Mini SAP CD for Vista

Hi all,
i want to buy a ABAP book with a Mini SAP installation CD. I need to prepare myself in ABAP again.
My OS is Vista.
Can you please tell me which book i have to buy to get as well a Mini SAP for Vista 32bit. Please give me some titles.
The language should be German.
Thank you very much!

Hi,
You should post this in Trials & preview forum.
I don't think the old versions work on Vista
This new trial version does work on vista.
Check it here
https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
Regards

Similar Messages

MINI SAP on Windows Vista Home Basic

Hi,
I'm trying to install the MINI SAP CD in the Windows Vista Home Basic, but I'm not getting success. I made download of Virtual Microsoft PC but for the version Home Basic, it doesn't have function. Somebody could help me please ?

According to note 1040931 you need the following kernel versions to make it work:
SAP Kernel 6.40:
      DW-Package (183):    operating system version check
      J2EE-Package (n.a.): operating system version check
      NTCLUST.SAR (n.a.): crashes in MMC and Resource Monitor
      SAPINST (n.a.):      installation support on Windows Server 2008
Note that SAP does not yet fully support these operating systems.
Markus

Install SAP GUI for Vista

I understand that there is 7.10 patch 5 available for an upgrade to a GUI compatible with Microsoft Vista. Could i get the install instructions for this. Should this patch be installed over 6.40 or anr pre reqs? When i install i get a message that it cannot be installed or it has been already installed. This is the first time i went in for a 7.10 install. I have installed 6.40 already.
Thanks.

Hi,
SAPSweep is no longer supported with releases 6.40 and 7.10 and it is not required to run this anyway.
The installation of SAP GUI for Windows 7.10 checks for earlier versions of SAP GUI and in case it finds one it directly starts the uninstallation process. Only after this is finished the installation of 7.10 takes place. Therefore it is safe to directly upgrade to 7.10 without uninstalling 6.40 manually first.
Best regards,
Frank

SAP Tutor for VISTA

hi
is there any SAP Tutor for Windows VISTA
if there then can someone provide the link from where i can download
Regards
JM

Hi john,
see the below link
http://www.omgili.com/preview/aHR0cHM6Ly9mb3J1bXMuc2RuLnNhcC5jb206NDQzL3RocmVhZC5qc3BhP3RocmVhZElEPTQ1MjgxOA==
actually we cant .but it will be possible.see this
I find a solution, SAP Tutor Player on Windows Vista: folder c:\PlayerIE right click on file iTutorplayer.EXE --> Properties --> Compatibility tab -->....see above link
http://whitepapers.techrepublic.com.com/abstract.aspx?docid=178498
thanks
karthik
reward me points if usefull
note: I am helping you by providing the urls. i have not checked the first site .it was interlinked and scanned ,so i cant viewed that site.for any unauthorizations i am not responsible.
Edited by: KARTIKEYA PRASAD(EDS-VZG) on Apr 24, 2008 6:59 PM

Mini SAP 7.01 under Windows Vista

Hi every one,
I wanna share my experience with you for installing version 7.01 under Vista. This might help you.
I have installed the newest version ([Message from Klaus Keller| of Mini SAP under Windows Vista and, believe it or not, it all went correct. It is important that you download version Netweaver 7.01, since previous versions are not supported in Vista.
In the download section (http://www.sdn.sap.com/downloads/netweaver/abap/disclaimer.html) you find in file part 1 the description of process in a HTML & PDF file. You must pay much attention to what is described there; otherwise, it might happen that the installation process is not sucessful.
I´m not gonna describe the whole installation process. This is already in the download files. Just a reference of what I did:
1 ) make a backup of your information and have your Windows Vista disk at hand. It might happen that you have to format the computer´s hard disk if something goes wrong (this happened to me a couple of times in previous versions of Mini SAP and Windows XP). This is so, because it is impossible to erase some files and information in the registry (even with the Registry Clean Tool that is also downloadable in SDN). A new installation try was hopeless in those versions.
2) shut the firewall and antivirus off before you start.
3) don´t try to name your computer using special characters like - _ / & % and so on; additionally, name should be max. 13 characters long.
4) you need a user account for windows, even if you´re the only one to use the computer and you must assign a password to that user. You need it once you start the server through the SAP management console.
5) Install the Microsoft loopback adapter
once installed, system names it LAN-connection2 and you must asign a permanent IP address. Press button characteristics for its element Internet protocol version 4, where you enter:
IP-Address 10.10.0.10
Subnetwork mask 255.255.255.0
Don´t touch element Internet protocol version 6 !!
6) file hosts under c:windowssystem32driversetc --> add an entry for the host like this:
#Inicio de insercion
10.10.0.10 jalonso "<-- this is my computer´s name and host name
You must have administrator rights and change the status write-protected for being able to modify it.
7) Process takes less than 1 hour, mostly without user interference.
8) if desired, install Adobe LifeCycle Designer before starting with SAP GUI. It happened to me once (Windows XP) that the installed SAP GUI was erased during installation of LifeCycle. It all then turned into a big mess and I had better to format the hard disk.
9) install SAP GUI on your computer, which is part of the downloaded files.
If installation was sucessful, it might happen that you experience a problem when starting the application server (start --> SAP Netwaever 7.01 --> NSP --> Start application server). You get a red screen with a couple of error messages ([read my post|;). It is not a very serious problem, ´cause you can start the server with the SAP management console anyway.
Hope this helps you when installing Mini SAP 7.01 in your computer.

I am having a heck of a time with this install. My OS is Windows Vista Ultimate.
I've read and re-read several forums and tried all the recommendations.
I've tried installing many time now and each time the install runs to 19% and I get a message " stopping Xserver".
Then it runs to 20% and I get a message "preparing packages for installation".
Then it runs for about 3 seconds and I receive the following:
Errors occurred during the installation.
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
Below is the text from the log file:
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
 at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
 at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
 at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
(Nov 4, 2008 10:49:38 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:38 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, java.lang.StringIndexOutOfBoundsException: String index out of range: -60
STACK_TRACE: 24
java.lang.StringIndexOutOfBoundsException: String index out of range: -60
 at java.lang.String.substring(Unknown Source)
 at com.sap.installshield.maxdb.DBEnumProcessHandler.enumerateForUninstall(DBEnumProcessHandler.java:179)
 at com.sap.installshield.maxdb.maxdb_call_sdbinst.uninstall(maxdb_call_sdbinst.java:362)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
 at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
 at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
 at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
 at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
 at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
I hope that I'm ovelooking something simple and that someone can point me in the right direction to get this up and running.
Any help would be greatly appreciated!!!!
Barbara

SAP Solution for Mini steel plant with DRI Process

Dear all,
I am a metallurgist who spent couple of years in steel and process Industry and then moved to IT Consulting as SAP consultant / business analyst mainly working in the area of solution designing.
Here i will like to describe SAP solution for Mini steel plant with DRI proces.
u201CManufacture Productsu201D Description
The series of operations performed upon material to convert it from the raw material or a semifinished state to a state of further completion. This includes the establishment and maintenance of a CAPEX plan, the planning, scheduling and execution of production activities, the dispositioning of produced goods, the maintenance of production data, the monitoring of production performance and the implementation of engineering changes.
u201CManufacture Productsu201D Objectives
M-010
Compile 3-year CAPEX Budget     Establish the overall manufacturing goals and metrics that the organization will use to measure performance and progress towards objectives. These goals should be consistent with overall organizational strategy/value propositions. Develop long-term goals for production capabilities and manufacturing. These goals should align with the overall goals and objectives of the organization.
M-050
Perform Long Range Production Planning     u201CBudgetingu201D. Long range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Approved capital expenditures from the 3-year CAPEX budget may influence the budget. Range and frequency for budgeting is yearly.
M-060
Perform Medium Range Production Planning     Medium range planning of production quantities based on planned available capacities and known or estimated customer demands. This process may include planning for different capacity and/or demand scenarios. Range and frequency for planning is quarterly.
M-070
Perform Short Range Production Planning     Short term planning of production quantities based on capacities and demands as previously planned in the longer terms, actual customer demand and actual capacities. The result from short range production planning will run into the operational plan for the current and following days. Range and frequency for planning is monthly.
M-080
Schedule Production     This sub-process enables detailed scheduling by resources over the planning horizon. Planned orders that fulfill demands (Stock Transfer Requisitions, Sales Forecasts and Customer Orders defined by due-dates and due-quantities) come from the short range plan. This results in a feasible schedule, optimizing utilization of the production resources. It is based on production process constraints as well as labor resources in order to minimize production costs and also taking into account constraining raw materials availability.
M-090
Execute MRP     The purpose of this sub-process is to generate a Materials Requirements Plan (MRP) for all materials, which are produced or purchased. The MRP process involves looking at current material inventory, planned inbound material deliveries, requirements, lead times and stock levels to generate a detailed plan for future material requirements. The materials requirements will be generated with respect to the three planning horizons, short-term, medium-term, and long term. If an over stock of raw materials occurs as a result of a planning change production and marketing personnel will be informed. This would allow for the cancellations of any unneeded shipments.
M-100
Perform Setup / Changeover     Perform set-up and changeover activities on production equipment as necessary, to prepare for the production of specific materials/grades. Set-up and changeover activities will enable the production equipment to perform operations on materials, as per the specifications called out on the production order. Ensure time is allocated for first off inspection requirements after changeover.
M-110
Execute Production     Insure that the production plan is met by converting raw materials and component supplies into finished and semi-finished products. Batch/lot documentation will be created for individual production orders to provide traceability throughout the process. Each step of the production process is continuously monitored to identify mechanical, quality, and productivity issues and suggest solutions when problems arise. Data collection for performance and financial reporting enables management to take immediate action on manufacturing processes as well as conduct historical analysis.
M-120
Perform Quality Management     Quality management refers to the entire supply chain process. Process activities are related to the evaluation and inspection of key characteristics of semi-finished and finished materials. These evaluations are recorded and acted on based on the results. Report/manage internal quality problems or issues. Install and manage quality control systems to insure product quality. For supplier or subcontractor based issues this data should be used as a performance measure during the vendor evaluation process.
M-130
Manage Product Disposition     This process ensures those semi-finished and finished products that do not meet quality requirements, are prevented from being used and distributed in good finished product to customer, or released for the next step of the production process. A semi finished product is any material that needs to have another operation on line before being shipped to the customer. Finished goods are defined as any material that can be shipped to a customer; in house produced finished goods, subcontracted materials and trading goods. The information required to make decisions regarding disposition comes from the Quality Management system of each production facility. The first step ensures that raw material and returnable goods are dealt with in another subprocess. The reason for the goods not meeting quality standards is recorded along with the results of any investigation to find the cause of the fault. Information is sent to all other parties who need to know: order fulfillment, inventory management and shipping. The process ensures that the most appropriate action is taken to either dispose of, or rework the goods. Disposal or rework may be either through the original materials supplier or subcontractor, or Mittal Steel Point Lisas.
M-140
Maintain Product Related Data     u201CMaterial Master Maintenanceu201D. The Sub-Process 'Maintain Product Related Data' is the list of activities that identify the steps and decision points related to the request for and performance of additions, changes, and deletions to the Material Master file or files. This sub-process begins when a need to create, change or delete a material is identified and ends when the request is either actioned or refused. The sub-process is intended to cover all material types, including finished goods, raw materials, bills of materials, equipment and service, POS, Sundry Items etc. In fact, any product which the company wishes to inventory or purchase. A number of key strategic decisions, including a clear definition of when we issue a new material, will affect this sub-process.
M-150
Maintain Production Related Data     u201CMaster Data Maintenanceu201D. This subprocess identifies the activities related to requesting changes or additions to production related master data. Once a need for master data maintenance is identified, a request is submitted for approval. Data defining production capacities and performance standards (e.g. line efficiencies, material yields, etc.) require Corporate level approval prior to maintenance. Other data that is more specific to internal planning functions are maintained at the plant level. Maintenance requests are returned to the originator whether the request is approved or not to improve communication throughout the system. This subprocess may be triggered by: annual operations budgeting process process/production equipment upgrade or replacement change in facility work schedule (i.e. planned hours or days) change in personnel required to operate process/production equipment new products, formulations, or packaging.
M-160
Operations Execution Reporting     Gather manufacturing information at various points in the production process. Prepare management reports both at the detailed level for plant management and summary level for senior operations management. Reports will be available on-demand and will include - volume, efficiencies (mechanical, line, and labor), yields, downtime, asset utilization, environmental, safety, quality, and financial data. A major goal of this sub-process is to define a consistent method of calculating operations metrics. Some plants will use line information systems and PCSs to collect information. Not all plants are equipped with these systems and the where they do exist, the level of sophistication varies.
M-170
Manage Process Reliability     Optimize capacity by reducing process downtime and ensuring compliance to quality expectations by the reduction of rejects. Install tracking systems to measure line time utilization, quality results, process settings. Conduct root cause analysis, and use the data to develop and implement improved operating procedures.

Thank you for your prompt response. I'm assuming you are still proposing to use Sales order -> purchase order -> invoice verification -> Customer billing process flow. Is that correct?

Mini SAP on Vista 64

Hi all,
Trying to install Mini SAP on Vista 64. I have downloaded from the following page: http://www.sdn.sap.com/irj/scn/downloads;jsessionid=%28J2EE3414800%29ID1969710750DB00238006277026100109End?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
When i download the file however, i can't open it with WinRAR as it appears empty. Strange thing is these files take 1.5 hours to download. Has anyone else had this issue?

After trying all versions of MMC i could find, i have decided to use a virtual machine using XP SP2.

Online license procedure for NW ABAP Sneak Preview and Mini SAP works again

The online license procedure for the NetWeaver ABAP Sneak Preview and Mini SAP systems at www.sap.com/minisap
works again.
Sorry for the inconvenience.
Dirk

I finally resolved my problem yesterday. That is the answer. I did exactly what you mention now: to try and try. I don't know what happened, but when I insisted it worked !
Anyway, Thanks a lot to all
Investiga

New logon language for Mini SAP

Hi everyone,
it is known that Mini SAP (SAP Netweaver 7.01 for ABAP) is delivered only in languages german and english. I´d like to add spanish to it and would like to know how to do this.
In transaction SMLT I´m getting error message "NLS configuration missing for language XX".
Thanks in advance.

-

Renewal License for Mini SAP doesnu00B4t work

Hi,
the link [http://www.sap.com/minisap|http://www.sap.com/minisap] for the renewal of the license key for Mini SAP does not work any more. I get an error page from SAP indicating that the page does not exist.
Does somebody know the new link ??

Hi Dietmar,
Try this link...
http://www.sap.com/solutions/netweaver/minisap.epx
Best regards, Andy

Install errors for mini-SAP

I'm brand new to SAP and trying to get mini-sap installed on my laptop. I have been running into database issues that prevent a clean install of SAP and have now removed all instances of SQL server (Express, 05 and 08). The original errors dealt with sortorders and charsets.
Now I'm getting different but equally frustrating errors - "DBCOMMONDBENV_IND_MSS InternalColdKeyCheck:0 - Please install MS SQL Server before continuing the installation." As soon as I do that, I start getting errors for invalid instanceids and then uninstall and try again. It's a mad circle.
Any recommendations on how to install this?
thanks for your help,
Jeff

MiniSAP comes AFAIK with MaxDB as database, not with SQL Server.
Where did you get the DVD?
Markus

Easy question - where I can find Mini-SAP for download?

Hi everybody,
I want to practice with ABAP at home and thus need Mini-SAP.
Unfortunately I can't find where I can download it.
Can anyone help me?
Thank you in advance!
Cheers,
Kanat

hi,
please visit
https://pgwshop.sap-ag.de/scripts/wgate/ww20/!?theme=66&okcode=start&zzkunnr=1040875&selected_area=1&ostore=doku02en&language=en&login=ITS-ww20-01
Regards
Bernd

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

ANN: SAP GUI for Java 7.10 available for download

Hi all,
SAP GUI for Java 7.10 is now available at http://service.sap.com/sapgui-java.
In case you are not registered on service.sap.com, you can alternatively download it from ftp://ftp.sap.com/pub/sapgui/java/710.
New platforms:
- JSE 6: See System Requirements of platforms for details. Also, usage of JRE 1.4.2 is no longer supported.
- Microsoft Windows Vista (Business and Ultimate editions)
- Mac OS X 10.5 (once the test on the final build of "Leopard" has been successfully completed, see <a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> for latest news)
- HP-UX 11.31
New features:
- Input History: Text previously entered in an entry field is available in a dropdown listbox when the same entry field is reaccessed.
- The installer now can be launched directly from a write-protected directory and the installation process completes considerably faster.
- The Preference Dialog has been redesigned.
- Dynpro Splitter: The feature to display two subscreens divided by a horizontal or vertical splitter has been implemented.
<a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> lists the supported platforms and will include latest news on support for Mac OS X 10.5 (Leopard).
Best regards
Rolf-Martin

Hello Mac users,
ANN: SAP GUI for Java 7.10 rev 1 available for download officially supports Leopard.
Best regards
Rolf-Martin

How to install mini SAP in MS SQL Server 2005 Express?

Hi, is anyone know how to install the mini SAP v4.6 by using MS SQL Server 2005 Express?
I get error when connecting to the Database at 88% of the installation.
Please help. Thank you.

I do not think you can install miniSAP 4.6D on MS SQL server 2005 express.
1) you need the up todate patch to run on MSSE. If SAP did the work to allow it to run, it would be patch 55+. As supplied it is patch zero.
2) You can install on MSDE (MS SQL server 2000) patch 4. Look for my post INFO: Installing MiniSAP 4.6D on a named instance of MSDE (MS-SQL).
3) after the install on MSDE SP4 you would have to change the database code page to 'BIN2' look for the OSS note.
4) then you can start patching through to the most recent.
The main reason you cannot do this is MS have changed the version key format to include '.6' as extra info which SAP cannot interprate, too many dots.
MattG.
Message was edited: add URL

Mini SAP CD for Vista

Similar Messages

Maybe you are looking for