Mini thunderport not working

i plug in my cable it flashes but my tv says it has no signal and it was working fine last night any suggestions?

The 2010 MBP does not have ThunderBolt ports

Similar Messages

HT4623 My iPad mini is not working right ?? On some apps

My iPad mini is not working right on some apps

You can always try to reset your device and see if it helps matters any:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

My ipod mini si not working and I can't find the answer.

My ipod mini is not working. I have done all the R things. It won't switch on unless I toggle the hold key, once switched on it asks me to choose a language but pressing the select button does nothing. Can it be saved or should I throw it in a heap with my Dyson vacuum?????????

It's no longer under warranty? Rather than throw it away, there are 3rd party repair site here in the UK (iPod Doctor is one).
Might be worth a try because it seems like a hardware issue rather than software.

The volume down button on my iPad mini is not working.

The volume down button on the right hand side of my iPad mini is not working. I can turn the volume up but not down for sum reason. My father thinks I should take it and have it fixed but I'm wound earring if it's sum thing else!

Thanks; I tried this last night and it didn't work. I think it might be a software issue and will return it tomorrow. I'll try restoring one more time.

HT1766 please help my ipad min is not working on the scren it says iPad disabled connect to itunes

please help my ipad min is not working on the scren it says iPad disabled connect to itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Constant freezing eventually led to mini port not working

I run bootcamp, and it happens on windows as well so it must be a hardware problem. Unfortunately my coverage is up and I'm unable to pay for anything right now.
Basically, the computer was freezing up for a while, a lot of the time it just freezes up for a couple seconds, or a few seconds at a time, and then sometimes it runs fine. Other times it will completely freeze and I'll have to do a hard shut down. Now my mini port stopped working(I was using an adapter for VGA), also both on windows and mac sides. Computer still freezes up. Just had the hard drive replaced a few months ago when it was under warranty, and it was fine until about a month ago.
Not sure what to do, I keep things pretty clean, I used to build PC's. I ran dsk chk everything was fine.
I want to open this thing up but

Thanks to whoever moved this topic to the correct place.

Mac Mini Graphics Not Working Properly

I have two Mac Minis (a July 2009 model and a June 2010 model) that have recently began having video problems.
The problem started on my newer machine which has two Samsung monitors attached, sometime after the last Snow Leopard update.
Last week, the second, older machine which is connected to only a Panasonic LCD HDTV, began having the same issue.
The problem is that the actual screen resolution being run does not match the settings in the System Preferences. It looks like the graphics controller is actually running at 640x480 or 800x600 or something where everything is big but the OS (Snow Leopard or Lion) still thinks it is running at 720p or some other high resolution. So the OS reports that everything is fine even though it is very obvious, things are not OK.
When I move the mouse to the side the desktop scrolls around on the screen. it is like having a window into my desktop.
Changing the screen resolution in Hardware-Displays does not work nor does the detect display button. On the TV for instance, the Displays panel reports 720p even though it is clear that what is on the screen is nowhere near 720p. It makes videos on the TV look really bad and it makes it hard to navigate around the desktop. I can't even fit the entire browser into the sceen.
I had hoped that upgrading to Lion on the machine hooked to the TV would fix the problem, but It did not. Lion displays the same problem. I have not tried putting Lion on the newer Mac Mini yet.
I did find a workaround for the newer one with the Samsung displays – by using fast user switching, sometimes the proper graphics resolution will come up right on the second or third try/user. And if I do get it working properly and the monitor goes to sleep, it will screw the resolution up again when it wakes up, even if it was working properly before. I have temporarily turned off sleep but this is not a good option for me.
Does anyone have any idea what might be wrong or how I could fix it?
Thanks!
Patrick T.

No driver are required or available.
Just what happens when you try using the optical drive?
Try:
Resetting the SMC and NVRAM
Intel-based Macs: Resetting the System Management Controller (SMC)
Also see:
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support

Mini Bridge not working in CS5

I cannot get Mini Bridge to work in Photoshop CS5. When I try to start it, the panel opens and the spinning symbol starts but I get the message "Waiting for Bridge CS5..." and it never makes it past that. I have tried both with Bridge already open and Bridge closed, no difference. "Start Bridge at logon" is checked in preferences. Any help will be appreciated.

Hi,
Try the solutions listed in the following tech note:
http://kb2.adobe.com/cps/830/cpsid_83045.html
If you're still unable to get it working, let me know and I'll try to troubleshoot further.
Regards,
Julie Manley
Adobe

Y min value not working in horizontal Flash Bar Charts

Hello All,
Going crazy trying to work this one out.
I have a problem with a Flash Chart (APEX version 3.0.1.00.07)
The data mainly begins at 97 and goes to no more than 100, therefore I want the min to start at 96 so the results don't look to similiar. Why when I imput my minimum value, it does not work for Horizontal Flash charts ?
It seems to work for stack or vertical charts, can something be done via the "custom XML" ?
Link below use deatils as follows
User Name = [email protected]
Password = helpme
http://apex.oracle.com/pls/otn/f?p=35407:3:550931101789266:::::
select option "Same day"

Hi Deb,
Both of your queries are using multi-series syntax i.e. returning more than one series of data, therefore your generated chart is actually generating 6 series rather than just the two that you're aiming for. You could try changing your queries to ensure they each generate a single series of information, which would then result in the extra Y-axis being applied to your "Series 2". Here's an example of what I mean:
Series 1:
select null link, label, value from (
select 'test' label, 1 value from dual
union all
select 'test2' label, 2 value from dual
union all
select 'test3' label, 3 value from dual
)Series 2:
select null link, label, value from (
select 'test' label, 100 value from dual
union all
select 'test2' label, 200 value from dual
union all
select 'test3' label, 300 value from dual
)I hope this helps.
Regards,
Hilary

N97 mini - restore not working

The restore function on my N97 mini seems not to work. I've setup my N97 to daily backup @ 06:00 due to an software error in the PC Suite I've lost all my messages. Yet when I restore the message the mailbox stays empty.
How do I successfully restore the messages on my N97mini?

Yes for sure, most of us did backups & restored the messages successfully taking into account the backup process itself was successful. You have to make sure that you select the same memory, whether "c" or "e", when you backup & restore. If you select "e" as the memory of storing messages, you had to backup mass memory, & restore mass memory to have your messages back.
By the way, what do you mean by nbu file?
If you like my post & find it helpful click on the Kudos button... Thanks.. ;-)

Dreamweaver respond.min.js=Not working with IE7 & IE8

Six months ago I purchased Dreamweaver CS6 to have my site more interactive, I'm new to Web development.
My computer system is Windows 7 with IE9, when testing my new site all went well, until I uploaded and learned about Internet Explorer Developer Tools, which has cross browser mode to test IE 7 & 8 versions.
Unfortunately my site shows phone view first in IE7 and IE8.
Link to my site http://www.angelsbyangels.com
I have learned that “html5shiv.googlecode.com/svn/trunk/html5.js" and "respond.min.js”
are not working properly with my site in IE 7 & 8.
I AM Grateful for your help.
mlfa

Hi mlfa,
Can you chek out the following discussion on min.js and IE8, and try Sudarshan's solution?
respond.min.js and IE8 (http://forums.adobe.com/thread/1173020).
Thanks,
Preran

My sister's iPad Mini is not working, she was charging it and two of my niece used it, now it is not working and won't open, how can we fix it?

We don't know what to do! We are kinda panicking cuz the iPad Mini of my sister is not working!

When you press and hold the sleep/wake button on the side of the iPad does anything happen at all? Anything show up on the screen?
Also try the first thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

I pad mini screen not working?

i was Using my ipad mini, the battery was at 70% and it just died i plugged it in and it the computer recognizes it but the screen will not work... do u have any advice?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HELP iPad mini sound not working

We just bought our daughter her iPad mini today and the sound just stopped working. It'll only work with headphones; we never put headphones in prior to the sound not working. I tried resetting the phone and phone settings several times, as well as plugging in and out headphones. I changed the switch on the side to lock rotate. I also turned off the mono sound thing. I am at a loss as to what else there is to do. Any other suggestions? I've been at this for a couple of hours now trying to fix her iPad. Please help!

Do you get sounds in any apps on the iPad ?
If you get sound in the Music and Videos apps but not others then have you got notifications muted ? You say that you changed the side switch to rotation lock, but are sounds muted ? The switch on the side of the iPad controls either rotation or mute, the function that it isn't controlling is set via the iPad's control centre : swipe up from the bottom edge of the iPad's screen and it's the right-most of the 5 icons in the middle of it (if the icon is white then it's 'on', tap it to turn it grey and 'off').
Notification mute and rotation lock : http://support.apple.com/kb/HT4085

Mini Cooper not working with Lightning 30 pin Adaptor for iPhone5

I have a 2012 Mini Cooper with a "standard" stereo. I used to plug my iPhone 4 into the cord provided by Mini and it played my music & podcasts. Now, with the Lightning to 30 pin Adapter to connect my iPhone5, my music is now only coming out of 1 speaker and the phone information will not appear. I do not have Mini Connect. Anyone else having this issue? Any suggestions? Thanks.

That happened to me too. Check your Y-cable. Make sure the 3.5mm cable is fully connected to the auxilliary jack on your 2012 MINI Cooper. You may also want to slightly twist the cable connections in the middle box part of the Y-cable if the first solution does not work for you. Good luck!

Mini thunderport not working

Similar Messages

Maybe you are looking for