Mini SAP on Vista 64

Hi all,
Trying to install Mini SAP on Vista 64. I have downloaded from the following page: http://www.sdn.sap.com/irj/scn/downloads;jsessionid=%28J2EE3414800%29ID1969710750DB00238006277026100109End?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
When i download the file however, i can't open it with WinRAR as it appears empty. Strange thing is these files take 1.5 hours to download. Has anyone else had this issue?

After trying all versions of MMC i could find, i have decided to use a virtual machine using XP SP2.

Similar Messages

Mini SAP CD for Vista

Hi all,
i want to buy a ABAP book with a Mini SAP installation CD. I need to prepare myself in ABAP again.
My OS is Vista.
Can you please tell me which book i have to buy to get as well a Mini SAP for Vista 32bit. Please give me some titles.
The language should be German.
Thank you very much!

Hi,
You should post this in Trials & preview forum.
I don't think the old versions work on Vista
This new trial version does work on vista.
Check it here
https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2
Regards

Mini SAP 7.01 under Windows Vista

Hi every one,
I wanna share my experience with you for installing version 7.01 under Vista. This might help you.
I have installed the newest version ([Message from Klaus Keller| of Mini SAP under Windows Vista and, believe it or not, it all went correct. It is important that you download version Netweaver 7.01, since previous versions are not supported in Vista.
In the download section (http://www.sdn.sap.com/downloads/netweaver/abap/disclaimer.html) you find in file part 1 the description of process in a HTML & PDF file. You must pay much attention to what is described there; otherwise, it might happen that the installation process is not sucessful.
I´m not gonna describe the whole installation process. This is already in the download files. Just a reference of what I did:
1 ) make a backup of your information and have your Windows Vista disk at hand. It might happen that you have to format the computer´s hard disk if something goes wrong (this happened to me a couple of times in previous versions of Mini SAP and Windows XP). This is so, because it is impossible to erase some files and information in the registry (even with the Registry Clean Tool that is also downloadable in SDN). A new installation try was hopeless in those versions.
2) shut the firewall and antivirus off before you start.
3) don´t try to name your computer using special characters like - _ / & % and so on; additionally, name should be max. 13 characters long.
4) you need a user account for windows, even if you´re the only one to use the computer and you must assign a password to that user. You need it once you start the server through the SAP management console.
5) Install the Microsoft loopback adapter
once installed, system names it LAN-connection2 and you must asign a permanent IP address. Press button characteristics for its element Internet protocol version 4, where you enter:
IP-Address 10.10.0.10
Subnetwork mask 255.255.255.0
Don´t touch element Internet protocol version 6 !!
6) file hosts under c:windowssystem32driversetc --> add an entry for the host like this:
#Inicio de insercion
10.10.0.10               jalonso           "<-- this is my computer´s name and host name
You must have administrator rights and change the status write-protected for being able to modify it.
7) Process takes less than 1 hour, mostly without user interference.
8) if desired, install Adobe LifeCycle Designer before starting with SAP GUI. It happened to me once (Windows XP) that the installed SAP GUI was erased during installation of LifeCycle. It all then turned into a big mess and I had better to format the hard disk.
9) install SAP GUI on your computer, which is part of the downloaded files.
If installation was sucessful, it might happen that you experience a problem when starting the application server (start --> SAP Netwaever 7.01 --> NSP --> Start application server). You get a red screen with a couple of error messages ([read my post|;). It is not a very serious problem, ´cause you can start the server with the SAP management console anyway.
Hope this helps you when installing Mini SAP 7.01 in your computer.

I am having a heck of a time with this install. My OS is Windows Vista Ultimate.
I've read and re-read several forums and tried all the recommendations.
I've tried installing many time now and each time the install runs to 19% and I get a message " stopping Xserver".
Then it runs to 20% and I get a message "preparing packages for installation".
Then it runs for about 3 seconds and I receive the following:
Errors occurred during the installation.
Errors occurred during the installation.
An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
Below is the text from the log file:
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:37 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Ellen/AppData/Local/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Nov 4, 2008 10:49:38 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Nov 4, 2008 10:49:38 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, java.lang.StringIndexOutOfBoundsException: String index out of range: -60
STACK_TRACE: 24
java.lang.StringIndexOutOfBoundsException: String index out of range: -60
     at java.lang.String.substring(Unknown Source)
     at com.sap.installshield.maxdb.DBEnumProcessHandler.enumerateForUninstall(DBEnumProcessHandler.java:179)
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.uninstall(maxdb_call_sdbinst.java:362)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
I hope that I'm ovelooking something simple and that someone can point me in the right direction to get this up and running.
Any help would be greatly appreciated!!!!
Barbara

MINI SAP on Windows Vista Home Basic

Hi,
I'm trying to install the MINI SAP CD in the Windows Vista Home Basic, but I'm not getting success. I made download of Virtual Microsoft PC but for the version Home Basic, it doesn't have function. Somebody could help me please ?

According to note 1040931 you need the following kernel versions to make it work:
SAP Kernel 6.40:
      DW-Package (183):    operating system version check
      J2EE-Package (n.a.): operating system version check
      NTCLUST.SAR (n.a.): crashes in MMC and Resource Monitor
      SAPINST (n.a.):      installation support on Windows Server 2008
Note that SAP does not yet fully support these operating systems.
Markus

Install mini SAP 有錯誤with ColdKeyCheck

請問一下我安裝mini SAP 在vista 裡
可是出現
error: CALCRAM_NT_MSS ColdKeyCheck
要怎麼解呢

Hi Sravan,
That's exactly what I did. I bought the book and I try install on Win XP pro with SQL 2005 dev edition pre-installed.
I'm in possession of the Mini SAP, I own the book. I also looked at the site you suggested
http://www.sap-img.com/mini-sap.htm.
It seems to be I should be able to install on WIN XP pro due to the site above.
This is how a work
1) CD 1 starts with home page
2) I choose REsume (because I have already pre-installed the SQL 2005)
3) Setup starts
4) asks me which directory, it proposes C:\MBS -- I accept
5) It asks me where is the DATA and the KERNEL CD --- it proposes D: ---I accept
6) at the mean time I click on switch view and I see the logs and this is finally I get (I just copy/paste below the errors no the whole log)
So I don't know how to proceed further. I contacted SAP and they propose me this forums.
Could you please advice?
thanks mesut
Error: DBCOMMONDBENV_IND_MSS SubstituteVariables 2 416
       The function RegOpenKeyEx with the parameterlist
       (Software\Microsoft\MSSQLServer\MSSQLServer\Parameters) returned with error code 2 and error text:
        The system cannot find the file specified.
Error: DBCOMMONDBENV_IND_MSS InstallationDo 2 416
      Phase failed.
Error: Main {} 2 416
       Installation aborted.

Error while installing Mini SAP Basis system 4.6D test suite

Hi Gurus,
I am getting error while installing Mini SAP Basis system 4.6D test suite on my laptop. I trying to install this version under Windows Xp. I tried so many times to rectify this error but no use. i followed the instruction in the readme file.The error is below in quote.
"InstController MakeStepsDeliver:108 connection to GUI of installation tool has been cut off.Installation has been stopped."
your help very much appreciated...
Regards
dinesh.a

is win xp supported for mini sap 46d?
-> try netweaver 2004s instead ...
GreetZ, AH

IPod Mini and Windows Vista RC1

Ok, so I connect my mini to my Vista RC1 machine (FULL PC, not BootCamp), then went to bed. A few minutes later, the mini's screen lights up like I just connected it to the machine, then the main ipod folder opens up like it was set to hard-drive mode. For some reason, the iPod keeps reconnecting to the computer. I can't figure out how to stop it. Any help would be appreciated.

Hello pc1971,
And welcome to Apple Discussions!
Have you tried some of the basics such as plugging it into different USB ports on your computer or try a different USB Connector Cable?
Maybe try resetting the device with it connected to your system. To do this, toggle the hold switch on and off, and then press and hold the Menu and Select (Center) buttons together for a few seconds until the Apple logo appears.
Otherwise, I would continue working through the recommend troubleshooting steps provided in this Apple support document.
http://support.apple.com/kb/TS1369
B-rock

How to install mini SAP in MS SQL Server 2005 Express?

Hi, is anyone know how to install the mini SAP v4.6 by using MS SQL Server 2005 Express?
I get error when connecting to the Database at 88% of the installation.
Please help. Thank you.

I do not think you can install miniSAP 4.6D on MS SQL server 2005 express.
1) you need the up todate patch to run on MSSE. If SAP did the work to allow it to run, it would be patch 55+. As supplied it is patch zero.
2) You can install on MSDE (MS SQL server 2000) patch 4. Look for my post INFO: Installing MiniSAP 4.6D on a named instance of MSDE (MS-SQL).
3) after the install on MSDE SP4 you would have to change the database code page to 'BIN2' look for the OSS note.
4) then you can start patching through to the most recent.
The main reason you cannot do this is MS have changed the version key format to include '.6' as extra info which SAP cannot interprate, too many dots.
MattG.
Message was edited: add URL

How to install Mini SAP using Oralce 10g Express Edition!

Hi Guys,
I am fresher in SAP and I want to install Mini SAP on my home desk-top for practicing ABAP, I will be grateful if anybody send`s me links for step-by-step installation guide and another question is, it is to install Mini SAP using Oracle 10g Express Edition?
Early response would be highly appreciated
Thanks in advance,
Reetesh
Edited by: Reetesh Tiwary on Jan 31, 2008 8:59 AM

Dear Andreas,
Thanks for your response!
SAPDB is in-built or I will have to install it seperately, If I will have to install it seperately from where I will get either of these maxdb or sapdb?
Thanks,
Reetesh

Problem in Mini SAP

In Mini SAP when clicking Start SAP MBS before calling SAPLogon-it is giving errors as-
Call clean-up function...
***ERROR=>SigICallExitRoutine: not initialized[Signt.C0239]
return from clean-up function...
(1)disp+work.exe has encountered a problem and needs to close.
(2)msg_server.exe has encountered a problem nad needs to close
What these errors means and how to resolve it.

Did your installation go will, I feel they where not loaded properly, the system is check for work process for message & dispatch.
Option:
1.Try to re-install, and before installation, delete all the files created during the previous process.
2.Try to increase the work process for message & dialog. And for background and update process you can reduce the same.
Prabhu Rajesh.

Install Mini SAP and SQL 2005

Hi there,
I hope someone can help me with the question.
Ive bought the ABAP objects book called An Introduction to Programming SAP Applications from Horst Keller and Sascha Kruger (black color). There are 2 CD's to install the application Mini Basis SAP and work with the ABAP workbench. I was able to install that on a pc Win2000 and it worked and that pc had no sql server/database installed
But I've now another pc Windows XP and has has SQL 2005 Dev edition. I need to keep this.
My problem is when I try to install the Mini Basis I get error. Is it because of Ive already installed the Ms SQL 2005 dev edition?
Im using Windows XP prof edition. How can I install on XP pro this software on my pc keeping the SQL 2005?
I have tried resume_setup.bat and also enabled remote_services for the registry update. no hope.
Can someone please help?
Cheers, mesut
Book reference: ISBN 0-201-75080-5 (SAP Press)

Hi Sravan,
That's exactly what I did. I bought the book and I try install on Win XP pro with SQL 2005 dev edition pre-installed.
I'm in possession of the Mini SAP, I own the book. I also looked at the site you suggested
http://www.sap-img.com/mini-sap.htm.
It seems to be I should be able to install on WIN XP pro due to the site above.
This is how a work
1) CD 1 starts with home page
2) I choose REsume (because I have already pre-installed the SQL 2005)
3) Setup starts
4) asks me which directory, it proposes C:\MBS -- I accept
5) It asks me where is the DATA and the KERNEL CD --- it proposes D: ---I accept
6) at the mean time I click on switch view and I see the logs and this is finally I get (I just copy/paste below the errors no the whole log)
So I don't know how to proceed further. I contacted SAP and they propose me this forums.
Could you please advice?
thanks mesut
Error: DBCOMMONDBENV_IND_MSS SubstituteVariables 2 416
       The function RegOpenKeyEx with the parameterlist
       (Software\Microsoft\MSSQLServer\MSSQLServer\Parameters) returned with error code 2 and error text:
        The system cannot find the file specified.
Error: DBCOMMONDBENV_IND_MSS InstallationDo 2 416
      Phase failed.
Error: Main {} 2 416
       Installation aborted.

Adobe Forms not working in Mini SAP

Hello,
I´ve installed Adobe Lifecycle Designer in my computer and later I´ve installed the certificate under https://www.sdn.sap.com/irj/sdn/nw-downloads, so I´m supposed to be able to work with Adobe Forms in Mini SAP (trans. SFP) but nope.
It should work as stated in some posts in this forum, but negative. Reading the posts, seems like many of you are also unable to work with it. Curiosly I worked with it in 2 cases and don´t know what happened that it comes and goes.
Hopefully some one from SAP can tell us how to make it work.

Hi Alvaro,
After installing Trial NW CE EHP1 Java Stack, how install the essential credential file available at [https://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/10e507e7-2670-2a10-0ba5-eaaabdf7c221] for Adobe Interactive form acttivation ??
Have downloaded credential file dont know how to import it ??
Any help would be gratefull.
Greetings
Prashant

Download mini sap

Hi Techeis,
please give me the link from where i can download minisap software.
i know it comes with abap objects ( i missed that cd) so please let me know where can i download this mini sap.
thanks in advance
Mahesh.Gattu

Hi ,
Goto Forms and search for Minisap Download .
u can see posts related to it.
try this link
https://www.sdn.sap.com/irj/sdn?res=/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
to extend minisap license
http://www.sap.com/solutions/netweaver/minisap.epx
reward if helpful
raam

SAP XI and Mini SAP

Hi friends,
Can we work SAP XI using Mini SAP.
I mean whether Mini SAP consists some BAPI and IDOC where we can import them into SAP XI.
Please provide information
With Regards,
Sagar.

Thank you for your reply..
With ABAP objects book ,I got a CD consists of Mini SAP R/3 ...
My Question is Can we use this to link it to SAP XI.

Problem in Logon to Mini SAP

Hello,
I have installed the Mini SAP with WAS 6.20 in my system, which has Windows XP. I was sucessfull in installing the Kernel CD and SAP GUI. So now the SAP logon icon appears on my desktop and i want to login. I have given the following details on it:
Description: Mini SAP
Application Server: hostname (as stated in the CD demo)
Systemnumber: 00(as stated in the CD demo)
So now the system appears on the logon and when i double click to the system to logon, it brings me an error.
Please do find the error:
partner not reached (host vaishali, service sapdp00)
component NI(Netwrok interface)
Release 620
version 36
module ninti.c
Line 979
error no 10061
error text WSAECONNREFUSED: connection refused
counter 1
Please help me out from this, any help will be greatly appreciated.
Thanks
Sanjeev.

Hello Subash,
Yes I did, but any how I have solved this problem. In SAP Logon the host name was wrong, it is not identical with my computer name.
Now I have another question, is this Mini SAP useful only for ABAP or can we use for Best practices for example Customizing HR, MM etc etc.

Mini SAP on Vista 64

Similar Messages

Maybe you are looking for