Mini VGA to Video Adapter ???????

hi - the screen on my old emac is gone (just a vertical line in the center of the screen). i got a new emac (used). i want to transfer the files from the old one to the new one. i need to hook it up to another monitor in order to navigate the system to allow for file sharing. i want to use the "Mini VGA to Video Adapter" and use the composite video connection to hook up to a television set as this seems the cheapest and easiest route on this but many of the listings on the net say that an emac with airport extreme is required. i don't know if my old emac has airport extreme installed. i don't understand why i would need airport extreme if i only need the rca jack connection. does anybody know if this will work without airport extreme ? the old emac is a 700mhz / g4 / 40g / 1g ram - thanks, beaner

hi - the screen on my old emac is gone (just a
vertical line in the center of the screen). i got a
new emac (used). i want to transfer the files from
the old one to the new one. i need to hook it up to
another monitor in order to navigate the system to
allow for file sharing. i want to use the "Mini VGA
to Video Adapter" and use the composite video
connection to hook up to a television set as this
seems the cheapest and easiest route on this but many
of the listings on the net say that an emac with
airport extreme is required. i don't know if my old
emac has airport extreme installed. i don't
understand why i would need airport extreme if i only
need the rca jack connection. does anybody know if
this will work without airport extreme ? the old emac
is a 700mhz / g4 / 40g / 1g ram - thanks, beaner
seems that i have found the answer to this myself. finally found the actual apple page for this (see link at end of message) and 2 of the reviews for the part say that this adapter will not work on my circa 2002 700mhz emac but works on later ones.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M91 09G/A

Similar Messages

  • Wrong 'mini dvi to video' adapter for my 12" Powerbook 1.33

    I recently bought the M9319 mini dvi - video adapter for my 12" Powerbook 1.33 to find that the mini dvi on the adapter is a different size to the one on the computer and the adapters supplied with the computer.
    I've been doing a bit of research into this and it seems a bit of a grey area. Apple have not made it clear in advertising this product that it is only suitable for the newest 12" Powerbooks and even state that it will work with a 1.33 machine in their following article:
    http://docs.info.apple.com/article.html?artnum=86507
    Has anyone had a similar experience, or suggest an alternative product that will work? Did Apple make an older version that works with the 1.33?
    Any help would be much appreciated. Thanks, Graeme.

    Just took the adapter to my local Apple store and they identified it as a mini VGA to video adapter - not what it said on the packaging!
    I've noticed a few posts with this problem, so just double check before you leave the store that the packaging matches the product.

  • Apple Mini-DVI to Video Adapter for eMac ?

    Hi,
    I use an Apple Mini DVI to VGA on my eMac to expand my monitor space, connect to an old Pinceton 15" lcd, both are on 1024 x 768 res in millions colors, and work fine.
    My question is I have plan to buy an Apple Mini-DVI to Video Adapter since some of my project require a transfer process to an old vcr or Sony TRV-27 mini dv cam.
    Would the adapter compatible for my eMac mini DVI port ? because eMac is not mentioned as apple compatible for this adapter at apple store, yet there is a review said it work great on ones eMac.
    Anybody else using this adapter that would share with me ?
    Thank you.

    look like it is indeed an apple mini vga adapter that I use, and now I need an adapter that allow me to connect to a TV, VCR or Mini-DV camcorder.
    will that Apple Mini-DVI to Video adapter compatible to my eMac. Or do they have mini-vga to video adapter on aapple store.
    Thank you any information.

  • Apple Mini-DVI to Video Adapter doesn't fit my aluminum iMac

    I previously had a 17" white iMac (pre-Intel) machine, and about 6 months ago I bought the mini-DVI to video adapter so I could connect it to my television. Worked like a charm. But I recently bought a new aluminum iMac, and the adaptor doesn't fit into the mini-DVI port in the back of the machine. It appears the adaptor and port are both male ends.
    Has the port changed on the aluminum iMacs? The product description for the adaptor on Apple's website says it works with iMac (Intel Core Duo). Isn't the aluminum iMac an Intel Core Duo? I can't figure out why it doesn't fit and which cable I'm supposed to be using instead.
    Any advice would be appreciated!

    Hi Paul
    Yes the Intel iMac [Spec's|http://support.apple.com/specs/imac/iMacMid2007.html] call for the (M9319G/A) Apple Mini-DVI to Video Adapter!
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=M93 19G/A
    The iBook, eMac, or iMac G5 use the Mini-VGA to Video adapter.
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=722 C6629&nplm=M9109G%2FA
    Dennis

  • Apple Mini-DVI to Video Adapter

    I have just purhased a new Macbook. My first mac ever
    My question is regardng the Apple Mini-DVI to Video Adapter.
    Do I read that correctly that I can hook my macbook up via rca and s-video but not composite? Does Apple make one cable that will do both?
    I would like the ability to hook up to a projector which will likely be composite. As well RCA/S-video via t.v or DVD inputs.
    Thanks
    Tig

    For VGA you will need the Mini-DVI to VGA adapter. For composite video you will need the Mini-DVI to video adapter. If you want sound while using the video adapter you will need a 3.5mm to rca stereo cable. This is a y cable like this Example of 3.5mm to RCA Y cable
    FYI the RCA output on the video adapter is composite video.

  • Apple Mini-DVI to Video Adapter Question

    I want to hook up my macbook (late 2008 model) to my tv. Will the Apple Mini-DVI to Video Adapter
    work? If it will work on my tv then what else do I need to get? It looks like you need other wires to hook up to your tv? Thanks in advance for your help!

    The new MacBooks that use the NVIDIA 9400M video chip do _not_ support output to analog TVs. Thus, with the current MacBooks the only way to get output to an analog TV is with a third-party VGA-to-analog TV converter box -- you can't just use one of Apple's cables (although you'll need the mini display port to VGA adapter cable to connect to a third-party VGA-to-TV converter box).
    More specifically, you can _not_ use one of Apple's $19, DVI to Video (composite/S-Video) adapters on the new MacBooks.
    See also this discussion:
    http://discussions.apple.com/thread.jspa?threadID=1927674&tstart=15

  • Apple Mini-DVI to Video Adapter and Mac mini (2009)

    Can anyone tell me whether the Apple Mini-DVI to Video Adapter listed here:
    http://store.apple.com/ca/product/M9319G/A
    works with the latest Mac mini (early 2009)?
    If it does not what other solutions are there to connect to composite, component or s-video?

    KC from Ann Arbor, MI had this to say as a review on the page to which you have linked;
    10-May-2009
    I bought a Mac Mini (May 2009) and this Mini-DVI to Video adapter with plans to use it to send an S-video signal to an analog TV. Though the sales staff at the Apple store said it should work, it does not. The graphics card apparently should support it, and it may be addressed with a future driver update, but as of now this does not work. I have used a mini-DVI to VGA adapter and monitor to verify that the port is working, and also verified that the S-video cable and TV input work. There are third party VGA to S-video/RCA adapters available so I plan to use one of those for my purposes. This is probably a 5-star product when used with the right Mac; however, Apple should have made it clear that having a mini-DVI port on your Mac is necessary but not sufficient for this to work - hence the 3 stars.

  • Apple Mini DVI to Video Adapter is not working. Please Help...

    I bought an Apple Mini DVI to Video Adapter to connect my Macbook to a TV using normal video cable. When I connect the cable, my Laptop DIsplay gives a flickr once and then it shows nothing. I checked Display in the system preference where I don't get a secondary monitor option. My TV is panasonic and it's an old one. I work on Final Cut Pro and it's very very important to see my videos on a TV. What am I doing wrong with the connection? Anyone Please Please help...

    Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
    We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
    My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
    The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
    Dicko

  • Video Out w/Apple Mini-DVI to Video Adapter

    Ok this should be an easy question to answer.
    I've tried searching but I can't seem to find a straight answer.
    All I want to do is watch stuff from my macbook on my tv. I have purchased the Apple Mini-DVI to Video Adapter.
    All I want to know is what cable to I need from the Apple Mini-DVI to Video Adapter to the tv. A name or something or even the place to get it would be very helpful. Thanks!

    The answer depends on which video-in connections your TV has. There are several possibilities, but you're going to have to tell us more about your TV.
    If you have an analog (not HDTV) then it probably has either or maybe both s-video or composite video-in. If you have a choice, s-video is better than composite video.
    If you have an HDTV, it probably has both s-video and composite video but may also have VGA, DVI or HDMI video-in. VGA, DVI and HDMI are all digital and would be better than s-video or composite. But, again, s-video would be better than composite.
    Keep in mind, the mini-DVI to video adapter is video only. You're also going to have to find the cables to plug your MacBook into the TV or stereo to get the audio.
    -Doug

  • Will Apple Mini-DVI to Video Adapter device work on HD TV's?

    I have a Macbook. Will using just the Apple Mini-DVI to Video Adapter work for me if I have and HD TV so that I can watch movies from the Internet on the HD TV screen? How good will the quality be compared to watching on the Macbook itself? And I've noticed how short the chord is for the Apple Mini-DVI to Video Adapter. Will I have to buy another chord to make it reach the back of the HD TV? Thanks.

    As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
    Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
    To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
    The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
    ted.h.
    Mac Mini (Pro Duo) and MacBook (C2D)   Mac OS X (10.4.8)  

  • Will the Apple mini DVI to video adapter work with a macbook? What to Buy?

    I went to my local Apple Reseller and asked for a mini dvi to video adapter to use to connect my macbook to a tv using either s-video or the yellow RCA cable. I was told that they only had the one that was for an ibook and Power book and that this would not work with a Macbook. I would need a different one. Is this correct. If so, what do I need? I have looked on the online Apple Store and cannot find anything that fits this description. They only list one type of Mini DVI to tv adapter? I just want to be able to connect my Macbook to a TV.

    As it happens, I just bought the mini-DVI to video connector for my wife's Macbook (C2D) yesterday. I am in Australia (which is a PAL country), but I didn't see anything on the device or the packaging which indicated it as being PAL-specific. In fact, in Display Preferences when it is connected to the Mac and TV and in use, the panel relating to the TV output (which is shown by the Mac on the TV screen) is where you select between PAL-50Hz and NTSC-60Hz, so I'd guess it is a single worldwide device, rather than their being separately-manufactured PAL and NTSC variants of the connector.
    Anyway, on the back of the top cardboard part of the packaging is a picture of the connectors (because you cannot really see the pins in the Mini-DVI connector itself when packaged, due to an opaque plastic "keeper" over the end of the plug).
    To reconfirm what is said above, the pin configuration on the mini-DVI port on the MacBook and what you need on the Mini-DVI connector is a horseshoe or "U" shape. I don't remember if any specific model of Mac is listed, but I believe as long as it is that U-shaped connector you'll be fine with the same connector kit.
    The "mini-VGA to video" connector is not what you want for a MacBook; mini-VGA is not "U"-shaped inside, but rather two rows of pins in "II" configuration (even though the outside dimensions of mini-VGA and mini-DVI look very similar).
    ted.h.
    Mac Mini (Pro Duo) and MacBook (C2D)   Mac OS X (10.4.8)  

  • '09 mini not compatible with mini-DVi to video adapter?

    I hooked up my new '09 mini to my AV receiver via Apple's mini-DVI to video adapter but got no picture. My previous mini ('06 model) worked fine w/ the DVI to video adapter. I'm thinking the mini-DVI port on the new mini doesn't pass analog signals anymore, i.e., it's now DVI-D vs previously being DVI-I.
    Anyone else have this experience w/ the '09 models? I know it works with the older models. I'm just trying to figure out if I have a defective adapter or if the '09 mini's DVI just doesn't pass analog. I noticed the supplied mini-DVI to DVI cable is DVI-D, so maybe that is a hint.

    I doubt that'd work. Usually these adapters work by connecting "legacy" wires on the newer connectors to an older interface. The mac actually produces all the appropriate signals, and the adapter just hooks the wires together appropriately.
    It sounds like the only analog signals the mac is producing are Red-Green-Blue signals, like you'd use for VGA or component video. It's not producing a composite video signal. So if you convert mini-DVI to VGA, the composite line is going to be dead on both.
    The only kind of adapter that could help you would be one with some amount of circuitry that actually pastes the Red-Green-Blue signal into a composite signal. Something like:
    http://www.svideo.com/appletv2tv.html (I do NOT vouch for this site/product, just an example of what I mean)

  • Problem with apple mini dvi to video adapter cable

    I recently bought an apple mini dvi to video adapter cable and all that it would display on my television screen was black and white colors. The quality of the screen seemed to be okay but it was hard to tell since i did not have any color. Is there something that i can do to fix this problem

    Your probably not doing anything wrong. There are thousands of users with Similar issues and it seems to be with many different adapters.
    We have Mini DP to VGA (3 different brands) and they all fail most of the time. This seems more prevalent with LCD Projectors. I've tested some (50+) with VGA Monitor (HP) and they all worked, LCD Projector (Epson, Hitachi, and Sanyo) and they all fail, DLP Projector (Sanyo) and one worked.
    My Apple Mini DP to DVi works most of the time. My Mini DP to HDMI (Generic non Apple) works every time.
    The general consensus is that Apple broke something in the OS around 10.6.4 or 10.6.5 and its not yet fixed. As we are a school we have logged a case with the EDU Support group so will see what happens.
    Dicko

  • VGA to Video adapter for a late 2004 iBOOK

    I found a free TV and thought maybe i could use it as a larger screen format. so i went searching for cable adapters.
    I did do a search here in the search query box on word search vga to video and results show related to clam shell versions.
    while looking around the Apple web site for a VGA to Video adapter for a iBOOK G4 that shows a CPU speed of 1.2 GHz and a designation of PowerBook6, 5 yes that is how it is written in the System Profiler 'PowerBook6, 5'.
    Using a tape measure the screen itself with out the plastic frame shows a width of 9.5 inches , including the plastic frame shows: 11 and one quarter, that could round off to 12 inch even though it is not at or beyond the point 5 mark.
    The original paper work is some where ?.
    I found a VGA adapter that could possibly work at
    http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
    yet the wording states: The video adapter cable plugs into the video output port (mini-VGA) built into the back of the computers listed in the compatibility section below.
    Compatible with:
    iBook without an external reset button, eMac, iMac G5, or 17-inch iMac (1GHz) with mini-VGA port.
    does not say much for the laptop.
    There is shown a VGA adapter for the iBook here:
    http://support.apple.com/kb/HT2721?viewlocale=en_US
    yet finding it at the store ???
    if i copy the part number in a search query at the store the results show a Lexmark copy machine.
    I found many DVI adapters at:
    http://store.apple.com/us/product/M9319G/A?mco=MTY3ODQ5OTY#overview
    And then here:
    http://support.apple.com/kb/TA27124?viewlocale=en_US
    as copied and pasted here:
    The Apple Mini-DVI to S-Video/Composite Adapter does not work with PowerBook G4 (12-inch) computers,
    the one thing i have notice is that no compatibility charts actually show support for the 1.2 GHz iBOOK G4.
    I also see that there are Mini DVI to VGA adapters, Mini ?, does mention pin numbers ??.
    I was wondering if i could crossover the DVI to VGA thru the adapters using VGA and DVI cables, yet pin numbers and compatibility questions still remain.
    Suggestions ?
    Thank you.

    http://store.apple.com/us/product/M9109G/A?mco=MTY3ODQ5OTY#overview
    The adapter in the above link is the one you need.
    ~Lyssa

  • Iphoto crashing after using mini-dvi to video adapter

    Hi, IPhoto on my Macbook is crashing. I can open it, then as soon as I scroll down it locks up and I have to force quit.
    This started happening right after I used a Mini-DVI to Video Adapter cable to hook my macbook up to my TV. The adapter/s-video connection worked and I was able to see the video on the tv. But iphoto immediately locked up the computer when I went to slide show and now it locks every time I open it.
    Any ideas?
    Thank you:)
    Dorothy

    It means that the issue resides in your existing Library.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

Maybe you are looking for

  • How to get the values of the fields inside pageFragment

    Hi All, I am working on Jdeveloper 11.1.1.5. I have a fragment "home.jsff", in that fragment i have two textboxes(txt1,txt2); Then i have created a bounded taskflow "myTF"and dragged the home.jsff inside it and used as a default activity. Now finally

  • Sales order value limit

    Hi guys, Can any one help me in my scenario. Our client want to limit the value of any sales order. Ex. any sales order should not place above Rs.100000. How it can be done?? Is there std.configuraton or we need to go for customisation. Thank u in ad

  • Removal of Special Characters

    Can Postal Soft Business Edition remove special characters from a data file? I have run a few tests and in some instances special characters were not removed.

  • Popup window without using a command button or command link in Adf10g

    Hi, I need to show a table in a popup window on clicking in a component in the jspx page. The component can't be a command button or a command link, so i can't use 'useWindow' or 'useDialog'. What can be done in such a case. I am using Jdev version 1

  • LR4.2 and color profiles

    HI,  LR4 does not recognize my custom Ilford icm.profiles st in W7 System32 . However CS6 and QImage can . What do I miss? Thanks for your help .