Minimized address/numbers for a group

I sync my phone with a group from my address book app. However, I don't need all the phone numbers in the address book for each person synced into my phone. Is there a way to create a group that excludes info from the main entry.

I know how to make and sync groups. The problem is the groups are made of selected entries from the main book that have several phone numbers for each person. I only need a few of them for each in my phone. However I can't find a way to limit the info that is to be synced to the phone. Is that more clear? Thanks for your response.

Similar Messages

Reset Page Numbers for each group with XMLP 4.5

I am currently working on the invoice report rtf template using XMLP 4.5
We cannot upgrade to new version at this stage.
Our requirement is, i want to reset the page numbers for each invoice. I know that it can be achieved using @section. I think this will work only XMLP 5.0 and after. Is there any other way to achive this requirement?
Our reports are moving to production in another 3 days.
I would be thankful If anybody can provide me the solution for this problem?
Thanks
Babu

Hi Tim
Thank you very much for your suggestion. We have upgraded to latest version of XML and now i am using @section to reset the page numbers for each invoice. This is working fine. But i have stucked to print the invoice copes for which page numbers should be reset.
As per the client requirement i need to generate the invoice report with 3 more copies where COPY word will be there for duplicate invoice copies.
I have written the rtf template logic like below:
ex: <?for-each@section:G_INVOICE?>
Invoice Information
Invoice first copy information with COPY word (just copy the above original invoice layout and pasted)
Invoice second copy information
Invoice third copy information
<?end for-each?>
This is working fine. But client is demanding that all the invoice copies page numbers should start with 1. I tried by giving the @section for each invoice copy. But it was not working. Is there anyway to reset the page numbers for each invoice copy (anyway orginal invoice page numbers are resetting becuase i have used @section). It would be great help for me by providing the solution for my problem.
Thanks
Babu

Numbering for Questions in WPC FAQ component

Hi,
I succesfully implemented the FAQ component. I need to give numbering to the questions.
P.S the questions are grouped based on the header. So, I have to give numbering for each group.
I tried <xsl:number> in the XSL, but I am not able to group the Questions alone. If anybody did this, please help.
Thanks in Advance,
JK

Hi,
try <xsl:number level="multiple" count="item">
Additionally use the parameter : format="1.1.1.1" this can have other values....
Just search in Google for <xsl:number>
Regards,
Kai

The iPad doesn't seem to want to set up an email for a "group" in my contacts. On my iMac, when I type the name of a group, the email addresses of everyone in the group appear in the "To" line of a new message. Not so with the iPad. Help?

The iPad doesn't seem to want to set up an email for a "group" in my Contacts. When I type the name of a group in the "To:" line of a new message on my iMac, all the email addresses of the group automatically appear. Not so with my iPad. Help?

Apparently Groups are not supported in the Mail App on the iPad. Read this thread and see Michael Morgan's post for a workaround.
https://discussions.apple.com/message/13084823#13084823

Please enter at most 70 letters or numbers for street address, i am facing this issue with that i am unable to downloads few apps, as it is asking for this question and again and again,

please enter at most 70 letters or numbers for street address, i am facing this issue with that i am unable to downloads few apps, as it is asking for this question and again and again,
i tried all letters and address more 100 hundred also nut no of use,

please enter at most 70 letters or numbers for street address, i am facing this issue with that i am unable to downloads few apps, as it is asking for this question and again and again,
i tried all letters and address more 100 hundred also nut no of use,

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when i select the customer?

I have created a spreadsheet on numbers for ipad with a list of customers as a drop down menu. How can i make their address appear underneath when I select the customer?
iselect the customer?

Hi bazza,
We won't be able to put the address from a formula into the same cell that you enter the customer's name. We can put the address in the cell under the customers name.
First let's take James advice and concatenate the address in the address table.
Here is the formula in G2
=CONCATENATE(B2&"
",C2&"
",D2&"
",E2)
It shows this way because after I clicked on B2 and typed [&"] (no brackets) I typed option-return
This gives you your new line. Then I typed the closing ". I repeated this for the rest of the address.
Next we want to bring this to your order sheet. I prefer using the two formulas OFFSET and MATCH instead of VLOOKUP.
base tells OFFSETwhere to start counting from. Click A1.
row-offset is for the row. we will use MATCH() -1 to give us the row.
What MATCH does is give you the row number where something is found and you can specify an exact match. I usually construct the MATCH formula first and then cut and paste it into OFFSET. MATCH looks like this: MATCH(A2,Table 1::A,0). A2 is what we are looking for, Table 1A::A is where we are looking (the entire column A), and 0 means we want an exact match. Can you see it inside the OFFSET formula? Notice that we had to subtract 1 from its result.
column-offset tells OFFSET which column A=0 so we want 6.
we ignore "rows", "colomns" we don't need them.
If this seems like too much, just break it down into small pieces.
quinn

Using numbers for roster information. Imported from another program. Now seem to have extra headers, one listing name, address, etc.

Using numbers for roster information. Imported from another program. Now seem to have extra headers, one listing name, address, etc. & another A, B, C. They don't mesh & can't get rid of either. All info there, but can't change width of columns.

I think my problem is that I have inadvertently created three tables (I only want one). I have included a screen shot of the light grey line under B and the words Table 1 behind it.

Smart Groups possible in Address Book for PANTHER?

Can you tell me if "SMART GROUPS" is just something in TIGER's version of ADDRESS BOOK or do these exist in PANTHER as well? Actually, I'm not sure what they are, but someone mentioned that I should use them...
Thanks very much!
Regards,
Steve

Steve,
"Smart Groups" are not available in Panther. This is the Tiger definition of Address Book Smart Groups: Smart Groups are group addresses that Address Book automatically updates with new contacts when they fit the criteria you've specified for that group. For example, if you create a Smart Group for all the members of your swim club by searching for "swim" in the Note field, then every time you add or change a contact and put "swim" in the Note field, that contact is automatically added to your swim club Smart Group.
You can also create a Smart Group by entering a word or phrase in the search field in the upper-right corner of the Address Book window, then choosing "Save Search" from the Action pop-up menu near the upper-left corner of the Address Book window.;~)

How do you record addresses for a group in contacts?

How do you record addresses for a group in contacts?

You can't create groups in the contacts app and even if you create a group in icloud.com, the group is useless for email purposes on the iPad. At least I have never been able to get the groups that I create in icloud.com to appears as options for emailing.
There are third party apps that will let you do this.
MailShot
http://solubleapps.com/mailshot/
Group Email with Attachments
http://www.redbits.com/iphone/groupemail/
There is also a workaround where you type all of the email addresses that you want to create a group for in the Notes app separated by a comma,between each address. Copy and paste that one long "email address" in the contacts app and name it whatever you like. Select that as your group when you want to send the group email.
I Haven't done the workaround in ages, so experiment with it first. You may need to leave a space after the comma before you start trying the next email address.

HT2486 How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the group I want to send to.

How do I remove the grey "contact" selection highlight? This contact always appears as the email address for the address book group I want to send to.

The group is "undisclosed" there are 6 contacts in the group. The contacts are listed in 2nd column entitled "name", one of these contacts remains highlighted or selected in grey. I can't remove the grey selection of the contact. When you select the "undisclosed" group as the "to" address the contact highlighted in grey appears in the email address box. The group name should appear in the email box, but it doesn't. This began to happen after I upgraded to IOS 10.6.8. However I'm not sure that has anything to do with the problem? I do not have "show all member addresses selected." Your help is appreciated.

Question about using numbers for an address spread sheet

I am using numbers for a mailing address spread sheet. When I try to type in a Massachusetts zip code, once I hit "enter" the cell deletes the zero, which is the first number in the zip code. How can I change this? Thank you

to open the cell inspector use the menu item "View > Show Inspector" then select the "cells":

How to create an action to insert hundreds of different numbers for limited edition prints?

Hi,
I sell limited edition prints of a run of between 350 and 500.
I am trying to get it set up so that my signature and the print number is included as part of the print. Here is an example:
You'll see at bottom left there is my signature and underneath is is the print number e.g. 110/350 (this is legible when printed at 18x12" size).
Inserting the signature and the "/350" is easy since it only needs to be done once per image.
The difficulty comes with inserting the actual print number e.g. "110"
At the moment I have 0 to 9 written out and scanned in as separate numbers. So to make "110" I use the "1" digit twice, plus the "0" digit. I.e. I haven't written out 1 to 500 and scanned them in all as separate numbers, I've just done the 10 digits and use those 10 digits to make all the different numbers I need.
Is there a way to create an action that will create say 350 JPEG copies of the original file, each one with its own unique print number inserted? (And ideally automatically saved with the print number as its file name!)
Many thanks in advance

This Script might be able to do some of what you wanted (the startNumber and endNumber would have to be set in the Script).
It needs a Layer Group named »numbers« to contain layers for the numbers named »0«, »1«, …
(script edited)
// this script saves jpg copies with numbers created from number-layers in a layer group;
// use it at your own risk;
#target photoshop;
if (app.documents.length > 0) {
// define the numbers to create;
var startNumber = 290;
var endNumber = 310;
// set to pixels;
var originalRulerUnits = app.preferences.rulerUnits;
app.preferences.rulerUnits = Units.PIXELS;
// get doc;
var myDocument = app.activeDocument;
// getting the name and location;
var docName = myDocument.name;
var baseName = docName.match(/(.*)\.[^\.]+$/)[1];
//getting the location;
var docPath = myDocument.path;
// duplicate the image;
var thecopy = myDocument.duplicate (thecopy, false);
// jpg options;
var jpgopts = new JPEGSaveOptions();
jpgopts.embedProfile = true;
jpgopts.formatOptions = FormatOptions.STANDARDBASELINE;
jpgopts.matte = MatteType.NONE;
jpgopts.quality = 9;
// get number layers;
var numberSet = thecopy.layers.getByName("numbers");
// collect in an array;
var theNumbers = [numberSet.layers.getByName("0"), numberSet.layers.getByName("1"), numberSet.layers.getByName("2"),
numberSet.layers.getByName("3"), numberSet.layers.getByName("4"), numberSet.layers.getByName("5"),
numberSet.layers.getByName("6"), numberSet.layers.getByName("7"), numberSet.layers.getByName("8"), numberSet.layers.getByName("9")];
numberSet.visible = true;
// proceed if all numbers have been found;
if (theNumbers.length == 10) {
// hide layers;
for (var n = 0; n < numberSet.layers.length; n++) {
numberSet.layers[n].visible = false
var theState = thecopy.activeHistoryState;
// process the numbers;
for (var m = startNumber; m < endNumber + 1; m++) {
// the position;
var theHor = 500;
// create an array for the new numbers;
var theArray = new Array;
// the number;
var thisString = String(m);
// duplicate layers to create the numbers;
for (var o = 0; o < thisString.length; o++) {
var theNumberLayer = theNumbers[Number(thisString[o])];
// create copy;
var theLayer = duplicateMoveRotateScale (theNumberLayer, theHor - Number(theNumberLayer.bounds[0]), 0, 100, 100, 0);
theNumberLayer.visible = false;
//alert (m+"_"+o+"\n"+theNumberLayer+"\n"+theLayer);
// set the hor to edge of the new layer;
var theHor = theLayer.bounds[2];
theArray.push(theLayer);
// get the number for the file name;
var theNumber = bufferNumberWithZeros(m, String(endNumber).length);
//save jpg;
thecopy.saveAs((new File(docPath+"/"+baseName+"_"+theNumber+".jpg")),jpgopts,true);
// remove copied layers;
//for (var p = theArray.length - 1; p >= 0; p--) {theArray[p].remove()};
thecopy.activeHistoryState = theState;
// close copy;
thecopy.close(SaveOptions.DONOTSAVECHANGES);
// reset ruler;
app.preferences.rulerUnits = originalRulerUnits
//that’s it; thanks to xbytor;
////// buffer number with zeros //////
function bufferNumberWithZeros (number, places) {
          var theNumberString = String(number);
          for (var o = 0; o < (places - String(number).length); o++) {
                    theNumberString = String("0" + theNumberString)
          return theNumberString
////// duplicate layer and move, rotate and scale it //////
function duplicateMoveRotateScale (theLayer, theX, theY, theScaleX, theScaleY, theRotation) {
app.activeDocument.activeLayer = theLayer;
try{
// =======================================================
var idTrnf = charIDToTypeID( "Trnf" );
    var desc10 = new ActionDescriptor();
    var idnull = charIDToTypeID( "null" );
        var ref6 = new ActionReference();
        var idLyr = charIDToTypeID( "Lyr " );
        var idOrdn = charIDToTypeID( "Ordn" );
        var idTrgt = charIDToTypeID( "Trgt" );
        ref6.putEnumerated( idLyr, idOrdn, idTrgt );
    desc10.putReference( idnull, ref6 );
    var idFTcs = charIDToTypeID( "FTcs" );
    var idQCSt = charIDToTypeID( "QCSt" );
    var idQcsa = charIDToTypeID( "Qcsa" );
    desc10.putEnumerated( idFTcs, idQCSt, idQcsa );
    var idOfst = charIDToTypeID( "Ofst" );
        var desc11 = new ActionDescriptor();
        var idHrzn = charIDToTypeID( "Hrzn" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc11.putUnitDouble( idHrzn, idPxl, theX );
        var idVrtc = charIDToTypeID( "Vrtc" );
        var idPxl = charIDToTypeID( "#Pxl" );
        desc11.putUnitDouble( idVrtc, idPxl, theY );
    var idOfst = charIDToTypeID( "Ofst" );
    desc10.putObject( idOfst, idOfst, desc11 );
    var idWdth = charIDToTypeID( "Wdth" );
    var idPrc = charIDToTypeID( "#Prc" );
    desc10.putUnitDouble( idWdth, idPrc, theScaleX );
    var idHght = charIDToTypeID( "Hght" );
    var idPrc = charIDToTypeID( "#Prc" );
    desc10.putUnitDouble( idHght, idPrc, theScaleY );
    var idAngl = charIDToTypeID( "Angl" );
    var idAng = charIDToTypeID( "#Ang" );
    desc10.putUnitDouble( idAngl, idAng, theRotation );
    var idIntr = charIDToTypeID( "Intr" );
    var idIntp = charIDToTypeID( "Intp" );
    var idbicubicAutomatic = stringIDToTypeID( "bicubicAutomatic" );
    desc10.putEnumerated( idIntr, idIntp, idbicubicAutomatic );
    var idCpy = charIDToTypeID( "Cpy " );
    desc10.putBoolean( idCpy, true );
executeAction( idTrnf, desc10, DialogModes.NO );
return app.activeDocument.activeLayer
} catch (e) {}
Edit: This Script just uses the layers’ horizontal bounds for orientation, so it does not address the issue I referred to earlier reagrding aesthetically pleasing spacing of the elements.

How do I revise print format for a group

I'm trying to print a club roster and I can find no way to revise the layout that keeps the phone numbers from being split onto two lines. I find it irritating that I have to go to iCloud to even get it in a an alpha sort, then lack of formating becomes a bigger issue. I can't even find a way to export the whole file to a program that will allow me to maximize the data on the page.
Hopefully I'm just missing the necessarey info and there is a way to do this. I've used Address Book for many years and don't recall having an issue like this. Did the switch to Contacts create the problem? I hope it's just me.

Ms. Linda, it is not just you. I can print my groups in Pocket Address Book and get an alphabetical listing, but the format is bad and cannot be adjusted. Like you I hope Apple fixes this soon. Larry

NATing to the virtual MAC address of an HSRP group problems...

Hello
I have a problem where I need to NAT various IP addresses, and need the NATd addresses to carry the virtual MAC address of the HSRP group on the onward travels..
By default, with the Cisco 871's I'm using, the packets are NATd, but carry the MAC address of the external interface.. not the virtual MAC address.
The problem is that when I failover to the standby 871, the packets will then have the MAC address of the standby (new active) 871. This causes problems because my next hop doesn't update its ARP tables (very infrequent updates).
The next hop will accept packets NATd by the standby (now live), but will continue to send reply (eg ICMP) to the live (now standby) because it hasn't updated its ARP table.
I know that I can create a NAT pool with the virtual IP address as the only member of the pool. Packets will then have the virtual MAC address, and the problem will be fixed, but if I need to NAT IP addresses to *different* NATd addresses, then I would have to create multiple HSRP groups, with different virtual IP's and MAC's, and then create multiple NAT pools...
If I can't get my next hop (which I have minimal control over) to refresh/update it's ARP table, then I will consider the multiple HSRP group config, but before I try that I would like to know whether I would be able to have multiple virtual IP's and MAC's on a single interface. Apparently there was a problem with the Catalyst 2500/4500 series where the same MAC address would be used for all HSRP groups, and you had to use burned-in MAC addresses for HSRP groups.. which wouldn't provide a solution in this case..
Any ideas on how to fix this would be greatly appreciated. BTW I have proxy-arp on external interface, and gratuitous arp.
My software version is:
Cisco IOS Software, C870 Software (C870-ADVSECURITYK9-M), Version 12.3(8)YI1, RELEASE SOFTWARE (fc1)
Synched to technology version 12.3(10.3)T2
Many thanks,
Michael Blake.

Hello Michael,
you might want to have a look at the documents below, describing two techniques developed for the problem of NAT in an HSRP environement:
NAT Stateful Failover of Network Address Translation.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t13/ftsnat.htm
NAT Static Mapping Support with HSRP for High Availability
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t4/ftnthsrp.htm
Regards,
GP

Using If condition in For EACH Group

Hi all,
I want to use if condition in for-each-group. Basically my requirement is that i want to use dynamic grouping. There will be two groups and the upper group and lower group will be selected on the basis of a report parameter.
I hope i made it clear enough. So please help me in this. Any ideas will be highly appreciable.
Thanks and regards
Naveed

You can add a If condition filed after the for-each field
for EG : <?if:ADDRESS_TYPE = 'Employee Address'?>
and then add anothet field which has <?end if?>
Hope this helps.
Thanks,

Minimized address/numbers for a group

Similar Messages

Maybe you are looking for