Mini's Pinwheel no response

My iPod mini's pinwheel no longer responds to any touch. I've tried to reset the mini starting from the factory default but this has no affect. My warranty period has expired so I would like to know how much it would cost to fix. Thanks

Hi Spiderman,
Welcome to Apple Discussions
You should look at iPod - Service FAQ.
I hope that helps,
JonAre You New to Apple Discussions? Do You Want More?
kad: How to Properly Use Apple Discussions
G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz iBook, Macintosh 128K, eMate... Mac OS X (10.4.5) Airport EX, Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Similar Messages

IPad mini touchscreen not as responsive...

Hi,
I have purchased my iPad mini last Friday and been using it since. I noticed when I am watching video and trying to adjust the volume on the screen, it's not as responsive as I experienced on my iphone. I have to try so many times for sensing my finger to adjust the volume.
The volume bar normally places near the edge of the screen. I am not sure if it is the reason.
Any suggestion will be appreciated.

Have you tried changing various items in Settings > Wallpaper & Brightness?
Once you tried that and are convinced the settings are not the issue, then you should take it to the Apple Store for an assessment.

IPad Mini touchscreen partly not responsive

The left part of my iPad Mini is not reacting on touch.
I need to always turn the iPad to use the part of the interface that reside on that part.
And yes: I performed reset, even restored the iPad to factory settings.
On setting it up as a new device I were even not able to type an "a" (the a is on the left side of the keyboard in upright position).
An so I even needed to restore from iTunes Backup.
That should illustrade my struggles enough, I presume :-)
Besides that:
The iPad sometime reacts weirdly and opens and closes apps that were not open.
If I type a character, it inserts 10 of them...
Resetting or restarting only fixes the weird reactions for a moment...
Please help me out if you can but don't offer stuff like "see the Genious Bar" (which I'm going to do soon) and performing reset and restart (which I did already)..
Thank you guys for your time.
Kind regards,
Jo.

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

My macbook pro is frozen on desktop mouse no response i have forced shutdown and restarted 3 times no change. What to do ?

Hi guys and gals
Have not used my macbook pro for couple of months and now she is frozen - opens to wallpaper on desktop of snow leopard but absolutely no response with mouse or track pad . Screen goes blank after 5 mins then the only response is from the power button . When pressed the screen lights up with window asking if i want to shut down or.....enter has no response . Only option is to force shutdown and restart yet this does not resolve issue.....back to square one!!!!
Help???

If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select
View ▹ Show Log List from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Mac mini: Can I downgrade to OS X 10.8.5?

Simple question: Since the "current" Mac mini is the Late 2012 model, which originally shipped with OS X 10.8.x, is it possible to purchase a new unit today, wipe the drive, and install OS X 10.8.5? I have a 10.8.x installer.
Reason for this question: I have read about many problems with Server 3.x on OS X 10.9.x and Windows clients. I need to use a Mac mini to support some Windows 7 clients and know 10.8.5 with Server is stable.
Is this viable? Any other thoughts?
Thank you,
Pete

The original poster did not say that his 2012 Mini originally came with ML. All he said was the 2012 Mini originally shipped with ML.
There is a difference with "his" Mini and "2102 model".Mini
dcimino wrote:
The response was to:
"Simple question: Since the "current" Mac mini is the Late 2012 model, which originally shipped with OS X 10.8.x, is it possible to purchase a new unit today, wipe the drive, and install OS X 10.8.5? I have a 10.8.x installer."
He clearly states that his late 2012 came with 10.8.x so lets not create confusion.

How to get the number and response time of HTTP request through Weblogic?

hi,
does anybody know how to get the HTTP request information through Weblogic server, such as the number of HTTP request in 1 min and the average response time of request in 5 mins ?
Or is there anyway i can do it through monitoring and get these data then? If so, please help tell me.
Thanks in advance
BTW, we don't have the 3rd-party monitoring tool here.

Hi,
tables: usr02, usr41.
data: OPCODE_MODE_COUNT(1) TYPE X VALUE 3,
      modes like sy-index,
      u_MODES LIKE MODES.
select * from usr02.
select * from usr41 where BNAME = usr02-bname.
    CALL 'ThUsrInfo' ID 'OPCODE' FIELD OPCODE_MODE_COUNT
      ID 'TID' FIELD usr41-TERMID
      ID 'MODES' FIELD MODES.
    IF SY-SUBRC = 0.
      u_MODES = u_MODES + MODES.
    ENDIF.
endselect.
if sy-subrc = 0.
    write:/ usr02-bname, u_MODES.
endif.
clear u_modes.
endselect.

Is the Mac mini 2011 support the white Apple remote?

Can't find similar question. Anyone know if the Mac mini 2011 support the white (1st gen) Apple Remote? I have one but my Mac mini server seem no response at all.

Problem solved. System disable apple remote by default.

Why is my mini mac overheating

I was
downloading a large file a about 6 to 8 hours
Mini mac started to freeze overheat an won't come on

I have had the same issue with my mini. Purchased in 2010 it performed for one year and then hard drive issues. I replaced the internal hard drives and went to a external hard drive for file serving and that worked for one more year and the problems returned. The mini would be none responsive and the fan running loud enough to hear it accross the room and yet the mini was still hot to touch. Its now 2013 and I am back to square one with a non funtional mini.
The mini was used for Media Entertainment for me and our 4 grand children. The grand children only here on the weekends and used their ATV's to access movies,pictures,and music.Downside to this setup is the ATV's still today require a computer running itunes to access media, by todays standards I believe this to be primative.I am looking at new media player hardware and a NAS adapter with ESATA for file storage as a solution to running a computer media server. I am now frustrated with Apple's hardware and their continual denial of any issues with their products. A man once said " its one thing to error, but decietful to not address error " I feel safe to assume this problem will also plaque the 2013 mini's

Intel Mac Mini vs. PowerMac G4 Dual?

Does anyone have any experience of how the new Intel Mac Mini fairs against a dual processor G4 PowerMac? I'm thinking of buying a Mac Mini to replace my 1.25Ghz G4.
I'm not fussed about the non-universal apps as the primary use will be for iLife and the "standard" Mac apps.
Any feedback would be welcome.
Thanks people.

I tested both single and dual core Intel minis a couple of weeks ago, and they both outperformed my Dual 867, and the dual core model got very close to the performance of my Rev A G5 dual 2.0 running iMovie 6.
In terms of performance in native software, I'd expect both Intel minis to outperform a dual 1.25 G4 on almost all tasks - the only exception might be between the G4 and single core mini in tasks which are highly processor intensive, where the dual G4s might still win out, or on disc-intensive work (meaning opening or saving something like very large photoshop files rather than streaming DV in iMovie) where the mini's drive speed would still represent a bit of a possible bottleneck.
I was quite impressed by the Intel units, particularly in iMovie where my G4 minis tend to be a bit laggy as projects grow, but even the single core mini was much more responsive.

Recently purchased a scanner which I connect my iPad to. everything scanned goes into iPhoto. I purchased FileApp Pro to place scanned items into files. I still can't move the scanned items to a file. Help!

Scanning items into iPad. Scanned items go directly to iPhoto. Purchased FileApp Pro to create file folders on iPad. Still cannot move items from iPhoto to file folder. Help?

Is this a NAS type of setup (of which I know very little)? Mine is not a response based upon strong technical knowledge but iTunes seems to have problems with those. Just about everybody has issues with iTunes but you say it is not fit for the purpose. What is that? I bet for 99% of people it does. Not everybody has 8TB collections they are trying to use with a RAID structured external server. iTunes is really a mass consumer piece of software. Yes, many people have expanded beyond internal drives, but NAS arrangements seem to add levels of complexity beyond a direct external drive that is Mac formatted and at most served by an Apple brand wireless router which I suspect is probably how everything is tested. Anything more is fortuitous in terms of support. Except that you say the library files are on the external drive too it sounds to me like the server is asleep when you say it cannot find files and then suddenly can when you go to find one.

Issues to Configure SAML ,I tried alot but its not working ,Below Given instruction how to configure SAML

SAML Overview
Security Assertion Markup Language (SAML) is an XML-based standard for exchanging authentication and
authorization data between security domains, that is, between an identity provider (a producer of assertions)
and a service provider (a consumer of assertions). SAML is a product of the OASIS Security Services
Technical Committee.
SAML is relevant to those customers who already have a SAML implementation in use with other systems in
their organization. Therefore, it is recommended you engage your technology team that has a working
knowledge of SAML and provide this document to them for their review.
Key Roles
• Identity Provider (IDP): The system in authority that provides the user information
• Service Provider (SP): The system that trusts the asserting party’s information, and uses the data to
provide an application to the user.
• Subject: The user and their identity that is involved in the transaction.
Note! In our context, Learning Maestro is the SP, the IDP is customer-specific, and the Subject is the user
who is logged in.
Copyright © 2013 SumTotal Systems, LLC. All rights reserved. Duplication prohibited. 2
Typical SAML Components
Source: http://www.oasis-open.org/committees/download.php/27819/sstc-saml-tech-overview-2.0-cd-02.pdf
Copyright © 2013 SumTotal Systems, LLC. All rights reserved. Duplication prohibited. 3
Implementing SAML 2.0
• SumTotal LMS supports only SAML 2.0 Standards.
• We support only IDP-initiated SAML authentication.
• The SAML Response should be signed and base64 Encoded.
• UserName should be passed in NameID element under Assertion\Subject Keys.
• We use the timestamp provided in IssueInstant attribute of SAML Assertion to find the valid period
(+/- 5 min ) for the SAML Response.
• Currently, we do not support signed or encrypted assertions.
• Deep linked URLs can be passed through an additional URL parameter of “OriginalURL.”
IDP Initiated Web SSO
Source: http://www.ijcsi.org/papers/2-41-48.pdf
4
When Learning Maestro is Accessed from a Portal
1. The user logs into the customer portal.
2. The user clicks on a link to the LMS from the customer’s portal.
3. The link points to an IDP page.
4. The IDP pages posts an HTTP Request to Learning Maestro
5. The request is an < ... > message.
Typical Structure of a SAML Response
• Below is the typical SAML Response received by LMS from IDP
• Value of SAMLResponse parameter should be base64 Encoded.
Please double-click to open the below XML file to view how the response looks after decoding:
ExampleSuccessfulAssertion.xml
5
Configuring SAML 2.0
SumTotal Maestro supports SAML 2.0 for the “Identity Provider Initialized SSO” protocol.
To configure your Maestro domain to accept SAML 2.0 Assertions, the following steps must be taken:
1. Confirm that Usernames are in sync
2. Provide an X.509 Certificate to SumTotal Systems (SHA1 Hashed)
SumTotal Systems will configure your environment with the X.509 cert you provide.
3. Point your call to the following URL:
https://gm1.geolearning.com/geonext/<your_domain>/saml.geo
After authenticating to your Identity Provider, the provider will pass a user into Maestro IF:
• The user has a username matching an existing Maestro username
• The x509 certificates match on both sides
If authentication fails, the user will be presented with a failure page.
Assertions
An optional assertion is available to specify the URL a user will be sent if there is an authentication error.
ErrorRedirectURL Assertion
• If ‘ErrorRedirectURL’ is not specified and an authentication error or other security exception
occurs it will redirect the user to the default secerror.geo page as it does today
• If a value (URL) is specified for ‘ErrorRedirectURL’ and there is an authentication error the user
will be redirected to the URL specified
Sample
6
Additional Information
For additional information on SAML, please refer to the following sources:
Wikipedia: Security Assertion Markup Language
OASIS Executive Summary
IJCSI Intermediate Concept
OASIS Technical Overview
FAQs
Question Answer
What .NET library are we using? SumTotal uses “Componentspace” net SAML 2.0 library
Can users still log in via the login page? Yes. The SAML target page is different than the login page.
Can we deep link into the LMS through
the SAML 2.0 authentication workflow?
Can I get rid of the Logout button?
What is the Session timeout setting? Session Hard Life and Idle Life settings can be configured in
What is the unique ID for SAML? The “username” field.
Yes. “Deep Link Target” (target or original URL parameter) is
accepted. If none is provided, then it will default to the default
landing page as configured in Maestro.
Yes, When using SAML, the logout button still exists
intentionally in the navigation but can be disabled in the
“configure Navigation” options.
the security section of the administration interface of Maestro.
What is the failure page if
Authentication fails?
If the authentication fails, by default an intentionally simple error
is presented to the user stating “Authentication Failure”.
For security purposes, no further information regarding the
specifics of the failure are defined to the user.
An optional ErrorRedirectURL assertion can be used.
What URL do we point to? https://gm1.geolearning.com/geonext/<your_domain>/saml.geo

Hello,
Thanks for posting your question to here. However, this forum is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. For issues regarding configuring SAML, this is beyond
the scope of our support.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

ITunes can't find the music - long post

Here’s the situation; apologies for length, I want to get all the details down.
The music collection:
8Tb (and growing) in lossless format, on an Ethernet network, accessed via the Mac Mini running OS 10.9.2 that’s my entertainment centre. The music is stored on a D-Link server in a RAID 1 setup. I’ve disabled the iTunes import features keep the iTunes media folder organised and copy files to iTunes media folder when adding to library because with a very large library of opera and other classical music with multiple artists, this produces chaos. I’ve tried editing the file info before import, but the organisational results are still awful. I put the music files into folders named by composer, then subfolders for each work named by composer and performer(s), then add them to the library. If I didn’t do this I’d have (and have had), e.g. Turandot sorted by artist into eight separate albums. I’m sure many of you know the problem already, I just want to make sure everything’s clear.
There’s also a separate, lower bit rate, collection for my iPod.
The music library (.itl) files:
There are two, the complete library file for home listening, and the separate library file for iPod music. I’ve tried keeping the library files on my hard drive so they’re included in Time Machine backups; and keeping them on the server with the music collection. The same problem happens whichever way I do this.
I option+click when loading iTunes to select the library file I want to use, to make iTunes point to the correct media file location. I make sure I’m connected to the server before I do this(!)
The problems:
Every time I select a playlist either the playlist doesn’t list any tracks but shows me how many songs there are in the playlist; or iTunes tells me it can’t find the first file in the list - do I want to locate it manually? I do locate it and then I have to tell iTunes to find the other missing files; it finds the files in that playlist but then takes several minutes to tell me that it can’t find all the other ‘missing’ files in that big library. Meanwhile, I’m not able to listen to any music.
It seems to me that iTunes only works properly if the music is actually on the local hard drive but how many of us have that little music? I buy DVDs and rip the music myself, at max bit rate, I don’t buy downloads.
One problem seems to be that the Mac OS doesn’t index external drives automatically, is this true? This morning I’ve forced Spotlight to index the server drives using the terminal mdutil command but it’s made no difference, the problems are still there. What is Spotlight supposed to do? I’ve followed the instructions for using it and researched using it on the Web, but it’s never been able to find files I know are there, yet EasyFind has no trouble locating anything on the local drive, the music server or other external drives. I suspect that there are more fundamental bugs in the OS affecting this, because sometimes I’ve looked at a folder count in the Finder and know that the displayed number of files is wrong, it’s less than the number of files I know are there. Get Info will give me different numbers for the same folder at different times when I haven’t added or deleted any files in it.
I’m looking at Music Collector as a replacement for iTunes, but if iTunes’ problems are based in the OS, there doesn’t seem any point in switching. The price is reasonable, I’m happy to pay for it if it will work properly on the Mac OS. If I’d had to pay for iTunes I’d be getting my money back as it obviously isn’t fit for purpose. I’m in the EU, we have proper consumer protection laws here.
The Mini is 17 months old, still under a 3-year high ed warranty and has just come back from servicing at an Apple retailer, which fixed a software problem that prevented the OS from loading, so it should be problem-free... right?
Do you think reimporting the whole music collection again, using the two iTunes settings I’ve disabled, would make iTunes retain its links? I have the server space. It’s a nightmare scenario, imagine that Turandot again, 55 tracks split into eight albums, by soloists, conductor, and orchestra, and iTunes’ and/or Mac OS search facilities not working properly. How would I find all the tracks and create playlists for everything? There’s a lot of CDs that would give me the same problems. I have a 50-CD set of the Berlin Philharmonic covering 100 years of recordings, trying to organise this into coherent playlists multiplies the Turandot problem many times over. It goes on. That’s why I switched to organising the music myself in the first place, I was getting migraines trying to find everything to create playlists and not listening to any music.
I’ve been running various Linux distros on a dedicated box for several months, but again, music is the obstacle to switching. I haven’t found products that do what Audio Hijack Pro (especially) and Fission do, on Linux. Everything else on that platform works for me.
Sorry about the length, but music is the most important thing my Macs do. I’m disabled and music matters a lot. Any tips, links or advice generally would be much appreciated. I don’t mind spending a reasonable amount of money to get something that’s reliable, because iTunes doesn’t seem to be it, although I wish it was.
TIA.

Is this a NAS type of setup (of which I know very little)? Mine is not a response based upon strong technical knowledge but iTunes seems to have problems with those. Just about everybody has issues with iTunes but you say it is not fit for the purpose. What is that? I bet for 99% of people it does. Not everybody has 8TB collections they are trying to use with a RAID structured external server. iTunes is really a mass consumer piece of software. Yes, many people have expanded beyond internal drives, but NAS arrangements seem to add levels of complexity beyond a direct external drive that is Mac formatted and at most served by an Apple brand wireless router which I suspect is probably how everything is tested. Anything more is fortuitous in terms of support. Except that you say the library files are on the external drive too it sounds to me like the server is asleep when you say it cannot find files and then suddenly can when you go to find one.

Block with more than one table type agurment - Update Procedure for Block

Hi,
I have one form with 3 Block. First Block is single row block, and other 2 are details block . The details balocks are based on the Procedure datasource, because of the complex query conditions. Now my requirement is When Inserting / Updating the Master Block (Single Row Block), I need to get the values in the two details block , because I need to update some other tables also based on these values. I created a procedure with two Table Type parameters (for each details block) , but when I using this procedure as the Update Procedure Name in the block, I am getting the error Only One table type arguement is allowed. Is there any other method to implement this.
Thanks in advance.

Rizly,
A quick summary to make sure I understand your requirements. You have a single row base table master block with two detail blocks that are based on Procedures. When you update the single row base table master block, you need all of the data in the two procedure based detail blocks as there are updates that you have to perform to other tables that use this data. You have created a stored procedure that take two PL/SQL tables as parameters, but you are getting the error that only 1 table parameter is allowed.
I need to ask you a few questions first. What is your Forms version? The stored procedure you created; are you using this procedure in the "On-Insert, On-Update, On-Delete" triggers or do you call the procedure in one of the Base Table block ("Key-Commit, When-Button-Pressed" or other trigger)? When you modify or add a new Master block record are you adding values to the detail blocks or using values from the previous Master block record?
If you are using your procedure in the On-Insert, On-Update or On-Delete trigger(s), then based on your description, the error you are receiving is correct. The "On-..." triggers are constrained in that their procedures expect only a single PL/SQL table, Table of Records or Ref Cursor as a parameter. This is a Forms constraint - not a PL/SQL constraint as Forms is expecting you to only perform actions on the block where the "On-..." Trigger is located.
Perhaps you should consider creating a database Package that has two package specification constructs (Ref Cursor, Table of Records, etc) you can populate from Forms and then simply call the package procedure that will use the Ref Cursors to perform the needed update or inserts.
Hope this helps.
Craig...
If mine or someone elses response was helpful, please mark it accordingly

Using BootCamp on 2010 MacMini Server

Before the putdown for misusing a Server, please listen. I bought the server for it's hardware, not to use as a server.
I have posted the following on another thread I started in "Using Your Mac Mini" but get no response. I am hoping those better acquainted with the Server might know the answers I am after.
To Quote my own thread: "I would like to get input from people having ideas on using BootCamp Assistant on the 2010 Mini Server to install Windows-XP to the unused second harddisk. I copied BootCamp Assistant from my 2009 MacMini Client computer to the 2010 Server and it seems to be a free standing application. It did format disk 2 for Windows, but apparently Fat16 because the Windows installer wants to reformat to NTFS. Windows installer shows two disk0 to choose from, both showing as Master Boot Record. It doesn't show the 1st disk which has the Server Operating System installed on it. I don't understand why it is showing two disk0 when there is just one disk formatted for Windows showing in Disk Utility.
One of the shown disk0 is just one 500gig partition, and the other is showing a 200mb first partition followed by a second 500gig partition. both show as Master Boot Record.
Also when Bootcamp Assistant formated the 2nd harddisk did it install the necessary files into root to boot the Windows formatted harddisk?
Anybody have any ideas on that? "
Thanks.

You're centrally looking for Microsoft Windows help, and the Apple Server Forums probably aren't the best spot for that knowledge. Consider posting this in a Microsoft forum, and looking for help booting Windows XP on an EFI box.
To get a Boot Camp configuration available on your Mac Mini Server hardware, reformat the disk and load Mac OS X client on the box, or use a virtual machine to guest the Windows platform under Mac OS X or Mac OS X Server. That'll get you closer to where you want to go today.
It's been a while since I have last checked this (and I moved off of Windows some years ago), but Windows XP didn't know from EFI, and expected BIOS. And part of the Boot Camp stuff and what various VMs will get you is a BIOS-like layer.
Or you might try something of a more recent vintage, like Windows 7, which did reportedly have some support for EFI available.
But it'd be best to ask Microsoft about Microsoft. And see if XP can even do EFI. And I'd expect to see FAT32 (technically FAT28, last I checked) or NTFS for a 500 GB drive.

Trouble displaying my late 2011 MacBook Pro on my 2009 24" iMac

I tried to use a thunder bolt cable from thunder bolt port on my MacBook Pro to the iMac's Mini DisplayPort. No response when using the command F2. The thunderbolt cable doesnt fit as snug in the iMac which was the first sign of trouble. Any suggestions or tips on how to go about displaying the Imac?

About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University

Mini's Pinwheel no response

Similar Messages

Maybe you are looking for