Minimum Patch Level Required to install Netweaver 7.0 and Portal

Hello Everyone,
We are currently on ECC6.0 and I need to know what the minimum Patch Level needs to be to install Netwever 7.0 and Portal.
Thank you,
Ahhsap

Hi,
As Sunny suggested, check if you have an existing portal instance.
If not:
Like I mentioned earlier, if you had upgraded ECC 6 to EHP4, then you need to install a separate NW EHP1 Portal. Since both your existing EHP4 ECC system and the new EHP1 portal are based on Netweaver 7.01 release, your systems will be in a consistent release level. It is recommended to install a separate Netweaver portal instance. SAP no longer recommends dual stack (abap + java) installations.
If you do have an existing portal instance, just upgrade the portal to Netweaver 7.0 EHP1 (if ECC is in EHP4) or latest SP for Netweaver 7.0 (if ECC is =< EHP3). I believe this can be done by either SAP EHPi or JSPM.
Cheers
Rishi

Similar Messages

Minimum patch level to be installed in 4.6 & ECC 6.0

Hi Experts,
Can anybody tell me what are the minimum patches or patch level to be installed while installing 4.6c and ECC 6.0?
Valuable answers will be rewarded.
Thanks in advance,
Suba

Hi,
   I am trying to find the 46D_EXT kernel but i am unable to find the same.The 46D_EXT kernel is not available under archives.
   The purpose for which i required the kernel is that i am upgrading a 4.6C, oracle 8.0.6.1, win NT system to ERP 2006. I want to do a system copy of the source system onto a hardware running windows 2003. This can only be done if i have the 4.6D_EXT as per the message above.
   Is there a better approach? According to my approach i will do a system copy onto a windows 2003 system --> upgrade oracle to oracle 10g ( using all the steps like first upgrade to oracle 8.1.7 then to oracle 9.2.6 then to oracle 10g) then i will proceed to upgrade the system to ERP 2006.
   Please advise.
Regards
Ankan Majumdar

I'm trying to load avira free mac security, and am told i am not on patch level required, to update to latest patch level, what to do?

i'm trying to load avira free mac security and am told i am not on the patch level required, to update to latest patch level, what to do?

afickera wrote:
i'm trying to load avira free mac security ...
Please See Here > Antivirus Discussion
More Info Here > http://www.reedcorner.net/mmg/

Problem installing Netweaver 2004s EPC and EP on Windows MSSQL env

Hi,
I am attempting to install Netweaver 2004s EPC and EP in Java on Windows 2003 with MSS 2005 DB.
On phase "DB downtime configuration" "Changing location of tempdb files", we see the below error message.
FCO-00011 The step doTempDBBeforeRestart with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0|doTempDBBeforeRestart was executed with status ERROR .
I was unable to find anything is OSS notes or SDN that addresses this particular issue.
Your help is greatly appreciated.
Regards,
Rick Taylor

long story short:
xp (specially NOT the home version) is not among the supported operating systems to run any sap system...use either windows 2000 server or 2003 server
GreetZ, AH

Minimum SP level required in satellite system R/3 4.7E

Hi all,
In my landscape i am going to configure change request management. I know its possible to configure but here my doubt is that what is the minimum level required in satellite systems. Server Details are Solman7.0 level SP11 and satellite systems are R/3 4.7EE --> ST-PI 2005_1_700 13 and ST-A/PI leval is 0j1_crm500 0
Sugesstions are highly appreciated.
Regards
Madhu

Please check note 907768 - General note for Change Request Management ST 400
Markus

ECC patch level requirement for SNC 7.0 eph1

We are running ECC SR3 (w/o ehp) now and want to implement SNC 7.0 eph1.
Is there any official docuemnt to which I can refer regarding ECC hot package level requirement for SNC 7.0 eph1? We definately do NOT want to upgrade ECC patch level during SNC project.
If we must switch back to a lower version, such as SNC 7.0, is there a similar document?
Thanks in advance.
James

Dear James
See the SAP SNC Master Guide on SAP Service Marketplace at service.sap.com/instguides @ SAP Business Suite Applications @ SAP SCM @ SAP SNC
For SNC 7.01 go to using sap enhancment package for SAP SNC 7.0
For SNC 7.0 go to using SAP SNC 7.0
https://websmp101.sap-ag.de/support
At the bottom of the page, you can find master guide,
From page 27 section 2.3 Software Component Matrix, it is 90 page document
User details are required plz create one
You will find all the required information
Now if you want to check, realize scenario wise
In the same link, go to release & upgrade information-Product Availability Matrix and Realization Alternatives
THis is very good link
Notes
1180861 & 1281192 talks about 7.0
Best Regards
Vinod

Reg: hardware requirements for installing netweaver

hi expert's
hello expert's if suppose i want to install netweaver in a desktop system.
what will be the hardware requirements has to full filled.
regards
harikrishna.N

Hi Hari,
For Netweaver 04 :
MINIMAL CONFIGURATION: The SYSTEM should have
1) CPU: Dual CPU
2) RAM : 2 GB (Incase of single stack) & 4GB (For Dual Stack)
3) Storage space of atleast 80 GB (althoug it depends on the database usage and the kind of transaction you would be doing on them).
For details please refer the master guide / installation guide or may be you could also refer to the sizing documents.
Regards,
Prem

How to update ipod touch 3rd gen 64GB (A1318) to iOS 7. iOS 6 or iOS 7 required to install apps like youtube and soundcloud.

Hello Apple,
I have an iPod touch 3rd gen 64GB (A1318) and I wish to install apps like youtube and soundcloud from the app store. But most of the apps require iOS 6 or 7 for them to be installed into the iPod touch. So, how can update my iPod touch to iOS6 or 7. As the lasted update available is only iOS 5.1.1
Kindly help me to get the apps installed into my iPod touch.
Thanks.

That iPod touch can't be updated past 5.1.1. If desired, click here and try following the instructions.
(115536)

NetWeaver Development Studio and Portal Plugin

Hi
I just installed netWeaver Developer studio 2.0.3. It does not have a portal plugin . I was under the impression that it comes with PDK and Plugin , so that I can develop Java Iviews.
Do I have to install Portal plugin in netWeaver studio to develop Java iviews.
Is there any other version of Developer studio which comes with portal plugin.
What about PDK ?? Does it come with Developer studio 2.0.3.
I had problems before with Eclipse 3.0 and Portal plugin for EP6 SP2. Do I have the same problem with any version of developer studio or If i just install plugin for EP6 i will able to develop java iview.
Any help will be appreciated.
Regards
Bhanu

Hello,
You should update to a later version of the Studio (be careful to check if that version is in sync with your server) In the latest versions the PDK definitely is included.
Regards,
Benny

Requirements for installing SAP Web As and NWDS IDE?

Hi All,
Please give me details what are the requirments need for installing the SAP Web AS and NWDS IDE in my personal computer .
Thanks
Nageswara.

HI Nageswar,
if you want to install developer workplace (NWDS + JAVA WAS)
you need:
RAM: 1 GB required, 2 GB recommended
CPU: 1 GHz required, 2 GHz recommended
Disk Space: 3,3 GB (1,9 GB temporary)
Detail information you can find in
service.sap.com/instguides -> SAP Netweaver -> release 04 ->
installation -> Inst. Guide - SAP NetWeaver Developer Workplace Stack x
Regards
Bogdan

Is multi-factor auth required for self-service password reset and portal registration?

Hi, hoping someone can give some clarity on this. I'm dealing with strictly online accounts, no AD sync to local servers. I have enabled and configured self-service password reset in AzureAD. In that config I have required users to register
their alt contact info when logging into the portal. While testing this, I don't get prompted to register unless I've enabled multi-factor auth for the test user account. I need users to register in case they need to use SSPR, but I don't want
to force them into MFA. I've gone over the following article and it says nothing about requiring MFA for SSPR or forced portal registration to work.
https://msdn.microsoft.com/en-us/library/azure/dn683881.aspx
I know there is a separate link for the registration portal that will guide users through the process, but that's a separate link. Maybe they'll set it up, maybe they won't. I'd like for the first sign-on to be a smooth process that gets them
set up for SSPR if needed. Can someone clarify and point me in the right direction? Thanks.

Hey acook15,
I work on the password reset engineering team. Right now, you are correct, you cannot enforce registration for password reset during first sign in. This is a feature that we are working on right now, which will be available very soon for sign
ins to Azure, your connected apps, and the access panel, and will come a bit later for Office 365 sign ins, as well.
In the interim, you can configure SSPR to require users to register when they access the access panel at myapps.microsoft.com by following the instructions here: http://aka.ms/customizesspr (search for "Require users to register when signing in to the
access panel?").
You can also read more about other ways to get SSPR data in the system for your users here: http://aka.ms/ssprbestpractices. Let me know if this helps, and if you need to get in contact with me, feel free to email me at [email protected]
Regards,
Adam.
Adam Steenwyk | Senior Program Manager | [email protected]

Consequnces of installating IIS after WEBAS and Portal installation

Dear All,
I have a query regarding IIS (Internet Information Services) installation a server, where Portal(WEBAS) and other components are already installed.
If this installation leds to some problems. is there any guidelines for this kind of installation.
We are having major issues because of this. We have already raised a OSS with SAP. But its already 12 days since we raised this issue and so far no solution has been suggested..
It will be great if you can share your experiences.
Thanks a lot for your time,
Regards,
Sudhir

Hi Eric,
thanks for your reply. before IIS installation i installed IIS. After installation i could not access Portal, Visual admin . even using telnet i could not connect to my J2EE server.. which was really very strange..
regards,

How to install java stack ,only abap ,basis patch level 9 installed

how to install java stack ,already installed abap ,basis patch level 9,please any one guide me and please give me installation steps for java stack.

Hi,
From sapinst, install Java Add-on.
check installation guide.
Thanks
Sunny

Minimum Patch for 11.1.0.6

Hi All
what is the minimum patch level needed for Oracle 11.1.0.6 running on Solaris 10 ?
i have no access to metalink.
thanks
Arun

user636357 wrote:
how about for solaris .... i mean do i need to looks for any OS patches that needed for 11g?What about reading the doc about the software requirement :
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/pre_install.htm#CHDFFBIF
Nicolas.
PS : sorry, this link has already been provided earlier by Jean-Valentin, but you really should go through this doc.
Edited by: N Gasparotto on Jan 7, 2010 8:45 PM

Upgradation Minimum sp level & kernel level for SAP 4.7 to ECC 6.0

Hi,
We recently created a test box , copy of devolopment.
We are running on SAP 4.7 with sap_basis and sap_abap with sp level 46.
SAP 4.7 with kernel release 640 and kernel patch version 155.
Oracle 9i.
What is minimum support pack level and kernel patch level required to upgrade from sap 4.7 to ecc 6.0.
As per threads it looks like kernel patch version should be 175.
Can any one guide me with sap note which provides the info of minimum sp level and kerenl patch level.

The source system requires a certain support package level (that is described in the upgrade guides) because the tools that to the import require them.
So the easiest way is to check the upgrade guides and the mentioned notes which is the minimum support package level for the source system to start the upgrade.
The target level must be at least equivalent or higher.
Markus

Minimum Patch Level Required to install Netweaver 7.0 and Portal

Similar Messages

Maybe you are looking for