cannot even progress to the setup assistant as my TV just tells me that the "mode is not supported" through the HDMI cable. I assume that some output settings need to be changed in the macmini to accommodate the LCD TV output range.
    My question is, how do I change these settings if the only screen I have is the screen that the macmini will not output to? Isn't this a massive oversight by Apple, given that a major selling point is the macmini's versatility?

    What you are seeing, where you can't see the edges of the image, is known as "overscan".
    This is something TVs have done forever to avoid seeing weird stuff at the edges of the transmitted frames.
    The display control in System Preferences lets you turn overscan on or off (it is a checkable item in the "Options" panel). You might need to have this checked to display video, but you sure don't want it checked to use the TV as a computer display.
    Although I have overscan OFF on my older Mac Mini, I've had the problem where sometimes after a restart the display is in overscan mode. To fix this, I can "guess" where the apple menu is off the top left of the screen, get to system preferences, check overscan to be on and then uncheck it to turn it back off. If you can't guess where the apple menu is successfully, you might try accessing the Mini from another Mac by using screen sharing. The shared screen looks correct even if overscan is on.

  • Mac Mini Newbie seeks LCD Display Info

    Hi
    Am about to purchase a Mac Mini. Wondering if I can utilise an LCD TV as my display rather than pay out for an Apple Display?
    What Max Resolution will I achieve? Will it be comparable to an Apple Display?
    Any other advice from people whom have done same?
    Thanks! All info appreciated.
    Andy

    Both items #1 and #2 can be corrected using the Gefen DVI Detective.

  • Mac mini 2014 detect lcd monitor problem

    Hi.
    about 2 weeks ago, I bought new mac mini 2014 and dp - vga connector.
    I have mitsubishi rdt179s lcd monitor.(17') , d-sub port + dvi-d port.
    I must to use d-sub port.
    when I open display menu, my monitor spec is different.
    only " display 13.9 800x600 ".
    how can I fix this? to 17' and 1280x1024...
    ty for read...

    Try installing and using one of these apps
    SwitchResX – The Most Versatile Tool For Controlling Screen Resolutions On Your Mac
    Display Menu from Mac App Store

  • Brand New Mini / Brand New LCD Projector

    Just bought a Mac Mini 1.42 GHz with the 80 GB hard drive and the Combo drive. I just opened the box and plugged it into my brand new Panasonic PT-900U LCD projector and nothing. No video. Nothing at all.
    It seems many people are having video problems with the mini. What's the deal? Will this mini work with my brand new projector? My PowerBook works instanly with the projector. I don't have a monitor to test the mini with at all. I have no way of knowing if the mini is even booting as I can't see a thing.
    Can I hook the mini to my PowerBook? HELP!!!

    Snap-
    Can you also plug something else, like a computer, into the projector and verify that it is working? And if you had another monitor to plug into the mini I would try that as well.
    I do not know what your trouble shooting expertise is, so please excuse me if you have tried that already. But it would help to narrow things down to the actual culprit.
    -DaddyP

  • Blank screen, Intel Mac mini, Samsung P23700 LCD monitor; HELP!?!

    I just got a new 23" Samsung LCD monitor and hooked it up to an Intel Mac mini. Turning on the system results in a blank screen with the monitor simply displaying a dialog box that seems to show that it is trying to figure out if the incoming signal is digital or analog. This dialog box is on for a few seconds and then the monitor goes to sleep. The monitor realizes that there is a signal coming in; As soon as I disconnect the DVI cable I get the standard "Check Signal Cable" on the monitor's screen. I don't even get the initial white screen on the Mac boot up. nothing. just the monitor's confused signal identifying dialog.
    I've tried connecting the Mac mini to the monitor with a DVI to DVI cable and a DVI to VGA to DVI connection, with the same result.
    I've also tried the monitor with an older PowerPC based Mac mini with the same result.
    Both Macmini's work with out a problem when connected to my 32" LCD TV with a DVI to HDMI cable.
    I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm; I think that fact has been the most painful part of the process up to now.
    The windows machine's screen set up that worked was 1280x800 at 40Hz. I can't get a resolution like that on the Mac's display settings. I've only been able to hook it up to the LCD TV, and the display settings when hooked up to the TV are limited to LCD TV settings; i.e. 1080i. I've also tried setting the mac mini to 800x600 but still get no picture.
    Resetting PRAM etc. didn't help either.
    I'm stuck... any ideas people?

    I've tried connecting the Mac mini to the monitor with a DVI to DVI cable...
    That should work.
    and a DVI to VGA to DVI connection...
    That won't work. Once you go from DVI to VGA from the mini, you need to stay VGA. There is no going back to digital. So try DVI to VGA and then a VGA cable to the Samsung.
    I also tried the Samsung monitor with a little Windows XP running laptop using the VGA to DVI cable and the monitor worked like a charm;...The windows machine's screen set up that worked was 1280x800 at 40Hz.
    I wouldn't call that working like a charm. 1280 x 800 at 40Hz is a completely bizarre resolution for a 23" monitor, or any monitor. I would begin wondering if you got a bad monitor if that's the best it can do.

  • Connecting Mac Mini to Sharp LCD 45" TV

    I just purchased a MINI for Xmas 09'. I have tried to connect it to my 45" tv via: DVI and S-Video connections, both have been un-successful! The only time the Mini shows a display is if I connect to a 17" computer monitor.....
    I purchased the Mivi- Dvi to Video Adapter/ Mini DisplayPort to DVI adapter/
    Mini-DVI to S-Video Adapter and not 1 works with TV. The only time it shows display is when I connect using the Mini-DVI to VGA adapter and connect to my 17" computer monitor.........
    IS there something I'm connecting wrong? Does the MINI even connect to a 45" TV?
    HELLLLLLLLLLLLLLPPPPPPPPPPPPPPPPPPP! Its driving me NUTZ!
    My TV is a SHARP LC-45GD7U. It has "S" Video inputs, DVI-I (29Pin) Inputs.
    It also has HDMI but it is being used via CABLE TV!
    Any info would HELP! THANKS!

    Hi- sorry to hear you are having problems.
    Did you try using the mini-dvi to dvi adaptor that was included for free in your mac mini box? Give that a try, but that being said, the mini display port to DVI adaptor should have worked.
    Just a note- the S-video adaptor will NOT work with the new 2009 minis. At all. You should bring that back to the store and return it.
    Also, can you give us the following details:
    1. Model of your Panasonic set.
    2. Exactly what do you see on your screen when you try to connect? Black screen? Blue screen? Garbled screen? Screen with huge or blurry text? Please be as specific as possible.

  • Connecting intel mini to samsung lcd NOT just as monitor

    I want to use my mini as an entertainment hub, so I want audio too. I have the dvi going to hdmi right now, but of course no audio.
    I am pretty sure from research that component out from dvi wont work. The only reason I ask is because a component in would leave me a place to put the audio in on my tv, keeping the signal together. I have the audio out on my tv going to my stereo (if I want it) so as to not be tied to surround sound all the time.
    So I am thinking my only mini audio option is to put the video into the tv through hdmi and the audio right into the stereo.
    That is unless anyone here has any inside info or secret knowledge they would like to share???
    Thanks in advance.
    John

    The mini outputs video only through the display connector, so regardless of what adaptors you use, you will not get audio.
    However, most TVs which have input for external devices such as computers, have at least one port which offers video with separate audio connectors - and then a setting in the TV to switch that input between accepting audio via the video connector or the separate audio. That's how I have my mini connected to a Toshiba HDTV and it works very well.
    One way or another, you can't keep the video and audio together since the mini doesn't offer that option. Wether you route the audio to the TV or a separate stereo system, I think that's really your only practical choice.

  • Display Issues, Mac Mini and Sony LCD TV

    Hi,
    First my setup:
    Mac Mini(Core2Duo) = DVI2HDMI = Pioneer ASX2 = Sony Bravia 40W2000
    I have two issues, in order of importance:
    Issue #1: When switching off the Pioneer my Mac Mini will suspend. This is not wanted, because I somethimes want it to either work on the iTunes library (hours of work) or download torrents.
    Issue #2: The famous my display is not 1080p anymore but VGA. Has anyone fixed this?
    I haven´t seen any fixes to issue #2 even though it´s super common. I do hope that anyone can sort me out on issue #1

    Both items #1 and #2 can be corrected using the Gefen DVI Detective.

  • Mac mini and lcd tv displays

    I currently have a g3 ibook and a g4 imac. I've been debating on what i should buy as an upgrade. I've been torn between virtually all macs including the powerbook, ibooks, imac, and the mac mini. I'm moving in a couple of months to a temporary residence where space will be limited. I just purchased a very nice philips 37 inch lcd display with vga inputs and hdmi inputs. After much thought this is what i think i'm going to do.
    Sell the G4 imac or give to my parents. Keep the G3 ibook but install the max ram for it (is 512mb the max for this old cpu) and replace the old airport card with a new airport extreme card. Buy an extreme base station. Get a mac mini w/ wireless mouse and keyboard and run it through the philips. Any thoughts?
    If i go this route i keep the ibook for portability and the mac mini gives me a more powerful at home cpu. This would keep costs down and not take up as much space. Anyone have their mini hooked up to their lcd tv?

    Hi Martin,
    I appreciate your thoughts : I have a G3e key Lime Clamshell 466MHz iBook, I put a 256MB SIMM in to take the iBook up to 384mb and it's now OK for Tiger - I used the Apple Video Out cable to a sony CRT TV via SCART and was able to struggle thru Bridget Jones 2 on DVD , but got a headache! Wife was UNHAPPY. suggestion is avoid!!!!!!!!!!!!!!
    (maybe sell your iBook at a premium on an online auction website?)
    I'm pretty sure that Airport Extreme cards - being a different size and shape from the old ones won't allow you to upgrade that way. I did buy an Airport Extreme enabled Mac Mini 1.25GHz 40GB 1GB RAM for driving my Dell 26" LCD TV/Monitor. It is F A N T A S T I C ! The Dell W2600 came with DVI to DVI cable which plugged straight into the Mini's DVI with no adaptors. The Dell was recognised and a profile was loaded by 10.3
    Most important point :-
    I adjusted the Mac Mini screen output resolution to EXACTLY the Dell W2600 Native Resolution of 1280 x 768 (WXGA) (720p HDTV).
    with a mismatched native resolution the modern TV's like your Philips 37" will start to resample and might make artefacts (mine did!)
    The Mini's 32MB video RAM will not drive much higher screen resolutions than 720p anyway!
    Well, after some playing , and loading of helper programs like VLC and MTR , then you'll find that Mac Mini to big LCD is the best ever quality that you've seen your DVD's played. When you download the Apple QT7 H.264 HDTV 720p trailers, you'll have seen the best ever TV quality imaginable!!!!
    for extended use as a desktop PC, the Mac Mini would be better firing into a 17-19" LCD,
    the 26-42" displays are so big that you have to stand 6+ feet away from them at least !!
    I used a BT dongle (I had it lying around) and the Apple BT keybd and mouse work well, in fact, I can type from the other end of the garden - just I can't see what I'm typing!
    I bought my 3rd & last Mac Mini tonight for Euro 399 (£264!!!) as the blowout of the Rev.A 1.25GHz 40GB 256RAM 32 VRAM models. My main Mini really uses its 1GB ramstick when encoding MPG4 via the EyeTV200, but the sub £300 price makes the Mini phenomenal, unbeatable and so versatile!
    I'm sure you'd be happy with the Rev.B with the BTO options until Rev.C comes out!
    what's the native resolution of your Philips LCD? is it video protected path?

  • Mac Mini and LCD TV, changed resolution and now cannot use the screen anymo

    hello,
    I have a Mac Mini and and LCD TV which is connected via HDMI cable. I was playing around with the resolution settings (not very smart in hindsight) and managed to select a resolution that my TV does not support. I do not have another monitor or Macbook. Is there anything I can do to reset the resolution settings? I tried to reset the PRAM, but that didnt seem to solve the problem. I also tried starting in Safe mode but that didnt do the trick either.
    Appreciate your help!

    Arie, it may be possible to get to System Preferences via the keyboard. But you have to be sure the Finder is the foreground application. Is your Mac set to boot straight into your account or does it pause waiting for a password? If it boots straight into a user account, you can try the following procedure:
    \- Restart the Mac (It should be hooked up to the misbehaving display in case that's not clear)
    \- When it is done booting, type Cmd-Tab and then Cmd-Q. Do this several times. (Cmd-tab will step the Mac through all the programs that might be running. Cmd-Q quits them. Doing this several times ensures that only the Finder is running since the Finder can't be quit. This is important for the next step)
    \- Type Shift-Cmd-a (This should open the Applications folder)
    \- Type "sys" quickly (System Preferences within the Applications folder should now be highlighted)
    \- Type Cmd-o (This should open System Preferences)
    \- Type out the word "screen settings" completely (This should cause Displays to be highlighted in the System Preferences main panel)
    \- Hit the Return key (This should open Display Preferences)
    \- Hit the Return key again (This will clear any alert box that may have popped up)
    \- Hit the Tab key once (This will shift the keyboard focus to the resolutions list)
    \- Now start using the up (or down) arrow on the keyboard one press at a time. Each press of the arrow key moves to the next resolution in the list. Wait at least five seconds between arrow key presses for the resolution change to take effect. Hopefully, at some point, the monitor will light up with a stable image and you are back in business.

  • Mac Mini LCD Display - finally got it working but....

    Hello,
    I've posted on here many times about using the mac mini with my LCD display. The display runs at 60hz and a 640 x 480 resolution. For about four weeks, the mac mini would not connect to my screen. I installed display config x and had something of a result. By loading the mac mini up with my old pc monitor plugged in and then switching the vga plug once the mini was loaded, I managed to get a picture!
    Just when I thought my troubles were over, I realised that when the mini went to sleep, if I woke it up I had exactly the same problem. I would have to plus it into my pc monitor, wake it up then switch it with my LCD VGA cable.
    Is there anyway round having to do this every time I want to use my mini?
    Thanks
    Mark

    Check out the manual for "Autoload" -- that's the name of the song file that's automatically loaded each time you start Logic or create a new file. You may want to look at some of the Peachpit books for walking you through creating this file to match your studio and workflow.
    Use Caps Lock to bring up a little keyboard on the screen that you can play with your computer keyboard.
    To change a track's icon, make sure you can see the track's info in the Arrange window. First select the track you want to work with. Pressing P toggles the properties column on the left. You may have to open up one of the areas using the little drop-down triangle thing, but you'll see an icon for the track in the properties area. Click and hold it to bring up a list of icons. You can create your own icons in the png format. Read the manual if you want to add your own images to Logic's standard icons.

  • New Mac Mini, Not so new LCD HDTV Monitor, no mac support

    I have been attempting to set up a Mac Mini with a Maxent LCD 26" HD TV I can't get either the RGB or DVI-D input to accept signal. I have purchased DisplayConfigX and SwitchResX_X. Maybe they could work, but I can't get a signal to stay on long enough to change the settings as listed in other posts. I have tried booting in safe mode as DisplayConfigX instructions suggest. But still only am able to see the screen until gear starts spinning with apple logo, resolution changes spontaneously to one that I suppose is unsupported and I get the unsupported display and a beautiful blank blue screen. I tried manually inputting the resolutions the monitor manual lists, while connected with an lcd pc monitor. But I can't get the Maxent LCD TV monitor to stay on. It appears that if I could get the Mac Mini to send this resolution signal to the Maxent I would be able to delete any unneeded settings and that would be it.
    Perhaps Tom Fussy can help me.I have been at this for over two weeks now. So I have become super frustrated. Of course Maxentusa.com offers no Mac support. But state that if Mac mini is supposed to work with PC that it should work with my Mac Mini. My LCD TV is about 6 months old I could still return it for maybe a Sharp Aquos, if that $300 dollar more TV would work. I am happy with the Maxent otherwise. Keeping it, and having it work with Mac Mini Is my choice. Of course Apple offers no support for the Maxent monitor and directed me here. This is my first discussion group post. School me if I have not followed the rules completely.

    I was able to get the settings for Maxent using Gregory's software to force 640x480. Here are my settings
    DDC block generated by SwitchRes X for display
    MX-26X3
    0 1 2 3 4 5 6 7 8 9 A B C D E F
    0 | 00 FF FF FF FF FF FF 00 34 38 35 08 06 44 00 00
    1 | 0C 0F 01 03 0F 3A 20 78 88 00 0D 00 00 00 00 00
    2 | 00 47 4A BD CE 00 31 59 45 59 61 59 81 80 81 C0
    3 | D1 C0 01 01 01 01 FF 1D 56 EA 50 00 20 30 46 28
    4 | 55 00 40 44 21 00 00 18 8C 0A D0 8A 20 E0 2D 10
    5 | 10 3E 96 00 40 44 21 00 00 18 00 00 00 FD 00 3C
    6 | 55 1F 45 0B 00 0A 20 20 20 20 20 20 00 00 00 FC
    7 | 00 4D 58 2D 32 36 58 33 0A 20 20 20 20 20 00 2D
    Valid DDC block: checksum passed
    EDID Version........1.3
    Manufacturer........MAX
    Product Code........13576 (3508) (0835)
    Serial Number.......17414
    Manufactured........Week 12 of year 2005
    Max H Size..........58 cm
    Max V Size..........32 cm
    Gamma...............2.20
    DPMS Supported Features:
    Standby
    Display type:
    RGB color display
    Input signal & sync:
    Analog input with: 0.700V / 0.300V
    Serration Vsync
    Sync on green
    Separate Sync
    Composite Sync
    Color info:
    Red x = 0.000 Green x = 0.000 Blue x = 0.000 White x = 0.280
    Red y = 0.000 Green y = 0.000 Blue y = 0.000 White y = 0.290
    Established Timings:
    800 x 600 @ 60Hz
    640 x 480 @ 75Hz
    640 x 480 @ 72Hz
    640 x 480 @ 67Hz
    640 x 480 @ 60Hz
    720 x 400 @ 70Hz
    1024 x 768 @ 75Hz
    1024 x 768 @ 70Hz
    1024 x 768 @ 60Hz
    800 x 600 @ 75Hz
    800 x 600 @ 72Hz
    Manufacturer Reserved Timings:
    Standard Timing Identification:
    #0: 640 x 480 @ 85Hz (3159)
    #1: 800 x 600 @ 85Hz (4559)
    #2: 1024 x 768 @ 85Hz (6159)
    #3: -768 x -614 @ 60Hz (FFFF8180)
    #4: -768 x -432 @ 60Hz (FFFF81C0)
    #5: -128 x -72 @ 60Hz (FFFFD1C0)
    Monitor Description blocks:
    Descriptor #0 is Timing definition:
    Mode = 1366 x 768 @ 60Hz
    H. Active...............1366 pixels
    H. Blanking.............234 pixels
    V. Active...............768 lines
    V. Blanking.............32 lines
    HSync Offset............70 pixels
    HSync Pulse Width.......40 pixels
    VSync Offset............5 lines
    VSync Pulse Width.......5 lines
    Pixel Clock.............76.79MHz
    Horizontal freq.........47.99kHz
    Vertical freq...........59.99Hz
    H Image Size............576mm
    V Image Size............324mm
    H Border................0 pixels
    V Border................0 lines
    Non-Interlaced
    Sync: Digital separate with
    * Negative vertical polarity
    * Negative horizontal polarity
    Descriptor #1 is Timing definition:
    Mode = 720 x 480 @ 60Hz
    H. Active...............720 pixels
    H. Blanking.............138 pixels
    V. Active...............480 lines
    V. Blanking.............45 lines
    HSync Offset............16 pixels
    HSync Pulse Width.......62 pixels
    VSync Offset............9 lines
    VSync Pulse Width.......6 lines
    Pixel Clock.............27.00MHz
    Horizontal freq.........31.47kHz
    Vertical freq...........59.94Hz
    H Image Size............576mm
    V Image Size............324mm
    H Border................0 pixels
    V Border................0 lines
    Non-Interlaced
    Sync: Digital separate with
    * Negative vertical polarity
    * Negative horizontal polarity
    Descriptor #2 is Monitor limits:
    Horizontal frequency range.......31-69 kHz
    Vertical frequency range.........60-85 Hz
    Maximum bandwidth unspecified
    Descriptor #3 is Monitor name:
    MX-26X3
    Mac Mini 1.42 g, superdrive, ATI 9200   Mac OS X (10.4.2)  

  • PPC Mini works with Samsung 46" LCD at 1360x768 (sort of)

    Greetings.
    I just purchased a Samsung 46" LCD panel with the intent of using my PPC mini as a home theatre. I connected the mini to the LCD and once I turned off overscan, the display looks very good. The on-screen text is clear and sharp and the colors look great.
    I am having a problem, however, displaying graphics such as DVD movies. It looks that when I play DVDs there is a bit of pixellation and the blacks look washed out.
    The guys at BestBuy told me that this is due to the mini not producing a video frame rate fast enough. Is this true? If so, will the graphics processor in the Intel mini work any better?
    Thanks in advance.
    -Neal
    PPC Mac Mini 1.42Ghz, 1Gig RAM   Mac OS X (10.4)  

    Have you checked the refresh rate! On my screen anything above 60hz can cause problems with the PPC mini.

Maybe you are looking for