Minimum l Stock level

Guru
My client as maintained the Minium level stok in MRP2 view in material masterIs it posiable to to issue the material below level if not is their special setting or configration is their
Pl guide me i
Thanks
Sudhir

Hi Sudhir,
You can very well issue the stock.
The field just states the miminum safety stock to be maintained.
I hope u r using Re-order point Planning and during MRP run new order proposals will be created only the stock falls below re-order point.
Regards
Ramesh Ch

Similar Messages

Inventory Report for current stock and Safety, Minimum etc stock levels

Hi,
Is there any report available to view the current stock against the minimum, safety stock levels so that the user can plan further actions accordingly. Can anyone please guide me on this.
Thanks in Advance.
Regards,
Laxmi

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Minimum stock level

Hi all,
        My scenario comes like this ...i have two service center"A" and "B"where i ll maintain some minimum stock level of spare parts.
       each service center will get service arder individually for spare parts.service center's issue spare parts against order from minimum stock level. so i maintained make to stock scenario where order is full filled with minimum stock level.so planning has to cover minimum stock level.so i mapped in safety stock.
      But the safety stock level varies with some period.so i need an upload program of safety stock in period oriented manner.
      then fullfillment of service order also based on priority wise .becas spar parts for that sevice center are obtained from some other plant ...which should maintain a plan which determaine priority to give spare parts to "A" and "B" in percentage of priority
so i require 1.how to go for upload of safety stock with periodically?
                  2.How the priority can be given for allocation to verious service center.?\
Regards
suresh

Hi,
For upload the safety stock you can use BDC or LSMW.
for periodic upload try through background program with the help of ABAPer.
Regards,
Nilesh

Access Right for Minimum stock level

Hi all,
I would like to know if there is a way to set access right to enalbe or disable user from modify the minimum stock level in the item master data.
Thank you.
Regards

I would like to know if there is a way to set access right to enalbe or disable user from modify the minimum stock level in the item master data.
as I have said, you can use SP_TN to disable some certain users to modify the minimum inventory level value. here is an example:
IF @transaction_type IN ('A', 'U') AND
@Object_type = '4'
begin
if exists (SELECT distinct t0.docentry FROM oitm T0 INNER JOIN oUSR T1 ON T1.internal_k
= t0.usersign
WHERE isnull(t0.minlevel,'') <> '0' and t1.user_code = 'manager')
begin
select @Error = 10, @error_message = 'Min level can not be updated by user manager'
end
end
but I also said that you can use SDK code i.e. SAP B1 addon to disable the users to modify the minimum inventory level field. It is more complicated because you need to use programming language e.g. VB.Net to do that. The programming language will use the B1 DI API as project reference.
You must have SDK development license to develop such addon.
JimM

Minimum stock level per warehouse and MRP

Hello experts
We have tested minimum stock level per warehouse and try to use it for the MRP but it seems that the MRP uses for a specific warehouse the consolidated minimum level
For example
WSE 1 minimum stock level 10
WSE 2 minimum stock level 5
MRP runs for WSE 2 recommandation is calculated based on 15 pieces of minimum stock level (WSE 1+2)
Could you please tell me if this is normal behavior and the use of minimum stock level per warehouse is not possible ?

Hi.....
SAP gives recomendation on Overall stock basis and not on Minimum Inventory of Particular Warehouse.
It is standard behavior. But SAP should think of it as it is not right recomendation if someone tries to view it as per warehouse.......
Regards,
Rahul

Report from system on different stock levels-min, max stock levels

hI gURUS,
Is there any Standard Report from SAP system to see on different stock levels-minIMUM stock, maximum stock levels

Hi,
MMBE will not give stock level min and max that is maintained in material master MRP view. I think you need to make a z report for th same or may be through query.
Regards
Sangeta

Minimum & maximum stock for Material

Hi Team,
Here my client required to keep his stock in the form of Minimum & maximum stock for Material.
Let me explain with an example.
Material =Pen
In Stock it should be always 5 & maximum 10, when it falls below 4 it should generate PR & should not cross maximum limit 10.
if in stock 3 pens r there it should generate PR for 7 , If 4 then PR for 6
Please help me for it ASAP.
Regards
Mahantesh

Hi Mahantesh,
For this you need to maintain below settings in material master for your material.
In MRP1 view,
Define MRP Type: V1
Define Reorder Point: 5
Define MRP Controller:
Lot Size: HB (Replenish to max. stock)
Define Maximum stock level: 10
After this material master settings in MRP 1 view, test the results by running MRP for the material.
Keep the stock at different levels like 3, 4 and 6 for the material before MRP run.
You will get the results as per your business requirements.
Regards,
Naresh

Minimum safety stock

Hi,
I maintained minimum safety stock as-50 in MRP2 view while creating material master, my client requirement is this minimum safety stock should not be issued at any cost, without enhancement from abap consultant i need to maintain this safety stock.
can anyone help me to cose this issue.

Hi,
Minimum Safety Stock
The quantity that defines the lower limit for safety stock. This value cannot be exceeded.
Use
Defining a lower limit can influence the following:
material master data maintenance
The safety is checked to see if it is greater or equal to this lower limit.
forecasting
The lower limit is checked if you use an availability indicator which shows, according to customizing settings, if the safety stock is to be calculated again in a forecast.
If the safety stock is lower than this level in forecasting, the safety stock is automatically increased to the value of the lower level.
Dependencies
The safety stock must always be greater or equal to this lower level.
Hope this helps.
Revert if you need more details.
Regards,
Tejas

Approval hierarchy to issue Minimum safety stock

Hi Guys,
We have a requirement to have an automated approval hierarchy for issuing the inventory below a safety stock limit defined. How can we achieve that. I know that there is some option as "minimum safety stock" in SAP, but we need that a workfklow to be activated when the stock reaches to this level and only after approval it should be allowd to be issued. Is it possible to implement?

Hi,
There is no approval concept in this case. But you may check the below work around, Activate availability check for the material. Then you may maintain the message M7181 as user specific and maintain it as error message for the users who are NOT supposed to issue the goods below the safety stock. Refer the thread: message to be make error for specific user id
You may create a program to find the materials with stock equal to safety stock and send the result. You may schedule the job in background with specific interval. Also refer the thread: Material alert workflow
Regards,
AKPT

What minimum Support Package level is needed in BW 3.5 / 640 to be able to

Hello Experts,
A quick question:
what minimum Support Package level is needed in BW 3.5 / 640 to be able to run the SAPGUI 7.10 (including BW add-ons)?
I am also searching at my end.
<removed_by_moderator>
Read the "Rules of Engagement"
Best Regards
Sachin Bhatt
Edited by: Juan Reyes on Jun 29, 2009 11:15 AM

Hi,
Refer the below link
https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=30625
A. FEP stands for Front-End Patch. FEPs are the patches that SAP releases for the BW front-end components of the SAP GUI.
They can be downloaded from the SAP Service Marketplace (SMP login required), browsing to the following locations:
BW 3.5 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BW 3.5 ADDON FOR SAPGUI 7.10-> Win32.
BW 7.0 Addon can be found at Downloads -> SAP Support Packages and Patches -> Entry by Application Group -> SAP Frontend Components -> BI ADDON FOR SAPGUI -> BI 7.0 ADDON FOR SAPGUI 7.10-> Win32.
Let us know if u have any issues.
Regards,
Ravi

Restrict PO based on the maximum stock level qty in MMR

Hi
We have maintained Maximum Stock level in MRP1 in Material Master. Is there any facility which can restrict the Purchaser, not to raise any PO more than maximum stock level qty which is maintained in Material Master ??? how to do ?
Is there any user exit or warning mesge settings?
Edited by: Jayakumar Raju A.S on Jan 13, 2010 8:55 AM

If you want do such check then you have to do that in a userexit.
I am personally the opinion that a purchaser does not extend the PO quantity just for fun. Maybe he gets a better price if he procures a little more. It is probably a lack of training and knowledge about each others work, that a buyer does not understand what the maximum stock level is , and the planner may not understand the particular issues a buyer deals with daily.
Bring those two together an let they explain each other the reason for the maximum stock level and the reason why the order quantities are changed. Maybe they will finally change the maximum stock level, maybe the buyer will not change the quantities anmore without discussing it first with the planner......

Customer consignment stock- REPORTING stock level & goods depatched

Hi all
I'm looking for a report (or reports) which shows the following (bare in mind that this will all be customer consignment stock):
- the delivery numbers
- the previous month's stock level
- the quantity of goods despatched the following month with a rolling calculation
- monthly invoice values
- remaining stock levels (after current months goods have been issued and invoiced)
I'm aware that MMBE/ MB58 shows the current stock levels, however I'm hoping there is a report in SE16 which shows it as a report structure.
I understand that this is a lot of info requested by myself however any information would be appreciated.
Thanks
/ Vicky

Dear tortyv,
As per my understanding of the requirement,
You please check the "VL06" report if it satisfies your requirement you enter the execution parameters and execute.
System will give the list of out bound deliveries. Select one of those and click the details icon (ctrlshiftf3) according to the item view or headder view.
If it does't suit you have to go for z report.
I f you want that please provide the input fields in order to fetch the required data for the report.
Thanks&Regards
Raghu.k

Maximum Lot Size & Maximum Stock Level

Hi All,
In MRP 1 view we have Max Lot Size & Max Stock level, how the system give me requirement if i'm maintaining these fields.
Regards
Ashok

Hi Ashok,
If you mainatain Max lot size system will check for this qty & it will not allow to generate PR or planned order more than this qty in MRP run & Max stock level is the stock for replinshment where lot size if replinishing.
Regards
Rang

Goods Issue to increase the stock levels in a plant

Folks,
I am not a MM guy and I am trying to increase the stock levels in a plant using a Goods issue.
1.     Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
2.     What are the relevant movement types when GI is made w/o reference to a Purchase Order?
3.     Can GI be made with reference to any other entity/object other than PO?
Thanks

1. Can I do the Goods Issues without reference to a Purchase Order? If so, how can I do this
No u can't ..u have to do Goods receipt for a PO
Raise a PO for the same material and do GR
2. What are the relevant movement types when GI is made w/o reference to a Purchase Order?
u cant do GI for PO
3. Can GI be made with reference to any other entity/object other than PO?
GI aganist cost centre, production order, reservations ....
the easier way to bring in stock of a material is to do intial entry thru MB1C with mvt type 561.

Use of max stock level w/o lot size HB

hello champs..
need a help on below functionality
Can I have the functionlity of max stock level without using "lot size - HB" in material master.
my requirement..tht system should not create any procurement proposal if stock reachs at max level..
but with this i am using min lot size also..and this functionality got vanish if I use "lot size=HB" ..system dont see min or max lot size..it just create the proc proposal for the qty upto max stock level..
my requirement
for a material max stock level -100
min lot size - 50 , max lot size 80
and if my stock is 30 ,and my reuirement is for 80..system should not cross the max stock level and should create the prc proposal for 70 only..
pl share your thoughts on this..I'll appriciate wih necessary reward points..
Br
Sumit

Hi
thanks for reply..but i am not sure whther w/o using HB max stock level will be considered or not..
i yet have to test the same but as per SAP , if you want t maintain themax stock level in the plant , lot size should be EX
is this undertsnding is okie..
thx in advance
BR
Sumit

Minimum l Stock level

Similar Messages

Maybe you are looking for