Minimum Patch for 11.1.0.6

Hi All
what is the minimum patch level needed for Oracle 11.1.0.6 running on Solaris 10 ?
i have no access to metalink.
thanks
Arun

user636357 wrote:
how about for solaris .... i mean do i need to looks for any OS patches that needed for 11g?What about reading the doc about the software requirement :
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/pre_install.htm#CHDFFBIF
Nicolas.
PS : sorry, this link has already been provided earlier by Jean-Valentin, but you really should go through this doc.
Edited by: N Gasparotto on Jan 7, 2010 8:45 PM

Similar Messages

Errors on applying PSU patches for GI (Grid Infrastructure) 11.2.0.3

Need help!
This is all in the version of 11.2.0.3.   We created a single node GI with ASM by the user grid.   Grid home is /grid/product/11.2/grid/   And oracle home created by user oracle at /oracle/product/11g.    I have downloaded the GI PSU patch 16742216 for GI and Oracle DB PSU patch 16619892.   I just want to apply the patch to GI home, then Oracle home with different PSU.   Here is what I did after unzip the patch for GI:
1.   Stopped ASM instance and stopped listener (these are owned by grid)
2. Created a ocm response file at grid home by grid user:   $ORACLE_HOME/OPatch/ocm/bin/emocmrsp   -no_banner
3. Use the root to run grid profile to setup grid GI environment
4. Use the root to run as (as described in Oracle instruction): opatch auto /home/grid/patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp
But got this error.   For some reason it looks for Oracle home, not grid home, although I do not have any oracle home environment setup in root user:
===================================================================================================
lsildb10p|+ASM|/home/grid/patches $ opatch auto /home/grid/patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp
Executing /grid/product/11.2/grid/perl/bin/perl /grid/product/11.2/grid/OPatch/crs/patch11203.pl -patchdir /home/grid -patchn patches -ocmrf /grid/product/11.2/grid/OPatch/ocm/bin/ocm.rsp -paramfile /grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/crsconfig_params
/grid/product/11.2/grid/crs/install/s_crsconfig_defs
This is the main log file: /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-10_09-17-36.log
This file will show your detected configuration and all the steps that opatchauto attempted to do on your system: /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-10_09-17-36.report.log
2013-08-10 09:17:36: Starting Oracle Restart Patch Setup
Using configuration parameter file: /grid/product/11.2/grid/crs/install/crsconfig_params
The opatch minimum version check for patch /home/grid/patches/16619898/custom/server/16619898 failed for /oracle/product/11g
The opatch minimum version check for patch /home/grid/patches/16619892 failed for /oracle/product/11g
Opatch version check failed for oracle home /oracle/product/11g
Opatch version check failed
update the opatch version for the failed homes and retry
======================================================================================================
Where I did wrong?   Thanks for advice!

Thanks for the update. I have tried with chmod -R a+rwx on the patch location.   But got the error (different error). Here is long detail message in /grid/product/11.2/grid/cfgtoollogs/opatchauto2013-08-13_06-35-35.log
=====================================
Log file location : /grid/product/11.2/grid/cfgtoollogs/opatch/opatch2013-08-13_05-35-37AM_1.log
Invoking utility "saveconfigurationsnapshot"
UtilSession failed: UtilSession failed to generate configuration xml file [ PRKH-1001 : HASContext Internal Error
PRKH-3013 : An improper buffer argument was supplied to Cluster Synchronization Services ]
====================================
When I run the command as root, the ORACLE_HOME is set to /grid/product/11.2.3/grid/   which is the home for GI.
Then check in the log file: /grid/product/11.2/grid/cfgtoollogs/opatch/opatch2013-08-13_05-35-37AM_1.log
[Aug 13, 2013 5:35:38 AM]
OPatch was not able to create .patch_storage directory
Unable to get Environent variables for Stand Alone home

Solaris 10 - patch for new DST 2007 changes

I am trying to track down the one patch I need for the new standard for daylight savings time date changes that took effect in 2007. Each time I get one patch and read the readme file, it tells me I need another patch for the U.S. Energy Policy Act for 2005. I am just about to install Solaris 10 patch 119689-07. I don't need any other patch updates, just the bare minimum new DST patch. Thanks for your help.

119689-07 is obsoleted by 118836. http://sunsolve.sun.com/search/document.do?assetkey=1-21-119689-07-1
118836-36 is latest rev of this patch -- the kernel patch, whic has latest timezone data for the OS
You'll need to make sure java has latest tz data, too:
http://java.sun.com/javase/timezones/
As far as I know, these are the bare minimums for a system to function properly re: latest DST schedule

Problem when apply SAP Bundle Patch for 10.2.0.5

Hi,
We are trying to apply SAP Bundle Patch (SBP) SAP_102052_201102_SOL64.zip and SAP_102052_201103_SOL64.zip using MOPatch utility. Both MOPatch and OPatch utility have been updated with the latest download from SAP. When applying patch for SAP_102052_201102, most patches went through except for one patch that requires OPatch to be version 10.2.0.5.0. The OPatch version downloaded from SAP is 10.2.0.4.9. Even the OPatch delievered together in the SAP_102052_201102_SOL64.zip file is 10.2.0.4.9.
Below are extract of the opatch log file for this patch:
INFO:ApplySession applying interim patch '10248542' to OH '/oracle/DEV/102_64'
INFO:Starting to apply patch to local system at Wed Mar 23 10:49:25 SGT 2011
SEVERE:OUI-67073:ApplySession failed: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
INFO:System intact, OPatch will not attempt to restore the system
INFO:Finishing ApplySession at Wed Mar 23 10:49:25 SGT 2011
INFO:Total time spent waiting for user-input is 0 seconds. Finish at Wed Mar 23 10:49:25 SGT 2011
INFO:Stack Description: java.lang.RuntimeException: ApplySession failed to prepare the system.
Patch 10248542 requires OPatch version 10.2.0.5.0.
The OPatch version being used (10.2.0.4.9) doesn't meet the minimum version required by the patch(es). Please download latest OPatch from My Oracle Support.
Help appreciated.
Regards,
Lim

Hi,
I went to
http://service.sap.com/oracle-download
then
Oracle 10.2.0.5
then
OPatch
The file I can see there is generic for ALL operating systems and the name is:
OPatch_10205_Generic_v0.zip
it seems that the version is 10.2.0.5, not 10.2.0.4.9 as you mentioned.
I have downladed it and look at the README:
Patch summary:
README file for OPatch 10.2.0.5.0, the Oracle Interim Patching Tool.
I'm not installing it, but it seems that the version is not the same as yours.
Is this the one you have downloaded?
Have you installed it properly? => may be you are running an older one

Minimum patch level to be installed in 4.6 & ECC 6.0

Hi Experts,
Can anybody tell me what are the minimum patches or patch level to be installed while installing 4.6c and ECC 6.0?
Valuable answers will be rewarded.
Thanks in advance,
Suba

Hi,
   I am trying to find the 46D_EXT kernel but i am unable to find the same.The 46D_EXT kernel is not available under archives.
   The purpose for which i required the kernel is that i am upgrading a 4.6C, oracle 8.0.6.1, win NT system to ERP 2006. I want to do a system copy of the source system onto a hardware running windows 2003. This can only be done if i have the 4.6D_EXT as per the message above.
   Is there a better approach? According to my approach i will do a system copy onto a windows 2003 system --> upgrade oracle to oracle 10g ( using all the steps like first upgrade to oracle 8.1.7 then to oracle 9.2.6 then to oracle 10g) then i will proceed to upgrade the system to ERP 2006.
   Please advise.
Regards
Ankan Majumdar

Win7 IE8 compliance with 11i EBS - Interoperability patch for JRE plugin

Gurus,
I was just looking at note 290807.1 on metalink. One of the required patches is the ...
APPLICATIONS 11i INTEROPERABILITY PATCH FOR THE JRE NATIVE PLUGIN
After reading the "readme" about the patch, it doesn't exactly state it's purpose. Is this the patch which will allow both WinXP and Win7 to both utilize 11i EBS on the application server?
I need to make sure that once we upgrade, OA forms will still be available to our Win XP users. The note doesn't make any explicit statement about this.
Thanks,
Scott

Hi,
After reading the "readme" about the patch, it doesn't exactly state it's purpose. Is this the patch which will allow both WinXP and Win7 to both utilize 11i EBS on the application server?See these documents.
Note: 744241.1 - J2se 1.6.07 with IE7 Vista Prompts To Download OAJ2SE.EXE Again and Again
Note: 554598.1 - After Upgrading to the Latest JRE Plugin (note:290807.1) Applications Clients are Still Showing the Old Jinitiator Version.
I need to make sure that once we upgrade, OA forms will still be available to our Win XP users. The note doesn't make any explicit statement about this.The certification matrix for Microsoft Internet Explorer (IE) and Windows XP/Vista can be found in (Note: 285218.1 - Recommended Browsers for Oracle E-Business Suite 11i). So, there should be no issues if you meet the minimum requirements in this document.
Regards,
Hussein

6i on Solaris - minimum patch revision

Does anyone know where I can find the Forms Server 6i installation guide? It doesn't appear to be on technet.
I need to know the minimum patch revision levels for running 6i on Solaris 2.6/5.6
Also, has anyone ever run into this error:
kgepop: no error frame to pop to for error 0
thanks!

Application server (OAS 9i or earlier) can be istalled only on server (WEB Server machine).
For Forms/Reports you can install them on every workstation. But some enterprises prefer to install them on the server and somehow to give access to Forms/Reports Developer to every user.
looking in my archive I found the following for you (I copied it from one answer):
Platform Oracle8i/NT4.0 - Clients MS Windows (95, 98, NT)
We configure our clients so that Developer 2.1 (Forms, Reports, graphs) runtime code can be run
from
the network, rather having to install on each client PC. We paste the
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
key into the Windows registry of each client. The key contains the location of the Oracles files on
the file Server. This makes it very quick & simple to set up clients.
The problem is now we have the need for ODBC to be set up on the clients as well, for MS Access
connections
to the Database. I've pasted the registry key for the ODBC DSN onto the ODBC key but obviously more
is required. Has anyone got this done before?
No, I haven't done that for ODBC but it may be possible.
I agree with you that this network approach makes it easy to set up Oracle client machines.
Depending
on the speed of your server and your network though, the response time penalty for running Oracle
Forms
from a server can be significant. It is not difficult to install the Oracle client software on one
client, then replicate that to the other clients. The users may like the response times much
better
that way. Also, if you make any changes to Oracle Forms or especially to PLL files, you will not
be
able to deploy them on a server while anyone is using the application, if everyone runs it from the
server.

Minimum Patch Level Required to install Netweaver 7.0 and Portal

Hello Everyone,
We are currently on ECC6.0 and I need to know what the minimum Patch Level needs to be to install Netwever 7.0 and Portal.
Thank you,
Ahhsap

Hi,
As Sunny suggested, check if you have an existing portal instance.
If not:
Like I mentioned earlier, if you had upgraded ECC 6 to EHP4, then you need to install a separate NW EHP1 Portal. Since both your existing EHP4 ECC system and the new EHP1 portal are based on Netweaver 7.01 release, your systems will be in a consistent release level. It is recommended to install a separate Netweaver portal instance. SAP no longer recommends dual stack (abap + java) installations.
If you do have an existing portal instance, just upgrade the portal to Netweaver 7.0 EHP1 (if ECC is in EHP4) or latest SP for Netweaver 7.0 (if ECC is =< EHP3). I believe this can be done by either SAP EHPi or JSPM.
Cheers
Rishi

Latest Patch for SBS 6.5

I need to find out what the latest consolidated service pack version
number is for SBS 6.5. Could you also provide the link to download it, the
new "minimum patch list" "feature" novell implemented makes me want to
strangle someone at Novell.
Thank you.

Hi,
Joe Smith wrote:
>
> I need to find out what the latest consolidated service pack version
> number is for SBS 6.5.
Well, the latest SBS6.5 support pack is not part of a consolidated
service pack. <g> It's SP6
> Could you also provide the link to download it,
http://download.novell.com/Download?...d=J7J_dvKpjrI~
> the
> new "minimum patch list" "feature" novell implemented makes me want to
> strangle someone at Novell.
You're not alone.
Note that you should deploy some post-SP6 patches too. Read the details
here:
http://wiki.novell.com/index.php/Nw65sp6
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Patching for extended support baseline

Hello Gurus.
I am patching for minimum baseline extended support 11.5.10
Patch Wizard recommended around 20 patches for us to apply.
Now, some of the pre-reqs for some of these patches are for products we dont even have installed.
If I ignore these, will the patches that list them as pre-reqs fail? Or can I safely ignore them?
A specific example, would be this:
Patch 7651923: 11.5.10: BUG FIXES FOR CS: JAN 09 PATCH
is something Patch Wizard found for a missing patch for Extended Support.
This is superseded by
12772485: 11.5.10:BUG FIXES FOR CS: AUGUST' 11 PATCH
12772485 has a number or pre-reqs, some of which for products that we dont have installed.
Example: Field Service(CSF) Patch - 5758991
So, I am in the situation of having to apply patches to products we dont have installed. Is this possible? It makes no sense.
My feeling is that I can ignore this Field Service patch, but I am not 100% sure, hence my making an appearance here.
Any ideas out there?
thanks.
11.5.10.2
11.2.0.03
RHEL 5

Yes, it is common sense to think adpatch would skip it. But as that note says:
Note: A job should never be skipped during a patch application, regardless of the product's installation status, unless the product specific development team that supports confirms that it is harmless to skip the job.
So before applying these, I am waiting for the team from CS (Service product) that this patch - 12772485 - to confirm if I can skip it in applying the patch.
I will update this when the time comes.
Thanks,
DA.

AAC/MPEG-4 support patch for abcde

I got bored to day and made up this patch for abcde that adds support for AAC using the M4A extension.
It uses FAAC as the encoder and also patches abcde to version 2.2.3
I have not tested it yet so bear with me...i'll post my test results later.
You'll have to manually add the "M4AENCOPTS=" variable to the config
usage is: abcde -o m4a
UPDATED: fixed a plethora of typos
another side note is the fact FAAC must be compiled with mpeg-4 support, the Archlinux package for FAAC isn't, so therefore this could be a problem unless you compile FAAC yourself. I submitted a feature request to get mp4 support added.
the following is the 2.2.0 to 2.2.3 update+AAC patch. I will submit a AAC patch for the newest release to the developers of abcde later on.
--- abcde-old-2.2.0 2005-03-08 12:42:14.000000000 -0500
+++ abcde2 2005-03-08 12:11:07.000000000 -0500
@@ -11,7 +11,7 @@
# Copyright for this work is to expire January 1, 2010, after which it
# shall be public domain.
-VERSION="2.2.0"
+VERSION="2.2.3"
usage ()
@@ -21,7 +21,7 @@
echo "-1 Encode the whole CD in a single file"
echo "-a <action1[,action2]...>"
echo " Actions to perform (cddb,read,normalize,encode,tag,move,playlist,clean)"
-echo "-A Experimental actions (retag, transcode)"
+#echo "-A Experimental actions (retag, transcode)"
echo "-b Batch mode: enable album normalization and nogap encoding"
echo "-c <file>"
echo " Specify a configuration file (overrides system and user config files)"
@@ -366,6 +366,9 @@
mpc)
run_command tagtrack-$1 true
+ m4a)
+ run_command tagtrack-$1 true
+ ;;
esac
done
@@ -489,6 +492,10 @@
## FIXME ## to the encoder ends up empty.
run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $MPPENCODER $MPPENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" "$IN" "$OUT"
+ m4a)
+ # AAC/MPEG-4 format (.m4a) is done locally, with inline tagging.
+ run_command encodetrack-$OUTPUT-$1 nice $ENCNICE $M4AENCODER $M4AENCODEROPTS --artist "$TRACKARTIST" --album "$DALBUM" --title "$TRACKNAME" --track "$1" --genre "$CDGENRE" --year "$CDYEAR" --comment "$COMMENT" -w "$IN" -o "$OUT"
+ ;;
esac
done
# Only remove .wav if the encoding succeeded
@@ -737,6 +744,9 @@
if [ "$INTERACTIVE" = "y" ]; then
while [ "$DONE" != "y" ]; do
read ERASEPLAYLIST
+ if [ "$ERASEPLAYLIST" = "" ]; then
+ ERASEPLAYLIST=e
+ fi
case $ERASEPLAYLIST in
e|E|a|A|k|K) DONE=y ;;
@@ -764,7 +774,7 @@
ARTISTFILE=$(mungefilename "$TRACKARTIST")
# If we want to start the tracks with a given number, we need to modify the
# TRACKNUM value before evaluation
- if [ -n $STARTTRACKNUMBER ] ; then
+ if [ -n "$STARTTRACKNUMBER" ] ; then
# Get the trackpadding from the current track
CURRENTTRACKPADDING=$(echo -n $UTRACKNUM | wc -c)
TRACKNUM=$( printf %0.${CURRENTTRACKPADDING}d $(expr ${UTRACKNUM} + ${STARTTRACKNUMBER} - 1 ))
@@ -843,7 +853,7 @@
cdparanoia|debug)
if [ "$WEHAVEACD" = "y" ]; then
vecho "Querying the CD for audio tracks..."
- TRACKS=$( $CDROMREADER -Q 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
+ TRACKS=$( $CDROMREADER -d $CDROM -Q --verbose 2>&1 | egrep '^[[:space:]]+[[:digit:]]' | tail -n 1 | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
CDPARANOIAAUDIOTRACKS="$TRACKS"
else
if [ -f "$ABCDETEMPDIR/status" ] && checkstatus cdparanoia-audio-tracks ; then
@@ -1354,7 +1364,7 @@
EDITCDDB=n
fi
if [ "$EDITCDDB" = "y" ]; then
- CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d " " -f 1);
+ CDDBDATAMD5SUM=$($MD5SUM "$CDDBDATA" | cut -d" " -f1);
# Use the debian sensible-editor wrapper to pick the editor that the
# user has requested via their $EDITOR environment variable
@@ -1387,7 +1397,7 @@
# Some heuristics first. Look at Disc Title, and if it starts with
# "Various", then we'll assume Various Artists
- if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2 -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
+ if [ "$(grep ^DTITLE= "$CDDBDATA" | cut -f2- -d= | egrep -ci '^(various|soundtrack|varios|sonora|ost)')" != "0" ]; then
echo "Looks like a Multi-Artist CD" >&2
VARIOUSARTISTS=y
else
@@ -1470,7 +1480,7 @@
echo "variousartiststyle=$VARIOUSARTISTSTYLE" >> "$ABCDETEMPDIR/status"
if [ "$EDITCDDB" = "y" ] && [ "$UNINTENTIONALLY_ANGER_THE_FREEDB_PEOPLE" = "y" ]; then
- if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d " " -f 1) ]; then
+ if [ $CDDBDATAMD5SUM != "" ] && [ $CDDBDATAMD5SUM != $($MD5SUM "$CDDBDATA" | cut -d" " -f1) ]; then
# This works but does not have the necessary error checking
# yet. If you are familiar with the CDDB spec
# (see http://www.freedb.org/src/latest/DBFORMAT)
@@ -1577,7 +1587,7 @@
WAVDATA="$ABCDETEMPDIR/track$UTRACKNUM.wav"
OUTDATA="$ABCDETEMPDIR/track$UTRACKNUM.$OUTPUTTYPE"
if [ -r "$CDDBDATA" ]; then
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2 -d= | tr -d [:cntrl:])
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | head -n 1 | cut -f2- -d= | tr -d [:cntrl:])
echo "Grabbing track $UTRACKNUM: $TRACKNAME..." >&2
else
echo "Grabbing track $UTRACKNUM..." >&2
@@ -1692,6 +1702,7 @@
SPEEXENCODERSYNTAX=default
MPPENCODERSYNTAX=default
NORMALIZERSYNTAX=default
+M4AENCODERSYNTAX=default
OUTPUTFORMAT='${ARTISTFILE}-${ALBUMFILE}/${TRACKNUM}.${TRACKFILE}'
# Use the following VAOUTPUTFORMAT to revert to 2.0.x VA format:
@@ -1738,6 +1749,7 @@
SPEEXENC=speexenc
# mpp (Musepack)
MPPENC=mppenc
+M4AENC=faac
ID3=id3
ID3V2=id3v2
@@ -1773,6 +1785,7 @@
SPEEXENCOPTS=
# mpc
MPPENCOPTS=
+M4AENCOPTS=
ID3OPTS=
ID3V2OPTS=
@@ -2039,6 +2052,7 @@
spx) [ "$SPEEXENCODERSYNTAX" = "default" ] && SPEEXENCODERSYNTAX=speexenc ;;
mpc) [ "$MPPENCODERSYNTAX" = "default" ] && MPPENCODERSYNTAX=mppenc ;;
+ m4a) [ "$M4AENCODERSYNTAX" = "default" ] && M4AENCODERSYNTAX=faac ;;
*) echo "abcde error: Invalid OUTPUTTYPE defined" >&2
exit 1
@@ -2100,6 +2114,12 @@
MPPENCODER="$MPPENC"
esac
+case "$M4AENCODERSYNTAX" in
+ faac)
+ M4AENCODEROPTS="$M4AENCOPTS"
+ M4AENCODER="$M4AENC"
+ ;;
+esac
# and which tagger
@@ -2144,7 +2164,7 @@
${NEEDCOMMENTER+$VORBISCOMMENT} ${NEEDMETAFLAC+$METAFLAC}
${NEEDNORMALIZER+$NORMALIZER} ${NEEDEJECT+$EJECT}
${NEEDDISKTOOL+disktool} ${NEEDCDSPEED+$CDSPEED}
- ${NEEDVORBISGAIN+$VORBISGAIN}
+ ${NEEDVORBISGAIN+$VORBISGAIN} $M4AENCODER
do
# Cut off the command-line options we just added in
X=$(echo $X | cut -d' ' -f2)
@@ -2207,37 +2227,6 @@
esac
fi
-if [ "$STRIPDATATRACKS" = "y" ] && [ ! "$ONETRACK" = "y" ]; then
- case "$CDROMREADERSYNTAX" in
- cdparanoia|debug)
- # cdparanoia can query the CD, so let's process the TRACKQUEUE list with the results.
- if checkstatus cdparanoia-audio-tracks; then
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-audio-tracks )
- else
- ## FIXME ##
- vecho "Querying the CD to obtain a list of valid audio tracks..."
- $CDROMREADER -Q > $ABCDETEMPDIR/cdparanoia-query 2>&1
- # Obtain a list of valid audio tracks from the results of the query
- CDTRACKQUEUE=$( cat $ABCDETEMPDIR/cdparanoia-query | egrep '^[[:space:]]+[[:digit:]]' | awk '{print $1}' | tr -d "." | tr 'n' ' ' )
- fi
- # Obtain the track padding value from the before-processing list and pad the CD list
- TRACKNUMPADDING=$( echo $TRACKQUEUE | awk '{print $1}' | tr -d " n" | wc -c )
- for TRACK in $CDTRACKQUEUE ; do
- TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${TRACK} + 0 ))
- PADNEWTRACKQUEUE=$(echo $PADNEWTRACKQUEUE $TRACKNUM)
- done
- CDTRACKQUEUE=$PADNEWTRACKQUEUE
- # Now, compare if the values in the list are valid tracks in the CD
- for TRACK in $TRACKQUEUE; do
- if echo $CDTRACKQUEUE | grep $TRACK >/dev/null ; then
- NEWTRACKQUEUE="$NEWTRACKQUEUE $TRACK"
- fi
- done
- TRACKQUEUE="$NEWTRACKQUEUE"
- esac
-fi
# Create playlist if needed (backgroundable) and start reading in tracks
@@ -2446,7 +2435,7 @@
# TRACKNUM=$(printf %0.${TRACKNUMPADDING}d $(expr ${UTRACKNUM} + 0))
TRACKNUM=$UTRACKNUM
CDDBTRACKNUM=$(expr $UTRACKNUM - 1)
- TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2 -d= | tr -d [:cntrl:] | sed 's/ +$//')
+ TRACKNAME=$(grep ^TTITLE$CDDBTRACKNUM= "$CDDBDATA" | cut -f2- -d= | tr -d [:cntrl:] | sed 's/ +$//')
splitvarious
fi
fi
the patches can also be found here http://www2.rudefyet.com:8080/patch
please post any other issues you have

not yet, i'm going to work all the kinks out before i submit it
as of right now I noticed some major typos, on my part, that cause it to fail...i'm working on that right now

Not able to find out the OCT 2012 CPU patch for 11.2.0.3

Hi
I am trying to download the OCT 2012 CPU patch for the 11.2.0.3 to install on Linux x86-64 which is having OS of RHEL 5.7. I am able to get the OCT 2012 PSU patch which include the CPU patch too.
Database 11.2.0.3.4 PSU Patch 14275605, or
GI 11.2.0.3.4 PSU Patch 14275572, or
But I just require only the CPU patch. Can anyone provide me the patch number or some link where I can download the Oracle CPU patch OCT 2012

The given link take to the window where CPU patch for all the quarter available.
The Critical Patch Updates released to date are listed in the following table.
Critical Patch Update Latest Version/Date
Critical Patch Update - October 2012 Rev 1, 16 October 2012
Critical Patch Update - July 2012 Rev 1, 17 July 2012
Critical Patch Update - April 2012 Rev 2, 19 July 2012
If I click on Critical Patch Update - October 2012 its takes to the window for selectin the database version (11.2.0.3). From there it goes to the Patch Set Update and Critical Patch Update October 2012 Availability Document [ID 1477727.1] which I had already checked.
There for the database products it shows the below option.
Table 9 Patch Availability for Oracle Database 11.2.0.3
+*<moderator edit - deleted MOS Doc content - pl do NOT post such content - it is a violation of your Support agreement>*+
It doesnt have the sepreate CPU patch. The below CPU patch is for the OC4J. I had a check.
Thanks
SHIYAS M

Patch for modbin6-1.00.38.exe is out.. "2MBIOS.BIN can't open!" Solved.

Hi mates,
ive decide to make a patch for modbin6 1.00.38 to improve stability and minise risk of modding the BIOS. for users which is reading this post if never heard about MODBIN better avoid reading below. its nice program for basic BIOS mod, simple to use, but very danger in the same time couse mess with BIOS and inproperty using may couse disaster. im not gona advert or to invite persons to use it. just wana make this program to be used normally to bring stability and minise risk of making corrupted BIOSes.. for persons which is already using it and have experience with him or with person Enthu which is wana try it and they dont worry if mobo may caouse for trash. there is 2 reasons to making this patch.
1. couse sometimes im using it there is features on it wchich gives basic stuffs, unlocking hidden features locked by manifacturer(sometimes really usefull especially for DIMM Vcore..). so there is a nasty bug on it which gona explain later. most of persons who is using MODBIN know about it. so that patch will spend me alot of time and minimise risk of mistake during avoiding bug couse operation need several procedure and automatised will risk free and much fastern.
2. to bring ability for most stable operations to persons which is already using it when need.
but lets talk about the patch. everyone know that nasty issue with MODBIN(made it by Borg N1,part from his collection). bug is program wont safe BIOS file and quiting with Abnormal program termination.... gives this one message: !!!File
2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38 how nice ...
here is Borg N1 advices:
Quote from: Borg Number One on 16-July-05, 05:24:51
Hi.
It is a kind of sad fact that many users just know how to use the mouse and keyboard.
Well, you have to configure your config.sys (Win9x/ME) or config.nt to run MODBIN6
(e.g. MODBIN6 2.01.01 (06/25))
in Windows prompt/console without problems.
The " FILES " & " BUFFERS " values are the important values.
http://www.xtremesystems.org/forums/showthread.php?t=45538
http://www.xtremesystems.org/forums/showthread.php?t=63210&highlight=config.nt
+++ BNOBTC & BNOBLG +++
http://bnobtc.pix-art.com
Borg advices is good but unfortuanly doesnt fix that bug... seems author dont have much idea why this is happend...error is constant ... Pure DOS also can't help... i wana add few more tips to the Borg's ones to improve stability when using modbin, after that will talking about patch.
TIP: navigate to this folder and open config.nt file: %SystemRoot%\system32\config.nt
at the end of file add this ones:
dos=high, umb
device=%SystemRoot%\system32\himem.sys /CPUCLOCK:ON /HMAMIN=64
FILES=40
BUFFERS=40
STACKS=9,256 -----> Preserving 039A-045Eh 3,152 Sys 039Ah Stacks, 0552h DOSX
Also MODBIN doesnt work well with long filenames.... etc "document and settings\my profile\desktp\modblabla" if not gona work property and there is a big chance of failure will load but after saving will have problems to update BIOS "core"(original.tmp) so always use 8.3 syntax standart .... best way from root directory make subdir whcih name to no NOT exceed 8 symbols... etc C:\123,C:\MYFLASH,C:\ROFL
without TIPs it is really big gamble with BIOS....
Aslo that will prevent Stack Overflow error when BIOS is loading....
NOTE: To activate changes just quit from any DOS interpretators like(4nt,command.com,cmd and so on). and re-run it. Reboot OS is not requred.
here how to do:
Also when executing MODBIN put below executable file this ones without quotes "loadfix forcedos modbin6-1.00.38.exe"
and ofcourse nasty error is waiting us... "2MBIOS.BIN can't open!Thanks for using ModBin6 1.00.38"
Patch which iv maked gona RIP this error forever.
Download: modbin6_1.00.38
Download: MODBINPATCH
What patch need? and how to use it? I named patch "Dynamic Patch for modbin" Couse isnt make modification on MODBIN program but momory his parent process when is loaded into memory.
tips suggested below is recommended but not nesecery for the patch.. patch need MODBIN and your BIOS file (modbin6-1.00.38.exe and mybios.bin) to be copied to systemroot drive(usually C) in folder MSI etc put modbin6-1.00.38.exe and mybios.bin(BIOS which you gona mod) to C:\MSI
Patch make checking if folder doesnt match will not continue....
How to use it..... Copy modbin6-1.00.38.exe and mybios.bin to C:\MSI, then from command prompt navigate to C:\MSI and execute "loadfix forcedos modbin6-1.00.38.exe" after that load your BIOS file... when loading is complete navigate to your patch folder and execute patchMSI.exe.... takes 10 seconds to complete after that make active "white" window and enter "Q" then hit ENTER key both windows will be closed, after that return to your modbin window, make what you gona make and save BIOS file like normal procedure... Method is founded and tested by me from years below never let me down(never brings corrupted BIOS), but just today ive made patch couse was too lazy... also Borg's MODBIN can work with most of all chipsets which is using AWARD Modular based... NOTE: K9 isnt tested. the most of here you can view how exacly to do it and differents with and without patch:
here is one more think some time maybe usefull from me:D
Here is 1st little short trick:(no analog anywhere, like patch only here can be found if accepted):
How to reset BIOS if you have nothink? Examples if you are administrator/PC-support or any and must fix same PC but the BIOS has an password?! And you dont have permision to open Case to reset CMOS(couse PC has an sticker with Warantly (and removing that sticker couse lost pc warrantly) You need access to BIOS to re-check,configure somethink there but its password protected. anyway there could be many situation. what we need? nothink special just bootable DOS(or analog- PC-DOS or whatever,doesnt matter where will boot(cd,flash disk,hdd)), no extended commands.[io.sys(jo.sys),command.com] - files requred to boot Here we go:
boot from desired device.when you see command prompt etc.: "A:\,C:\"
We will write a program without any languich..directly in PC code..(without compilator), direct in machine code.
write this:
copy con ffs.com|ffs *comment None
176.230p144144230q195 *comment Hold "ALT" and write number
^Z *comment "CTRL+Z" then hit "Enter"
Explain:
copy(internal command)
con (command line switch)
^Z (CTRL+Z)
NOTE: Numbers in second line must be written with holdon "ALT" key and specified numbers.(ASCI Code). Non numbers symbols is normal keyboard selection. on input display should look like:
copy con ffs.com|ffs
░.цpРРцq├
^Z
Program is 9 bytes long... (simple but high effective)
Thats it.Reboot Computer... password is gone. CMOS is reseted to default values. Tested on Award 4.0,6.0, AMI BIOS. Break all..
and finaly again:
**To All readers of this thread: Please note that this thread is with regards to Self-Modding BIOS and are of NO Official Testings from MSI. MSI will not be responsible for ANY Damage caused from requesting these self modded BIOSes! Please mind that you'll ONLY request and flash AT YOUR OWN RISK!!!** also MODBIN Author(Borg N1) and me is dont are NOT responsible for ANY Damage caused by MODBIN or Add On Patch. (i didnt think there is risk exit must must said that warning....couse playing with BIOS is always risky). Happy Tweaking.

Well, I was wondering if the system not allowing the tty to change ownership -- but root also has the problem.
You might try checking which shell is set for your users in /etc/passwd, and then check that the shell really exists at the specified path, and that it is executable. You might also check that the home directory for you users (also specified in /etc/passwd) is mounted and your user has the appropriate rights to that directory.
Other than that, I am running out of altitude, airspeed and ideas all at the same time. There was one thing in your trace I did not understand. Why is your system looking to the floppy drive? I wonder if that is contributing to the problem.

Can someonoe please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra softw

Can someonee please assist me in my Adobe Photoshop CS6 Extended. I keep getting a 'Couldn't Complete Your Request because Dynamic Link is not Available?" Is there a way of getting a software patch for this problem? I thought you didn't need extra software. My software other than that problem works fine.

Couldn't complete what request? Way more information please.
What operating system?

How to set minimum size for the 'location' box in toolbars?

I reorganized my toolbars by merging the location and tabs bar. I have the location on the left hand side and the tabs *next* to it, like this:
[ (<)(>) [LOCATION] /tab\/tab\/tab\ ]
Unfortunately when the number of tabs increases, the location box becomes so small that I cannot even see the url of the site I'm in...
Is there a way to force a minimum width for the location box? I couldn't find a setting in about:config for it (I imagine that this would be a browser.urlbar setting)

You rock! The combination of fixed width tabs with the stylish Add-on, and the single line of script below just made my day!
#main-window[sizemode="maximized"] #TabsToolbar, #TabsToolbar > #urlbar-container { min-width: 350px; }
Many thanks!

Minimum Patch for 11.1.0.6

Similar Messages

Maybe you are looking for