Minimizing Solaris packages and size when running Sunray

Hello All,
Does anybody have knowledge concerning the smallest Solaris install that will support Sunray Server software? The default install is way too large as I am testing different customer setups under vmware (this makes it easy when you are limited in the amount of HW you have to test with) and would like to conserve my disk space. It would also benefit the customer in the long run as they get a smaller (and possibly faster with less daemons) install when finally implemented directly.
I would like to start with a disk install and the "END USER" config (if possible) and subtract packages from there. Then after testing move on to a jumpstart with package delete keywords. If someone has done this exercise before your insight would be appreciated.
Regards,
Tucker

It turned out to be my switch. I tried setting the speed and media type manually, using ndd, spanning 100/full down to 20/half, nothing worked. The instant I connected the Solaris box directly to the upstream link the problem went away. I also seem to have problems with a Linksys VPN router attached to this switch. So I guess I need a new switch, perhaps a managed switch is more in order.

Similar Messages

What Solaris packages are needed to run WebLogic 5.1?

Solaris by default comes with 4 installation methods, namely core, end-user,
developer, full. In comparison, full consists of 300+ solaris packages and
core about 30+. I was wondering if there are any docs lying around on
specifcally what packages are required of Solaris 2.6 by Weblogic 5.1. Would
greatly appreciate any help here. Thx
Rgrds,
Wong.

Acckk a full installation is bad... real bad for security in a production
env. You guys should investigate thoroughly exactly what packages are needed
to run JVM. There are a lot of useless binaries/libs in a full Solaris
installation. For the record, I installed a core installation + two packages
(required by JDK). The thing works anyhow... but I thought BEA would have
some guidelines on a Solaris installation for host security. I mean, even
M$ have guidelines on running IIS securely, and apache have theirs long ago.
Any of you guys ever tried stripping Solaris to run weblogic??
Rgrds,
Wong.
"Michael Girdley" <[email protected]> wrote in message
news:3988bbd3$[email protected]..
We certify with full installations, but others may work as well. The
ability to run the JVM is the biggest factor.
Thanks,
Michael
Michael Girdley
Product Manager, WebLogic Server & Express
BEA Systems Inc
"C.M. Wong" <[email protected]> wrote in message
news:[email protected]..
Solaris by default comes with 4 installation methods, namely core,end-user,
developer, full. In comparison, full consists of 300+ solaris packages
and
core about 30+. I was wondering if there are any docs lying around on
specifcally what packages are required of Solaris 2.6 by Weblogic 5.1.Would
greatly appreciate any help here. Thx
Rgrds,
Wong.

My jdeveloper11 offten collapse and quit when running, help me!! thanks

my jdeveloper11 offten collapse and quit when running, help me!! thanks

thanks to all.
error info in file hs_err_pid656.txt-------------
# An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d905dc3, pid=656, tid=1788
# Java VM: Java HotSpot(TM) Client VM (10.0-b19 mixed mode windows-x86)
# Problematic frame:
# V [jvm.dll+0x95dc3]
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x03272000): VMThread [stack: 0x03300000,0x03400000] [id=1788]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000008
Registers:
EAX=0x00000008, EBX=0x000000d0, ECX=0x033ffc40, EDX=0x37236024
ESP=0x033ffa04, EBP=0x033ffa98, ESI=0x37236024, EDI=0x033ffc40
EIP=0x6d905dc3, EFLAGS=0x00010283
Top of Stack: (sp=0x033ffa04)
0x033ffa04: 37236020 37235e00 6d902d48 37236024
0x033ffa14: 37236020 00000018 37235e00 37235e90
0x033ffa24: 6d9028fa 033ffa98 37235e00 000000d0
0x033ffa34: 37235e90 37236140 37236140 033ffa98
0x033ffa44: 6d878634 000000ac 033ffa98 37235e00
0x033ffa54: 000000d0 6d9efc4d 37235e90 033ffa98
0x033ffa64: 37235e00 000000d0 37235e00 00c3fe30
0x033ffa74: 37235e00 37236000 6d9efa6b 37235e00
Instructions: (pc=0x6d905dc3)
0x6d905db3: 24 08 8b 06 85 c0 57 8b f9 74 55 3b 47 1c 73 50
0x6d905dc3: 8b 08 83 e1 03 80 f9 03 75 1f 8a 0d dd b5 a7 6d
Stack: [0x03300000,0x03400000], sp=0x033ffa04, free space=1022k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
V [jvm.dll+0x95dc3]
VM_Operation (0x047acb50): GenCollectForAllocation, mode: safepoint, requested by thread 0x03ecc800
--------------- P R O C E S S ---------------
Heap
def new generation total 16960K, used 15660K [0x10030000, 0x11290000, 0x12790000)
eden space 15104K, 100% used [0x10030000, 0x10ef0000, 0x10ef0000)
from space 1856K, 29% used [0x110c0000, 0x1114b040, 0x11290000)
to space 1856K, 0% used [0x10ef0000, 0x10ef24e8, 0x110c0000)
tenured generation total 224120K, used 176661K [0x12790000, 0x2026e000, 0x30030000)
the space 224120K, 78% used [0x12790000, 0x1d4157f8, 0x1d415800, 0x2026e000)
compacting perm gen total 121856K, used 121662K [0x30030000, 0x37730000, 0x40030000)
the space 121856K, 99% used [0x30030000, 0x376ffaf0, 0x376ffc00, 0x37730000)
No shared spaces configured.
VM Arguments:
jvm_args: -Xmx512M -Xms64M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -XX:MaxPermSize=256M -Xbootclasspath/p:../lib/lwawt.jar -Dsun.awt.keepWorkingSetOnMinimize=true -Dide.startingArg0=D:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.exe -Dide.launcherProcessId=656 -Dide.config_pathname=D:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.conf -Dide.startingcwd=D:\Oracle\Middleware\jdeveloper\jdev\bin -Dide.shell.enableFileTypeAssociation=D:\Oracle\Middleware\jdeveloper\jdev\bin\jdev.exe -Dide.pref.dir.base=D:\Documents and Settings\zhang\Application Data -Dide.work.dir.base=E:\zzw_Docs
java_command: <unknown>
Launcher Type: generic
Environment Variables:
JAVA_HOME=D:\Oracle\Middleware\jdk160_05
PATH=D:\app\zhang\product\11.1.0\db_1\bin;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem;D:\Program Files\ATI Technologies\ATI.ACE\;D:\Program Files\Microsoft SQL Server\80\Tools\BINN;D:\Oracle\Middleware\jdk160_05\bin;
USERNAME=zhang
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 14 Stepping 12, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows Server 2003 family Build 3790 Service Pack 2
CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 14 stepping 12, cmov, cx8, fxsr, mmx, sse, sse2, sse3
Memory: 4k page, physical 2095172k(799352k free), swap 4194303k(2743628k free)
vm_info: Java HotSpot(TM) Client VM (10.0-b19) for windows-x86 JRE (1.6.0_05-b13), built on Feb 22 2008 01:16:53 by "java_re" with MS VC++ 7.1
time: Wed Jan 07 20:55:43 2009
elapsed time: 970 seconds

"Use Toolkit Package" and "Gather" - When do you have to run them?

Greetings,
I have inherited a huge task sequence (MDT 2012 integrated with SCCM 2012) that calls "Use Toolkit Package" and "Gather" many many times even though there are only a few reboots.
Is it true that the "Use Toolkit package" step (followed immediately by Gather) only need to be run right at the beginning of the TS and only after every reboot?
Is it also true that the "Gather" step on it's own only needs to be run when you have run another step which may alter/create a variable which is used in the rules? (i.e. customsettings.ini).
Thanks
David Z

Thanks.
My question was when exactly do you need to run the steps. I suspect that many people have task sequences with loads of "use toolkit package" and "gather" in places when they are NOT needed.
First let's look at the step "Use Toolkit Package". There is no reference to that task sequence step in the MDT documentation. Im aware that this simply copies the "deployment share" so all the scripts etc that are necessary for future task sequence steps
are available (In MDT only environments this was not necessary as the UNC path to the deployment share was always available - so this is an SCCM only step). Your reference states that it copies it to the local hard drive. This is not entirely true. I understand
that when Winpe is loaded, it is loaded into a ramdrive and therefore my "Use Toolkit package" step which is the first in the task sequence is loaded somewhere into the "RAM" drive (probably under "X" drive somewhere?).
So my assumption is that "Use toolkit package" must be run as the first task sequence step, then any time immediately after the winpe system is restarted. If, during winpe and before the OS is loaded onto the hard drive, you format the hard drive (which
is often the case), you do not need to run "Use Toolkit.." as it still exists in the RAM drive. When you apply the OS and restart, and then run "Use toolkit.." again, it must magically work out that it is to then load to the hard drive and not the RAM drive.
However, once the "deployment share" has been loaded to hard drive, Im assuming that you never need to run the "Use toolkit.." again even if the system restarts as once it is loaded to the hard drive, it remains there (assuming you dont format disks again
which is unlikely after the OS has loaded).
The answer to "when must you run Gather" is alot trickier. The first assumption is that Gather has to be run immediately after "Use toolkit..." as the system has initialised or restarted and none of the variables created by "gather" exist.
Im guessing that "gather" may need to be run when you suspect that something in the rules file has changed. For example, you may have run a task sequence step that sets variable "A" for the first time. Your rules file may generate another variable, "B",
based on variable "A" so "gather" must be run to evaluate "B".
However, once the OS has loaded and "gather" has been run, the variables.dat file is created and remains permanently on disk so that if the machine is restarted again, you dont have to run "gather" as all the variables persist in variables.dat.
All of the above is an educated guess as I have searched the web extensively and have not found a definitive explanation. I would be grateful if anything above could be confirmed/denied so this could remain as a definitive guide that may not help just
me, but others :-).
Thanks
David Z

Making Solaris package and dealing with symlinks

Hello,
we are developping an application that runs on Solaris 8 and 9, and we distribute it as a number of packages. We have a problem in one package where we have to install some binaries in a subdirectory under /opt. If we put:
d base /opt 0775 root bin
d base /opt/subdir 0755 root bin
In the template file used in building the package, then we have a problem on one of our machines, where /opt
is a symlink to /export/home/opt - it seems pkgadd wants /opt to be a regular directory, so it creates it, overwriting the symlink and making everything previously under /opt unavailable (though it's still under /export/home/opt).
If we remove the files, when we install the package on a machine without an /opt directory, the install fails. Is there some way around these two corner cases? Like telling pkgadd that if /opt is a symlink to leave it like that?

I checked out https://wiki.archlinux.org/index.php/Initramfs, and I'm not sure what to do. I rebooted a few times in attempt to get things going. I'm assuming I need to start by logging in to the live CD as root and mounting the sda in which Arch is installed? I don't know how to mount root nor know the complete title for the Arch partition (sda x,x). Sorry for the hassle.
Edit: Found https://wiki.archlinux.org/index.php/Ch … partitions. Be back in a bit.
I currently have the temporary filesystems mounted, chrooted, and am in bash.
# mkinitcpio -p linux
doesn't work. I tried
mkinitcpio -g ..... 3.6.10-1-ARCH
and I received something about 3.6.10 and a module directory.
Last edited by illusory (2012-12-23 23:26:00)

How to filter the file type and size when uploadind files into APEX

Hi,
I was wondering how I can do to validate the size of a file, before moving it to my table ? I'd like to filter the file type, but for this one, I think I can use regular expressions in a validation process.
I don't know if there is a way to read the file size even before sending it into the temporary file table.
Thank you
Leinad

Hello Leinad,
AFAIK, you have to create an APEX validation (PL/SQL returns Boolean or Returns error text), which will query the file details from apex_flow_files table. Here you can get filetype and size etc.
So just validate and if any validation fails, then delete the file from apex_flow_files and riase error message.
Regards,
Hari
P.S. Please note that, if there are other apex validations on your page and if they fail, still apex will load the file into apex_flow_files table. So it's good idea to create a validation (PL/SQL) which will fire (condition) when inline validation errors occured. Make sure that this is the LAST validation on your page in sequence. And here you can write code to delete the file from apex_flow_files table.
Edited by: Hari_639 on Sep 20, 2012 10:09 PM

Changes font and size when cutting and pasting

Cutting and pasting in a document made with a single font and size results in the moved word changing font and size. Checked all preferences, etc. and can't figure it out. Thanks, Jim

Hello
Look at:
http://discussions.apple.com/thread.jspa?messageID=607239
Yvan KOENIG (from FRANCE mardi 26 septembre 2006 20:03:27)

Can I set JVM memory size when running applets?

Hi,
I have downloaded an applet that renders panoramic images and
I have a problem with Java memory. I remember that default maximum
size that applet can use is 70MB, and the problem is 70MB is
not enough when rendering big images. It is OK when I add
"-Xmx -Xms" parameters in the Java Control but I cannot tell
everyone who wants to see my images to go control panel, add
parameters etc..
So my question is...
Is it possible add "-Xmx -Xms" parameters inside the applet file
so that these parameters run automatically when executing applet?
Thanks in advance for your reply!
Hyung

Hi,
I have downloaded an applet that renders panoramic
images and
I have a problem with Java memory. I remember that
default maximum
size that applet can use is 70MB, and the problem is
70MB is
not enough when rendering big images. It is OK when I
add
"-Xmx -Xms" parameters in the Java Control but I
cannot tell
everyone who wants to see my images to go control
panel, add
parameters etc..
So my question is...
Is it possible add "-Xmx -Xms" parameters inside the
applet file
so that these parameters run automatically when
executing applet?
Thanks in advance for your reply!
HyungA potential workaround I would try is is use ByteBuffers
(T)

Query that becomes slower and slower when runned several times

Hi everybody,
I have an issue with one querie...
I have a select that is a join between 3 subqueries, 2 of them are using a function with pipeline.
When I run this query it work fine.
* First run lasts less than 1 sec.
* Second run lasts less than 1 sec.
* Third run lasts 2 sec.
* Fourth run lasts 2 min.
* Fifth run lasts 10 min.
* ... and then worse an worse...
Of course, I always use same bind variables and data within the database does not change.
I looked at the execution plan that seems to be the same for all the runs.
The problem is during the Execute phase :
for the first run :
call count cpu elapsed disk query current rows
Parse 1 0.00 0.00 0 0 0 0
Execute 1 0.20 0.20 0 1215 0 0
Fetch 3 0.12 0.14 0 246 0 19
total 5 0.33 0.36 0 1461 0 19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66
for the fifth run
call count cpu elapsed disk query current rows
Parse 1 0.01 0.01 0 0 0 0
Execute 1 95.29 100.96 0 1215 0 0
Fetch 3 0.27 0.39 0 246 0 19
total 5 95.57 101.36 0 1461 0 19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66
I didn't find dynamic sampling during the execution plan.
All subqueries are very stable in time.
When the join query starts to have a strange behavior, subqueries are still very perfomant !
If I flush the shared pool, the problem disappear and the cycle restarts...
1) any idea of the root cause of the issue ?
2) is there a solution (with hint for instance) for not recording the query inthe shared pool ?
Thanks in advance...
The query is :
select
a.anneefiscale,
a.marque,
a.priorite,
a.de,
b.eng_et_real_total "eng et real annee moins 1",
c.estime "estime",
a.engage_nip "engage nip",
a.engage_autre "engage autre",
a.engage_total "engage total",
a.realise_nip "realise nip",
a.realise_autre "realise autre",
a.realise_total "realise total",
a.eng_et_real_nip "eng et real nip",
a.eng_et_real_autre "eng et real autre",
a.eng_et_real_total "eng et real total",
decode(c.estime,0,NULL,round(a.eng_et_real_total/c.estime*100,1)) "pourcentage"
from
select
anneefiscale,
marque,
priorite,
de,
round(sum(engage_nip)) engage_nip,
round(sum(engage_autre)) engage_autre,
round(sum(engage_nip)+sum(engage_autre)) engage_total,
round(sum(realise_nip)) realise_nip,
round(sum(realise_autre)) realise_autre,
round(sum(realise_nip)+sum(realise_autre)) realise_total,
round(sum(engage_nip)+sum(realise_nip)) eng_et_real_nip,
round(sum(engage_autre)+ sum(realise_autre)) eng_et_real_autre,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
union
select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
union
select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
group by anneefiscale, marque, priorite, de
) a,
select
anneefiscale,
marque,
de,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
union
select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
union
select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
group by anneefiscale, marque, de
) b,
select
annee_fiscale.nom anneefiscale,
marque.nom marque,
de.nom de,
round(sum(montant)) estime
from
estime,
annee_fiscale,
marque,
enseigne,
groupe,
de,
reseau
where
estime.id_annee_fiscale_fk = annee_fiscale.id_annee_fiscale and
estime.id_marque_fk = marque.id_marque and
estime.id_enseigne_fk = enseigne.id_enseigne and
estime.id_type_estime_fk = :P50_TYPE_ESTIME and
enseigne.id_groupe_fk = groupe.id_groupe and
groupe.id_de_fk = de.id_de and
de.id_reseau_fk = reseau.id_reseau and
(:P50_ANNEE_FISCALE is NULL OR :P50_ANNEE_FISCALE=0 OR estime.id_annee_fiscale_fk = :P50_ANNEE_FISCALE) and
(:P50_RESEAU is NULL OR :P50_RESEAU=0 OR reseau.id_reseau = :P50_RESEAU) and
(:P50_DE is NULL OR :P50_DE=0 OR de.id_de = :P50_RESEAU)
group by annee_fiscale.nom, marque.nom, de.nom
) c
where
a.marque=b.marque(+) and a.de=b.de(+) and
a.marque=c.marque(+) and a.de=c.de(+)
order by
a.anneefiscale, a.marque, a.de;
Edited by: user7499092 on 17 nov. 2012 05:50
Edited by: user7499092 on 17 nov. 2012 05:50

Hi Nikolay
Concerning point 2, the database seems perfectly OK and I encountered an issue only with this query :-(
The database is hosted on a dedicated server and I am the only one user. Moreover the issue is reproducible as I want... Very strange for me...
I am very interested on a method to check waits and more precisely IO waits. Can you describe me a procedure ?
The only one thing I can produce is the tkprof output focused on the fifth run that is very long...
TKPROF: Release 11.2.0.1.0 - Development on Sat Nov 17 04:45:56 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Trace file: MYDB_ora_3493.trc
Sort options: default
count    = number of times OCI procedure was executed
cpu      = cpu time in seconds executing
elapsed = elapsed time in seconds executing
disk     = number of physical reads of buffers from disk
query    = number of buffers gotten for consistent read
current = number of buffers gotten in current mode (usually for update)
rows     = number of rows processed by the fetch or execute call
select
a.anneefiscale,
a.marque,
a.priorite,
a.de,
b.eng_et_real_total "eng et real annee moins 1",
c.estime "estime",
a.engage_nip "engage nip",
a.engage_autre "engage autre",
a.engage_total "engage total",
a.realise_nip "realise nip",
a.realise_autre "realise autre",
a.realise_total "realise total",
a.eng_et_real_nip "eng et real nip",
a.eng_et_real_autre "eng et real autre",
a.eng_et_real_total "eng et real total",
decode(c.estime,0,NULL,round(a.eng_et_real_total/c.estime*100,1)) "pourcentage"
from
select
anneefiscale,
marque,
priorite,
de,
round(sum(engage_nip)) engage_nip,
round(sum(engage_autre)) engage_autre,
round(sum(engage_nip)+sum(engage_autre)) engage_total,
round(sum(realise_nip)) realise_nip,
round(sum(realise_autre)) realise_autre,
round(sum(realise_nip)+sum(realise_autre)) realise_total,
round(sum(engage_nip)+sum(realise_nip)) eng_et_real_nip,
round(sum(engage_autre)+ sum(realise_autre)) eng_et_real_autre,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
    select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
    union
    select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
    union
    select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,:P50_ANNEE_FISCALE))
group by anneefiscale, marque, priorite, de
) a,
select
anneefiscale,
marque,
de,
round(sum(engage_nip)+sum(engage_autre)+sum(realise_nip)+sum(realise_autre)) eng_et_real_total
from
    select * from table(mypackage.reporting_tbordmarque_promo(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
    union
    select * from table(mypackage.reporting_tbordmarque_nip(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
    union
    select * from table(mypackage.reporting_tbordmarque_eng(:P50_RESEAU,:P50_DE,:P50_GROUPE,mypackage.get_previous_annee_fiscale(:P50_ANNEE_FISCALE)))
group by anneefiscale, marque, de
) b,
select
    annee_fiscale.nom anneefiscale,
    marque.nom marque,
    de.nom de,
    round(sum(montant)) estime
from
    estime,
    annee_fiscale,
    marque,
    enseigne,
    groupe,
    de,
    reseau
where
    estime.id_annee_fiscale_fk = annee_fiscale.id_annee_fiscale and
    estime.id_marque_fk = marque.id_marque and
    estime.id_enseigne_fk = enseigne.id_enseigne and
    estime.id_type_estime_fk = :P50_TYPE_ESTIME and
    enseigne.id_groupe_fk = groupe.id_groupe and
    groupe.id_de_fk = de.id_de and
    de.id_reseau_fk = reseau.id_reseau and
    (:P50_ANNEE_FISCALE is NULL OR :P50_ANNEE_FISCALE=0 OR estime.id_annee_fiscale_fk = :P50_ANNEE_FISCALE) and
    (:P50_RESEAU is NULL OR :P50_RESEAU=0 OR reseau.id_reseau = :P50_RESEAU) and
    (:P50_DE is NULL OR :P50_DE=0 OR de.id_de = :P50_RESEAU)
    group by annee_fiscale.nom, marque.nom, de.nom
) c
where
a.marque=b.marque(+) and a.de=b.de(+) and
a.marque=c.marque(+) and a.de=c.de(+)
order by
a.anneefiscale, a.marque, a.de
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.01       0.01          0          0          0           0
Execute      1     95.29     100.96          0       1215          0           0
Fetch        3      0.27       0.39          0        246          0          19
total        5     95.57     101.36          0       1461          0          19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
Optimizer mode: ALL_ROWS
Parsing user id: 66
Rows     Row Source Operation
     19 SORT ORDER BY (cr=55154 pr=0 pw=0 time=0 us cost=39985 size=175631625 card=60045)
     19   HASH JOIN RIGHT OUTER (cr=55154 pr=0 pw=0 time=234 us cost=3348 size=175631625 card=60045)
     19    VIEW (cr=246 pr=0 pw=0 time=198 us cost=52 size=6233 card=23)
     19     HASH GROUP BY (cr=246 pr=0 pw=0 time=108 us cost=52 size=1932 card=23)
    230      HASH JOIN (cr=246 pr=0 pw=0 time=801 us cost=51 size=1932 card=23)
    230       HASH JOIN (cr=238 pr=0 pw=0 time=114 us cost=48 size=1633 card=23)
    230        HASH JOIN (cr=230 pr=0 pw=0 time=1259 us cost=45 size=1265 card=23)
     28         NESTED LOOPS (cr=8 pr=0 pw=0 time=999 us)
     28          NESTED LOOPS (cr=7 pr=0 pw=0 time=135 us cost=8 size=297 card=9)
      4           NESTED LOOPS (cr=5 pr=0 pw=0 time=39 us cost=5 size=75 card=3)
      1            TABLE ACCESS FULL DE (cr=3 pr=0 pw=0 time=0 us cost=4 size=18 card=1)
      4            TABLE ACCESS BY INDEX ROWID GROUPE (cr=2 pr=0 pw=0 time=33 us cost=1 size=49 card=7)
      4             INDEX RANGE SCAN GROUPE_DE_FK (cr=1 pr=0 pw=0 time=18 us cost=0 size=0 card=7)(object id 69080)
     28           INDEX RANGE SCAN ENSEIGNE_GROUPE_FK (cr=2 pr=0 pw=0 time=48 us cost=0 size=0 card=3)(object id 69079)
     28          TABLE ACCESS BY INDEX ROWID ENSEIGNE (cr=1 pr=0 pw=0 time=0 us cost=1 size=24 card=3)
    852         TABLE ACCESS FULL ESTIME (cr=222 pr=0 pw=0 time=1337 us cost=37 size=11638 card=529)
      7        VIEW index$_join$_013 (cr=8 pr=0 pw=0 time=18 us cost=3 size=112 card=7)
      7         HASH JOIN (cr=8 pr=0 pw=0 time=18 us)
      7          INDEX FAST FULL SCAN ANNEE_FISCALE_CON (cr=4 pr=0 pw=0 time=6 us cost=1 size=112 card=7)(object id 68294)
      7          INDEX FAST FULL SCAN ANNEE_FISCALE_PK (cr=4 pr=0 pw=0 time=6 us cost=1 size=112 card=7)(object id 68293)
     35       VIEW index$_join$_014 (cr=8 pr=0 pw=0 time=340 us cost=3 size=455 card=35)
     35        HASH JOIN (cr=8 pr=0 pw=0 time=272 us)
     35         INDEX FAST FULL SCAN MARQUE_PK (cr=4 pr=0 pw=0 time=0 us cost=1 size=455 card=35)(object id 68321)
     35         INDEX FAST FULL SCAN MARQUE_UK (cr=4 pr=0 pw=0 time=102 us cost=1 size=455 card=35)(object id 68322)
     19    HASH JOIN RIGHT OUTER (cr=54908 pr=0 pw=0 time=216 us cost=3295 size=159359430 card=60045)
     19     VIEW (cr=28629 pr=0 pw=0 time=666 us cost=94 size=6640584 card=24504)
     19      HASH GROUP BY (cr=28629 pr=0 pw=0 time=504 us cost=94 size=7743264 card=24504)
     41       VIEW (cr=28629 pr=0 pw=0 time=80 us cost=92 size=7743264 card=24504)
     41        SORT UNIQUE (cr=28629 pr=0 pw=0 time=40 us cost=92 size=49008 card=24504)
     42         UNION-ALL (cr=28629 pr=0 pw=0 time=1066 us)
     11          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_PROMO (cr=13107 pr=0 pw=0 time=230 us cost=29 size=16336 card=8168)
     18          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_NIP (cr=14242 pr=0 pw=0 time=136 us cost=29 size=16336 card=8168)
     13          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_ENG (cr=1280 pr=0 pw=0 time=84 us cost=29 size=16336 card=8168)
     19     VIEW (cr=26279 pr=0 pw=0 time=162 us cost=94 size=58393032 card=24504)
     19      HASH GROUP BY (cr=26279 pr=0 pw=0 time=36 us cost=94 size=56800272 card=24504)
     42       VIEW (cr=26279 pr=0 pw=0 time=123 us cost=92 size=56800272 card=24504)
     42        SORT UNIQUE (cr=26279 pr=0 pw=0 time=82 us cost=92 size=49008 card=24504)
     42         UNION-ALL (cr=26279 pr=0 pw=0 time=328 us)
     13          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_PROMO (cr=12209 pr=0 pw=0 time=72 us cost=29 size=16336 card=8168)
     19          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_NIP (cr=13006 pr=0 pw=0 time=108 us cost=29 size=16336 card=8168)
     10          COLLECTION ITERATOR PICKLER FETCH REPORTING_TBORDMARQUE_ENG (cr=1064 pr=0 pw=0 time=36 us cost=29 size=16336 card=8168)
SQL ID: cb21bacyh3c7d
Plan Hash: 3452538079
select metadata
from
kopm$ where name='DB_FDO'
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.00       0.00          0          0          0           0
Execute      1      0.00       0.00          0          0          0           0
Fetch        1      0.00       0.00          0          2          0           1
total        3      0.00       0.00          0          2          0           1
Misses in library cache during parse: 0
Optimizer mode: CHOOSE
Parsing user id: SYS   (recursive depth: 1)
Rows     Row Source Operation
      1 TABLE ACCESS BY INDEX ROWID KOPM$ (cr=2 pr=0 pw=0 time=0 us cost=1 size=108 card=1)
      1   INDEX UNIQUE SCAN I_KOPM1 (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)(object id 553)
etc etc etc etc etc
OVERALL TOTALS FOR ALL NON-RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse        1      0.01       0.01          0          0          0           0
Execute      1     95.29     100.96          0       1215          0           0
Fetch        3      0.27       0.39          0        246          0          19
total        5     95.57     101.36          0       1461          0          19
Misses in library cache during parse: 1
Misses in library cache during execute: 1
OVERALL TOTALS FOR ALL RECURSIVE STATEMENTS
call     count       cpu    elapsed       disk      query    current        rows
Parse       16      0.01       0.00          0          0          0           0
Execute     23      0.02       0.03          1          5         26           2
Fetch       33      0.67       0.74          0      54935          0        1447
total       72      0.70       0.79          1      54940         26        1449
Misses in library cache during parse: 2
Misses in library cache during execute: 2
   13 user SQL statements in session.
   11 internal SQL statements in session.
   24 SQL statements in session.
Trace file: MYDB_ora_3493.trc
Trace file compatibility: 11.1.0.7
Sort options: default
       1 session in tracefile.
      13 user SQL statements in trace file.
      11 internal SQL statements in trace file.
      24 SQL statements in trace file.
      12 unique SQL statements in trace file.
     485 lines in trace file.
     176 elapsed seconds in trace file.Edited by: easyoups on Nov 19, 2012 6:50 AM

Firefox 14 crashes on start up, in safe mode, trying to create new profile, after complete removal and reinstall, when run under different user

AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342625511
EMCheckCompatibility: true
Email: (email removed)
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342622791
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 1909
StartupTime: 1342625464
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed.
Deleted all of these and reinstalled
/Users/<user_acct>/Library/Application Support/Firefox/
/Users/<user_acct>/Library/Caches/Firefox/
/Users/<user_acct>/Library/Preferences/org.mozilla.firefox.plist
I have tried rebooting, running Disk Utility and repaired permissions, and checked I have admin privileges.
I have Reset Launch Services in Snow Leopard.
I have created a test account
System Preferences > Users & Groups create a "Test Account"
then tried launching FF from there = crash
I have installed FF 13.0.1
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:13.0.1
BuildID: 20120614114901
CrashTime: 1342642579
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342642540
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 26
StartupTime: 1342642569
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/13.0.1/firstrun/
Vendor: Mozilla
Version: 13.0.1
I have installed version 12 and
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:12.0
BuildID: 20120420145725
CrashTime: 1342643047
EMCheckCompatibility: true
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342643035
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342643035
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/12.0/firstrun/
Vendor: Mozilla
Version: 12.0
no crash ids since this is version 3.6, the only version that doesn't crash, and I have to use Firefox for work stuff.
I have submitted over a hundred crash reports and included my email, but no one has ever contacted me with any help. This has been going on for weeks. I have been forced to use an outdated version of FF because no one has bother to get back to me. I would be happy to update to 14 and start the crash cycle again if someone wants to give me some suggestions I haven't tried already.
BTW, no font conflicts or RAM problems, (someone else's issue)

Maybe you did't understand my previous statement. There are no crashes in FF 3.6, There is no previous evidence FF 14 was ever here, I completely uninstalled all trace of Firefox, no app data, no preferences, no cache. I will upgrade to FF14 so I can send IDs,
so here ya go.
Crash ID: bp-fa9da320-92dc-47f7-afff-33e702120718
AdapterDeviceID: 0x2a02
AdapterVendorID: 0x8086
Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:14.0.1
BuildID: 20120713134347
CrashTime: 1342655269
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 7ffffffff0dea000
FramePoisonSize: 4096
InstallTime: 1342655256
Notes: AdapterVendorID: 0x8086, AdapterDeviceID: 0x2a02GL Context? GL Context+ GL Layers? GL Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
StartupTime: 1342655256
Theme: classic/1.0
Throttleable: 1
URL: http://www.mozilla.org/en-US/firefox/14.0.1/whatsnew/?oldversion=rv:1.9.2.13
Vendor: Mozilla
Version: 14.0.1
This report also contains technical information about the state of the application when it crashed.

After upgrading to Mavericks, my macbook pro (15' early 2011) keeps crashing and restarting when running on battery.

It happens too much. I have 8gbs of Kingstom RAM installed. Is there a problem with Mavericks and Kingstom RAM?
This is the report i get after restarting:
Anonymous UUID:       0BAE1215-28B3-3F86-AA86-D3E08FC8B1AC
Mon Nov 18 00:23:03 2013
panic(cpu 0 caller 0xffffff7fa7d4b041): "AGC GPU REGISTER RESTORE FAILED : rdar://7254528, VendorID invalid"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.12/src/Appl eMuxControl/kext/AGCPowerManagement.cpp:1036
Backtrace (CPU 0), Frame : Return Address
0xffffff810ea23de0 : 0xffffff8026022f69
0xffffff810ea23e60 : 0xffffff7fa7d4b041
0xffffff810ea23ea0 : 0xffffff7fa7d4d668
0xffffff810ea23ec0 : 0xffffff80264b05fb
0xffffff810ea23f20 : 0xffffff802604a15a
0xffffff810ea23fb0 : 0xffffff80260d6aa7
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.4.12)[A4934A66-0E30-36E9-984A-650481102449]@ 0xffffff7fa7d40000->0xffffff7fa7d52fff
            dependency: com.apple.driver.AppleGraphicsControl(3.4.12)[661E3C87-5B97-3272-88FF-B9BA9B6E2 4ED]@0xffffff7fa7d27000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7fa69fb000
            dependency: com.apple.iokit.IOPCIFamily(2.8)[447B4896-16FF-3616-95A2-1C516B2A1498]@0xffffff 7fa66ba000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.6)[38E388A5-92D6-3388-B799-F2498E582287]@0 xffffff7fa6f31000
            dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7fa7d3b000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13A603
Kernel version:
Darwin Kernel Version 13.0.0: Thu Sep 19 22:22:27 PDT 2013; root:xnu-2422.1.72~6/RELEASE_X86_64
Kernel UUID: 1D9369E3-D0A5-31B6-8D16-BFFBBB390393
Kernel slide:     0x0000000025e00000
Kernel text base: 0xffffff8026000000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 638958040535
last loaded kext at 311440015536: com.apple.filesystems.smbfs          2.0.0 (addr 0xffffff7fa8608000, size 335872)
last unloaded kext at 318563611238: com.apple.filesystems.msdosfs          1.9 (addr 0xffffff7fa85fa000, size 57344)
loaded kexts:
com.apple.filesystems.smbfs          2.0.0
com.apple.filesystems.autofs          3.0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.filesystems.ntfs          3.11
com.apple.driver.AGPM          100.14.11
com.apple.iokit.IOBluetoothSerialManager          4.2.0f6
com.apple.driver.AppleMikeyHIDDriver          124
com.apple.driver.AppleUpstreamUserClient          3.5.13
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleMikeyDriver          2.5.2fc2
com.apple.kext.AMDFramebuffer          1.1.4
com.apple.driver.AppleIntelHD3000Graphics          8.1.8
com.apple.driver.AppleHDA          2.5.2fc2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleHWAccess          1
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleLPC          1.7.0
com.apple.AMDRadeonX3000          1.1.4
com.apple.driver.AppleSMCLMU          2.0.4d1
com.apple.driver.AppleMuxControl          3.4.12
com.apple.driver.AppleMCCSControl          1.1.12
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.SMCMotionSensor          3.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB          8.1.8
com.apple.kext.AMD6000Controller          1.1.4
com.apple.driver.AppleThunderboltIP          1.0.10
com.apple.driver.AppleUSBTCButtons          240.2
com.apple.driver.AppleUSBTCKeyboard          240.2
com.apple.driver.AppleIRController          325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          35
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.4.0
com.apple.driver.AppleUSBHub          650.4.4
com.apple.driver.AppleSDXC          1.4.0
com.apple.iokit.AppleBCM5701Ethernet          3.6.9b9
com.apple.driver.AirPort.Brcm4331          700.20.22
com.apple.driver.AppleFWOHCI          4.9.9
com.apple.driver.AppleAHCIPort          2.9.5
com.apple.driver.AppleUSBEHCI          650.4.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          2.0
com.apple.driver.AppleACPIButtons          2.0
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          2.0
com.apple.driver.AppleACPIEC          2.0
com.apple.driver.AppleAPIC          1.7
com.apple.driver.AppleIntelCPUPowerManagementClient          216.0.0
com.apple.nke.applicationfirewall          153
com.apple.security.quarantine          3
com.apple.driver.AppleIntelCPUPowerManagement          216.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.6.0
com.apple.iokit.IOSerialFamily          10.0.7
com.apple.iokit.IOSurface          91
com.apple.iokit.IOBluetoothFamily          4.2.0f6
com.apple.driver.DspFuncLib          2.5.2fc2
com.apple.vecLib.kext          1.0.0
com.apple.iokit.IOAudioFamily          1.9.4fc11
com.apple.kext.OSvKernDSPLib          1.14
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.driver.AppleSMBusPCI          1.0.12d1
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.5.1d27
com.apple.iokit.IOAcceleratorFamily          98.7.1
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IONDRVSupport          2.3.6
com.apple.driver.AppleGraphicsControl          3.4.12
com.apple.driver.AppleSMBusController          1.0.11d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport          4.2.0f6
com.apple.driver.AppleSMC          3.1.6d1
com.apple.driver.AppleHDAController          2.5.2fc2
com.apple.iokit.IOHDAFamily          2.5.2fc2
com.apple.kext.AMDSupport          1.1.4
com.apple.AppleGraphicsDeviceControl          3.4.12
com.apple.iokit.IOGraphicsFamily          2.3.6
com.apple.driver.AppleThunderboltDPInAdapter          2.5.0
com.apple.driver.AppleThunderboltDPAdapterFamily          2.5.0
com.apple.driver.AppleThunderboltPCIDownAdapter          1.4.0
com.apple.driver.AppleUSBMultitouch          240.6
com.apple.driver.AppleUSBMergeNub          650.4.0
com.apple.iokit.IOUSBHIDDriver          650.4.4
com.apple.driver.AppleUSBComposite          650.4.0
com.apple.driver.AppleThunderboltNHI          1.9.2
com.apple.iokit.IOThunderboltFamily          2.8.5
com.apple.iokit.IOUSBUserClient          650.4.4
com.apple.iokit.IOEthernetAVBController          1.0.3b3
com.apple.driver.mDNSOffloadUserClient          1.0.1b4
com.apple.iokit.IO80211Family          600.34
com.apple.iokit.IONetworkingFamily          3.2
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IOAHCIFamily          2.6.0
com.apple.iokit.IOUSBFamily          650.4.4
com.apple.driver.AppleEFINVRAM          2.0
com.apple.driver.AppleEFIRuntime          2.0
com.apple.iokit.IOHIDFamily          2.0.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          278.10
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.AppleKeyStore          2
com.apple.driver.DiskImages          371.1
com.apple.iokit.IOStorageFamily          1.9
com.apple.iokit.IOReportFamily          21
com.apple.driver.AppleFDEKeyStore          28.30
com.apple.driver.AppleACPIPlatform          2.0
com.apple.iokit.IOPCIFamily          2.8
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.pthread          1
com.apple.kec.corecrypto          1.0

Hi. I'm not trying to rush things, you may have a different problem, but your issue looks quite familiar to me. I recently had a problem with the discrete graphics card (the Radeon GPU) due to overheating, all because a faulty application of the thermal compound in the factory.
In my case, the problem started slowly and intermittently, a few days after a gaming session (Quake 3) of about three hours (at the moment, I didn't realized that could be linked to the problem).
This issue is being actively discussed in another threads in this forum, but so far there's enough evidence that it's been causing similar problems for 2011 MBPs owners: screen corruption, black/blue screens, and in some cases, a total inability to boot. Some of the threads I'm talking about:
https://discussions.apple.com/message/13150366#13150366
https://discussions.apple.com/message/21110132#21110132
So far, and since the problem seems to affect only the discrete GPU (that's why you can boot in safe mode) a possible solution is to disable it by removing some extensions which prevent OS X from loading the Radeon drivers. This post describing the process (there are different files involved depending of your GPU version, so make sure you are moving the right ones):
https://discussions.apple.com/message/22521574#22521574
In the case your discrete GPU survived and is not permanently damaged, I personally had success by changing the thermal compound myself, which completely fixed the problem (at least for now). I've posted about it here:
https://discussions.apple.com/message/22630561#22630561
I hope you can find a solution, believe me I know the feeling when you see your expensive machine turning into a brick and it *****.
Good luck!

Create Table using DBMS_SQL package and size not exceeding 64K

I have a size contraint that my SQL size should not exceed 64K.
Now I would appriciate if some one could tell me how to create a table using
Dynamic sql along with usage of DBMS_SQL package.
Brief Scenario: Users at my site are not given permission to create table.
I need to write a procedure which the users could use to create a table .ALso my SQL size should not exceed 64K. Once this Procedure is created using DBMS_SQL package ,user should pass the table name to create a table.
Thanks/

"If a user doesn't have permission to create a table then how do you expect they will be able to do this"
Well, it depends on what you want to do. I could write a stored proc that creates a table in my schema and give some other user execute privilege on it. They would then be able to create a able in my schema without any explicitly granted create table privilege.
Similarly, assuming I have CREATE ANY TABLE granted directly to me, I could write a stroe proc that would create a table in another users schema. As long as they have quota on their default tablespace, they do not need CREATE TABLE privileges.
SQL> CREATE USER a IDENTIFIED BY a
2 DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
User created.
SQL> GRANT CREATE SESSION TO a;
Grant succeeded.
SQL> CREATE TABLE a.t (id NUMBER, descr VARCHAR2(10));
CREATE TABLE a.t (id NUMBER, descr VARCHAR2(10))
ERROR at line 1:
ORA-01950: no privileges on tablespace 'USERS'So, give them quota on the tablespace and try again
SQL> ALTER USER a QUOTA UNLIMITED ON users;
User altered.
SQL> CREATE TABLE a.t (id NUMBER, descr VARCHAR2(10));
Table created.Now lets see if it really belongs to a:
SQL> connect a/a
Connected.
SQL> SELECT table_name FROM user_tables;
TABLE_NAME
T
SQL> INSERT INTO t VALUES (1, 'One');
1 row created.Yes, it definitely belongs to a. Just to show that ther is nothing up my sleeve:
SQL> create table t1 (id NUMBER, descr VARCHAR2(10));
create table t1 (id NUMBER, descr VARCHAR2(10))
ERROR at line 1:
ORA-01031: insufficient privilegesI can almost, but not quite, see a rationale for the second case if you want to enforce some sort of naming or location standards but the whole thing seems odd to me.
Users cannot create tables, so lets give them a procedure to create tables?
John

Strange position and size when QT opens

I'm a Windows user. My Canon Ixus 220 HS digicam has a neat 1920x1080 movie capability. It creates files in MOV format.
But when I play these on my Windows XP PC, QT always opens offset down and right (100,100) and at a size of 1936 x 1205, which is greater than my 1920x1200 screen!
Here's an example:
http://dl.dropbox.com/u/4019461/QT-Puzzle-1.jpg
So I can't see the controls until I use View > Half Screen.
This is becoming a real PITA, so I hope one of the experts can suggest a fix please.
In case it helps, here's what MediaInfo reports for a typical MOV file:
http://dl.dropbox.com/u/4019461/QT-Problem.jpg
Terry, East Grinstead, UK

It seems this is a long-standing problem that Apple have not not bothered to fix.
http://www.velocityreviews.com/forums/t719594-quicktime-player-opens-too-large-o f-a-screen.html
Terry, East Grinstead, UK

How can I get size of fetched data size when run a SQL ?

Hi,
When I run a SQL how can I get fetched data size?
regards,

We can get it using some calculations:
1. SQL%ROWCOUNT attribute will fetch you number of rows returned in a SQL statement.
Problem-->Now you need to get the size of 1 row.
Solution-->
Step 1.We can get size of table from dba_segment data dictionary.
Select block_size from dba_segemnts where segment name like '%YOURTABLE%';
Step2 . Get count of rows in your table
Select count(*) from YOUR_TABLE
Step 3.
Get size of 1 row--> Divide result in Step1 by result in Step 2.
Required result--> multiple result in step3 with SQL%ROWCOUNT..
I hope this is what u want.

Impact on physcial machines and network when running Capacity Planner.

I need to find a white paper or an app note that explains how Capacity Planner collects data from physical machines. I seem to have been pulled into the middle of a squabble between IT staff members that has the manager halting a virtualization project. I have a virtual server running the Collector for Capacity Planner for 157 machines discovered in the customers network. The Collector has been working fine, I am getting the inventory data I need to get on all systems except one. At the request of the customer, I disabled the host name mask so we could see real host names in the report. I also disabled the WMI checking since it only worked on half of my customers machines. Using the Registry setting has gotten the inventory on all machines except one. This one machine (an email server) has very strict administration control that is preventing the Collector service user from connecting. When my contact and I tried to gain the needed access, our project was halted because the email server admin report an enormous amount of connection attempts from the Collection server that caused an issue with the mail server (was never able to get specifics on the issue). This caused the manager to error on the side of caution and halt the project since the mail server admin believed the Collector caused his server issues. My contact and I will be removing the mail server from the virtualization project, but to get the manager to allow the project to continue, I need to put something in her hands that explains how the Collector is getting it's data. I have tried my self explaining it, but she is insisting on something from VMWare that explains how the collector is getting the data. I know it is active collection, and as far as I know it just uses the built in WMI or Remote Registry services to request monitoring data that causes no impact to system performance. I will be searching for an app note or a white paper or a KB article today, I would greatly appreciate if someone already knows of something that can settle this argument for me and help me get this project back on track.
thank you

Almost same setting here, same troubles.
If I restart them via Screen Sharing via the Restart Button on the Login Window, they sometimes show up correctly. But this is way too annoying.

Minimizing Solaris packages and size when running Sunray

Similar Messages

Maybe you are looking for