Minimum length when sharing to disk?

Hello forum,
I'm trying to save single drum-beats from s/w drum-sets as I want to build my own, using the "best" sounds from the several I've got.
So I make one 1/4 note for the sound I want (one beat on a snare, f ex) and I set the yellow circle-ribbon to that exact 1/4 and I share as mp3.
And the mp3 is empty. No sound. Nothing.
I also tried to repeat the beat several times but then there was an added silence of two seconds in the beginning of the mp3... This never happened before.
(All mp3s I've made start immediately)
Anyone knows why? Or at least have a solution?
Is there a minimum time for recording? Two seconds?
Thanks In Advance,
Ava

Ava Tar wrote:
YES! That made it.
great
How do you come to think of solutions like that???
six and a half years of beating on GB ;-)>
Thank You!
you're welcome, enjoy

Similar Messages

How the cluster works when shared storage disk is offline to the primary ??

Hi All
I have configured Cluster as below
Number of nodes: 2
Quorum devices: one Quorum server, shared disks
Resource Group with HA-storage, Logical host name, Apache
My cluster works fine when either the nodes looses connectivity or crashes but when I deny access for primary node ( on which HA storage is mounted ) to the shared disks.
The Cluster didnt failover the whole RG to other node.
I tried to add the HAstorage disks to the quorum devices but it didnt help
Anyways i can't able to do any i/o on the HAstorage on the respective node
NOTE:This is the same case even on Zone cluster
Please guide me, below is the O/P of # cluster status command === Cluster Nodes ===
--- Node Status ---
Node Name Status
sol10-1 Online
sol10-2 Online
=== Cluster Transport Paths ===
Endpoint1 Endpoint2 Status
sol10-1:vfe0 sol10-2:vfe0 Path online
--- Quorum Votes by Node (current status) ---
Node Name Present Possible Status
sol10-1 1 1 Online
sol10-2 1 1 Online
--- Quorum Votes by Device (current status) ---
Device Name Present Possible Status
d6 0 1 Offline
server1 1 1 Online
d7 1 1 Offline
=== Cluster Resource Groups ===
Group Name Node Name Suspended State
global sol10-1 No Online
sol10-2 No Offline
=== Cluster Resources ===
Resource Name Node Name State Status Message
global-data sol10-1 Online Online
sol10-2 Offline Offline
global-apache sol10-1 Online Online - LogicalHostname online.
sol10-2 Offline Offline
=== Cluster DID Devices ===
Device Instance Node Status
/dev/did/rdsk/d6 sol10-1 Fail
sol10-2 Ok
/dev/did/rdsk/d7 sol10-1 Fail
sol10-2 Ok
Thanks in advance
Sid

not sure what you mean with "deny access" but could be reboot of path failures is disabled. This should
enable that:
# clnode set -p reboot_on_path_failure=enabled +
HTH,
jono

Error when adding a disk to Cluster Shared Volumes

When adding a disk to Cluster Shared Volumes via Failover Cluster Manager, I get a couple of errors.
Event ID 5145 in System Log:
While adding the disk ('Cluster Disk 1') to Cluster Shared Volumes, setting explicit snapshot diff area association for volume ('\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\') failed with error 'HrError(0x8004230d)'. The only supported software snapshot
diff area association for Cluster Shared Volumes is to self.
Cluster disk resource 'Cluster Disk 1' failed to delete a software snapshot. The diff area on volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\' could not be dissociated from volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\'. This
may be caused by active snapshots. Cluster Shared Volumes requires that the software snapshot be located on the same disk.
Any ideas why I'm getting this error? This disk was previously added as a CSV to different Windows failover cluster, if that matters. Thanks.

Hi,
As the disk was previously used as a CSV, I assume there is still data on it.
Please check if any VSS snapshot created on that disk. If so, delete them and re-add it as a CSV to see the result - a quick way is to backup important files and perform a re-format if you cannot confirm.
If you have any feedback on our support, please send to [email protected]

HT1198 I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

I shared disk space and my iPhoto library as described in this article. When creating the disk image, I thought I had set aside enough space to allow for growth (50G). I'm running out of space. What's the best way to increase the disk image size?

Done. Thank you, Allan.
The sparse image article you sent a link to needs a little updating (or there's some variability in prompts (no password was required) with my OS and/or Disk Utility version), but it worked.
Phew! It would have been much more time consuming to use Time Machine to recover all my photos after repartitioning the drive.

Owb error while edit a mapping:the minimum length of this field is 1

after creating a mapping,an error always occur when i attemp to
edit it just as add a mapping table,the error description is:
the minimum length of this field is 1 and its maximum length is
15,You have 19 characters.
can some one help me?thanks

Hi Vidyanand,
Did you create the runtime access user using the runtime assistant? Did you select the correct runtime repository (if you have more) to associate your runtime access user with?
Note that there are 4 database roles being created when you create a runtime repository owner:
- OWB_A_<runtime repository owner>
- OWB_D_<runtime repository owner>
- OWB_R_<runtime repository owner>
- OWB_U_<runtime repository owner>
If you would grant those roles to a user, then that user becomes an access user for the user with username <runtime repository owner>.
Note that you can also use the runtime repository credentials to connect to the runtime repository for deployment purposes, but you may not want that because of security concerns.
Thanks,
Mark.

When sharing iMovie11 project with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list). Finalize issue?

When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
Option File - Finalize Project gives inmediately the same errormessage.
Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
Please advise, thank you!

Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
Please advise, alko80

Error -50 when sharing a project

I get this error message when sharing my iMovie project:
Unable to prepare project for publishing. The project could not be prepared for publishing because an error occured (-50)
I've tried saving to a different location on my HD, I've tried reducing the res (I tried the three highest res as this is for a tv monitor) of the exported movie, I've repaired permissions. I exported this projecet perfectly the first time I made it - I need to change one thing in it and now get this!
I'm using the friendship movie trailer theme on iMovie 11 (9.0.4), OSX 10.6.8 on a MacPro 2.66ghz Quad-Core Intel Xeon with 16gb RAM and 3x1.5tb internals

Hi
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

IDVD error message when sharing from imovie

1. When "sharing" from imovie to idvd, error message appears reading: "unable to publish project due to error-41."
2. Successfully "shared" once, with the first clip upside down.
Thank you for your insights.

Hi
Most probably it's the Start-Up/Boot/Mac OS hard disk that has less than 5Gb free space.
To let iDVD run OK - This Start-up hard disk should have 25Gb or more due to that
Your Mac is running a sort of UNIX (Mac OS) and this makes Mac OS and iDVD to use
lot's of temp files - AND they can not be addressed to any other hard disk at all.
More RAM - will not help
External/Second hard disk will if You first formatte it as Mac OS Extended and
move material over to this (or use it as Start-up hard disk)
External Start-up hard disk must be FireWire - NO USB2 will do this.
Must be Mac OS Extended formatted
Western Digital - My Book Serie - Can't do this.
My Lacie - works gladly as secondary start-up hard disk.
Yours Bengt W

ISCSI shared virtual disk

Hey,
I had on my synology a iSCSI Lun created. Now I connect this iSCSI lun with my Windows Server 2012R2. Create on this connection a VHDX virtual harddisk.
When I try to ad this vhdx file to an VM as shared disk I become the error that the storage is not the right for shared virtual disk.
Thanks for help
Stefan
Viele Grüße Stefan
Kontakt unter [email protected]

Hey,
I had on my synology a iSCSI Lun created. Now I connect this iSCSI lun with my Windows Server 2012R2. Create on this connection a VHDX virtual harddisk.
When I try to ad this vhdx file to an VM as shared disk I become the error that the storage is not the right for shared virtual disk.
Thanks for help
Stefan
It does not work this way... Making long story short you need to connect to LUN, create CSV on top of it and create shared VHDX there. For details see:
http://blogs.technet.com/b/storageserver/archive/2013/11/25/shared-vhdx-files-my-favorite-new-feature-in-windows-server-2012-r2.aspx
http://www.aidanfinn.com/?p=14936
http://technet.microsoft.com/en-us/library/dn265980.aspx
Hope this helped! Good luck! :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

Shared Virtual Disk

When creating a virtual shared disk oracle VM Manager -> Resources -> Shared Virtual Disks the only option you have are
Virtual Disk Name:
Virtual Disk Size:
Server Pool name:
Group Name:
Description:
My question is how do you know what this virtual disk is mapped to? i.e. SAN, NFS, LOCAL DISK?
Also how do you specific what disk to use ideally I would like the virtual disk to use a 150GB LUN from my SAN?

With the exception of multipath devices (and plain files obviously), there is no user interface for other kinds of devices for back end storage for DomUs, but Xen supports them. You have to edit the config yourself. They are in /OVS/running_pool/<name>/vm.cfg
Look for the disk = line and edit it to something like this:
disk = [
'phy:/dev/DomUDisk2/LVOracleApp,xvda,w',
In this case, I used a local LVM logical volume as back end storage (/dev/DumUDisk2) and I mapped it to the paravirtual device in the vm (xvda). You have to do something similar. I don't have a SAN/HBAs, but assuming your LUN shows up on Dom0 as /dev/sda, you might give a try to something like:
disk = ['file:/OVS/running_pool/myvm/System.img,hda,w', # or whater you want to do for the boot/root disk
*'phy:/dev/sda,xvda,w',* ]
Once this works, you might want to configure multipath if your hardware supports it.
Best of luck, keep us posted.

Shared virtual disks and linux installation

Dear all,
when i add some shared virtual disk to the virtual machine and start the instsallation of oracle linux i face a major performance issue and the system takes a long time to boot and linux cd's and start the instsallation process, i don't know why this issue is happening to me but it is giving me alot of troubes. i had to buy a new machine with husge configuration to try oracle VM and i feel like i bought for no benifits at all
your help will be appreciated/

Avi,
Actually, if you have one server HA would do nothing for you. You need at least two servers for HA to be useful.
Also I would believe that since you only have one 500 gig drive I am sure it is a sata drive that you are using. That drive is running your Dom0 plus all other DomU's. The shared drive is a file on the filesystem under the /OVS directory your DomU system drive is a file on the /OVS filesystem. While your experience is still a little odd it would run but be really slow. You say that without the shared drive it runs OK so my first thought would be to drop the shared disk and recreate it since it sounds like you have nothing on it at this point in time anyway.
Could be that the file for the shared disk became corrupt with something else you had done.

Hitting iMovie 'application memory' limit on MacBook Air when sharing to file)

Hi Folks,
I'm running iMovie 10.0.1 on a 2011 MacBook Air (2x2 GB DIMM capacity), with Mavericks. I now have 3 edited HD projects there, varying in length from 26 min to 37 min.
I'm able to 'share' any two of these to MP4 files (on an external drive), but I only get two thirds though sharing the third project when I hit an 'application memory' limit, at which point everything freezes.(The same thing happens when sharing to 'Theatre').
I notice that all three projects and their associated 'Events' 'load' when I select 'Projects' in the library (presumably from the external drive to the iMovie application on the MacBook Air drive).
Is there some way to restrict this loading of everything in the library to a single selected project and associated event? Maybe I should move the whole app to the external drive?
Apple tells me that I can't double the DIMMS to the 2013 8 GB level.
Cheers,
Alan
(PS How would you like to be playing tennis in the Aussie Open - it's 44 degrees here today!).

G'day again Geoff,
I did as you suggested above, viz, isolated the remaining event and project from those that have successfully shared (rendered) earlier, by segregating the latter to a separate library in an external drive, leaving only the target event and project on the MBA's flash drive's iMovie library. (My 2011 Air has 4 GB of non-upgradeable RAM).
I confirmed that there were no other apps running, tidied up with 'CleanMyMac', 'MemoryClean' and 'DiskDoctor', and again tried sharing the remaining HD project to file (and later, to Theatre), but as before, iMovie quit halfway through, with a 'run out of application memory' message.
I then tried sharing to file at progressively lower resolutions, but unexpectedly, this didn't help.
Even though an earlier project of similar size (about 30 min) from the same event shared to file successfully, at full HD, I'm making no headway with this one. It 'plays' normally when opened in iMovie, but........?
What haven't I thought of here?
Cheers,
Alan
PS We wound the temperature back for Andy Murray, just to help him along into the quarter finals. He's on his own from here against (probably) one of Rafael Nadal, Novak Jokavic and Roger Federer. All four are very popular here (but I'd like to see Andy notch up a grand slam win here in Melbourne. (A little colonial loyalty perhaps?)

Minimum length for stills ?

Hi everybody,
I wanted to import stills in a movie in a way that they would not look so much as stills.
I thought I would reduce the length of time to 1 sec.
When I wanted to render that part (a few images) I got a message saying "general error"
Is there a minimum length of time required for the stills ?
thanks in advance
Ivan

RVB? You mean RGB?
From the original picture that I import, and which is about 5 minutes, what is the best way to reduce the length to a few images ?
I don't understand. Pictures don't really have a LENGTH. I mean, FCP can import them as 1 frame or 5 min....and that is in the User Prefs. But reducing the original picture to a few images...that throws me. The picture...a STILL picture, is ONE image. So how can you reduce ONE image to a few images?
Shane

Have a macbook pro running osx lion, connected a kindle fire using micro usb to transfer pictures and the disk icon won't show up on the desktop. When I ran disk utilities the kindle does show up there. Any thoughts as to why it's not recognizing?

Have a macbook pro running osx lion. Connected a Kindle Fire using micro usb and the disk icon doesn't show up on the desktop. Also sometimes get a message sayiing computer doesn't recognize device. When I opened disk utilities the Kindle disk does show up there. What am I missing?

cashworth wrote:
Kindle is connected directly, not thru a hub. Also called Amazon Kindle support, tech was baffled when I told her I was using a Mac. She said, "I'm not really familiar with apple products."
Precisely why it's not an iPad, and why it doesn't cost very much. An Apple rep would tell you how to connect an iPad to every computer.
Go here: http://www.amazon.com/gp/help/customer/display.html/ref=sv_kinh_9?ie=UTF8&nodeId =200127470

Setting minimum length of a text field

Forms [32 Bit] Version 10.1.2.3.0 (Production)
Oracle Database 10g Enterprise Edition Release 10.1.0.3.0 - Production
With the Partitioning and Data Mining options
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.5.0 (Production)
Oracle Procedure Builder V10.1.2.3.0 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.3.0 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.5.0 Production
Is there a way to set the minimum length of a text field without using a trigger?
for example. I have a field called journal_no varchar2(7), I want to enforce that at least 4 characters are entered.

In order to set a text item to a minimum value, you need to set the format mask.
In my case it was
AAAA
and i was wrong...!!!!
that just limits the number of characters to 4, i want at least 4, back to the drawing board......
Edited by: DM on Jan 27, 2010 11:39 AM

Minimum length when sharing to disk?

Similar Messages

Maybe you are looking for