MiniDLNA won't auto start

MiniDLNA starts with no issues, but on boot it fails to start.
I've read the following link:
https://wiki.archlinux.org/index.php/Mi … _autostart
But the NetworkManager Wait Online service doesn't seem to fix it. Any alternatives or solutions?
The service starts no problem after the system reboots and I manually type:
systemctl start minidlna
I even tried making a cron job using crontab that executes a script that runs systemctl start minidlna every 1min, but that doesn't seem to be working properly.
Last edited by wmcmahon (2013-08-15 18:56:20)

I have the same problem. Anyone with some help?
I have tried a few things including an issue resolved in https://bbs.archlinux.org/viewtopic.php?id=150784
but now the pid file is not created on boot or when starting the service with systemctl and minidlna won't start
-but runs fine when I manually run minidlnad (not started with systemctl)
Last edited by cellar (2013-09-02 16:35:32)

Similar Messages

Oracle 11g XE won't auto start

Installed XE (11g) on a XP machine. When system is restarted listener service starts but DB service doesn't. It is set to auto start. If I manually start the DB service it starts without issue and we can use the system.
I've even set the service to try to restart in case of a failure (to see if that made a difference.....nope).
Any ideas?

Hi,
What's set to registry?
HKEY_LOCAL_MACHINE -> SOFTWARE -> ORACLE -> [HOME0] -> ORA_[SID]_AUTOSTART
Regards,

I plugged IPOD in to sync ( first time in over a year) it auto started with the "Do Not Disconnect", but did not sync. Now the IPOD is stuck in that mode, won't shut off, won't sync, won't work. is there a way to reboot it?

I plugged IPOD in to sync ( first time in over a year) it auto started with the "Do Not Disconnect", but did not sync. Now the IPOD is stuck in that mode, won't shut off, won't sync, won't work. is there a way to reboot it?

It has already been 6 days from your post, my apology for responding so late, but it is my habit to help only the leftovers, which the other contributors missed.
Toggle the hold switch make sure there is no red showing.
To reboot an iPod. (Or RESET in Apple iPod jargon)
Press Menu and Center button for about 10 secs till the Apple logo comes ON , this would not erase any data from your iPod.
I would advice you to leave the iPod charging for about 4 hours, if it has been discharged for 1 year or more, and also Apple recommends that you charge the iPod at least once a month, to prevent a discharged battery leakage, which may corrrode the circuitry in the iPod.
Hopefully you don't get the dreaded RED X on the iPod screen.
Good Luck!

HT4539 Is there any way to auto-start the Apple mail app?

Our company offers a 7/24 service where a user can leave a voice mail in our system and our mail server will send an urgent mail message to the iPhone of the employee on duty so it can be handled in a timely manner. The problem we are having is that if someone turns off their phone and starts it again (or if the user opens the running apps window and shuts down the mail app), the users are not getting those urgent emails.
While I understand having an auto-starting app would be undesirable, since every developer might start activating that feature, does Apple iOS6 have any way to tell the mail app to restart on iPhone boot? We have a few people using other smartphones with a competing O/S that sounds similar to "asteroid" ;-) and the mail appears to be always operational, even if you shut down the app.

And be sure to set up Notifications for mail so the phone will beep, buzz, flash, whatever when a message comes in.
One issue though (discussed elsewhere): the phone will only Notify once. If you didn't hear or see it, there won't be any further warning (unlike, say, Blackberry's flashing LED). You're gonna have to grab the phone and at least bring up the lock screen to see if there are any notifications queued up.

Indesign CS5.5 won't open/start after a recent windows 8 update -- how to fix?

I just had a Windows 8 auto update happen and then my Indesign CS5.5 won't open/start. When I go to open it, it gets to the usual screen but then an error message shows up saying that Windows has encountered a problem and needs to shut the program down, and will notify me if a solution exists. What to do?

Do you see anything useful in the Event Viewer logs? Have you tired rebooting? Does it start if you log in with a different username?

Auto Start Disable

This is ridiculous. I shouldn't have to be a programmer to not have Adobe videos auto start as soon as the page opens on CNN or whatever. At work I often want to have a moment. Or if there's a text story below, I want to read the story and not view the video at all.
WHY CAN'T I DISABLE AUTO START??

Happy,
Your iMac (and Mac OS X) has excellent support for "multiple users". I would suggest reading up on the concept. Just click on Help in the Finder and search for "multiple users". Lots of information.
This way, your son can have IM launch at start up, while you won't even have access to it.
It will also prevent him from mucking up "your" computer with his "necessary" add-ons. For example, LimeWire.
,dave

Auto sync vs auto start

before itunes 9 I was able to set my iphone to auto start and not auto sync, now if auto sync is checked to turn it off, auto start is grayed out and my iphone will not start when plugged in? Does anyone know if this is a new feature for 9.0.1 or is it a bug?

"Secondly, I don't know how to get the SD version without paying for it a second time. Can you tell me how to do that?"
This is not part of the sync process at all. You import these as you would from any digital camera.
" I delete the music off my computer once I upload it to my portable devices to conserve memory."
Not a good idea. The iphone is not a storage device. It is meant to mirror the selected content on your computer. You are asking for problems if you delete the music from itunes.
"Is there a way to organize music without syncing?"
You can manually manage, but if the music is not in itunes you will likely run into problems at some point.
" If I change the settings to manually manage music and videos, will it delete all the photos and videos I currently have synced? "
It should not erase the photos and videos from your computer ( home videos and pics). It will erase the current itunes music and videos.
"If I go to manually manage will those videos on my camera roll get erased? "
No. Camera roll is not part of the sync process. It is temporary storage for vids/pics until you can import them to your computer.
"If I change to manually manage, will apps be manually managed too? How do you go about manually managing apps? "
I do not believe that you can manually manage apps.
Here is an article on Manually managing:
If I change to manually manage, will apps be manually managed too? How do you go about manually managing apps?
"Since the phone won’t be synced anymore, how do I do a back up and restore? What information does a back up save? How do I restore from that back up? "
Apps and music are not part of the backup. You can read about the backup here:
http://support.apple.com/kb/HT1414
"If I ever wanted to go back to syncing, will everything get erased again?
Yes.

Stop Napster Auto Starting when I connect my

I wonder if anyone has any tips about this one...
When I first connected my ZMP I accidentially chose "always start Napster to syncronise" from the auto start list.
Normally I choose "don't do anything" but I chose Napster by accident this time.
Anyway - normal autostart removal techniques dont work with the ZMP...
Anyone any ideas how to stop this auto starting?
cheers!
dj_T

When connecting your MicroPhoto, the "MTP icon" will appear in your taskbar briefly. Double-click that icon to bring back the "MTP Media Player" autostart box; you can then change the option. I suggest you choose "Take no action" and keep the "do this every time" option on; that means it won't autostart any application.
You can also download the TweakUI application for WinXP from Microsoft and use it to change your player's autostart options.

I've installed the latest version of itunes but every time i try to run it i get to the eula and then it won't actually start

I'm running windows 7 sp1 and every time I try to run windows I can get to the EULA, which I agree to, and then it doesn't do anything. Nothing in task manager or anything. It used to run, but then it started to give me an error saying that I didn't have proper permission to access the disc it's on, and then I went through a **** of a time getting the program to reinstall, but now it just won't even start at all. frustrating.

* http://kb.mozillazine.org/Software_Update (Software Update not working properly)
It shouldn't be necessary to reboot the computer to complete an update.<br />
Download a fresh copy of Firefox ([http://www.mozilla.com/firefox/all.html]) and do a reinstall of Firefox on top of the current version.<br />
You may need to do a clean install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

Error in Setting Auto Start for Oracle DB on Sun Solaris 10

Hi Gurus,
I am trying to set my DB to auto start when server reboots. Fllowing is my setting and the error. The issue is that the DB starts but LISTENER is not running...
Please please help me...
This is what I used for setting the auto start.
Thanks,
Jayant
SETTING:
=======
#!/sbin/sh
#Match ORACLE_HOME with whatever is in ~oracle/.profile!!!
ORACLE_HOME=<whatever is Orcale home is>
case $1 in
start)
su - oracle -c $ORACLE_HOME/bin/dbstart
su - oracle -c "$ORACLE_HOME/bin/lsnrctl start"
exit 0
stop)
su - oracle -c "$ORACLE_HOME/bin/lsnrctl stop"
su - oracle -c $ORACLE_HOME/bin/dbshut
esac
You're not done yet! You now have to dl
ln -s ../init.d/oracle /etc/rc3.d/S95oracle
ln -s ../init.d/oracle /etc/rc0.d/K15oracle
chmod 0755 /etc/init.d/oracle
ERROR:
======
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 02-DEC-2006 10:09:24
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Message 1070 not found; No message file for product=network, facility=TNSTNS-12545: Message 12545 not found; No message file for product=network, facility=TNS
TNS-12560: Message 12560 not found; No message file for product=network, facility=TNS
TNS-00515: Message 515 not found; No message file for product=network, facility=TNS
Solaris Error: 2: No such file or directory
root@zngds1gk #

Bingo.... I got it.
Thanks for your hint about the ./.profile. I was setting env variables in .cshrc file and my default shell for "oracle" user was sh.
Then I changed the default shell for oracle user to csh and viola..... it works.
root@zngds1gk # su - oracle
$ id
uid=100(oracle) gid=101(dba)
$ setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/sh
$ exit
root@zngds1gk # usermod -u 100 -s /bin/csh oracle
root@zngds1gk # su - oracle
zngds1gk%
zngds1gk% setenv
HOME=/space/oracle
PATH=/space/oracle/app/oracle/product/10.2.0/Db_2/bin:/usr/bin:
LOGNAME=oracle
HZ=100
TERM=xterm
SHELL=/bin/csh
zngds1gk% cat .cshrc
umask 022
setenv ORACLE_BASE /space/oracle/app/oracle
setenv ORACLE_SID adm
setenv DISPLAY 47.102.212.108:0.0
setenv ORACLE_HOME /space/oracle/app/oracle/product/10.2.0/Db_2
setenv PATH /space/oracle/app/oracle/product/10.2.0/Db_2/bin:$PATH
And now it works...
Thanks.
~Jayant

How to switch off auto start of replication sp's.

hi,
I was checking my sqlserver's master database and found some body has swithched on auto start
of the following sps.
sp_MScleanupmergepublisher
sp_MSrepl_startup
May be some one was exprerimenting with replication.
pls tel me how can i switch them off?
i was hesitating to use this command
"sp_procoption 'spname', 'startup','off'"
, because i thought some on might have configured some thing else also for replication
or there might be some other way to swithch of these replication sp.
yours sincerely

You dont want to stop these.
These are automatically started when SQL Server starts provided you have replication configured.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com

Virtual keyboard auto starts in Windows 8.1 Pro

Even if the toolbar is turned off and the toolbar is locked, and under ease of use the checkbox is unchecked, this pesky icon keeps coming back. Is there a registry fix... users are complaining. thx!
Jiggy Gaton, Trainer and Media Consultant for Nepal and S. Asia

Hi,
Please know that it’s powered by a windows service called Touch keyboard and handwriting
pane. Stopping this service will be in result of disabling the on-screen keyboard.
Let’s try to disable the service related to the touch keyboard:
1. Press Win+R, type “services.msc“, and press Enter to bring up Services window.
2. Scroll down a bit until locate the service called Touch keyboard …
3. Double click it, first to stop it if it’s running, and then change the Startup type to either Manual or Disable to prevent it from auto-starting next time when computer starts.
Hope these could be helpful.
Kate Li
TechNet Community Support

Auto start LR on camera connect?

Hi
When using Bridge it would auto-start when I connected my camera to my Mac, LR doesn't seem to follow this behaviour. It will open the import dialogue if LR is already running when I connect the camera. Is this normal behaviour?
Secondly, I can't find an option to delete files from the camera after importing them to LR as there is in Bridge, have I missed it or is it not there?
Thanks

Configure in ImageCapture under Applications and check 'Show import dialog when a memory card is detected' under Import in Preferences.
Don
Don Ricklin, MacBook 2Ghz Duo 2 Core running 10.5.1 & Win XP, Pentax *ist D See LR Links list at http://donricklin.blogspot.com for related sites.

How to stop the auto-start of log reader agent (replication) right after my database is restored?

I have the scenario where the SQL server is restored (after migration).
This database has transactional replication set-up on one of the databases. When I do a manual delete and restore of the database, I see that the replication starts right after the publisher and subscriber are restored.
Replication agents should not start and run before the integrity checks are completed. How to stop the replication from auto starting right after the migration?
Thanks in advance - Jebah

Thanks Pradyothana, I have disabled the logreader, distribution agents through sp_update_job in Tsql script. I have also verified that there are no pending transactions to be replicated to the subscriber, I see that the job is still being executed. Is there
any other way to disable the jobs?
Steps I followed
Started with a Working publication and subscription
Disabled the jobs (log reader and distribution agents)
Backed up publisher, subscriber, distribution and msdb
Deleted the publication, subscription, publisher and subscriber
Restored the publisher, subscriber, distribution and msdb
Enabled the jobs and executed sp_replrestart
Observations/Issues
Replication does not work
Replication monitor does not show any error
Jobs are shows as enabled but not started in job monitor
Not able to start/stop the log reader and synchronization manually.
I am not sure if I have missed something while restoring the db.
Thanks in advance

I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have-I guess I can auto start the DVD but would prefer a button-how and where would I put this "play all" marker??

I want to create a "Play All" chapter marker that will play the video from start to finish in addition to the standard chapters I have…I guess I can auto start the DVD but would prefer a button…how and where would I put this "play all" marker?? Thanks..

The start chapter button is a play the whole movie button regardless of how many other markers you have.
Once a DVD starts playing it continues to the end.
Chapters marker simply gives the viewer a place to start playback whether it be the start, middle or near the end.
Al

MiniDLNA won't auto start

Similar Messages

Maybe you are looking for