Minimum IOS version for IPS sensor v6 on CAT6500 series
What is the recommended minimum Cisco IOS Software that will support Cisco IPS Sensor Software v6 on the CAT6509
It depends on your Supervisor Engine, MSFC/PFC and capture method.
There's a good IDSM "software and hardware requirements" table here (but better elesewhere on CCO)
http://cisco.com/en/US/docs/security/ips/5.0/installation/guide/hwIdsm2.html
â¢Catalyst software release 7.5(1) or later with Supervisor Engine 1A with MSFC2
â¢Catalyst software release 7.5(1) or later with Supervisor Engine 2 with MSFC2 or PFC2
â¢Cisco IOS software release 12.2(14)SY with Supervisor Engine 2 with MSFC2
â¢Cisco IOS software release 12.1(19)E or later with Supervisor Engine 2 with MSFC2
â¢Cisco IOS software release 12.1(19)E1 or later with Supervisor Engine 1A with MSFC2
â¢Cisco IOS software release 12.2(14)SX1 with Supervisor Engine 720
Similar Messages
-
Is there a minimum IOS version for windows radius 2012R2
Hello,
We use a windows server 2008R2 and NPS for radius authentication of our 887,881 and 891 routers, ASA V8.4, and 3750 switches.
We are thinking about migrate our radius to windows 2012R2, wich is a new version of NPS.
do you know if there is a minimum IOS version required for NPS on 2012R2 Windows ?
ThanksHi,
Yes NPS will work with Window Server 2012R2 and for the minimum server certificate requirement
check the below link.
http://msdn.microsoft.com/en-us/library/cc731363.aspx -
Minimum IOS version for SPAN on 2950s
I have a new IDS sensor that we finally have up and running. In attempting to montor one of our 2950 switches we noticed that the monitor command is not an option. Is there a minimum version or platform that has this option? I have found nothing so far in the online docs. This switch is currently running 12.0(5.3)WC(1).
HI Friend,
The code you are running has the SPAn capability but not very advance features are available.
The command is "port monitor
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/cli/cli_cmds.htm#xtocid1856851
Also the feature has limitation that if the traffic on monitoring port exceed 50% it will be a problem.
Check the release notes for more details
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/2950_wc/1169303.htm#xtocid13
I will say to have more better code on your switch to use SPAN in better way something likt this
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat2950/12119ea1/2950scg/swspan.htm
Yiu can have much better codes like 12.1(20)EA1 and higher.
HTH
Ankur -
What is the minimum software version for Cisco 2620XM to execute mpls?
I am running Version 12.2(24)but enable to run mpls command.
1)Router(config)#tag-switching advertise-tags
2)Router(config)# interface e0/1
Router(config-if)# tag-switching ip
Pls help!!It looks like MPLS really does disappear in 12.4 code for the 2651XM (see below). It's too bad because I could use the features and would rather not have to replace a bunch of routers.
PE#show ver
System returned to ROM by reload
System image file is "flash:c2600-spservicesk9-mz.123-18.bin"
PE#
PE#conf t
Enter configuration commands, one per line. End with CNTL/Z.
PE(config)#int fa0/0
PE(config-if)#mpls ip
PE(config-if)#tag-switching ip
PE(config-if)#end
PE#
PE#show version
System returned to ROM by reload
System image file is "flash:c2600-spservicesk9-mz.124-7a.bin"
PE#
PE#config t
Enter configuration commands, one per line. End with CNTL/Z.
PE(config)#int fa0/0
PE(config-if)#mpls ip
^
% Invalid input detected at '^' marker.
PE(config-if)#tag-switching ip
^
% Invalid input detected at '^' marker.
PE(config-if)#end
PE# -
Is it same IOS version for Switch & Router?
Hi,
Is it same IOS version for Switch & Router?
Regards,
SamuelSam,
The Latest Version depends upon the Switching platform.
For example:
On 2900XL Platform - 12.0(5)WC15
On 2950 - 12.1(22)EA8
On 3500XL Platform - 12.0(5)WC15
On 3550 - 12.2(25)SEE2
It would be better if you specify the switch platform that you have questions about, so we could point you in the right direction.
I hope it helps.
Regards,
Arul -
Minimum flash version for Flex SDK 3.6
Using FB 4.5.1 to build to Flex SDK3.6. For 3.6, what's the minimum flash version. I didn't see it in the readme doc
Hi,
Please visit the URL below for details.
http://www.adobe.com/support/documentation/en/flex/3/releasenotes_flex3_sdk.html
Hope this helps. -
How to select a stable IOS version for switch ?
There isn't any GD version for switch. So how did I know which version is stable ?
thanks!Hi there,
Usually the most efficient way of selecting a stable version of IOS/CatOS is to take a look through the release notes at the caveats section and verify if there are any issues that would affect your network directly. In addition, working with your local SE is a good idea, as they can offer you their design advice. Usually, a wise move is going with the latest release within a given branch is the most stable, as it includes the most bug fixes. I hope this helps. -
AS5350XM - Compatible IOS version for 'ip host ... srv' command.
Hi Friends,
I'm having AS5350XM model of Voice Gateways in CVP8.0 environment working with ICM8.0 and CUCM8.0.
I'd like to define static hostname-to-address mappings in VG for my CVP CallServers along with command argument 'SRV' to use all 4 CVP servers for loadbalancing and failover functionality thereby assigning priority to each call server.
I tried by using a couple of IOS version starting from 12.4(24)T4 till 15.1(3)T, but can't find a particular version which supports the argument 'srv'.
I'd appreciate if someone could suggest me an appropriate IOS version supporting 'srv' argument with 'ip host' command on AS5350XM Gateways.
Pls feel free to revert for any clarifications. Thank you.
Regards,
Soman Nair.You should be able to do it.
In your dial peer you should be able to say
session target dns:callserver.sgp.foobar.com
and in your IP host table
ip host CA1.sgp.foobar.com 10.10.1.2
ip host CA2.sgp.foobar.com 10.10.1.3
ip host CA3.sgp.foobar.com 10.10.1.4
ip host CA4.sgp.foobar.com 10.10.1.5
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA1.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA2.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA3.sgp.foobar.com
ip host _sip._udp.callserver.sgp.foobar.com srv 1 25 5060 CA4.sgp.foobar.com
Regards,
Geoff -
Best IOS version for 3750 switch
I have just received 2 3750 switches, but both have a different IOS version.
One has -> IOS version 12.1(19)EA1d
and the other has -> IOS version 12.2(25)SEB2.
I just want to use the switches as Gb collectors for a serverfarm seperatly (so no stack configuration) with a redundant uplink to my distribution layer.
Can someone advise my which IOS is the best for my network?
Thanx, MartySwitch 1:
Cisco Internetwork Operating System Software
IOS (tm) C3750 Software (C3750-I5-M), Version 12.1(19)EA1d, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 05-Apr-04 22:06 by antonino
Image text-base: 0x00003000, data-base: 0x009206D8
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
2224-3750-037000137 uptime is 23 hours, 52 minutes
System returned to ROM by power-on
System restarted at 09:02:42 GMT Thu Aug 11 2005
System image file is "flash:c3750-i5-mz.121-19.EA1d/c3750-i5-mz.121-19.EA1d.bin"
cisco WS-C3750G-24TS (PowerPC405) processor (revision H0) with 118776K/12288K bytes of memory.
Processor board ID CAT0904X00B
Last reset from power-on
Bridging software.
1 Virtual Ethernet/IEEE 802.3 interface(s)
28 Gigabit Ethernet/IEEE 802.3 interface(s)
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:13:1A:65:50:00
Motherboard assembly number : 73-7058-12
Power supply part number : 341-0045-01
Motherboard serial number : CAT090400A0
Power supply serial number : LIT09020266
Model revision number : H0
Motherboard revision number : A0
Model number : WS-C3750G-24TS-E
System serial number : CAT0904X00B
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
* 1 28 WS-C3750G-24TS 12.1(19)EA1d C3750-I5-M
Configuration register is 0xF
Switch 2:
Cisco IOS Software, C3750 Software (C3750-IPSERVICES-M), Version 12.2(25)SEB2, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Wed 08-Jun-05 01:19 by yenanh
ROM: Bootstrap program is C3750 boot loader
BOOTLDR: C3750 Boot Loader (C3750-HBOOT-M) Version 12.1(14r)EA1a, RELEASE SOFTWARE (fc1)
2224-3750-037000138 uptime is 59 minutes
System returned to ROM by power-on
System image file is "flash:c3750-ipservices-mz.122-25.SEB2/c3750-ipservices-mz.122-25.SEB2.bin"
cisco WS-C3750G-24TS (PowerPC405) processor (revision L0) with 118784K/12280K bytes of memory.
Processor board ID CAT0925Z0WZ
Last reset from power-on
1 Virtual Ethernet interface
28 Gigabit Ethernet interfaces
The password-recovery mechanism is enabled.
512K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address : 00:14:A8:71:CA:00
Motherboard assembly number : 73-7058-13
Power supply part number : 341-0045-01
Motherboard serial number : CAT09251J90
Power supply serial number : PHI09220165
Model revision number : L0
Motherboard revision number : A0
Model number : WS-C3750G-24TS-E
System serial number : CAT0925Z0WZ
Hardware Board Revision Number : 0x09
Switch Ports Model SW Version SW Image
* 1 28 WS-C3750G-24TS 12.2(25)SEB2 C3750-IPSERVICES-M
Configuration register is 0xF -
3560 IOS version for IPT + duplex settings?
Hi! Need a recommendation of which IOS version to use for a 3560 w inline power to be used with ip telephony. Also does the ip phones work well with duplex set to auto?
You check after the IOS ver 12.1(11). This will support IPT
-
Minimum IOS version to support scp URLs
While recent IOS versions support scp sources or destinations for copy
operations ...
aprompt#copy running-config ?
flash1: Copy to flash1: file system
flash2: Copy to flash2: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
http: Copy to http: file system
https: Copy to https: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
scp: Copy to scp: file system
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
tmpsys: Copy to tmpsys: file system
aprompt#copy running-config
... older ones obviously don't (here we have 12.1):
aprompt#copy running-config ?
bs: Copy to bs: file system
flash: Copy to flash: file system
ftp: Copy to ftp: file system
null: Copy to null: file system
nvram: Copy to nvram: file system
rcp: Copy to rcp: file system
running-config Update (merge with) current system configuration
startup-config Copy to startup configuration
system: Copy to system: file system
tftp: Copy to tftp: file system
xmodem: Copy to xmodem: file system
ymodem: Copy to ymodem: file system
zflash: Copy to zflash: file system
aprompt#copy running-config
Who could tell me the minumum version to support scp URLs?
Thanks and Regards, ThomasIdeally any feature set questions are answerable in Cisco Feature Navigator (http://www.cisco.com/go/fn).
The Secure Copy (SCP) feature provides a secure and authenticated method for copying router configuration or router image files. SCP relies on Secure Shell (SSH), an application and a protocol that provide a secure replacement for the Berkeley r-tools. So ideally you should be running crypto images (k9) which support SSH and hence SCP as well.
But following are some details about SCP, which may be helpful :
Feature Name
Releases
Feature Information
Secure Copy
12.2(2)T12.0(21)S
12.2(25)S
This feature was introduced in Cisco IOS Release 12.2(2)T.
This feature was integrated into Cisco IOS Release 12.0(21)S.
This feature was integrated into Cisco IOS Release 12.2(25)S.
The following commands were introduced or modified: debug ip scp, ip scp server enable.
Following is details Feature Information for Secure Shell Version 2 Support:
Feature Name
Releases
Feature Information
Secure Shell Version 2 Support
12.2(11)T
12.2(25)S
12.3(4)T
15.3(2)S
The Secure Shell Version 2 Support feature allows you to configure Secure Shell (SSH) Version 2 (SSH Version 1 support was implemented in an earlier Cisco IOS software release). SSH runs on top of a reliable transport layer and provides strong authentication and encryption capabilities. SSH version 2 also supports AES counter-based encryption mode.
The following commands were introduced or modified: debug ip ssh, ip ssh min dh size, ip ssh rsa keypair-name, ip ssh version, ssh.
Secure Shell Version 2 Client and Server Support
12.0(32)SY
12.3(7)JA
12.4(17)
The Cisco IOS image was updated to provide for the automatic generation of SNMP traps when an SSH session terminates.
SSH Keyboard Interactive Authentication
12.2(33)SXH3
12.4(18)
The SSH Keyboard Interactive Authentication feature, also known as Generic Message Authentication for SSH, is a method that can be used to implement different types of authentication mechanisms. Basically, any currently supported authentication method that requires only user input can be performed with this feature.
Secure Shell Version 2 Enhancements
12.2(50)SY
12.4(20)T
15.1(2)S
The Secure Shell Version 2 Enhancements feature includes a number of additional capabilities such as support for VRF-aware SSH, SSH debug enhancements, and DH Group 14 and Group 16 exchange support.
In Cisco IOS 15.1(2)S, support was added for the Cisco 7600 series router.
Note
Only the VRF-aware SSH feature is supported in Cisco IOS Release 12.2(50)SY.
The following commands were introduced or modified: debug ip ssh, ip ssh dh min size.
Secure Shell Version 2 Enhancements for RSA Keys.
15.0(1)M
15.1(1)S
The Secure Shell Version 2 Enhancements for RSA Keys feature includes a number of additional capabilities to support RSA key-based user authentication for SSH and SSH server host key storage and verification.
The following commands were introduced or modified: ip ssh pubkey-chain, ip ssh stricthostkeycheck.
-Thanks
Vinod
**Encourage Contributors. RATE Them.** -
IPad supported iOS version for development
Hi, i have a reference iPad (1) for development, running iOS 4.2.1, now i need to upgrade to 4.3 for testing, but iTunes wants me to download the latest (5.1).
In Organizer i can see that supported iOS versions are:
Xcode Supported iOS Versions
6.0 (10A403)
5.1
5.0
4.3
How can i get the 4.3 and install on my dev iPad?
Anyone managed to do this?
Thank you.Not possible.
Older versions of iOS are not available once a new version is released.
***** but that's the way it is.
About the only thing you can do is find a device that has the version of iOS you want and purchase it. -
Is 5.1.1 really the latest iOS version for the original iPad?
I am trying to download the DirectTV app that comes up in the app store to my ipad and get message that iOS version 6.1 is required. In settings, the iPad is on version 5.1.1 and says the software is up to date. Is 5.1.1 really the latest OS for my iPad, meaning I cannot use the DirectTV online service?
So true.
Apple controls the iTunes store and decides what apps get in. They could force app developers to have their apps work with older iOS systems, but instead, it's in apples best interest to force you to go buy a new tablet every three years. Apple doesn't care that iPad1 owners are the ones that made the tablet successful for apple. If they cared about their customers, if they wanted brand loyalty, apple would offer to buy back ipad1s for a decent amount that could be put toward a newer iPad. Apple lost my business. If 'technology dictates' that I have to get a new tablet every three years, I'm gonna go with a less expensive other brand. -
What is the latest IOS version for my ipod
What is the lastest IOS available for my Ipod?
If it's a first generation model, 3.1.3.
If it's a second generation model, 4.2.1.
If it's a third generation model, 5.1.1.
Otherwise, 6.1.3.
(81365) -
HT4623 What is the most current iOS version for iPhone 3G?
I have an iPhone 3G, what is the most current iOS version? I have 4.2.1 and when I tried to update, iTunes says that I have the current version. I can't seem to download any apps with 4.2.1.
That is correct,
The last release of iOS to support the 3G model was 4.2.1, released on November 22, 2010
The 3G model is now 4 and half years old.
Maybe you are looking for
-
So I cant seem to print just the 1st of 5 pages. The default setting , 1 of 5, will print all 5 pages. The 2nd field can not be altered, as it could in previous FF versions, to 1 of 1. Therefore, I can only print all 5 pages, 2 through 5, 3 through 5
-
Macbook not recognizing mini dvi to dvi adapter
Hi, I have a 2011 macbook pro, i have been using the mini dvi to dvi adapter to connect to a dvi to hdmi cable into my tv. It has worked for the past 6 months since i have owned my mac but just recently nothing happens when i plug the adapter into my
-
Satellite C660-108 - No Automatic internet connection
I bought a replacement laptop last weekend - a Toshiba C660 - 108 - which is giving me a problem. I cannot get the computer to connect automatically to the internet router (Orange) as it fails to connect initially even though the network is always vi
-
Replication of masterdata from CRM 2005 to ECC and using filter
Hi all. My client have a certain account group configurated in crm. business partners for this account are automatically entered in the CRM system via upload. This business partners should NOT be replicated to ECC. I thought this was a peace of cake
-
Can I fax with a cable modem?
Using my Mac's built-in software/hardware, is it possible to fax a document from my computer's desktop by way of high-speed cable modem?