Minimum patch level to be installed in 4.6 & ECC 6.0
Hi Experts,
Can anybody tell me what are the minimum patches or patch level to be installed while installing 4.6c and ECC 6.0?
Valuable answers will be rewarded.
Thanks in advance,
Suba
Hi,
I am trying to find the 46D_EXT kernel but i am unable to find the same.The 46D_EXT kernel is not available under archives.
The purpose for which i required the kernel is that i am upgrading a 4.6C, oracle 8.0.6.1, win NT system to ERP 2006. I want to do a system copy of the source system onto a hardware running windows 2003. This can only be done if i have the 4.6D_EXT as per the message above.
Is there a better approach? According to my approach i will do a system copy onto a windows 2003 system --> upgrade oracle to oracle 10g ( using all the steps like first upgrade to oracle 8.1.7 then to oracle 9.2.6 then to oracle 10g) then i will proceed to upgrade the system to ERP 2006.
Please advise.
Regards
Ankan Majumdar
Similar Messages
-
Minimum Patch Level Required to install Netweaver 7.0 and Portal
Hello Everyone,
We are currently on ECC6.0 and I need to know what the minimum Patch Level needs to be to install Netwever 7.0 and Portal.
Thank you,
AhhsapHi,
As Sunny suggested, check if you have an existing portal instance.
If not:
Like I mentioned earlier, if you had upgraded ECC 6 to EHP4, then you need to install a separate NW EHP1 Portal. Since both your existing EHP4 ECC system and the new EHP1 portal are based on Netweaver 7.01 release, your systems will be in a consistent release level. It is recommended to install a separate Netweaver portal instance. SAP no longer recommends dual stack (abap + java) installations.
If you do have an existing portal instance, just upgrade the portal to Netweaver 7.0 EHP1 (if ECC is in EHP4) or latest SP for Netweaver 7.0 (if ECC is =< EHP3). I believe this can be done by either SAP EHPi or JSPM.
Cheers
Rishi -
Minimum Patch for 11.1.0.6
Hi All
what is the minimum patch level needed for Oracle 11.1.0.6 running on Solaris 10 ?
i have no access to metalink.
thanks
Arunuser636357 wrote:
how about for solaris .... i mean do i need to looks for any OS patches that needed for 11g?What about reading the doc about the software requirement :
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/pre_install.htm#CHDFFBIF
Nicolas.
PS : sorry, this link has already been provided earlier by Jean-Valentin, but you really should go through this doc.
Edited by: N Gasparotto on Jan 7, 2010 8:45 PM -
PI 7.1 upgrade - PI_BASIS patch level in ECC
Hello
We are looking at upgrading our XI 7.0 SP12 to PI 7.1. Our backend ECC system is at PI_BASIS SP11. Most of our interfaces with the backend are through ABAP proxies.
Will an upgrade to PI 7.1 demand an upgrade to PI_BASIS in the backend ECC system as well?
If not, what is the minimum SP level the PI_BASIS component in the backend ECC system should be at?
I don't find this information in upgrade guide; where will this information be normally available?
Thanks
KKYou can use PI 7.1 with any SAP system.
However, if you want to use Abap proxies based on message interfaces of type "stateless" with WS-RM protocol, the ECC requires SP 14.
The Abap proxies based on XI 3.0 protocol do not require any special patch level.
Regards
Stefan
Edited by: Stefan Grube on Aug 28, 2008 4:34 PM -
I have engineers asking for a particular kernel patch level to be installed on machines.
Is there anywhere that lists the kernel patch level on releases and hardware updates for Solaris 8-10?
Thanks,
DuanePlease start with Sunsolve (http://sunsolve.sun.com) and Sun documentation (http://docs.sun.com) web sites.
-
Patch levels for Oracle and kernel
Hi everyone,
Can you pls tell what are the maximum and minimum patch levels that can be used for BW 3.5 installation on LINUX RHEL 4 ,
oracle -10.2.0.2 & kernel - 6.4 .
Thanks in advance,
Praveenhi people,
we have checked for the status of support package in Transaction SPAM traffic signal is still red and in the Phase RUN_SPAU_? it is stuck and even after restarting import it shows clean-up phase is left and it ends with same error mention above
the support package name is SAPKB70014 size is 116266 MB now after restarting the Import the following error message comes
The import was stopped, since an error occurred during the phase RUN_SPAU_?,
which the Support Package Manager is unable to resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
- Error in phase: RUN_SPAU_?
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0255
- Error message: Could not connect to semaphore server
we run all the phase in background, and even after entering the support package number in transaction SPAU there it is showing
"No objects within selected filter parameteres"
Q.1 Any idea what went wrong and how to fix that?
Q.2 Is there any problem if we run the all four phases of support package in background or it should be run in dialog
latest tp & R3trans updated? -
Problems with install 710 Patch level 15
Hi,
i have installed patchlevel 15 of GUI 710. Istallation was OK. When i check the Installation,
with tweak SAP GUI i get two error:
File not found: C:\Programme\Java\jre6\lib\ext\VERSION.ini
and
File not found: C:\Programme\Java\jre6\lib\ext\VCTK.ini
Has enyboby installed patch level 15 and get the same error.
How can i solve this problem?
thanks.
Regards, DieterDieter:
If your running Windows 7, this patch will not work however 14 will. The updated patch will be available 1st quarter of this year from what my understanding is. -
Problems installing SAP GUI 7.1 patch level 4 for Bex Analyzer
Hi all,
I have a problem installing the SAP GUI for BW - running office 2003, have tried to install without success. The old Bex tools seem to work, but not the new ones and when opening any of the tools report designer or web application designer I get the error : System configured incorrectly. The new functionality in Bex Analyzer do not respond when clicking on the icons.
Thanks,
DirkoHello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven -
How to install java stack ,only abap ,basis patch level 9 installed
how to install java stack ,already installed abap ,basis patch level 9,please any one guide me and please give me installation steps for java stack.
Hi,
From sapinst, install Java Add-on.
check installation guide.
Thanks
Sunny -
Create an install CD for SAP GUI Windows Patch Level 4
Hello,
I would like to create an Install CD for SAP GUI 720 for Windows with Patch Level 4
so that my user just install once.
From the market place, I can download Patch Level 0 distribution.
It is a Zip file that I can extract and use to generate an Install CD.
But it is LVL 0 only,
Then, I can download the Patch 4 executable file.
Unfortunately, the only way I can go to patch 4 is to execute this new program on my installed GUI.
Is there a way to generate, or even better download, an install CD that would contains the PL4?
so that the user just does one install and does not have to run the patch executable after the install.
If yes, how can I do it?
Thanks in advance for your help.> No my idea was to generate a CD with PL 4 now.
You can do that using an installation server, you can create a single .EXE file and burn in to a CD for the user.
> We test it and stand to it for a long time.
We tried to do that in the last 15 years we're doing SAP, unfortunately there come always situations, where you don't get around installing patches on PCs. This is especially true for BW, where the tools used depend (more or less) to the patchlevel of the backend system. However,
> Would someone know where I could get the release date of these compilation CD fro 720 Windows GUI?
The patch dates/weeks are listed in "Note 1053737 - Expected release dates for SAP GUI for Windows & ITS Patches", however, they are estimates.
I would assume that the next compilation will be released with Business Suite 7i2010 (or whatever name it is actually). Those compilation CDs are neverless always at least one patch behind the actual one.
Markus -
SP13 not compatible with installed BIA? Determining BIA patch level
I'm having a bit of an issue finding where in TREXAdmin or on the OS I can find the applied patch level on the BIA.
I upgraded the BI ABAP side to SPS13 and it no longer recognizes installed BIA instance.
I then updated BIA to rev 41 which is all that is available in SAPnet, and I still get the same error. The update was successful with no errors but Id like to see "Patch level 41" listed somewhere in TREXAdmin just to be sure.
Any help would be greatly appreciated.You can check the version of the BIA several ways.
TREXAdmin (python):
Landscapes -> Hosts -> Version -> Under Version column
BI via tcode /TREXADMIN:
Version tab
If you have issues with connectivity please check the Connectivity tab in the TREXAdmin python tool and do a repair. This should fix the problem. -
Problemin installing SAP GUI 7.10 Patch level 11
Hi,
I am trying to install SAP GUI 7.10 FRONT END components on windows vista but it is giving the problem that
patch level 11 is not present . We are using the SAP ECC Version 6.4 and i want to install SAP ECC 7.10
front end components on windows vista but it giving the problem .
Plzz provide me guidelines tosolve this problem.Hello
please download the compialtion 3 cd of sapgui 710.
http://service.sap.com/installations
Entry by Application Group
SAP Frontend Components
SAP GUI FOR WINDOWS
SAP GUI FOR WINDOWS 7.10 CORE
Installation
Compilation 3 cd is delivered with the sapgui patch level 11!
Also the sapgui patche you can find in
http://service.sap.com/patches
Best Regards
Sven -
Adobe Reader cannot print after installing SAP GUI 6.40 with patch level 25
Hello,
We are in the midst of rolling out sap gui 6.40. Noticed that after installing the gui 6.40 with patch level 25, users cannot print adobe documents. However they can read.
Anyone experienced similar issues? Kindly assist.
Adobe version is 8.
Regards
SachinChanges some windows configuration to rectify the above issue.
Thanks
Sachin -
6i on Solaris - minimum patch revision
Does anyone know where I can find the Forms Server 6i installation guide? It doesn't appear to be on technet.
I need to know the minimum patch revision levels for running 6i on Solaris 2.6/5.6
Also, has anyone ever run into this error:
kgepop: no error frame to pop to for error 0
thanks!Application server (OAS 9i or earlier) can be istalled only on server (WEB Server machine).
For Forms/Reports you can install them on every workstation. But some enterprises prefer to install them on the server and somehow to give access to Forms/Reports Developer to every user.
looking in my archive I found the following for you (I copied it from one answer):
Platform Oracle8i/NT4.0 - Clients MS Windows (95, 98, NT)
We configure our clients so that Developer 2.1 (Forms, Reports, graphs) runtime code can be run
from
the network, rather having to install on each client PC. We paste the
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE
key into the Windows registry of each client. The key contains the location of the Oracles files on
the file Server. This makes it very quick & simple to set up clients.
The problem is now we have the need for ODBC to be set up on the clients as well, for MS Access
connections
to the Database. I've pasted the registry key for the ODBC DSN onto the ODBC key but obviously more
is required. Has anyone got this done before?
No, I haven't done that for ODBC but it may be possible.
I agree with you that this network approach makes it easy to set up Oracle client machines.
Depending
on the speed of your server and your network though, the response time penalty for running Oracle
Forms
from a server can be significant. It is not difficult to install the Oracle client software on one
client, then replicate that to the other clients. The users may like the response times much
better
that way. Also, if you make any changes to Oracle Forms or especially to PLL files, you will not
be
able to deploy them on a server while anyone is using the application, if everyone runs it from the
server. -
How to find out the IPS and DS Service Pack and patch levels in windows server.
Hi,
I have installed the Information Platform Services 4.0 and Data services 4.0 in windows QA system, now we need to install the same version of IPS & DS in windows PRD system for this how could we find out the exact version of IPS & DS ( Service pack and patch levels ) and where we can find the same.
Many Thanks,
SudheerHi Sudheer,
On a Windows Operating Systems you can check the “Programs and Features” in control panel.You can see a list of both the Name and Version number of SAP BusinessObjects that is installed.
option 2:
Open CMC go to Settings. In the properties, you will find the Product Version.
Please check below SAP notes for more information.
http://service.sap.com/sap/support/notes/1602088
Regards,
Pavan
Maybe you are looking for
-
Hi Experts, We have set up the payment request settings (Spl. GL indicator u2018Pu2019) in D01. We made a payment against a MIRO invoice & paid through APP (Automatic payment program). However when try to clear the payment with the vendor invoice usi
-
Fixed size regions in Apex 4.0
It is possible to create a fixed size regiion - that is only using half of the screen height to have a report (and having a bar to on the right to move up/down) ? I'm going to use it for a 2+ master-detail report. regards Mette
-
Create PDF using DoCmd.Outputto method in legal size page
I am working in MS Access 2010. I am trying to convert a report to a PDF file. I am using the following command "DoCmd.Outputto acOutputReport, Report Name, acFormatPDF, FileName". The report I am using is formatted in legal page size. When the PD
-
File content conversion for file with hierarchical structure
Hi I want to read a flat file in the following message structure using file content conversion. Message structure is : 01 ( occurence = 1) _ 1B (occurence = unbounded) _ 1G (occurence = unbounded) _1H (occurence = 1) _1N ( occurence = unbounded) 99 (
-
Help with Booklet printing in indesign
Hi I am trying to set up a 8.5 x 11 brochure with double sided pages. the pages will originally be 17 x 11 so i can fold them into the correct size. how do I go about setting this up? I know i need to print duplex with saddle stitch but when i try to