MiniDV camcorder via USB not recognized in iMovie

I have the camcorder plugged in (power), and connected to the 24" iMac via USB, but iMovie or Mac can't see it. Any suggestions??

The only way to access the "Tape" content from a MiniDV camcorder is thru the "Firewire" port.
The USB is only used for pictures stored in the Memory card.

Similar Messages

  • Scanner/Camera via USB not recognized under 10.8

    Hi there,
    after installing 10.8 on my 2011 iMac, neither my Lexmark Scanner nor my Camera are recognized via the USB-port by Image capture or iPhoto respectively; no matter if connected via USB-hub or directly to the iMac.
    Odd enough, sending faxes or printing with the Lexmark works perfectly allright over the very same USB-connection, as well as p.e. dongles are recognized.
    Needless to mention, with 10.7.4 everything went just fine; I updated the Lexmark drivers, I repaired permissions after the first install of 10.8 and even did a second install in the meantime - same prob!
    Any ideas???
    THANKS and a wonderful weekend for You all...

    So, as there was no help anywhere, neither from the guys at Lexmark nor here, I knew no better than to downgrade again to 10.7.4 (using TimeMachine) and: immediately the prob was solved, the scanner as well as the camera work just fine... odd thing, all the more as I seem to be the only one having this strange USB-bug...

  • SONY HDR XR150 - Camcorder is not recognized by iMOVIE

    Dear all:
    _I own the Sony HDR XR150 camcorder and cannot get my MAC to recognize that my camcorder is connected._
    I have a Mac laptop Powerbook G4 and am running OS X version 10.4.11. I have iMOVIE 6.03 (267.2).
    When I am in iMOVIE the camcorder is not recognized. :[
    It states "No camcorder attached" even when I have small Firewire cable running from camcorder to larger firewire cable plugged into MAC. My footage on camcorder is on hard drive. I have no idea if the footage was taped in a certain format and I mention this because there are lots of formats written about in this forum - I just assumed everything was recorderd in HD. I simply hit record on camcorder to tape footage. When connected, I click on a button on camcorder for USB connect that uses the Internal Hard Drive (where my footage is). However, my camcorder is not recognized on iMOVIE.
    I am worried that the problem is I do not have an Intel based Mac. The software that came with Sony camcorder called PMB (Picture Motion Browser - only works with Windows.)
    This is what I dug up online.
    Tapeless Camcorder Support
    iMovie '09 works with many tapeless camcorders that record to flash memory, a hard disk drive (HDD), or DVD media. These devices use a USB 2.0 cable and include camcorders using MPEG-2 (standard definition), MPEG-4, AVCHD, and H.264 formats. If you use the AVCHD format you will need a Mac with an Intel-based Core Duo processor or better.
    Due to the wide range of media types, and the different ways manufacturers store video on these media types, not all tapeless camcorders are compatible with iMovie '09.
    NTSC Camcorders
    PAL Camcorders
    http://support.apple.com/kb/ht3290
    *CAN ANYONE CLUE ME IN AS TO HOW TO GET MY SONY CAMCORDER TO BE RECOGNIZED IN IMOVIE?*

    My friend just wrote this to me as a possible solution...
    It doesn't surprise me that AVCHD is only supported on Intel machines. Apple tends to stop updating older products/software in favor of their newer lines. To their credit, high compression HD codecs are processor intensive, and older hardware would have a hard time with it.
    The camera may have some alternate options for video file type... Check the manual or help docs. Unfortunately, that could mean SD recording rather than HD.
    I DON'T KNOW IF MY FRIEND'S INFORMATION MIGHT HELP SOMEONE GIVE ME SOME EVEN BETTER IDEAS AS A SUGGESTION. AVCHD is a high-def video format that allows HD camcorders and some digital cameras to record video at resolutions up to 1920 x 1080. SOUNDS LIKE MY FRIEND IS SAYING IF I DON'T RECORD IN HD ON MY SONY CAMCORDER MAYBE MY IMOVIE WILL BE COMPATIBLE WITH IT. BUT MY IMOVIE DOES NOT EVEN RECOGNIZE MY CAMCORDER... SO I DON;T THINK HIS SUGGESTION WILL WORK...
    SUGGESTIONS?

  • Minidv camcorder with USB

    Hi,
    the new macbook has no firewire so i ask if there is any minidv camcorder with usb for importing video in iMovie 08?
    It should be a minidv camcorder.
    Michael

    Thats not the problem. I have several macs with firewire.
    The problem is that i have an 9 year old canon dv camcorder and for this certainly several tapes stored.
    So i'm looking for a camcorder with tapes and HD .
    My son, who also does some video editing on his macbook (2,16 with firewire) wants a new macbook witch has no firewire.
    I know that i can import the video on my macbook pro, copy it to an external drive, connect that to the macbook. Fine, but you know how much time this will take.
    Therefore my question for an hdv camcorder with USB video import.
    I hope the manufactuers will come out with such a camcorder.
    Michael

  • Since upgrading to 10.8 my iMac can't see video files to copy across in Finder when connecting my AVCHD camcorder via USB

    Hi, I usually connect my Panasonic AVCHD Camcorder via USB to copy the .MTS files across to my iMac for editing. Since upgrading to Mountain Lion, Finder sees the directories for photos stored on the Camcorder but not the video directories/files. I can see them via Parallels. Any ideas why?
    Thanks, Julian

    ML will show the AVCHD as a pkg, so you are not able view the directories like BDMV-->Stream-->MTS. You can right click AVCHD file, then choose show package contents. you will see BDMV, then you right click BDMV to choose show package, you will see stream folder, just do it again, you will find MTS files. Next time if you want to check the MTS files you just need to do above again. right click AVCHD....
    Another way, rename AVCHD to AVCHD.mts then do it same with BDMV and Stream folder, it will let you see MTS files after that. Those mts files will keep showing on your mac next time.
    Hope it helps

  • My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

    yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have  any drivers
    its driving me round the bend at the minute

  • Can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized itried all the tips like reboot and restore plshelp me thanks

    can any one help me to fix my ipod touch it wont recognized by my laptop and itunes its said usb not recognized its freeze iin display usb and itunes logo pls help me pls itried all the uninstall unknown device and reboot the ipod and restore pls help me thanks

    Try the suggestions found here: http://www.apple.com/support/ipodtouch/assistant/itunes/

  • IPhone is not appearing in iTunes 12, USB not recognized by Windows 8.1

    S.O.S
    My iPhone 5s is not appearing in iTunes 12.
    Windows 8.1 says "USB Not Recognized".
    iPhone not appearing in iTunes 12 on iMac and MacBook Pro as well
    iPhone can charge with no problem.
    Try different cables and same problem nothing changed.
    I had tried;
    Reset and Restart iPhone.
    Cleaned the charging input.
    Tried in 3 different computers.
    I can't perform the method like uninstall/reinstall the USB driver on my Windows because in my Windows the USB showed unrecognized instead of "Apple USB/iPhone USB" on Device Manager.
    P L E A S E    A D V I S E

    Hi Since ios 7 almost everything can be dropped over your WiFi When you charge your phone if Automatically backs up to iCloud If you have problems backup to iCloud over your WiFi Then Restore iPhone back to Factory Settings Use same Apple ID Then you will get all your apps & data back. We have 2 iPhones & 3ipads & have not used a pc for over a year with them. Cheers Brian

  • External USB not recognized on my iMac (intel) in Disk Utility, Finder as well as in Terminal diskutil list but is listed in System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore USB identity ?

    My 1TB Seagate external USB not recognized by my iMac (intel) in Disk Utility, nor in Finder as well as in Terminal "diskutil list" but it is listed within the System Profile, which includes the location ID of 0xfa400000 / 5.  Can the location ID be used to restore the identity of my external USB ?

    Hello JNotorious,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/ht1151
    Have a nice day,
    Mario

  • USB not recognized from my ipod touch 2nd gen on any of computers.

    USB not recognized from my ipod touch 2nd gen on any of computers.

    Just what are you doing where?
    Are you trying to sign into Settings>iTunes and App Store?

  • Have reinstalled ITunes correctly-after USB not recognized for new Shuffle

    New Shuffle- 1st time it says USB not recognized- Apple sends me info to uninstall and re-install I-Tunes- I-Phone is still seen- try Shuffle- first message says USB port recognized- next one says something about hardware not being installed properly. Try again and am back to the original problem- USB not recognized. Of course Apple Support is now closed- any ideas?

    DId you uninstall iTunes and all it's components? Or just the iTunes program?  Apple Mobile Device would be the main cause more than likely. So it is important whether you uninstalled all the programs or just iTunes. If so what I would try next is putting the device into recovery mode and seeing if it detects it like that.

  • My Ipod Touch when I try to connect to ANY computer with ANY USB cable I get "USB Not Recognized" Other Ipod devices work with ALL computers and ALL USB cables PLEASE HELP!!!

    I am using an IPod Touch 3. I get the error message USB Not Recognized. Now I have tried three different USB Cables and three different computers...... Same error message. My daughters IPod Touch 4 works perfectly with all of those USB Cables and computers, so this is not a USB problem or a computer problem. It must be something with my IPod Touch 3. Every article I go to wants me to look at stuff on the computer but how could that make sense if other IPod Devices work fine? Please. Any information would be greatly appreciated.

    You need to provide more information about your network. What frequency does it use (2.4ghz or 5.0ghz), which wireless protocol (a, b, g, b/g compatibility, n), and what security are you using (WEP, WPA2, etc.)?
    Please also provide more information about your iPod Touch. Which model is it, and which version of the iOS are you running on it?

  • I have got an iphone 4 and i have plugged it into my windows 8 laptop and a message pops up on the laptop saying usb not recognized, what do i have to do to make my laptop recognize my phone?

    i have got an iphone 4 and i have plugged it into my windows 8 laptop using the usb cable, and a message pops up on the laptop saying usb not recognized, the iphone doesnt say its charging or anything, how do i get my laptop to recognize my phone?

    Start here:
    http://support.apple.com/kb/TS1538

  • HT1923 USB not recognized! HELP URGENT

    Heyy Everyone!
    I really need help!! Okay so this is the case I connected my iPod touch to the laptop Sony Vaio, and this is the first time it ever happened it says USB not recognized, doesnt open itunes or anything, yes I searched and searched did everything nothing worked please if you know how to fix this.. I tried it on couple more laptops/computers still the same any idea what could caused the problem, i used it like couple of times and left it for a month-ish oh and its 22,321,272 minutes locked and I really want to restore but really cant desprately need help

    ok, Im sorry to update this thread again but I fixed one issue and made another...
    So on another thread I read that sometimes the issue is fixed from shutting down the computer and actually unplugging it from the wall. I did that and at restart it worked! It prompted me to restore my settings and it went through and works fine now. HOWEVER... my apps are gone! I did a backup on itunes today that it loaded, but the apps are not there.... what happened?? Please tell me they are not lost.....

  • My iTouch says USB Not Recognized?

    I plug my 2gen iPod Touch into my comptuer and almost immediatly it says USB Not Recognized. But, when I plug it in with the newest cords it shows up just fine. Is my cord out of date? Is the one with the button release. I don't see how a cord would affect it showing up on the computer.. But it does. HELP!

    I had success with the holding down the keys and connecting to usb and using itunes to restore firmware like they show here
    http://support.apple.com/kb/HT1808
    the showing the usb thingy on the screen part

Maybe you are looking for

  • How to change the font in a text field?

    I am trying to recreate a file like this: http://www.teacherspayteachers.com/Product/Thank-You-Cards-for-Volunteers-Freebie-Editable Customizable-696763 I originally created the file in Powerpoint, saved as a PDF, brought it into Adobe Pro XI for Mac

  • I seem to be having trouble sending a PDF edited document as an email attachment?

    IT seems to send but then never arrives.  Im using trial version of Adobe Acrobat Pro XI.

  • Comment in Unix shell script

    i have a doubt as to how to comment a line in a shell script as i have to do that in a config. file of Oracle 9i Application Server. Is it a "--" in a line. Please help. regards

  • Bdc programing

    Hi, i am new to bdc.in my req.. they asked me to change bapi function module and i want replace with bdc. i want to do recording for ME21n or ME21 Tcode and bdc Session method.plz let me know the process by step by step.if any one have code for this

  • ClassLoading in plugin architecture

    I'm developing a Java Desktop Application with a plugin architecture. I'd like to know of any good resources for information on how to use ClassLoaders to implement different schemes of plugin isolation and sharing. Examples: Sharing Each plugin depe