Mini's chip set supports OpenGL?

Hi All,
It's time to upgrade my Mac (it's only 7 yo, and just keeps ticking). I need to buy two laptops for other family members, so I can't spend much cash on myself. The software package that I'm using is drifting toward opengl for 3D visualization. It's not gaming software, so fps isn't a major factor. Just as long as the opengl library is supported by the Intel graphics chip set.
Also, the kids use iMovie quite a lot. Does that preform well on the mini?
Thanks for your input.
Jeff

The answer is yes. See: http://developer.apple.com/graphicsimaging/opengl/

Similar Messages

  • Support for OpenVMS v7.1-2 on EV6 chip set question...

    Folxs
    I have a new EV6 Alpha available and want to run Forte on it.
    OpenVMS v7.1-2 is a supported OS for Forte v30G2 and 30L2 I think.
    OpenVMS v7.1-2 is a supported OS for the new EV6 Alpha chipset.
    Will Forte v30G2 or 30L2 work on this hardware?
    Is it supported on this platform?
    When will it be supported on the EV6 chip set and what version of Forte do I
    need?
    Thanks,
    Dirk
    PS: Anyone out here using the EV6 and Forte?

    I'm almost sure that Sun's DS (5.x or 6.x) has never been offered for Itanium (for HP-UX or any other OS).
    Someone from Sun may have a better answer.
    Of course, the download list here will give you a good answer too:
    [http://www.sun.com/software/products/directory_srvr_ee/get.jsp]

  • My imad 'lol' mini  say i set up an icloud account when i first got it and its been disabled everytime i try to reset it it prompts me to a different email how can i reset the origanal

    my imad 'lol' mini  say i set up an icloud account when i first got it and its been disabled everytime i try to reset it it prompts me to a different email how can i reset the origanal

    Hi JackEDupdog,
    Welcome to the Support Communities!  The article below will help you troubleshoot the issue you are having with your Apple ID:
    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699
    Cheers,
    - Judy

  • I want to use a mac mini as a server supporting storage. Can I pair my macair to it for when I need to perform updates and maintenance ?

    I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?

    I have a 2010 Mac Mini running Yosemite and Server which I use
    as a headless home server.
    I have is set up to allow screen sharing and can connect to it and
    control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
    that I use as an HTPC.
    You can check this out for all the Yosemite Server capabilities:
    https://help.apple.com/advancedserveradmin/mac/4.0/
    I have iTunes Home Sharing set up on it and have my entire iTunes
    library on it.  I can then use any of my Macs to play Movies or Songs
    from it and only keep locally a select subset of that on my individual
    devices.
    Rather than and update server, I utilize Server's Caching Service.  The caching
    server will duplicate any update download (system or MacApp Store purchases)
    any time a device that is connected to my network down loads one.  The update will
    then be stored locally and all other devices will download the update from it which
    can be faster than from Apple directly.  This has the advantage of only having to download
    once with limited bandwidth internet connections.  There is also an Update Server service
    available, but it is some what more involved in setting up.  However, it will download
    and store all available updates.
    There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
    to iCloud, you can set Server up to sync these items across devices locally.

  • Character set supported by post and util.zip

    hi friends
    in my application i was sending a file(in client) using post method and in server getting using servlets.i what that file to be compressed using util.zip in client and uncompresed in server but i was unsucessful .i think the file before post (compressed one) and retrieving one are not same. is it problem different character set supported by http and zip files? or any thing else?
    plz help me.......

    Just ran into this myself yester day.
    There is a Metalink Note on it.
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=190281.1
    Problem Description
    You are using OC4J and trying to connect to a database using JDBC OCI and
    are getting:
    "java.sql.SQLException: Character Set Not Supported !!: DBConversion"
    Solution Description
    Replace the <OC4J_HOME>\jdbc\lib\classes12dms.jar with
    <ORACLE_HOME>\jdbc\lib\classes12.jar and rename it with classes12dms.jar.
    Explanation
    It seems there is a mismatch of classes12.zip supplied with OC4J 9.0.2
    and the Oracle9i client libraries ocijdbc8.dll or ocijdbc8.so.
    OC4J 9.0.2 does not use jdbc\lib\classes12.jar instead it uses
    jdbc\lib\classes12dms.jar. So, in order to use the 9.0.1 client with OC4J, you
    will need to make a copy of classes12.jar and rename it to classes12dms.jar
    References
    [NOTE:108876.1] Creating Connection gives "No ocijdbc8 in java.library.path"
    [NOTE:174808.1] JDev9i and OCI Connections
    I copied and renamed the jar (classes12.jar) as they stated.
    Note: It should be in the directory you set in the JDev.conf, mine is
    AddNativeCodePath D:\OraNT\9iDS\bin
    Didn't try the other reply's suggestion of setting an environment variable.

  • I have just bout a brand new ipad mini and commenced setting it up. I had to leave it for a while and switched it off. When I came back to switch it on it asked for a pass code and I haven't set one up as far as I know. Anyone know whats going on!

    I have just bought a brand new Ipad mini and started setting it up. I had updated to os7.4 and after it finshed installing I had to leave it before answering all the set up questions. When I switched it back on it asked me for a pass code which as far as I'm concerned, hasn't been set up yet. Anyone know whats going on!

    Hi robertbpage,
    Thanks for using Apple Support Communities.  If the iPad mini is asking for a password that you do not know, this article has steps you can take:
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    - Ari

  • Hi i have just got a ipad mini and have set the password and cant remember it how can i access my ipad

    hi i have just got a ipad mini and have set the password and cant remember it how can i access my ipad

    There are instructions on this page for how to reset your iPad : http://support.apple.com/kb/HT1212

  • Chip set in A660-BT3G25x?? Is it an HM55 or HM65 Intel Express??

    I am thinking about buying a customized version of the above computer?? How about any of you that may have bought the above machine since Toshiba started putting the "Fixed" Intel HM65 Express Chip Set into their machines with the "Second Generation" Intel Procerrors? Toshiba shows, on their PDF Spec Sheet, that their customizable machines, as above(A660), have the first generation HM55 chip sets not the up-to-date "Fixed" HM65, with the second generation generation processors, in these machines. When checking with Toshiba on this, I get yes's and no's from both Toshiba direct and Toshiba Support. Seems no one knows for sure?? I hope they are not tring to unload excess stocks of their HM55 sets in the hope no one will see that they are not getting the best machine that they should!! Any comments that help to resolve this question will be appreciated as Toshiba Direct and support seem to be at odds about the situation??

       Well, despite my pontificating above, it would seem wolfkiel is has a point about the A660-BT3G25X Specifications sheet. But, notice this spec sheet shows the model number as A660-BT3G25, NOT A660-BT3G25x
    There was some concern raised here about the Sandy Bridge chipset at the end of January. All these models were mentioned for recall-refund in this Support Bulletin:
    Satellite A665-3DV10
    PSAW9U-001001
    Satellite A665-3DV11
    PSAW9U-01C002
    Satellite A665-3DV12
    PSAW9U-019002
     Satellite A665-S5183   PSAW9U-01M002
    However, in the above linked bulletin, notice that:
    "A number of Model Part Numbers, originally affected by the Intel issue, are being re-released with the new Chipset. These units will have Model Names, printed on the computer's box and serial number labels, which have been modified with a lower case x as displayed in the picture below. These units are NOT affected by the previously reported Intel issue."
    When you now check all of the above models' specification sheets with the 'x' on the end of the model name/number, they all have the HM65 chipset. While the beginning Part Number PSAW9U has remained, 2 have had the ending Part Number for these 'x' models has changed, 1 ending the same, 1 missing. Examples:
    Model Name: A665-3DV10x Part Number: PSAW9U-001001
    Model Name: A665-3DV11x - Specs sheet missing
    Model Name: A665-3DV12x Part Number: PSAW9U-01903T
    Model Name: A665-S5183x Part Number: PSAW9U-01M03T
    Given all the above, I suspect that the original spec sheet meant for the A660-BT3G25 slipped through by accident, instead of the A660-BT3G25x spec sheet.
    So, my sincere apologies to wolfkiel! 
    Mike

  • I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

    I have mid 2009 Mac Book Pro running 10.9.1. The hdmi mini port no longer supports sound on the Sony TV. This is apparently a change. It no longer shows as an option in system preferences/sound.Any ideas?

    The 2009's didn't support sound on HDMI. That came in 2010. Are you sure it ever worked?

  • Officejet Pro 8600 all in one installation on dest top with AMD64 chip set and Window 7

    Can't install an HP Pro 8600 all in one with full features on a Desktop with windows 7 64 bit OS, PC has an AMD chip set, connection is wireless.
    This printer is replacing an HP Pro 8500 all in one that failed. HP's only solution was to upgrade to the 8600. All 8500 software was removed before attempting to install the 8600.
    The installation recognizes the printer & IP address. In the last step of the setup the network connection is not recognized. When I try to add a printer in Windows, the Microsoft drivers are installed and the printer works fine, but no scan or fax.
    I had success installing this wireless setup on 2 desktops (windows 7 & XP OS) and a laptop running VISTA. All of these have Intel CPU's. The installation completed fine.
    The HP Installation CD has an AMD64 folder (with "hpinkins5912"), but no instruction on setup or updating AMD drivers.

    Hey @mech3320 ,
    Thank you for taking the time out of your day to ask that question on the HP Forums today!
    I understand that you are having some trouble with the driver download on your AMD chipset but not your Intel one.
    I recommend that you try the web download of the drivers after you uninstall the ones that you tried form the CD.
    Driver Download Page
    Let me know if the web drivers work better for you or not.
    I worked for HP.

  • How to install windows xp on mac mini without cd rom support

    How to install windows xp on mac mini without cd rom support. I have installed Bootcamp on my mac mini. And i was using windows xp on my mac mini before xp crashed due to a system file missing or corrupt.

    usb optical drive

  • Can't register my iPad mini Retina with Apple Support

    When I try to register my iPad mini with the Apple Support in my profile page, it says that my serial number is already registered to another Apple ID, and to check to see if I've got any other IDs. I ordered this directly from Apple when it was released, and it had never been opened. I contacted Apple, and their records show that it's registered to me. But I'd like to register it online so I can submit questions and any maintenance requests, which I can't do because I can't register it. Has anyone else had this problem?

    I tried. They said their records showed that the iPad was registered to my Apple ID. They had no explanation why my serial number couldn't be registered. Felt I was getting the run around so I thought I'd toss it out to the community.

  • [Athlon64] Anybody has any experience with ATI Radeon XPRESS 200P chip sets?

    Anybody has any experience with ATI Radeon XPRESS 200P chip sets?
    I am looking to purchase a computer for my wife who does not require major computing power. And looks like ATI is a cheaper option.  Any recommendations?
    Any info is greatly appreciated.

    Quote from: dannol48 on 23-June-05, 02:25:47
    The RS480M2-IL haa a CnQ option in Bios. 
    Installing the AMD driver and setting the Power Scheme to "Minimal Power Management" in Power Options is required to enable CnQ in XP.
    Danno
    Hello Danno ^^¿''
    Well, I just bought the RS480M2-IL with a Venice 3000+ and 1 GB DDR, I've tested the Video onboard(all the newest drivers installed)  with the 3DMARK  2001, and I just can get 3052 ptos...so .. please tell if you has made some time ...and how's your score?
    Oh man please tell me...maybe I made a bad choise but I was specting something better from this Mobo!!!...
    thanks and enjoy the time 
    PD: Another thing: my modo comes with the bios ver. 3.4 ...and have "The Normals falis" son I don't really know wich ver, could be better....cya..

  • Graphic Chip Set

    Can the Graphic Chip Set, in my MBP, be changed? If so will my MBP recognize and utilize a bigger and better one?? How big of a job is it to change, if it can be done??? The reason I am asking these questions is because I have already purchased a Pioneer 203 internal BD burner, that came with the necessary software, and installed it in a quad interface enclosure. I then connected it to my MBP, with a FW800 connection. Cyber Link tells me my graphic card is the minimum graphic card to be had. Which means I can play BD movies, and my MBP does, but for the higher levels of BD I need a better Graphic card. By the way, this is on my Vista side of Boot Camp.

    Unfortunately, I don't think there is a way to do this. According to MacTracker, your Mac only shipped with the 2.33 GHz processor. Generally the chip set is not considered to be replaceable--the logic board would have to be swapped out. Some other models are offered with 2 different processor speeds, and if that were the case, it might be possible to swap out logic boards and install the one with the faster processor. And as far as I know, the logic boards from a later build would not be able to be installed in the Mac that you have.
    If you truly need a bigger and better graphics chip, you probably need to invest in a newer MBP.
    Good luck!

  • Character Set Support

    Hi,
    I need to open my application for international users and support multi lingual languages, mostly confined to Europe.
    I am using Forms 4.5 with Oracle 8.1.6 on HP Unix.
    My questions are
    Is UTF8 character set supported by Forms 4.5? I know forms 6i can.
    Has anyone tried to achieve it? Someone can share his experience here?
    Thanks in advance
    Sanjay
    null

    Any one...

Maybe you are looking for