Mini with doc connector

when i use my mini with my universal dock the volume automaticaly sets itself to a nonvariable volume. you can change the volume slider on the screen but it does not affect the output. i am having trouble because my stereo is all the way up and its not loud at all. i know the thing works because i can use my 5g video fine. every now and then it does the same thing, but i can just take it out and put it back in and it works.
how can i change this?

True... The 3G iPod is designed to work with FireWire. Once it is charged up and set up for Mac, it may work over USB for data syncing, but it will not charge over USB (so you cannot use the Restore button in iTunes). You can use it with USB and charge at the same time (and also do the Restore procedure), if you get one of these two-ended docking cables.
http://store.apple.com/us/product/M9688G/A
The USB end connects to the computer. The FireWire end connects to the power adapter (and supplies the power). But if you have FireWire on the computer, use FireWire.
There is also an eject button next to the iPod name under DEVICES. Also, if you UNcheck the +Enable disk use+ option for the iPod (in the iPod's iTunes pane), the +Do not disconnect+ message should go away as soon as the iPod is done syncing. The iPod will not appear on the Finder Desktop, and you can safety disconnect it without manually ejecting the iPod first.

Similar Messages

IPod with Doc Connector - 15GB - Basics for Dummies

Here are some pointers, in case you don't know the obvious. I got my iPod used, and I did not receive a setup guide. I learned a few very basic things THE HARD WAY. I could not get it to even SHOW UP in
iTunes or
in the OS or desktop, on
Mac OS 10.4.11, or
Windows 2000Pro
I was trying to use it via the wall adaptor, and dock cable, with the USB connector that, as far as I knew, was the ONLY FREE CONNECTOR I has available to me.
Here is BASIC DUMMY FACT # 1 -
The Dock Connector cable is a TRI-connector. It has the Dock connector, a USB 6-pin male, and a FireWire 6-pin male connector. Yes, that's right, it has a FIREWIRE. I did not know this, because the FireWire connector is PLUGGED INTO the wall plug part of it. I didn't even know that you could take the wall plug off the cable and just plug the iPod directly into the FireWire port on the Mac. So after hours of frustration and futility trying to load songs onto my old 3rd gen iPod with Dock Connector using USB (Blehhhhh!), I discovered the FireWire 6-pin plug, plugged it into the Mac, and iTunes launched immediately and I was prompted "Do you want to erase and sync?" to which I gleefully clicked "YES". The iPod was previously loaded with about 900 songs from a Windows PC, and every attempt trying to connect via USB was hopeless. FireWire works flawlessly.
Dummy fact # 2 -
When your iPod says "Do Not Disconnect" you have to click the Eject button to "Safely Remove" (like in Windows) and "eject it" from iTunes. Well, what I mean is, I don't know if you HAVE to do this, but I feel better about myself when I do. After FINALLY getting all the songs I wanted on there, NO WAY was I going to take a chance and "pull the plug" on the little thing, with that warning telling me not to, before I investigated a bit.
Now, this is a REAL dummy fact, and I can hear the snickering even though I haven't submitted this yet. But never having using iPod with iTunes, it took me a few seconds to see that there is a little eject icon on the bottom right of iTunes 7.7.1. It was cool to see "OK to Disconnect!" once I found that "Eject" feature.
You know, I had my CD's all in a box and ready to mail the thing back to the guy (a friend) who sold it to me and see if he could find a way to load it up. And the wall plug fell off the cable purely by chance as I was packing it up and boxing it to ship, and when I went to reconnect the dock cable to the plug, I realized it was a FireWire connector. Beauty mate !

True... The 3G iPod is designed to work with FireWire. Once it is charged up and set up for Mac, it may work over USB for data syncing, but it will not charge over USB (so you cannot use the Restore button in iTunes). You can use it with USB and charge at the same time (and also do the Restore procedure), if you get one of these two-ended docking cables.
http://store.apple.com/us/product/M9688G/A
The USB end connects to the computer. The FireWire end connects to the power adapter (and supplies the power). But if you have FireWire on the computer, use FireWire.
There is also an eject button next to the iPod name under DEVICES. Also, if you UNcheck the +Enable disk use+ option for the iPod (in the iPod's iTunes pane), the +Do not disconnect+ message should go away as soon as the iPod is done syncing. The iPod will not appear on the Finder Desktop, and you can safety disconnect it without manually ejecting the iPod first.

I have a 2011 mini with usb connector when I attempt to connect my nano I get the message that I do not have the correct adapter cable. I got the correct adapter cable from the Mini dealer. Any suggestions?

I cannot get my Mini Cooper to sync up with my nano thru the USB port. When I hook up with the cable that came with the Nano, it acknowledges that it is an Ipod however it displays the message that I do not have the correct cable. When I use the audtio adapter cable from BMW it doesn't see the Nano at all. Has anyone else had the issue and what did you do to over come it I tried my nano in another persons car (a Ford) and it worked with no issue.

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

How to connect an external HD to a 2007 Mac Mini with FireWire

I have a 2007 Mac Mini with a 1.83 GHz Intel Core Duo processor, 1 GB of RAM, and an 80 GB HD. I recently migrated to Snow Leopard (OS X 10.6.5) from Tiger (OS X 10.4.11). I purchased a 500 GB external HD from Seagate which I want to use to back up both my wife's notebook PC and my Apple. My Mac Mini has a Firewire 400 (6-pin) female connector on the back. The external HD can connect to a Mac via a Firewire 800 male 9-pin connector. How do I connect the male FW 800 9-pin to the female FW 400 6-pin port? This may sound obvious, but the solution is more challenging than I imagined. The 9- to 6-pin adaptors I've seen online combine a female 6-pin end with a male 9-pin end. I need the reverse of that (female 9-pin FW 800 to male 6-pin FW 400 adaptor)! I bought a 9- to 6-pin cable this week, but ended up with two male 9-pin plug ends, and no way to connect them. Is a solution available using FW, or should I bail and go with a USB 2.0 connection instead?

Most external firewire drives have removable cables that plug into "female" ports on the hard drive. Is the firewire cabling on your external drive different from this? (What is the model number of the external drive?)
If the cable is removeable, simply buy a 6-pin-to-9-pin firewire cable (male on both ends).
monoprice.com is a good place to find these cheaply and in the length you need.

Using Mac mini with LCD TV

I intend to use the mac mini with a 26" HD LCD TV with a resolition of 1366 * 768. Can anyone tell me if this will give a good quality display?

I intend to use the mac mini with a 26" HD LCD TV
with a resolition of 1366 * 768. Can anyone tell me
if this will give a good quality display?
That would depend on the quality of the TV. I am using my mac mini with a Samsung 26 inch HD tv. It works fine at that resolution using the VGA connector on the TV but If I use a DVI to HDMI connection to samsung wont let me use the native resolution which is annoying. So until there is a fix for this I have to use the VGA connection.

Mini Display - VGA connector for new thunderbolt port - is it works?

I am confused about absence of mini display port at a new macbooks - I need definetely to know, will thunderbolt port work with mini display-VGA connector?

Thunderbolt is compatible with Mini DisplayPort, so you can use the Mini DisplayPort to VGA adapter with the Thunderbolt port without any problem.
Note that Thunderbolt is just Mini DisplayPort but with the ability to transfer data. Both of them use the same port

30-pin Doc Connector - Potential Problem ?

Hello,
Today I inserted my charger into the 30-pin doc connector and the phone
started to charge normally. Usually when the charger is not fully plugged in
I push it in a little more so that it has fitted all the way in. I thought the charger
had not gone in all the way (when it had) and I pushed it in more three more
times with a little bit of force. Nothing happened and the phone charged just
fine and everything was normal.
My question is,
1) By additionally pushing in the charger, have I in any way
damaged the 30-pin doc connector?.
2) Should I be concerned for the future?.
3) How can a pin doc connector possibly damage? (ie by pushing or bending etc?)
Thanks
PA

It appears that the device was defective right out of the box and if that's the case I would return it right away for an exchange and indicate the issue that you are having with the dock connector. Also inform them that there appears to be an object that's wedged/stuck in the connector and that you received it in that condition. From my past experiences Apple is very good about exchanging items like that especially when you receive it in that manner/condition. I hope that helps. My apologies I also forgot to point out that if it's an Online purchase you don't have to do an online return you can simply go to your nearest Apple Store along with your printed out Online Apple store receipt that you received with your shipment.

Using my Mac mini with my old Cube - questions

Hey, all-
It was my hope to use my new mini along with my old Cube (the Cube to be an additional hard drive more than anything else) but I can't seemto figure out how to make them work together. The firewire cable I have connecting the two isn't letting the mini recognize the Cube for whatever reason. And I can't see how both of them can be used in the Target Disk Mode since they connect to my Apple flat screen with different connectors.
Hopefully, this is an easy fix somehow - I'm willing to look like a newb just as long as I can make this work.
Any help is appreciated, thanks in advance!
Cheers,
Kevin

I wondered if I hard lined my Cube to it, it would be
recognized on the desktop, yes? Or is the Target
method the only way I would be able to "see" the
Cube.
When connected together with an ethernet cable, you would then need to ensure that the cube was set to allow 'sharing' (in the Sharing preference pane) and give the Cube a share name and then on the mini, in the Finder, go to Network in the Go menu, or Connect to Server in the Go menu and type in the share name given to the Cube. It may ask you for an ID and password that is valid on the Cube, but once entered, will mount the Cube's drive on the mini's desktop.
Firewire connection is going to be a bit faster than ethernet, though for anything but large files you probably won't notice much, but the advantage of using ethernet is that you don't need to do anything to the Cube but start it normally.

Non-admin users can't view GAL with Outlook Connector

Non-admin users are unable to view the Global Address List with Outlook Connector. When I give a test user admin rights (in our portal), the user can view the GAL. The VLV index is setup and functioning correctly for admin users. My versions are Directory Server 5.2 Patch 4, JES 2005Q4, Outlook Connector 7.1.222.4.
I've reviewed the ACIs on o=cp per http://docs.sun.com/app/docs/doc/819-5200/gbnse?a=view and verified that they are getting passed down to the child entries. I added a new ACI for a specfic test user, but I see no effect when I run an ldapsearch as that user. Here are the ACIs:
1. Allow Calendar Administrators to proxy
(targetattr = "mail || uid || icsCalendar || givenName || sn || cn")
(targetfilter = (|(objectClass=icscalendaruser)(objectClass=icscalendarresource)))
(version 3.0;acl "Allow Calendar administrators to proxy - product=ics,class=admin,num=2,version=1";
allow (proxy)(groupdn = "ldap:///cn=Calendar Administrators, ou=Groups, o=cp");)
2. Allow Calendar users to read and search other users
(targetattr = "mail || uid || icsCalendar || givenName || sn || cn")
(targetfilter = (|(objectClass=icscalendaruser)(objectClass=icscalendarresource)))
(version 3.0;acl "Allow Calendar users to read and search other users - product=ics,class=admin,num=3,version=1";
allow (read,search)(userdn = "ldap:///uid=*,ou=People,o=pcc.edu,o=cp");)
3. Allow test users to proxy
(targetattr = "mail || uid || icsCalendar || givenName || sn || cn")
(targetfilter = (|(objectClass=icscalendaruser)(objectClass=icscalendarresource)))
(version 3.0;acl "Allow test users to proxy - product=ics,class=admin,num=2,version=1";
allow (proxy)(userdn = "ldap:///uid=299899598658566,ou=People,o=pcc.edu,o=cp");)
Here's the log for an ldapsearch as a non-admin user:
-bash-3.00$ grep "conn=386080 op=1 msgId=2" access
[02/Jan/2008:15:15:44 -0800] conn=386080 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid"
[02/Jan/2008:15:15:44 -0800] conn=386080 op=1 msgId=2 - SORT cn
[02/Jan/2008:15:15:44 -0800] conn=386080 op=1 msgId=2 - VLV 1:1:dpelinka 2964:11852 (0)
[02/Jan/2008:15:15:44 -0800] conn=386080 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
When the same search is run by an admin user, nentires=3.
Here is the test ldapsearch:
ldapsearch -h vmpt1 -p 389 -D "uid=299899598658566,ou=People,o=pcc.edu,o=cp" -w {password} \
-b "ou=People,o=pcc.edu,o=cp" -x -s "sub" -S "cn" \
-G "1:1:dpelinka" "pdsRole=Employee" uid
David,

Jay,
Here's a full set of logs. The first set is from my test search; the second from an actual OC search. I don't see anything different between the admin and non-admin except for the number of entries returned.
ADMIN TEST SEARCH
-bash-3.00$ ./test_vlvindex.shl
version: 1
dn: uid=375308679900788,ou=People,o=pcc.edu,o=cp
uid: 375308679900788
dn: uid=534616896694744,ou=People,o=pcc.edu,o=cp
uid: 534616896694744
dn: uid=506947161967075,ou=People,o=pcc.edu,o=cp
uid: 506947161967075
index 2973 content count 11893
DS log-bash-3.00$ grep "conn=1964292 op=1" access
[07/Jan/2008:16:36:02 -0800] conn=1964292 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid"
[07/Jan/2008:16:36:02 -0800] conn=1964292 op=1 msgId=2 - SORT cn
[07/Jan/2008:16:36:02 -0800] conn=1964292 op=1 msgId=2 - VLV 1:1:dpelinka 2973:11893 (0)
[07/Jan/2008:16:36:02 -0800] conn=1964292 op=1 msgId=2 - RESULT err=0 tag=101 nentries=3 etime=0
NON-ADMIN TEST SEARCH
-bash-3.00$ ./test_vlvindex.shl
index 2973 content count 11893
DS log-bash-3.00$ grep "conn=1973983 op=1 msgId=2" access
[07/Jan/2008:16:37:53 -0800] conn=1973983 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid"
[07/Jan/2008:16:37:53 -0800] conn=1973983 op=1 msgId=2 - SORT cn
[07/Jan/2008:16:37:53 -0800] conn=1973983 op=1 msgId=2 - VLV 1:1:dpelinka 2973:11893 (0)
[07/Jan/2008:16:37:53 -0800] conn=1973983 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
ADMIN OC SEARCH
-bash-3.00$ grep -i vlv access
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=14 msgId=15 - VLV 0:8:0:0 1:11893 (0)
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=15 msgId=16 - VLV 0:10:9:0 10:11893 (0)
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=16 msgId=17 - VLV 0:17:20:0 21:11893 (0)
-bash-3.00$ grep "conn=1000785 op=14 msgId=15" access
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=14 msgId=15 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=14 msgId=15 - SORT cn
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=14 msgId=15 - VLV 0:8:0:0 1:11893 (0)
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=14 msgId=15 - RESULT err=0 tag=101 nentries=9 etime=0
-bash-3.00$ grep "conn=1000785 op=15" access
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=15 msgId=16 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=15 msgId=16 - SORT cn
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=15 msgId=16 - VLV 0:10:9:0 10:11893 (0)
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=15 msgId=16 - RESULT err=0 tag=101 nentries=11 etime=0
-bash-3.00$ grep "conn=1000785 op=16 msgId=17" access
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=16 msgId=17 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=16 msgId=17 - SORT cn
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=16 msgId=17 - VLV 0:17:20:0 21:11893 (0)
[07/Jan/2008:16:42:58 -0800] conn=1000785 op=16 msgId=17 - RESULT err=0 tag=101 nentries=18 etime=0
NON-ADMIN OC SEARCH
-bash-3.00$ grep -i vlv access
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=1 msgId=2 - VLV 1:1:1:0 2:11893 (0)
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=2 msgId=3 - VLV 0:8:0:0 1:11893 (0)
-bash-3.00$ grep "conn=2220710 op=1" access
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=1 msgId=2 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="cn mail uid objectClass"
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=1 msgId=2 - SORT cn
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=1 msgId=2 - VLV 1:1:1:0 2:11893 (0)
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=1 msgId=2 - RESULT err=0 tag=101 nentries=0 etime=0
-bash-3.00$ grep "conn=2220710 op=2" access.20080107-171147
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=2 msgId=3 - SRCH base="ou=people,o=pcc.edu,o=cp" scope=2 filter="(pdsRole=Employee)" attrs="uid mail cn title company telephoneNumber physicalDeliveryOfficeName objectClass"
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=2 msgId=3 - SORT cn
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=2 msgId=3 - VLV 0:8:0:0 1:11893 (0)
[07/Jan/2008:17:26:04 -0800] conn=2220710 op=2 msgId=3 - RESULT err=0 tag=101 nentries=0 etime=0
-bash-3.00$
David.

Mini USB cable connector

I do not have "Mini USB cable connector" for 6300 Nokia.
Can I use the mini USB cable connector of my cammera for connecting my phone to PC?
I can not find this cable for 6300 nokia phone in mobole phone stores in my country.
Please advice me. Thanks

Hi saeedebr
It is certainly worth trying as most likely that it will work!
Happy to have helped forum in a small way with a Support Ratio = 37.0

Mini Display Port connector for 2008 Mac Pro

I have a 2008 Mac Pro (with 2 x DVI connectors). Is there a graphics card with Mini Display Port connector that I can just wack in and use a 27" Apple LED Cinema Display?

Which 27" display? Current Thunderbolt model or previous mini-displayport model?
For mini-displayport connections look at the apple versions of the ATI Radeon HD 5770 and 5780 video cards. Both have two mini-displayports and a dual link dvi port. The 5770 requires one aux poer adapter cable while the 5780 requires two.
At present there is no way to connect the current 27" TB display to mini-displayport. Only to another TB display or the 2011 computer's apple makes.

What is the best way to control a mac mini with iphone 4s , prefer blue tooth

Hi
what is the best way to control a mac mini with iphone 4s , prefer blue tooth, or I can use the syncing cable as well. but no wifi.
Basically to lanch an app and load a preset for that app.
Thank you

As V.K. noted, check out NetRestore's documentation http://www.bombich.com/software/docs/netrestore/English/index.html or visit the fourms at http://forums.bombich.com/

Do iPod 40GBs with dock connector support VBR?

I have an iPod 40GB, 3rd generation with dock connector (all white wheel). I also use iTunes for Windows. I have been using import settings of AAC 192 kbps (constant bitrate encoding implied) for many years. Does anyone know if the iPod 40GB 3G will support VBR encoding?
Thanks,
Lawrence
iPod 40GB, 3rd generation with dock connector Windows XP Pro

Yes.
http://docs.info.apple.com/article.html?artnum=61476

IPad Mini with Retina Display

I bought a new iPad Mini with Retina Display and the only charger that seems to work is the one it came with. Any other lightning chargers I have bought (including a 30 pin to 8 pin connector) won't charge. Not only is it annoying to have a 3ft cable to charge, but it's annoying to have only one cord.
Does anyone know why the other chargers won't work?

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

TA48312 Hello I have a Mac Mini with OS 10.7.5 And I have a problem that the mouse does not do a right mouse ... I have the mouse model a1197 What should I do? Thank you

Hello I have a Mac Mini with OS 10.7.5 And I have a problem that the mouse does not do a right mouse ... I have the mouse model a1197 What should I do? Thank you

Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673

Mini with doc connector

Similar Messages

Maybe you are looking for