Mini with dual monitors

Hi, I'd like to set up a mini using two monitors, both VGA ,
and both running different resolutions and different apps.
Can this be done?
Thanks,
Carl

Welcome to the Apple Discussions!
The Mac mini has two video ports; mini-DVI and mini-DisplayPort. The mini ships with an Apple mini-DVI to DVI-D adapter which will not help you in this situation. You could purchase a mini-DisplayPort to VGA adapter and a mini-DVI to VGA adapter and then use VGA to VGA cables to connect the adapters to your displays' VGA ports. This setup can support up to 1920 x 1200 pixels, and can be configured in extended desktop mode, allowing you to place different apps in each display's field of view. However, only one of the two displays will have the menu bar, so even with the windows for an app on the other display, all running apps are controlled from the display with the menu bar.
Dah•veed

Similar Messages

Mac Mini with dual monitors (Apple & Samsung)

I just read several conflicting and old posts on these boards in addition to an outright, "sorry it'll never work" from an Apple store genius so I'm going to pose the question again all fresh and new like.
I have a Mac mini late 2012, 2.5 Ghz. I also have a 20" DVI Apple Cinema display (1680x1050px). I would like to connect a Samsung Syncmaster 20" (1600x900px) and run it with desktop extended.
The Apple Cinema display works fine of course. The Samsung has both a DVI and a VGA port. I suspect there's a way to do it, and maybe even take a slight performance hit. I even saw some people say here that the Apple store has a cable for this or that. Sorry I'm just not figuring this out for myself.
Thanks in advance all....

Shouldn't be a problem!???
Video Card:
HD Graphics 4000
VRAM Type:
Integrated
Details:
This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
Standard VRAM:
512 MB*
Maximum VRAM:
512 MB*
Details:
*Apple quietly reports that with 4 GB of RAM installed, this model uses 512 MB of RAM for graphics. With additional RAM installed, more RAM may be reserved for graphics use.
Display Support:
Dual Displays
Resolution Support:
1920x1200*
Details:
*This model simultaneously supports 1920x1200 on an HDMI display or a DVI display using the included HDMI-to-DVI adapter and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600*
Details:
*This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i5-2.5-late-2 012-specs.html

Mac mini with dual monitors

I'm getting ready to purchase a new Mac mini, but I'm confused as to how I would connect my 2 LG L204WT Monitors with DVI connections. Anyone care to explain?

Through some kind of random clicking of things and hitting [revert] I was able to get both to rotate finally to 90'. Wack. It's definitely some issue with the HDMI port failing to refresh.
As long as I don't reboot, I think I have a workaround for now.
For the record - system specs:
Mac Mini, Mid 2011
Processor 2.3 GHz Intel Core i5
Memory 8 GB 1333 MHz DDR3
Graphitcs Intel HD Graphics 3000 512 MB
Software Mac OSX Lion 10.7.1 (11B2118)
(apparently I should have got the 2.5GHz model which has AMD discrete GPU)

Mac Mini with dual monitors running independently?...

Hello,
I have 2 screens that I would like to make good use of. Wondering if the mac mini....or any other singular mac solution would accomplish having both screens working simultaneously on different applications through a single mac mini? Not mirroring screens.....but 1 of my daughters working on a "word" doc on her screen with her keyboard and mouse......and the other daughter surfing the web on her screen with her keyboard and mouse. Also...if this setup is possible....is there a certain mini that I need to be running or a certain IOS?
If not mac mini.....is there another solution/workaround that would allow for this setup? Trying to utilize my 2 screens as best as possible with keeping my hardware to a minimum!! Thanks for the feedback.

No, there is no way to set it up with two different interface (keyboard & mouse) setups.
Unfortunately, it sounds like your about to become a two or three computer family.

Mac and Windows with dual monitors Question

I use a Intel MacPro running Tiger with latest updates in my church. We use the Mac and Keynote 2.0.2 to present PowerPoint slides on the big screen (dual outputs). Everything was going well until the pastors upgraded to new computers running Vista and Office 2007. Now neither pastor's files will load into Keynote. It comes up with an error. The pastors have saved their files from PP as 2003 PPT files, and they still will not open. Error - unable to open file type. The one pastor went back to XP (dumped Vista) but still used the Office 2007 program and saved as PP2003, but the error still appears.
FYI - I noticed that Office 2007 saves with a file with the extension of .pptx instead of the .ppt. Checking the file they gave me shows that it is indead a .ppt file and not .pptx file. It makes no difference.
I believe it is an Office 2007 problem I'm dealing with. I have taken the .ppt file and loaded it onto the PC running PP 2003 and it loads fine, except for some format problems. I then resave it with a different name and tried to load that file (hoping it was converted) , with the same error showing. The problem is transfered with the file. Other files created with the PP 2003 program load fine into Keynote, so it has to be the Office2007 doing something.
So the questions are, is there an easy fix and still use the Keynote program, OR does Keynote 3 take care of this problem in the upgrade, OR should I install Win XP home or Pro and use parallels (which I have)? Would WinXP Home be enough to support the dual outputs and be fast enough? I am familiar with XP Pro not Home.
Any information you may have, could be a help. I need this resolved soon. I hate having to bring in the old Windows PC, after enjoying the quality of the Mac.

David.Austin.Allen wrote:
You should not have issues attaching two displays to the Mac mini. You will not be able to use an iPad as one of those displays.
I have no issues streaming video on demand from all of the media sources which you have listed. My Mac mini is the Early '09, so my hardware is not as powerful as the newest Mac mini.
Dah•veed
Thanks David - glad to here the Mini supports dual monitors, and you're not having any streaming issues. Did you have any special settings, like "no hardware acceleration"? Are you streaming HD content?
If it supports dual monitors, then I would think the iPad could be used as a second display and input device - the demos I've seen with Air Display (from Avatron Software") would accomplish what I'm looking for. Here is a demo at http://www.vimeo.com/16950420 showing the iPad working with a Windows machine, but I've seen them working with Macs as well.
Thanks again
Michael

Run screensaver independently with dual monitors

I was wondering whether, when running OS X with dual monitors, it was possible to run the screensaver on one of the monitors (while still using the other)?
Cheers,
Diego

Nope. Can't do it.

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

Have mac mini with thunderbolt monitor 1yr old, recently updated with new 10.0.2 from apple, now iMovie doesn't seem to support my Sony HDR-XR500 camera. Is there any help on this?

haha, so now i'm thinking. I'm learning the terminal as fast as i can but there are several lines of codes and commands in there that throws up red flags to me that i don't fully understand. It just looks fishy too me. It would be highly appreciated if someone could just check this out just to tell me that i don't need to worry about it. Or point me in the right direction. I just feel un easy about this. ha.

I'd like to project what's on my Mac Mini with Samsung monitor to my standard definition Samsung TV via WIFI. What HDM1 dongle should I buy?

I'd like to project what's on my Mac Mini (with Samsung monitor) to my Samsung TV (standard definition) via my WIFI. What HDM1 dongle should I buy?

lyndafromorwell wrote:
I'd like to project what's on my Mac Mini (with Samsung monitor) to my Samsung TV (standard definition) via my WIFI. What HDM1 dongle should I buy?
You can in fact buy what you want, no need to go with Apple TV
To connect (wirelessly) your Mac to the HDMI on the TV:
They range from $100 on up.

Gnome Crashes on Login after messing with dual monitor settings

Gnome displays the sad monitor and has the error message "..something has gone wrong..~" and will force me to log out. I've only started to experience this after messing with dual monitor settings in nvidia. The dual setup(twinview) worked but once I rebooted, I couldn't get it going for awhile.
Here's my xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 285.05.09 ([email protected]) Fri Sep 23 19:18:19 PDT 2011
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I commented out below to get it in again, but it still feels shaky and unstable to log in now. Sometimes I will get the error and after a log out and login, it'll work.
#Option "TwinView" "True"
#Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
Extra Notes: I have another desktop session with awesome installed(uninstalled now) and could log into that no problem. Awesome was giving me troubles so I uninstalled it. I have 2 gnome desktop sessions, my regular gnome session(the one that crashes), and the other with no window manager(never crashed on startup).
I installed awesome around the same time as configuring the dual monitor setup.
Thanks.

Update.
The crashes are to be expected now. I'm circumventing the whole thing by logging into my other Gnome session without a window manager, logging out and then logging back into my regular Gnome with Metacity.
I've noticed the tty1 sessions(not sure what's it's called) is strange. Apparently my session runs on tty8 but when I try logging in, it'll crash me and tty7 gives me a blank screen with a blinking underscore. The other tty1s work regularly. Not sure if this has anything to do with it.
Is there a way to just reset the Gnome settings?

Need to launch Organizer Twice to work with Dual Monitors

If I open a project or either Photoshop Elements 10 or PRE10 and then click on Organizer it loads, but sits in the taskbar below. If I hover over it the AERO Windows (Win 7) pops up showing it's loaded. But It will not maximize. This is when I had last used it on a second monitor so I can easily compare before and afters. However, if I right click on it and close it, then reopen it, it launches perfectly in the 2nd monitor. Does this every time. I ussually leave it open all the time now to avoid this but I don't know how sesitive the catalogs are if the system is rebooted for some reason.
I did no specific configuration for dual monitors, Just dragged it over there when I wanted to use it.
Thanks,
Joe..

Hi Joe,
This is a known issue with dual monitors and got to know that Organizer people are tracking it as a bug for now.
Hope this will be fixed soon.
Thanks
andaleeb

[SOLVED] openbox margins with dual monitors

Hi community,
I have stumbled to a nasty problem on my first incursion to dual monitors in openbox.
I'm using xrandr with this command (which works just fine BTW):
xrandr --output LVDS --mode 1280x800 --primary --output VGA-0 --mode 1280x1024_60.00 --gamma 1.0:1.4:0.85 --right-of LVDS
and have set a Virtual screen in xorg.conf of 2560 x 1024 pixels.
But, my laptop monitor only handles 1280x800, while my external LCD monitor has 1280x1024, so there is a virtual area under my laptop screen which i'm not using, but i dont really care about that.
The problem is that when I'm setting screen margins, so that maximized windows will respect the panels in the bottom (tint2), in rc.xml (or by obconf) the margins are applied to the virtual screen and only are practical on the external monitor wich has more pixel height.
I'm really missing some kind of per monitor margin settings in openbox, maybe there is and i haven't found it? It makes me wonder because openbox can maximize windows to a single monitor, even if the whole layout it's treated like a virtual screen, so it has some way of distinguishing between them.
I would appreciate any suggestions, thanks.
Last edited by andreamer (2010-07-26 18:32:15)

TL;DR - I'm not aware of any acceptable solution at the moment.
Basically, what you're having problems with, is the "dead area." It can really be quite a pain in the butt if window managers or other screen aware applications don't anticipate it properly. To my knowledge, Openbox doesn't support margins on a monitor-by-monitor basis. In reality, you shouldn't need to be setting margins anyway. Tint2 should be reporting itself as a taskbar, and Openbox should be respecting that.
I have dead area too, with multiple monitors, and Openbox respects both of the KDE taskbars I have running (one on each monitor). (I use KDE and simply replaced Kwin with Openbox.) This tells me that tint2 should be able to cooperate with Openbox. I remember trying tint2 a while ago, and didn't fine it adequate in a dual monitor environment (it was probably a year ago or so). tint2 would need to be setting the _NET_WM_STRUT_PARTIAL hint, and I'm not sure if it is (or if it's doing it properly). See http://standards.freedesktop.org/wm-spe … #id2507618
Also, I do know that the developer for Openbox recently got a dual monitor setup, and she's been adding additional support for dual monitors a little at a time. Hopefully with 3.5, there will be a lot more support. (Margin support for multiple monitors would be great, because it could be a good utility knife for applications that don't care about multi-monitors setups and don't set the proper hints.)
If you're capable of modifying tint2, my course of action would be to try something that works (like the KDE taskbars) and record the hints being set there. Then compare them with tint2 and try to mirror KDE's setup. (If you're a programming lacking experience with X and related nonsense, I'd be more than willing to offer what guidance I have.)
Also, I developed a panel myself (and got pretty far along) using the PyGTK toolkit... But I can't remember if I solved this problem or not. I'll try to check it out and get back to you. (I got as far as implementing a widget system that includes a task list, system tray, clock, menus... It just isn't polished very well. My original intention was for it to be a more robust PyPanel with dual monitor support.)
Last edited by BurntSushi (2010-07-24 22:46:23)

Unwanted keyboard shortcut with dual monitors

Problem:
I have a computer setup with dual monitors (desktop extended). When I have a window open, e.g., Microsoft Word 2007, after I type "1" on the keyboard, the Word Window and mouse relocate to the second monitor. When I type "2" the Word window and mouse relocate
to the main monitor. In the word document, 1 and 2 are typed in the document, but pushing the keys still move the window and mouse to the opposing monitor.
I checked the keyboard settings within Windows and found that sticky keys and such are not enabled. The keyboard has no such features to enable. I also checked the display setup in display properties and found nothing that would indicate such a setup. Google
searches return nothing related to my problem.
What I do know:
-The rest of the numbers on the keyboard work fine. Pressing 1 and 2 on the number pad at the far right of the keyboard do not transfer the active window to the second monitor. Those keys work fine.
-The type of window does not matter. Using notepad, word, excel, internet explorer, sticky notes; all of those windows would transfer to the opposing monitor when I push 1 and 2.
Setup:
Windows XP
Dual-Monitor
Wireless Keyboard and mouse

This pertains to StarTech DVI to USB adapters.
There's an icon in your system tray near the clock, either super utility or usb display device. Right click, and select multi display control panel.
10:20:14 AM
There's a button to disable as long as you have the newer driver from their website. The old drivers had a bug that caused this button to not work

Visualise Spots with dual monitors

I'm finding some eratic behaviour when using Visualise Spots with dual monitors.
I have Development open on one window and the Loupe view open on the other. When I click on the Visualise Spots both windows show the visualisation. When I click the button off - both windows switch to normal view - most of the time.
Occasionally it will switch off in the Development view but stay on the Loupe view on the second monitor. It only goes away when I switch to another image.
Is anyone else seeing this behaviour?
Roy

I have found that's it's linked to zoom level.
I can't quite make out what's going on but the behaviour is very strange.
Roy

Interfacing with dual-monitor machine

Hello all--
I've got a G5 at home with dual monitors on which I run 3D animation software with lots of panels. I'd like to be able to control the G5 from work using a laptop (possibly also connected to an external monitor). Is it possible to display both screens of the desktop using ARDv3 on the laptop? Some users have mentioned they can do this but the size of the remote screens is unsatisfactory. So, again, can you visualize both screens well via the remote computer?
Thanks for any help you can offer.

you can view both screens at once but it will be scaled to fit on the screen you have... so what you see is dependent on the resolution of both client monitors and your admin computer's monitor.
you can also select to view a single monitor of the client computer.
i've never run ARD admin on a computer with 2 monitors so i'm not sure how it handles it but i'm guessing that you can view both monitors on both admin monitors.... it'll probably scale down or up dependent on resolution.

Screen Sharing problem with dual monitors in 10.6

When I'm using Screen Sharing from my Macbook to my iMac with dual displays (10.6.1 on both machines) It works fine when I initially connect, but when I switch to Display 1, it shows me Display 1, but though my cursor moves, I can't click on anything. It won't let me go back to viewing both displays either, and changing from Adaptive to Full Quality or vice-versa makes no difference, as does Scaling. This happens whether I'm on my local network or using Back-to-my-Mac. It was working fine under Leopard, but has been exhibiting this behavior since the 10.6 upgrade.
Mark

This is a very irritating bug. One thing that has worked for me a couple of times (I think a couple of times it also didn't work) is to turn on mirroring. Screen sharing then only shows one monitor, since they are both the same. I'm not sure if the monitors have to have the same resolution for this to work, mine do. The nice thing about this is that before quitting the screen sharing app you can just turn mirroring off again and it will go back to normal. It's easiest to do this by enabling the 'show displays in menu bar' in your displays preferences.

Mini with dual monitors

Similar Messages

Maybe you are looking for