MiniDisplayPort to RCA... Doesn't Exist! Options??

I have a MBP Unibody and a projector with RCA in. I'd like to go from my MBP to the proj., but currently there is no MDP (minidisplayport) to RCA. Super annoying.
Would the next advisable option be MDP --> DVI (or VGA) --> RCA?
Which would throughput a higher quality signal, VGA or DVI, or does it not matter?
Since the projector isn't HD (RCA inputs = quality cap), I don't need HDMI cabling or anything on the exuberabtly expensive side.
What do you guys think is the best way to go about this? Cost isn't really a limiting factor, but I'm not expecting this to be a huge bill... 3rd party adapters to Apple's overpriced MDP --> (anything) adapters are more than welcome... if they work!!

Hey Sin,
HDMI is not appropriate for an RCA whatsoever, so the only way would be what you said, and that would be MiniDisplay to VGA, then VGA to RCA. Both give about the same quality output, so yeah!
-Email me if you need anymore help
[email protected]
Sincerely,
You You Xue
@youyouxue

Similar Messages

  • ICloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option.  I'm prompted for a password to an account that doesn't exist

    iCloud has my old Apple ID and is prompting for a password, but I want to put in the new id, I can't because it is grey and there is no edit option.  I'm prompted for a password to an account that doesn't exist.  Anyone know what I can do to fix this or why this is happening.?  I had no issue putting in my new Apple ID everywhere else, I could sign out of the old and inactive account and then sign back in using my new and proper one.  However, after the update to 7.3 it did a whole welcome to yr iPad and a set up thing and it went to set up iCloud and had my old Apple ID in grey where I can't change or edit it, it wants the password, when I put in the old password, it say yr Apple ID is incorrect but yet it won't let me change it??????? Anyone???

    Sign out and back into your apple id from Settings>iTunes and App stores>(Your apple ID)>Sign Out and then sign in again with the new address. Close app store from running in the background (or restart the phone if your unsure how to do this). If when trying to update any apps they are still asking for the old apple ID, delete and re-install those apps.

  • How to I get rid of an "Open With..." option that doesn't exist?

    I've tried to find out how to remove an element of the "Open With..." options but don't seem to be getting much traction. I have an old application listed in the "Open With..." pull down menu that doesn't exist anymore, but when I select the file, using command-i, to change which application opens the file, it works for that file. I want to change association using the "Change All" button, but when I do that, the "dead" application becomes the default application again and I'm back to square one. Is this fixable? How do I get rid of the useless option? Will I have do do this for each file?

    your link gave me a good starting place...
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -R -all -domain local -domain system -domain user
    this seemed to do the trick... I would have never have solved this without your suggestion.
    thanks.

  • Web Service Data Control option doesn't exist in JDeveloper

    I have tried to find similar question but have not;
    I am using JDeveloper 10.1.2.1 - after selecting Business Tier from a New Gallery dialog box, and then selecting Web Services, I am expecting to see the option "Web Service Data Control" but it doesn't exist. The only 2 options I see are "SOAP Server Connection" and "UDDI Registry Connection". Any ideas why I am not seeing this option. I tried installing the 11.1.2.1 JDeveloper but I see the same choices there too. Any guidance or ideas would be very much appreciated.

    Thanks for the quick response. That was way to easy - I just didn't see that option. Thank you very much for pointing it out.
    FYI - This worked on the 11.1.2.1 install but not on the ver10 install. As long as it works on one of them I am off and running. Thanks again.

  • Hi there - I have a Mac and use the 15.0 version of Adobe Illustrator. I can't locate the pattern tool under the 'Options' tab. I also checked the help section and it doesn't exist.

    Hi there - I have a Mac and use the 15.0 version of Adobe Illustrator. I can't locate the pattern tool under the 'Options' tab. I also checked the help section and it doesn't exist.

    Thanks Manish!
    I was following the instructions my teacher sent and there was no mention of what program the tutorial used. I ended up finding a pattern tutorial for CS5.
    Rosa

  • "Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application

    "Run with Rosetta" option doesn't exist on Get Info menu on Photoshop CS4 application. what should i do? help me.. =(
    hopefully i can running my photoshop cs4 on Rosetta coz some plugin need rosetta to work. thanks..

    xvolution_lp wrote:
    macbook aluminium unibody mac snow leopard 10.6.4. i've already installed rosetta in my mac. i think this problem happen caused other software (CleanmyMac) . i've run the app and i think the app(cleanmymac) remove the universal binaries. what shoul i do?…
    I'll assume that's a Mac-Intel machine, as I'm not familiar with macbooks or laptops in general.  Obviously, if it were a PPC you would not need Rosetta in the first place.
    Well, here's what I would do:
    I'd re-install CS4 in the hopes that will solve the problem;
    Second, I'd stop listening (and probably even speaking) to the misguided soul who recommended CleanmyMac to me;
    Third, delete all traces of CleanmyMac; and
    Fourth, I'd reinstall the OS and all applications on my machine.
    But that's just me.
    Wo Tai Lao Le
    我太老了

  • I am having a hard time with a page that is working for everyone else. When I click on anything in the site I get a message that says "The page you were looking for doesn't exist."  This is happening on both my ipad 2 and my iphone 5. I cleared my cache

    When I click on anything in the site I get the message " The page you were looking for doesn't exist."  This website works for everyone else, but not on my iPad 2 or iPhone 5. I cleared my cache and history on the iPad, but it still isn't working.

    I live in Germany and my credit card is in my native country of Holland .. then it
    doesn't accept my credit card.
    Your first statement explains the second statement. To use the German iTunes Store, you need to prove that you're a resident of Germany (that is required by the content owners who will not allow cross-border sales) and the only way Apple can provide such a verification is by requiring that you enter in either a German credit card or a German-purchased iTunes prepaid card. Since I presume the former is not a possibility, you'll need to do the latter if you wish to purchase content from the iTunes Store. Again, this is not Apple's choice but is forced on them by the content owners as a requirement for Apple being allowed to sell the content. The EU is working on regulations that would force the content owners to allow access pan-EU, but that's still in the works.
    You do not need an iTunes Store account to activate and run your iPad, though; at least, I didn't need one for either of my two iPads. If you only want to set up an account so you can get free iPad apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
    As to the German iTunes Store in English, you can comment to Apple on that via their feedback pages:
    http://www.apple.com/feedback
    Regards.
    P.S. Regarding "this is the only place for a complaint and that will no doubt get removed because
    I'm not full of happy joy sparkles.
    As stated in the terms of use to which we all agreed, this isn't a complaint forum, it's a technical support forum. You don't have to be full of "happy joy sparkles", but posts that are nothing but complaints may indeed be removed. If you want to complain to Apple, use the feedback pages.
    Message was edited by: Dave Sawyer

  • 'Source Directory doesn't exist' error in sender file adapter

    Hi All,
    I m getting the error 'Source Directory doesn't exist' in sender file adapter.
    The source file directory doesn't exist in XI Server. Its in a different system.
    gone through other sdn t hreads.
    the options seems to be
    1. either to mount the Source Directory on the XI Server.
    2. Install a FTP server and use FTP protocol.
    My doubt is that, could nt we give necessary access rights to the XIAFUSER whihc will access the Source Directory?
    Wont it be sufficient?

    Hi Aarthi,
    If you are using system other than XI, then you have to use FTP server
    else check you have proper authorization of read/write to the source directory...
    and check the name of it as well, as it is case sensetive and you have provided the proper details of server.
    check these blog as well...
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    /people/shabarish.vijayakumar/blog/2006/08/01/along-came-a-file-adapter-mr-ftp-and-rest-of-the-gang
    Sachin
    Edited by: Sachin Dhingra on Mar 24, 2009 12:16 PM

  • Can't Completely Uninstall an App That Doesn't Exist Anymore

    Alright, so I've got a very run-of-the-mill, mid-2011 Macbook Air (1.6 GHz Intel Core i5, 2 GB 1333 MHz DDR3, running Yosemite) and everything really does run just fine. The only issue I've been having is completely eliminating traces of a particular app that actually doesn't exist anymore.
    Some time ago, I downloaded a little To-Do List sort of thing called Intuition+. It was made to be a checklist, and also a planner that would integrate with Calendar. Not very long after I got the app, the company deleted it entirely. I did as much as I knew how to get rid of anything associated with it on my laptop, but it still shows up as a calendar option in Calendar.
    Now, I know it's probably harmless, but it drives me nuts that I can't get rid of the **** thing 100%. It was called Intuition+. Any advice?
    Apologies if I'm leaving out any info that might be helpful-- I've never posted here before, so let me know what I can do to help you help me 8)

    So this is an app that you've downloaded from the iTunes store, not from the Mac App Store ? If it is then it should be in the Apps part of your iTunes library - if you have iTunes 11 on your Mac then option-command-S should enable the left-hand sidebar, and on that sidebar there should be an Apps section e.g.
    But apps from the iTunes store can only be installed/used on iOS devices i.e. an iPhone, iPod Touch and/or an iPad (they will appear in your iTunes library for syncing and backup purposes) - you can't use iTunes apps on a Mac.

  • Directory ORACLE_HOME doesn't exist. in Database Upgrade 11.2.0.2

    Hi all,
    I am following the below document for database upgrade on EBS 12.1.3 database from 11.1.0.7 to 11.2.0.2.
    "Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]"
    We have completed upto
    6.     Install Oracle Database 11g Products from the 11g Examples CD
    but not "3.Update application tier context file with new database listener port number (conditional) "
    as it was conditional
    Old home:-F:\oracle\PROD\db\tech_st\11.1.0
    New Home:-F:\app\mocppd\product\11.2.0\dbhome_1
    set ORACLE_HOME=F:\app\mocppd\product\11.2.0\dbhome_1
    set ORACLE_BASE=F:\app\mocppd
    set LD_LIBRARY_PATH=F:\app\mocppd\product\11.2.0\dbhome_1\LIB
    set PERL5LIB=F:\app\mocppd\product\11.2.0\dbhome_1\perl\libcd F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old
    perl cr9idata.pl
    Got error on
    "7.Create nls/data/9idata directory" as
    perl cr9idata.pl
    F:\app\mocppd\product\11.2.0\dbhome_1\nls\data\old>perl cr9idata.pl
    cygwin warning:
      MS-DOS style path detected: F:/app/mocppd/product/11.2.0/dbhome_1
      Preferred POSIX equivalent is: /cygdrive/f/app/mocppd/product/11.2.0/dbhome_1
      CYGWIN environment variable option "nodosfilewarning" turns off this warning.
      Consult the user's guide for more details about POSIX paths:
        http://cygwin.com/cygwin-ug-net/using.html#using-pathnames
    Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist. Can't p
    roceed.I didnot understand why the "Directory /F:/app/mocppd/product/11.2.0/dbhome_1/nls/data doesn't exist" has '/'
    in starting of the path
    Thanks
    Nawneet

    but why it taking /usr/bin/perl. we are in windows .This is an expected output since you use Cygwin.
    Please set perl to the one you have under RDBMS %ORACLE_HOME% and try again (%ORACLE_HOME%\appsutil\perl).
    Thanks,
    Hussein

  • I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?

    I have an Iphone 5s with an account icloud that isn't an iCloud id, why? I cannot remove and the mail that names id doesn't exist anymore; what can I do?

    Welcome to the Apple community.
    If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact Apple ID Support, upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
    You will need to show patience with the procedure and be prepared to demonstrate without question that the account belongs to you. Don’t expect access to be restored immediately and if you aren’t the owner of the Apple ID registered to the device the account won’t be reset.
    This is answer is provided from my own database of boilerplate responses and the content was last reviewed and/or tested on: 2014/12/18

  • Write to text file. Append to existing file. Create file if file doesn't exist.

    Hi folks,
    up to LabVIEW 7 there was a wonderful "Write to Text File" vi which allowed the option "Append to File". Now, in LabVIEW 8, this old vi is not longer supported anymore. Instead, I am suggested to use a new "Write to Text File" vi. This vi does not offer the option "Append to File" anymore. Rather it is proposed in the online help that one should use the "Set File Position" in order to append text to the file. This much less straightforward than the old solution. Furthermore, I miss an option which would create the complete path if it doesn't exist yet.
    To summarize: Isn't there really any smart "Write to Text File" vi available which offers both the options "Append" and "Create path if file does not yet exist". Of course, I could write such a file on my own but I am sure that it is of such general interest that it already exist. In any situation, when a log file shall be written, the wanted vi would be ideal.
    Thanks a lot,
    Peter

    Ray,
    I know that the old vi is still available. See the screenshot which I attach to this message. What I am missing is an option "Create file or even complete path if file or path do not yet exist.". Is there any reason why NI doesn't provide neither this option nor a simple "Append to file" functionality in the new "Write to Text File" vi?
    Regards,
    Peter
    Attachments:
    Clipboard01.png ‏7 KB

  • Why is Mail asking me for the name of an smtp server for an email address that doesn't exist?

    I've migrated from Snow Leopard to Mountain Lion on a new Mac, but in trying to use Mail on ML, it keeps asking me for the name of an smtp server for an email address that's never existed. The addy has my user name correct, but the server part of the address doesn't exist, or at least I've never used an email address with that provider. On ML there's no plist file for Mail, so nothing to delete there. What else can I do to get Mail working? The only other option I have is to abandon Mail as being crippled and useless, and use Postbox, which for it's price (US$9.95) is an attractive option. OTOH, I've paid for Mail after all, so it really ought to work. Any clues as to what I can do to stop its nonsensical behaviour? How do I file a bug report?
    TIA.
    Pauline

    Amasis wrote:
    On ML there's no plist file for Mail, so nothing to delete there.
    ~/Library/Containers/com.apple.mail/Container.plist
    (Go to your Finder "Go" menu hold the option key to choose "Library", since the ~/Library is hidden on ML)

  • [Solved]Boot from USB HDD - Root device doesn't exist. Major/minor

    My problem is that the kernel seems (or starts) to load, but then I get an error:
    Root device 'UUID=1234 . . .' doesn't exist.
    Attempting to create it.
    ERROR: Unable to determine major/minor number of root device "UUID=1234 . . .'
    You are being dropped into recovery shell
    I found a few links on the web and in the forums, but nothing that really solved it for me. The solved ones usually downgraded the kernel.  I haven't done that yet.  I thought I'd try here first.
    I have a 320GB USB HDD that I have been using to experiment with different linux distros.  I have a few working successfully (OpenSUSE,Mint,Ubuntu,Debian,Fedora,etc).  I'm very new at this but have been reading a lot and putting a lot of time into it.  I have legacy grub loaded on the MBR and use the menu.lst on my openSUSE partition to boot everything.  Because the partitions for some of the distros are so far into the disk I needed to create directories on openSUSE's /boot directory to contain the kernel and initrramfs files (like /boot/fedora).  This seems to work for the other distros.  I did the same thing for Arch.
    So when I installed Arch I haven't used the bootloader section of the installation.
    I'm using the 2011.08.09-netinstall-i686.iso Live CD.
    I tried a few things including:
    1.    changing the HOOKS in /etc/mkinitcpio.conf
        a.    adding usb to the "HOOKS"
        b.    removing and adding autodetect
        c.    adding and removing "sata_sil" (although I'm not even sure if my device uses it)
    2.    changing the kernel line:
        a.    from using "UUID=" to (hd0,1) to sdb1.
        b.    added rootdelay=8
    3.    repartition all of my arch partitions using cfdisk from my Live CD and reinstall. I used gparted on OpenSUSE to do it the first time.
    This may be connected. When I fdisk -l from the Arch Live CD I get extra data and an error for each of my arch partitions (and only my arch partitions):
    Disk does't contain a valid partition table
    When I fdisk -l from OpenSUSE I don't get the data paragraphs or errors about the arch partitions?
    Here is my /etc/fstab:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    tmpfs /tmp tmpfs nodev,nosuid 0 0
    UUID=0e7556ef-b832-43e9-a8ba-c68dd2cd6143 /var reiserfs defaults 0 1
    UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b / ext4 defaults 0 1
    UUID=cd78ab04-742d-4ba5-9727-90727de2dd14 swap swap defaults 0 0
    UUID=dc5685e3-35b0-46d4-b259-61f2530ff36a /home ext3 defaults 0 1
    And my HOOKS:
    HOOKS="base udev autodetect pata scsi sata usb filesystems usbinput"
    And my menu.lst:
    1
    default 0
    timeout 32
    gfxmenu (hd0,1)/boot/message
    ###openSUSE on sda2 - legacy grub
    title openSUSE 11.4 - Celadon - gnome
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 resume=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part1 splash=silent quiet showopts nomodeset vga=0x314
    initrd /boot/initrd-2.6.37.6-0.7-default
    ###openSUSE failsafe on sda2 - legacy grub
    title Failsafe -- openSUSE 11.4 - 2.6.37.6-0.7
    root (hd0,1)
    kernel /boot/vmlinuz-2.6.37.6-0.7-default root=/dev/disk/by-id/usb-Seagate_FreeAgent_GoFlex_NA0E702X-0:0-part2 showopts apm=off noresume nosmp maxcpus=0 edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 nomodeset x11failsafe vga=0x314
    initrd /boot/initrd-2.6.37.6-0.7-default
    ###floppy###
    #title Floppy
    # rootnoverify (fd0)
    # chainloader +1
    ###Fedora on sda5 - legacy grub
    title Fedora 15-Lovelock gnome
    root (hd0,4)
    configfile /boot/grub/grub.conf
    ###Mint on sda6 - grub2
    title Mint 9 Lucid Lynx gnome
    root (hd0,5)
    kernel /boot/grub/core.img
    savedefault
    boot
    ###PCLinux on sda7 - legacy grub
    title PCLinuxOS 2011.6 KDE
    root (hd0,6)
    chainloader +1
    ###Ubuntu on sda8 - grub2
    title Ubuntu 10.04.2 gnome
    root (hd0,7)
    kernel /boot/grub/core.img
    savedefault
    boot
    ####arch on sda10 - legacy grub
    title ARCH
    root (hd0,1)
    #root UUID=XXXXXXXXXX44c5a3cd-dcb5-4cf1-933e-7a8ebac2a992
    kernel /boot/arch/vmlinuz-linux root=UUID=510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8
    #kernel /boot/arch/vmlinuz-linux root=(hd0,9)
    #kernel /boot/arch/vmlinuz-linux root=/dev/sda10
    initrd /boot/arch/initramfs-linux.img
    savedefault
    boot
    ###Debian on sda11 - grub2
    title Debian 6.0.2.1 squeeze gnome
    root (hd0,1)
    kernel /boot/debian/vmlinuz-2.6.32-5-686 root=UUID=2b6052e2-ecdf-4796-81c8-b9e9142ca159 ro
    initrd /boot/debian/initrd.img-2.6.32-5-686
    savedefault
    boot
    ###Mandriva on sda12 - legacy grub
    title Mandriva 2011 KDE
    root (hd0,1)
    kernel /boot/mandriva/vmlinuz-2.6.38.7-desktop-1mnb2 root=UUID=5033f7fb-cac7-4db5-920c-c8bd2b51365f ro
    initrd /boot/mandriva/initramfs-2.6.38.7-desktop-1mnb2.img
    savedefault
    boot
    Here is my fdisk -l from OpenSUSE.  I'm not quite swift enough to mount the hard drive and use the script utility from the Live CD yet, at least not tonight:
    Disk /dev/sda: 320.1 GB, 320072932864 bytes
    255 heads, 63 sectors/track, 38913 cylinders, total 625142447 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x000c3bbb
    Device Boot Start End Blocks Id System
    /dev/sda1 2048 4208639 2103296 82 Linux swap / Solaris
    /dev/sda2 4208640 46153727 20972544 83 Linux
    /dev/sda3 46153728 87113727 20480000 83 Linux
    /dev/sda4 87115770 614031755 263457993 5 Extended
    /dev/sda5 87115776 128075775 20480000 83 Linux
    /dev/sda6 128077824 169037823 20480000 83 Linux
    /dev/sda7 169039872 209999871 20480000 83 Linux
    /dev/sda8 210001920 250961919 20480000 83 Linux
    /dev/sda9 250963968 291923967 20480000 83 Linux
    /dev/sda10 291924031 332886015 20480992+ 83 Linux
    /dev/sda11 332888064 373848063 20480000 83 Linux
    /dev/sda12 373848678 414992383 20571853 83 Linux
    /dev/sda13 414994432 435474431 10240000 83 Linux
    /dev/sda14 435474495 455956829 10241167+ 83 Linux
    /dev/sda15 455958528 578881535 61461504 b W95 FAT32
    /dev/sda16 578881599 614031755 17575078+ 83 Linux
    Disk /dev/sdb: 160.0 GB, 160041885696 bytes
    255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
    Units = sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x95aa95aa
    Device Boot Start End Blocks Id System
    /dev/sdb1 * 63 294889139 147444538+ 7 HPFS/NTFS/exFAT
    /dev/sdb2 294889140 312576704 8843782+ 7 HPFS/NTFS/exFAT
    That's it for now.
    Last edited by newbie55 (2011-09-23 22:19:58)

    I'm IN!  Thanks everyone for your suggestions!
    The arch system didn't like the identifier I was using for the root partition. By looking at the /dev/disk/by-id while the arch system was running, I could see what the system wanted me to call the partition.  So after the system error'd-out and I was in the recovery shell at the [ramfs /] prompt:
    # ls -lF /dev/disk/by-id > by-id.txt
    # vi by-id.txt
    I could have used any of the identifiers listed in the by-id (there were 3), by-uuid(1), by-label(1) or by path(1). I tried them all. I had to write these down by hand because it is a ram filesystem.
    The article that finally got me there is:
    https://wiki.archlinux.org/index.php/Pe … ice_naming
    Anyway my openSUSE grub menu.lst ended up like this:
    ####arch on sda10 - legacy grub
    title ARCH
    root (hd0,1)
    kernel /boot/arch/vmlinuz-linux root=/dev/disk/by-uuid/510bb601-13c1-46ec-87c0-a800dd2efb8b ro rootdelay=8 rootfstype=ext4
    initrd /boot/arch/initramfs-linux.img
    savedefault
    boot
    It's easy once you: 1. beat your head against the wall
                        2. read further
                3. repeat 1 and 2
    Back to the "Beginner's Guide",4 Post-Installation.  Yikes!

  • [Solved] Boot error: /etc/rc.d/functions /etc/netcfg doesn't exist

    Hi everybody,
    Well, after a bit of playing around, wiki reading and trouble-shooting, i now have an automatic wireless connection at boot via netcfg2 and my wireless profile. Great stuff.
    By the way, whoever wrote this: http://wiki.archlinux.org/index.php/Net … _netcfg_v2, you deserev a medal.
    Anyway, to the problem. I get an error message at boot which informs me that there is an error in my /etc/rc.d/functions file at line 155, stating that /etc/rc.d/netcfg doesn't exist (which is correct).
    However, when I look at the functions file, I cannot for the life of me see the problem.
    Line 155 is: /etc/rc.d/$1 start
    154 start_daemon() {
    155 /etc/rc.d/$1 start
    These are my daemons:
    DAEMONS=(syslog-ng cups hal avahi-daemon sshd snmpd xinetd portmap netcfg net-profiles)
    The obvious thing would be a problem with the netcfg daemon, but everything works ok, so go figure.
    The only real reference i found was this:
    http://www.archlinux.org/pipermail/arch … 03699.html
    I'm fine with an optional dep - how about we throw a comment above
    'NETWORKS' and have rc.sysinit throw a warning it NETWORKS is defined
    but /etc/rc.d/netcfg isn't found?
    Any help appreciated.
    richs-lxh
    Last edited by richs-lxh (2008-09-02 12:09:51)

    Damn! I had a feeling it was going to be an easy one. I am pretty sure I tried that, oh well.
    Thanks for the quick replies men. Thread marked as [Solved]
    richs-lxh
    Last edited by richs-lxh (2008-09-02 12:10:15)

Maybe you are looking for