Mini resets every morning

every moring i turn on my ipod the apple logo is on the screen and i have not reset it, why????

After a prolonged period without use (ie, overnight) the iPod goes in "deep" sleep to conserve power. To turn it on you press the select button and the Apple logo appears while it starts up. No big deal.

Similar Messages

  • Wireless accesspoint needs to be reset every morning

    We do have 2 airport extreme stations that needs to be reset every morning before users can connect to it.
    We connected the airports to a UPS to see if the problem disappeared but it is still there.
    One of the lights of the airport extreme is off (left)
    by resetting the airport everything is back to normal.
    the airports do have the latest software installed.
    I do know there is a lot of interfearence in the building.
    Could this be the cause or is it something else.

    I think I am having the same problem. Every morning and sometimes in the middle of the day when I leave my ocmputer for a few hours I have to restart my DSL modem and my airport as well as a router i have for my VONAGE phone. Everything is working correctly and connected correctly as well. It works fine but when i leave the computer for some time I lose my internet connection. I disconnected my airport entirely and just plugged the DSL directly into my computer and there was no problem so it is for sure some conflict with my airport extreme. I have the main base station which is the Airport Extreme and a express for my stereo and then another express in the back of the house extending the range.
    It was all working perfectly when i first set it up but now this just started. i have been on the phone with vonage and with SBC for the dsl and the problem is not with their hardware. I tried calling Apple but they wanted $$ to even talk to me over the phone which I thought was pretty lame.
    Can anyone offer suggestions that might help me?
    thanks

  • How to fix a router needs to be reset every morning?

    I just purchased a new WRT54G V8.0. I upgraded to 8.0.0.2 and set up my network. I have 3 wireless devices and one wired device. The wireless devices are the Desktop, the Laptop, and the Wii console. The wired device is the Xbox.
    My problem is this... The network works perfectly all day, no problems what so ever except every morning the router has to be reset and I can't figure out why. Any ideas on how to fix this??
    Wireless is set up for DHCP using WAP-PSK with TKIP auth and MAC adress filtering. Everything connects and work fine throughout the day but every morning it needs to be reset.
    Thanks.
    Message Edited by DaveW on 08-24-2007 08:46 AM

    already tried that. the problem is that the router won't assign an IP. Even on the wireless machines, the router shows up as available. I can even connect to it, the problem is it won't assign an IP. I've reset the preferences for the wireless connection, including the WAP key then attempted to recconect. I still couldn't get an IP.
    This morning I just reset the router without playing with any settings on the computers. After resetting the router I attempted to reconnect. It asked me to enter the WAP key again, so I did and it connects perfectly.
    It's not a huge problem I suppose... but it's really annoying to have to reset the router every morning.

  • Stb resets every morning when tv is turned on

    I know that VZ pushes out updates overnight that cause the stb to restart. On my standard std, the box resets itself, so by the time I turn on the tv in the morning, I'm back to regular programming.
    When this happens on my hd stb, the stb doesn't reset itself until I turn on the tv in the morning. When I turn on the tv, I get the screen showing that the stb is restarting. I have to wait a few minutes until I can begin watching tv.
    Is this happening to anyone else, and why is this happening?

    Already under discussion, see here:
    http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/Software-updating-every-day/td-p/514347

  • Must reset DSLModem manually every morning after shutdown

    hello
    i was able to keep my Network preferences work fine after the latest Security Update (2008-006) Enabled "ask for password.." in Security. but then after the shutdown of my Mac . The morning after (6 -7 hours) i always have to re-start the
    DSLModem manually to set up the connection. I checked Permissions and tried the
    "preferenceplist" change, but still every morning.
    In my "console" i get : " imac-van-luc-fierens SystemStarter278:authentication service (287) did not complete successfully"
    is this keychain connected? keychain EHBO shows no problem
    I also see these messages in Console : about the modem (Ethernet )?
    [0x1a74700] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 2 of hub @ location: 0x18200000)
    Oct 19 19:27:40 imac-van-luc-fierens kernel[0]: USBF: 7827.708 [0x1a74700] The IOUSBFamily has successfully enumerated the device.Oct 19 18:30:01 imac-van-luc-fierens pppd[231]: PPPoE connection established.
    Oct 19 18:30:01 imac-van-luc-fierens pppd[231]: Connect: ppp0 <--> socket[34:16]
    Oct 19 18:30:03 imac-van-luc-fierens pppd[231]: Local IP address changed to 81.245.43.4
    Oct 19 18:30:03 imac-van-luc-fierens launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[234]: exited abnormally: Hangup
    Oct 19 18:30:03 imac-van-luc-fierens pppd[231]: Remote IP address changed to 81.245.43.1
    Oct 19 18:30:03 imac-van-luc-fierens configd[35]: posting notification com.apple.system.config.network_change
    thanks in advance for any help ?

    hi BD, i trashed all old locations and made a new one but no solution.
    Maybe my firmware of the Modem was changed after the last Securityupdateproblems? but Thomson gives no Macsupport for the old versions so
    maybe i should plug in my recent wireless modem i bought, i guess .
    But thanks anyway for your help, i have been a Macuser since the early 90's and never had serious problems and i think these forums are very good.

  • BBM & Email stop working every morning...​.

    Every morning my BBM, Whatsapp, Email and Facebook notifications stop working....
    BBM has a red clock when sending and doesn't receive and the others don't receive or send anything...
    The only fix has been pulling the battery or doing a soft reset with ctrl+alt+delete.
    I have tried reinstalling the apps, reinstalling the OS (don't know how to format and reinstall tho)
    Can anyone give me some solutions? Does it sound like a hardware problem?
    My phone is a brand new out the box Blackberry Curve 8520, its got an etisalat sim card as I live in Dubai if that matters. 

    Cat and Maximo,
    > Let me try to get that straight. Your BM does static NAT for your
    > mailserver (and other boxes), and suddenly UDP and ICMP from these
    > natted servers through the BM still works, but TCP doesn't?
    Yes. That's what it looks like.
    > Can you still do TCP *to* the BM from the natted devices when that
    > happens? As you say your proxy continues to work, it sounds as if TCP in
    > general on the server continues to work, but does it also work from the
    > mailserver?
    Everyone browsing via BM proxy continues with no interuption.
    The mail server can telnet to any other server on the internal LAN but
    nothing past BM. DNS continues working for the mail server too.
    > If really nothing changed, this might be a (succesful) DOS attack of
    > some sort. I wonder if a LAN trace could reveal anything of interest.
    Do you mean port scan the BM server?
    I know that "nothing has changed" is a loaded statement. The only thing
    (that I know of) that has changed relatively recently is the addition of
    the Squid server. It has been running behind the BM server for about 3
    weeks. Recently I added a filter exception allowing the Squid server to
    access higher ports (dyn/tcp).
    But, as I noted before, I think removing ipflt should eliminate any
    doubts there. Is there some way Squid could be corrupting something there?
    The problem was compounded this morning (saturday). I came in today so I
    would have the network essentially to myself. But, to my surprise,
    everything was ok.
    Cat, You're right. This server is no spring chicken. It is an IBM
    Netfinity 3000. Its probably 3 or 4 years old (maybe more). I will think
    about this as a hardware problem but I just wish the thing would die
    altogether and get it over with. :o)
    Thanks,
    Brian

  • IPod Nano Second Generation Freezes Every Morning

    I bought an 8G iPod Nano second generation about a month ago. I love it! I use it with Windows XP. Every morning when I turn it on for the first time, it freezes up when I play a Podcast or Audio book. It also does it with songs but not as much. I push the reset buttons for 5 seconds until the Apple symbol comes up, it resets and then it works fine for the rest of the day.
    It seems like it gets messed up after I connect it the iTunes library on my computer. Does any one else experience this problem?
    Dell   Windows XP  

    I'm not sure you were experiencing the same problem:
    1. Sync iPod.
    2. Let iPod fall asleep for some period of time (a few minutes doesn't cause the problem; beyond 15-20 minutes does).
    3. Awaken iPod and play a podcast -> iPod freezes.
    I and many others have experienced this same problem. Yet, I don't have any life updating smart playlists referring either to podcasts or to playlists not on the iPod.
    Sometimes, playing a song track before playing a podcast will work. If the song plays, subsequent podcasts will, too. However, the song track often freezes, too.
    Also, if you reset the iPod at any point between synching and playing the podcast, the problem is averted.
    Apple has yet to acknowledge this bug despite the multiple threads. I presume that the scenario required to reproduce it is still rare (synching podcasts yet waiting for some time before playing the first one).
    David

  • HP Officejet Pro 8610 (Network)' is offline every morning

    I am running Windows 8. I use IE 11 and Chrome on occasion. Every morning I have trouble "waking up" my printer. I get "HP Officejet Pro 8610 (Network)' is offline". Sometimes turning the printer on and off resets it but today nothing seems to work. I even updated drivers. The rest of my network (excluding printer usage) is working fine. I have not been on a public network so that is not an issue nor has anyone else in our household.  I need to correct this every morning problem. Really, any time the printer goes to sleep I have this issue. I'm unsure if I can stop it from going to sleep or not since I can't even see it from any of our computers. Someone please help. I've been dealing with this about a month. I had previously purchased an Epson printer similar and it now sits in a box in my office because of similiar annoying issues. I previously had HP all-in-ones for about 15 years with no problems. This one is starting to make me wonder about the declining quality of HP printers. Please help as soon as possible. My son has a paper due Tuesday and can't print it. Thanks

    Hello , Welcome to the HP Forums! I understand your Officejet 8610 is offline every morning and it seems like this printer has trouble waking up. I will do my best to assist you! Please follow this entire HP document on What is Sleep Mode? You can try updating the firmware, which should help, since your printer is losing wireless connection when it goes to sleep: 1) Press the right arrow on your printer2) Press Setup (Wrench)3) Press Web Services4) Press Printer update and check for update now Make sure this printer is plugged into a direct wall, not a surge protector. I just want to see if this makes a difference. Another option you have is setting up schedule on and off. This will help with the sleep mode, as you will determine what time you would like this printer to turn and off. Note-If you decided to go down this route, if you receive faxes all the time, schedule on/off might not be a good idea. If you set a time frame when this printer is supposed to turn off, then you will not receive a fax. Also, if ePrint is enabled, this feature will not work. 1) Press the setup menu (Wrench)2) Press power management3) Press Schedule On Yes and set the time frame4) Press Schedule Off Yes and set the time frame I just want to make sure that your printer isn't going offline because of your router, not by the sleep mode. Just in case, I will provide an HP document on Printer Does Not Maintain Wireless Connection. This will allow you to set a static IP address. Please post your results, as I will be looking forward to hearing from you. Have a great night!

  • After updating to iOS 8, every morning I cannot send messages and have to restart my iPhone5 to send or receive any messages. How do I fix this??

    I have a 32gb iPhone5, and every morning without fail, after updating to iOS8, my messages won't send, the message app crashes and won't respond, and then when it finally seems to, the whole thing is blank (as in no messages from anyone show up and the messages screen is just blank). The only way I've found to fix it is to turn off and on my phone and it works for another ~24 hours.
    Is anyone else having this problem??

    Hey Dr_Westopher,
    Thanks for the question. After reviewing your post, it sounds like you are having difficulty with iMessage. I would recommend that you read these articles, they may be able to help you resolve or isolate the issue.
    iOS: Troubleshooting Messages
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    Turn your iOS device off and on (restart) and reset
    Use iTunes to restore your iOS device to factory settings
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Ipod mini dies every time we have a power outage-help!

    my ipod mini dies every time our power goes out.it has been working great with a new(ipodjuice/milliamp)battery, but we've had 2 power outages since, and it shows no signs of life for days and then suddenly next time i pick it up the logo is showing and we're back to normal.we've got a safety switch on our mains circuit board, every electronic gadget is plugged into surge protector power board, and yet this happens every time. the ipod lives on its no-brand charger/speaker-could this be the culprit? & now it's got a new battery it takes forever to fully discharge & come back to life.

    Resetting an AirPort Base Station or AirPort Time Capsule FAQ

  • Error repeating every morning

    Hi!
    We are running a WebLogic Commerce Server 3.5, with MS-SQL Server 7.0 (both
    clustered), along with a IIS_WebLogic Bridge (IIS Acts as the WebServer). We
    notice that every morning the following error appears on the WebLogic
    Console. We have checked for the maintenance plan for the SQL Server -
    weekly backups are scheduled. Apart from that there does not appear to be
    any reason for roll-back.
    Can anyone help?
    <Aug 25, 2001 9:08:36 AM GMT+02:00> <Error> <JTA> <Transaction =
    transaction=(Id Hash=-20308453,Name = [EJB
    SchemaManagerBeanImpl.getDefaultValues()],Xid=22:fbac251331a6fc9c,Status=Rol
    led back. [Reason =
    weblogic.transaction.internal.AppSetRollbackOnlyException],numRepliesOwedMe=
    0,numRepliesOwedOthers=0,seconds since begin=31,seconds
    left=30,activeThread=Thread[ExecuteThread: '8' for queue: 'default',5,Thread
    Group for Queue:
    'default'],ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledbac
    k,assigned=wlcs-server5),SCInfo[wlcs-server5]=(state=rolledback),properties=
    ({weblogic.transaction.name=[EJB SchemaManagerBeanImpl.getDefaultValues()],
    ISOLATION LEVEL=2, weblogic.jdbc=t3://xyz-app-01.xyz.com:7501})) completed
    heuristically:Possible heuristic hazard situation with resource
    'weblogic.jdbc.jts.Connection Error = javax.transaction.xa.XAException: I/O
    exception while talking to the server, java.net.SocketException: Connection
    reset by peer: JVM_recv in socket input stream read>
    <Aug 25, 2001 9:08:36 AM GMT+02:00> <Error> <EJB> <Exception during rollback
    of transaction transaction=(IdHash=-20308453,Name = [EJB
    SchemaManagerBeanImpl.getDefaultValues()],Xid=22:fbac251331a6fc9c,Status=Rol
    led back. [Reason =
    weblogic.transaction.internal.AppSetRollbackOnlyException],numRepliesOwedMe=
    0,numRepliesOwedOthers=0,seconds since begin=31,seconds
    left=30,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,a
    ssigned=wlcs-server5),SCInfo[wlcs-server5]=(state=rolledback),properties=({w
    eblogic.transaction.name=[EJB SchemaManagerBeanImpl.getDefaultValues()],
    ISOLATION LEVEL=2, weblogic.jdbc=t3://xyz-app-01.xyz.com:7501})):
    javax.transaction.SystemException: Heuristic hazard: Possible
    heuristic hazard situation with resource 'weblogic.jdbc.jts.Connection Error
    = javax.transaction.xa.XAException: I/O exception while talking to the
    server, java.net.SocketException: Connection reset by peer: JVM_recv in
    socket input stream read
    at
    weblogic.transaction.internal.ServerTransactionImpl.rollback(ServerTransacti
    onImpl.java:271)
    at
    weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:189)
    at
    com.beasys.commerce.foundation.property.SchemaManagerBeanEOImpl.getDefaultVa
    lues(SchemaManagerBeanEOImpl.java:74)
    at
    com.beasys.commerce.foundation.flow.FlowManager.getPropertySet(FlowManager.j
    ava:293)
    at
    com.beasys.commerce.foundation.flow.FlowManager.getApplication(FlowManager.j
    ava:238)
    at
    com.beasys.commerce.foundation.flow.FlowManager.service(FlowManager.java:506
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :213)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:1265)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :1631)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    regards,
    Prajesh K. Verma
    Eclaton eBDU India Pvt. Ltd.
    Huis van Eclaton
    25, Lavelle Road
    Bangalore 560 001
    Tel: +91 80 2996569
    Email: [email protected]
    http://www.eclaton.com

    Jim,
    Thanks, but it does not appear as if we have any network issues. We also
    checked the database log, but nothing abnormal could be detected.
    regards,
    Prajesh
    Jim Clark <[email protected]> wrote in message
    news:[email protected]...
    'weblogic.jdbc.jts.Connection Error
    = javax.transaction.xa.XAException: I/O exception while talking to the
    server
    Have you experienced network problems? It seems as if you're losing the
    connection between the server and the db.
    "Prajesh K. Verma" <[email protected]> wrote in message
    news:[email protected]...
    Hi!
    We are running a WebLogic Commerce Server 3.5, with MS-SQL Server 7.0(both
    clustered), along with a IIS_WebLogic Bridge (IIS Acts as the
    WebServer).
    We
    notice that every morning the following error appears on the WebLogic
    Console. We have checked for the maintenance plan for the SQL Server -
    weekly backups are scheduled. Apart from that there does not appear to
    be
    any reason for roll-back.
    Can anyone help?
    <Aug 25, 2001 9:08:36 AM GMT+02:00> <Error> <JTA> <Transaction =
    transaction=(Id Hash=-20308453,Name = [EJB
    SchemaManagerBeanImpl.getDefaultValues()],Xid=22:fbac251331a6fc9c,Status=Rol
    led back. [Reason =
    weblogic.transaction.internal.AppSetRollbackOnlyException,numRepliesOwedMe=
    0,numRepliesOwedOthers=0,seconds since begin=31,seconds
    left=30,activeThread=Thread[ExecuteThread: '8' for queue:
    'default',5,Thread> > Group for Queue:> >>'default',ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledbac
    k,assigned=wlcs-server5),SCInfo[wlcs-server5]=(state=rolledback),properties=
    ({weblogic.transaction.name=[EJBSchemaManagerBeanImpl.getDefaultValues()],
    ISOLATION LEVEL=2, weblogic.jdbc=t3://xyz-app-01.xyz.com:7501}))
    completed
    heuristically:Possible heuristic hazard situation with resource
    'weblogic.jdbc.jts.Connection Error = javax.transaction.xa.XAException:I/O
    exception while talking to the server, java.net.SocketException:Connection
    reset by peer: JVM_recv in socket input stream read>
    <Aug 25, 2001 9:08:36 AM GMT+02:00> <Error> <EJB> <Exception duringrollback
    of transaction transaction=(IdHash=-20308453,Name = [EJB
    SchemaManagerBeanImpl.getDefaultValues()],Xid=22:fbac251331a6fc9c,Status=Rol
    led back. [Reason =
    weblogic.transaction.internal.AppSetRollbackOnlyException,numRepliesOwedMe=
    0,numRepliesOwedOthers=0,seconds since begin=31,seconds
    left=30,ServerResourceInfo[weblogic.jdbc.jts.Connection]=(state=rolledback,a
    >>
    >
    ssigned=wlcs-server5),SCInfo[wlcs-server5]=(state=rolledback),properties=({w
    eblogic.transaction.name=[EJB SchemaManagerBeanImpl.getDefaultValues()],
    ISOLATION LEVEL=2, weblogic.jdbc=t3://xyz-app-01.xyz.com:7501})):
    javax.transaction.SystemException: Heuristic hazard: Possible
    heuristic hazard situation with resource 'weblogic.jdbc.jts.ConnectionError
    = javax.transaction.xa.XAException: I/O exception while talking to the
    server, java.net.SocketException: Connection reset by peer: JVM_recv in
    socket input stream read
    at
    weblogic.transaction.internal.ServerTransactionImpl.rollback(ServerTransacti
    onImpl.java:271)
    at
    weblogic.ejb20.internal.BaseEJBObject.postInvoke(BaseEJBObject.java:189)
    at
    com.beasys.commerce.foundation.property.SchemaManagerBeanEOImpl.getDefaultVa
    lues(SchemaManagerBeanEOImpl.java:74)
    at
    com.beasys.commerce.foundation.flow.FlowManager.getPropertySet(FlowManager.j
    ava:293)
    at
    com.beasys.commerce.foundation.flow.FlowManager.getApplication(FlowManager.j
    ava:238)
    at
    com.beasys.commerce.foundation.flow.FlowManager.service(FlowManager.java:506
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at
    weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :213)
    at
    weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:1265)
    at
    weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :1631)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    regards,
    Prajesh K. Verma
    Eclaton eBDU India Pvt. Ltd.
    Huis van Eclaton
    25, Lavelle Road
    Bangalore 560 001
    Tel: +91 80 2996569
    Email: [email protected]
    http://www.eclaton.com

  • Airport Express offline every morning

    I've got an airport express at the office and am having a strange problem with it. Every morning, the wireless network doesn't show up on any of the PC's that use it. It used to happen multiple times a day and I've made a few changes (as described below) that have gotten it down to just happening every morning.
    The original configuration that had to be rebooted regularly was:
    WPA + WPA2 for security
    Automatic channel selection
    DHCP for IP address
    The new configuration that just goes offline overnight is:
    WPA for security
    Channel 10 hard coded
    Hard coded IP address
    There is a second airport express nearby that is hard coded to use channel 1 and has a dynamic address. It uses WEP for security and works fine for long periods.
    Scott

    Just to be clear, The second airport express that is just running WEP isn't mine. I've just talked to the users to see if they have been having any issues.

  • ORA-12514 error every morning

    I get the following error every morning when I try to log on: ORA-12514 TNS:Listner could not resolve SERVICE_NAME given in connect descriptor.
    I checked the services and the tnslistner is started.
    I ran:
    C:\>tnsping lxez
    TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 27-OCT-20
    04 06:27:34
    Copyright (c) 1997 Oracle Corporation. All rights reserved.
    Used parameter files:
    C:\oracle\ora92\network\admin\sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
    (HOST = db-geosvr)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = LXEZ)))
    OK (20 msec)
    I tried:
    C:\>lsnrctl services
    LSNRCTL for 32-bit Windows: Version 9.2.0.1.0 - Production on 27-OCT-2004 06:22:
    25
    Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=db-geosvr)(PORT=1521
    Services Summary...
    Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0
    LOCAL SERVER
    The command completed successfully
    any suggestions?

    Hi
    Problem could be with your backup program hitting on the redo logs.
    Veritas backup run against an Oracle 8.1.7 database gave the same effect you are having. Database running fine
    during the day. Come in next morning and listener service
    Had to reset server and database comes ok and runs for rest of day. Database went down soon after backup started.
    Solutions :-
    set archive log on or
    change backup software or
    Take oracle dir out of backup and run batch file to create a full system backup and include dump on backup
    strategy
    Hope this helps
    Ian

  • Every morning Keyboard wont connect

    Every morning my wireless keyboard doesnt connect to my iMac. It isnt the batteries, and I have done the PRAM and SMC resets. This is beyond frusterating as I can spent over 30 minutes a morning trying to get it to connect. Is there actually any REAL advice on what can fix this beside the resets I see mentioned everywhere, cause they didnt help at ALL.

    I am starting to have the same problem too!  I end up up shutting down the keyboard, then restart my iMac, wait for the iMac to figure out there's no keyboard, wait for the pairing code then I'm good for a day.  Next morning, start all over again.  Kinda odd that my magic trackpad doesn't have this problem.
    Yes, a real solution to this problem would be very helpful.

  • Appears RIM ERROR screen every morning!

    Every morning it appears a screen saying RIM ERROR. I turn of and turn on the iphone and the problem dissapear, but then again appears next morning. I have been with this for 4 consecutive days. Besides, it loses Server conenction during the day and I have to reset it several times to fix it. 

    Never heard of a RIM error.  Do you mean SIM error?  If so...
    Try resetting your network settings.
    Try a new SIM card.

Maybe you are looking for