Mini power supply works with Video iPod?

Will the power supply that came with my iPod Mini work with the new 80GB Video iPod, which didn't come with a power supply? The adapters are the same but I don't want to fry the video iPod.
Thanks,
Brett

Yes, it will work just fine.

Similar Messages

  • Will this power supply work with my PC?

    Will this power supply work with my PC?  I have a Compaq Presario SR5816F
    http://www.newegg.com/Product/Product.aspx?Item=9SIA4CP1GF8726&cm_re=power_supplies_500w-_-9SIA4CP1G...   
    http://www.amazon.com/Solid-Gear-Series-ATX12V-SDGR-500BX/dp/B00FF7VEJE
    This question was solved.
    View Solution.

    JCGood1984, welcome to the forum.
    The computer should take a standard ATX power supply unit (PSU).  I suggest measuring the existing PSU and compare the measurements to the one in the links.  If the measurements are the same, it should fit.  I don't know anything about the brand, however.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Will This Creative Power Supply Work With The Apple iPod Ser

    I am going on a trip and i am incharge of mp3 players and charging unfortunately i am the only one who has a Zen and every one else has an iPod so.... will this Creative Power Adaptor Work with all/some iPods Thx wbnghiMessage Edited by wbnghi on 06--200709:36 AM

    I've never used an iPod, but don't they charge through their docks?
    I doubt if it would work- very few Mac products are designed to be compatible with PC devices.

  • Will a HP-OW120F13 Power supply work with a DV7T-7000? It is from a DV8T-1100

    I just purchased a DV7T-7000 to replace my old DV8T-1100. I had purchased an extra power supply for when I travel. The power supply is a HP-OW120F13 Replacement spare part # 463953-001. The output on it is 18.5V 120W. The power supply that came with the DV7T-7000 has a output of 19.5V 6.15A.
    Can I use this power supply with the DV7T-7000? The plug to the laptop is the same.

    Hi @dfuerstenau ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Regards,
    George
    I work for HP

  • Will a 65w power supply work with the HP Envy 15t (which comes with a 90w)?

    I have multiple extra 65w power supplies from previous machines.  The pin that plugs in to the machine is different, but there are converters to get the right size pin.  If I get that right pin, is it safe to use a 65w power supply with the HP Envy 15t, which came with a 90w supply?
    One supply (65w) says the output is 19.5v, 3.34a.  Found another extra (90w) says the output is 19.5v, 4.62a.
    The one supplied with the Envy says (90w) 19.5v, 4.62a.  I'm assuming with a pin converter, I can use the second one above?

    Hi,
    For the 65W, It will work, BUT check the tip/connector. The only problems: battery charging could take longer time and for high graphics task it may display an error message. For the 90W, again pin/connector is the main concern.
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • MacOpener - does it work with Video iPod?

    I'm curious if others have this situation. I had a photo iPod which connected to a Mac. I bought MacOpener V6.05, to use my iPod as an external file storage media. All was well.
    I just moved up and to the right, and now only have a video iPod. Things are good until I connect the iPod to my PC. Windows wants to format my iPod drive, and Ephpod wants to build iPod_Control, despite it already existing.
    Is anybody else in this situation? The nearest I can gather is that the lack of firewire in the Video iPod is causing me this problem.

    I realize your suggestion is a viable alternative, but as you can tell by my tagline, I've put my money where my mouth is, and the only computer I use that runs Windows is my work laptop. I travel, so the laptop happens to be the most often used computer. I don't want to reformat my iPod to accomodate Mr. Gates and his empire of eviiiil. I know I have to either work around this issue or forgo usability, and that's what I plan to do.

  • Camera card reader that works with video iPod

    I have tried a San Disk, Lexar, and another card reader, but can't find one that is supported by the camera connector. It works fine with my Nikon D100, but that is USB 1.1 and I am looking for a faster download using a USB 2.0 card reader.
    The on-line manuals state it can be done.
    Any suggestions?

    I have the Sony MSAC-30US card reader and tried to hook it up to my 30 gig 5g ipod with the camera connecter and it said that it did not recognize it. The apple website says that it will support tranfer of pictures directly from camera but I do not have the cable. I ordered the cable for my camera to usb so I can hok them up together

  • Will this power supply work with a k9n6pgm2-v2

    KINGWIN Lazer LZ-750 750W Modular 80 PLUS Certified

    Quote from: Henry on 06-May-10, 12:36:25
    You would be better off getting the Corsair TX650W single rail +12V~52A at newegg. Fresh price today, buy it now as it's the lowest cost it will ever be and where you live you'll get it in 2 or 3 days. It will take about 9-10 weeks to get the rebate, at least that's how long it took for mine.
     $70, compare that to the price (almost 1/2) of the Kingwin and you'll be getting a much better PSU with the same 52A +12V total output.
        $89.99
        ($69.99 after $20.00 Mail-In Rebate Card)
        Free Shipping*
    Edit:
    Just ordered the "Corsair" through eghead, thanx!
        $119.99
        $10.18 Shipping*    That Kingwin at newegg

  • Do both of Apple Store's iPod power adaptors work with the new Touch 2G?

    Hi,
    Many thanks in advance for your attention.
    Looking to to get an Apple USB power adaptor for the iPod Touch 2G.
    In the Apple Store, two are listed, one smaller (and newer) than the other. In the newer one, the prongs are not retractable; in the larger (older) one, they are.
    1. Does anyone know if the larger (and older) power adaptor works with the iPod Touch 2G USB-only interface?
    2. I know that many power adaptors and speakers and car adaptor sets, etc. in the past had a combo Firewire/ USB power interface. That is why the new iPod Touch 2G (or iPhone 3G) does not charge up or power up with these speakers and chargers, etc. (Speakers such as the original Bose Sound Dock).
    3. Is it true that the older (larger) power adaptor works better in all kinds of power situations (different outlets, etc. in different countries); that the older (larger) power adaptor is more travel-versatile? The Apple store perhaps notes a difference, noting that the newer power adaptor works only with USA-style outlets. I see no such note with the older adaptor.
    4. Finally, does anyone know of a USB-only interface that would work with the iPod Touch 2G that is not Apple's (and perhaps not as insanely priced)?

    Many thanks for further clarifying.
    I don't know 100% for sure that the Apple USB cable for the iPod Touch is different than the Apple USB cable for the iPod Touch 2G.
    But:
    I have read (somewhere) that the tiny pin connectors are different. That is why an iPod Touch 1G could be charged by (for example) a Logitech mm50 Speaker set and an iPod Touch 2G cannot.
    An iPod Touch 2G can still connect to the Logitech mm50 Speaker set. It will still play and you will hear music. But it is no longer charging. And I have read of iPod Touch 2Gs getting very hot in these cradles. That can't be good for the poor iPod in the long run.
    So for the Apple USB power adaptors to work, (which both came out before the iPod Touch 2G), they must have some override or blocked pin if they can work with both generations of iPod Touches.

  • Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

    I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer?
    Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760
    Power Supply: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4668507&sku=C13-2511
    Any help is greatly appreciated, thanks.

    It is unlikely that the power supply will fit/work in your HP Pavilion p6213w Desktop Computer. Please consider the Corsiar CX500, CX500M, CX600, and CX600M for your power supply needs. These power supplies are the same physical size as the factory unit and are known to fit and work in most HP full-sized consumer desktop computers.
    There is a chance that the GTX 760 and other current generation video cards may not work in your computer. These newer cards typically require the computer to support the most current UEFI standards and many motherboards don't meet this criteria. Please know the return policy on any video card you purchase, in case it doesn't work. If the GTX 760 doesn't work, consider the GTX 650/660 Ti or equivalent AMD graphics card for your graphics card needs.
    If you have any further questions, please don't hesitate to ask.
    Please click the White KUDOS "Thumbs Up" to show your appreciation
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • HT204291 i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video j

    i have a late 2011 macbook pro and i don't have the airplay icon on my menu. Everything is on the same network and i have a black mini apple Tv. it is either 2nd or 3rd generation. The airplay icon comes up in itunes it doesn't works with video just music. I want to mirror it on my apple tv. Will you please help me?

    That's why, you will need to upgrade to 10.8

  • My iPod Video won't work with videos!

    my ipod video (that i got for christmas) won't work with videos, tv shows, etc. with movies, it says it is loading for about 10 seconds and then it goes back to the menu. same with tv shows, but is completely black screen. help! i don't know what is going on and i really need my ipod to play videos.
      Windows XP  

    Just want to thank you for this brilliant solution. It worked!! I also want you to know that I actually went into the apple store today, and none of the clerks had any idea how to fix this. That excludes the ''genius bar'' which had a five hour wait for appointments! Thank you so much again, merrymusic

  • How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5???

    How do I get this beta IOS 7.0.2 JUNK TO WORK with my iPod touch 5?? I was prefectly happy with my iPod until I got the notice to upgrade itunes to 11.1 and would you like to upgrade your iPod from IOS 6 to IOS 7. And like an idiot I took the little green pill and pushed the button. Now I can't open iTunes, some apps; like the Lindsey Sterling app, Safari and Disney don't work either (not that I care about the Disney one, but, it's part of the base setup, you'd think "IT" would work!) almost anything with video links will not open, iCloud can't find me. All I get is that annoying white screen. I'M NOT HAPPY! I could have bought a Windows machine for a lot less money and have the same problems!?! (I'll bet Mr. Jobs is spinning like a top right now!)  And I have goggled-- found a few fixes: re-install, restore, etc. found one that stated to get iTunes back to go into the iPods setting by double ckicking the home button go to iTunes app and sign out, then sign in again-- those options didn't work. JEM24

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
      Apple Retail Store - Genius Bar

  • My Griffin fm transmitter stoped working with my Ipod Touch.

    My Griffin FM transmitter used to work with my IPod Touch but then it suddenly stopped working. A message pops up saying "This Accessory is Not Supported by IPod Touch" but that doesn't make sense since it worked a few hours before hand. The FM Transmitter still works on my IPod classic though, so I don't understand why it suddenly stopped working on my Ipod Touch. If anyone could help I would really appreciate it.

    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Will PFC power supplies work with SIMULATED sine wave inputs

    Will PFC power supplies work with a SIMULATED sine wave input from a UPS unit?

    Not sure whether you really meant "PPC" and have never heard of a PFC power supply, but if your question is whether a Mac PPC computer will run on a UPS, then the answer is definitely "yes" as my machine has shown twice in the past 12 months and several times in the past on the G5 tower and with a G3 B&W.
    I haven't dragged the old analog scope off the shelf to see what the UPS output really looks like, but I suspect it is no dirtier than the mains power in my neighborhood.

Maybe you are looking for

  • 2012 Airport Express Digital Output

    Does the new 2012 AE pass 24 bit 192Khz audio from the optical digital output? DV

  • Best Practice & BPP for HCM

    Hi, Can anyone please advise me the link for the following: Business Process Procedure document for HCM (Best Practice Scenarios).[Module wise PA,OM,TIME,Payroll,Benefits etc] Config document for HCM (Best Practice Scenarios).[[Module wise PA,OM,TIME

  • Malformed PDF

    Hello All, We generate PDFs from .Net 2.0 executable using Crystal Reports DLLs version 10.5.3700. The documents come out of PDF version 1.2 and are viewable with most any Adobe Readers. However, once opened in Adobe Acrobat 7.0 Professional and atte

  • How to move Documents and Settings and All Libraries To D drive to separate from the OS

    I want to move my Documents and settings Folder to D drive so I can back up the OS separate from Data or at least move Libraries to D drive. I have partitioned my hard drive so that most of the space is on D drive and about 100G is on C drive. I can'

  • Pass paramenters from WDJ iView to Transactional iView

    Hi All I have a scenario where I need to pass the parameters from webdynpro Java iView to Transactional iView. We are implenting LSO and for a Manager role we deployed the MSS BP to access "Employee Search" iView. I created a transactional iView for