'Minimum purchase order quantity' in info record doesn't work

Hi,
I've maintain the value of 'Minimum purchase order quantity' and 'Maxmum purchase order quantity' in info record via t-code: ME12, but it doesn't work.  No any affection happened to the newly created PR.
Please kindly advise.
Best Regards.

Hello Rolf
The setting you are looking for is done in
SPRO --> Materials Management --> Purchasing --> Environment Data --> Define Attributes of System Messages --> System messages
Go to
Version                    00
Application Area       06
Message No            216
Make the Category to E - Error instead of W - Warning
Hope this is what you are looking for
Regards
Amit

Similar Messages

  • Purchase order text  in info record

    Hi!!
    I want to clean purchase order texts of all info records.
    How Can i know that info records have Purchase order texts?, Which table can i use?.
    Thanks,
    Regards.

    Hi,
    check in tables
          EINA --> Purch. Info Record, General Data
    and EINE --> Purch. Info Record, Purch. Org data
    I guess, you may find it.....

  • Change in rate in purchase order because of info record

    Hello,
       When i try to create a purchase order with some Rate, system is showing me info record rate.
    In info record Rate has been changed for a vendor which is getting reflected in purchase order.
    This is creating problems for payment.
    How can i prohibit this.
    Thanks & Regards,
    Priyanka

    it is a standard functionality of sap that price is accesed from info reocrd (if present ) at the time of good reciept..so if u dont want that price from info record then change the validity period of the conditions........then that rate is not going to effect the po.but your po sholud not come into that time frame of conditions...........
    please elaborate ypur query

  • Avoid Purchase Order without Quality info Record

    Hi All,
    I am facing the problem, i.e i want to avoid creating purchase order if the quality info record is not maintained.
    Can we do it ?????, If yes please suggest me how to go about it & what are the control points for the same.
    Please reply ASAP.
    Arun

    Hi
    In material master  If u activate QM proc key.And enter a valid Control key like 0001.system will not allow u to create PO without Info record(QI01).
    If any queries let me know.
    Gopi

  • Min.order Qty from Info record in PR in MRP

    Hi,
    Is there any setting by which , while running MRP, system will take min.order quantity from info record (instead of material master) ?.
    If not , then is there any way to achieve the same?

    Hi Csaba Szommer
    You are right, If you try to convent PR in to PO, and  if you have maintained min.order qty in info record,  you get message ( error / warning ) as per your message setting.
    Your question is also valid that if the same material is being procured by many vendors, and each vendor might have  different min. order qty, Hence it has to be picked from info record only.
    But I have tried with all the possibilites. While converting PR into PO, based on system message you can correct the Quantity, but if MRP generates PR ,based on the min.order qty in info record, then no need to handle such messages.
    You can try also, maintain different min. order qty in Material master and info record, it will always take from Material master and never from info record.
    But Logically, it should take from info record.
    That is why I wanted to make the system take info record min.order.qty.
    So it would solve the problem if you know some setting that takes min.order.qty from info record.
    ( ref: I am aware of planned del. time , there is one checkbox in  plant parametes, if you select that , system will take planned del.time from info record , if you don't, system will take it from material master. So if you know any such setting for min.order.qty, pls let me know. I could not find any such possibilities)
    Thanks

  • Purchase Info Record for Frame work Order

    Hi Friends,
    Do we have Purchase info record for Frame work Order(FO) ?. If yes, Please tell me which info category should i need to select to create a Purchase Info Record.
    Thanks

    Hi
    Is that means, Framework  PO will also use the same standard Purchase info record ?
    Thanks

  • Can we issue purchase order without price info

    Hi,
    We had issued purchase orders to a vendor, but we come across that price info has not been maintained for the same. It seems that this is exceptional case. Can we issue purchase order without price info ??
    Regards...

    Hi,
    In general case while creating purchase order price is picked up from purchasing info records which are valid , if the info record is not maintained it is picked up from last purchase order.
    But as you said it is purcahse order without info records.
    Options available are;
    You can manually enter the price in the item overview and details will automatically get calculated in item detail of purchase order
    You can mark free delivery indicator in the item overview.
    Thanks,
    Tushar Patankar

  • Good receipt exceed purchase order quantity

    Hello all, I am trying to do a good receipt that exceed purchase order quantity but I have an error message that I can´t do it.
    I configure tolerance limits B1, B2 and VP but it doesn´t work.
    I only can do a good receipt that exceed purchase order if I put tolerance limits in the PO Delivery tab
    Is there another way?
    Thanks in advance
    Rosa Rodríguez

    Hi Rosa,
    You can see the SAP Note 24312 - Inventory management - system message M7022 - Release Indep.
    As stated in it:
    "During the goods receipt with reference to the purchase order or the production order, overdeliveries are only allowed if this was determined in the purchase order or order (indicator "Unlimited" or definition of the "overdelivery tolerance"). If this is exceeded, the system will always display an error message.
    The corresponding system message was hard-coded as error message in the program. In these cases, the Customizing settings have no effect."
    Also see the SAP Library:
    http://help.sap.com/
    SAP ERP Central Component
    -> Logistics
       -> Materials Management (MM)
          -> Inventory Management (MM-IM)
             -> Inventory Management and Physical Inventory (MM-IM)
                -> Goods Receipt
                   -> Goods Receipts for Purchase Orders
                      -> Underdeliveries, Overdeliveries, and Final
                         Deliveries
    "Overdeliveries:
    In the standard, overdeliveries are not allowed. In the event of an overdelivery, the system issues an ERROR message.
    If overdeliveries are to be allowed, you can specify the following data in the purchase order:
    .- Unlimited indicator:
    If this indicator is set, overdeliveries of any size are allowed. The system does not issue any message.
    .- Overdelivery tolerance:
    You can enter a percentage overdelivery tolerance in the purchase order.
    If a quantity of goods received is larger than the order quantity plus the overdelivery tolerance, it is not accepted by the SAP system."
    So you can only overdeliver the quantity ordered by setting the "unlimited" (EKPO-UEBTK) indicator or by defining Overdelivery tolerances at the Purchase order item level.
    It is not allowed either to receive more than the quantity ordered plus the overdelivery tolerance.
    The system forbids overdeliveries by hardcoding the message as error in the system.
    As already stated by the note 24312 the customizing settings do not have any effect.
    I hope this helps you.
    Best regards,
    Esther.

  • Report including open purchase order quantity for one storage location

    Hello gurus,
    I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
    I.e. like this:
    Plant 0001, storage loc. 01
    Material        stock        open purchase order quantity
    100000        200 pcs.   50pcs.
    Is there such a report in SAP standard?
    Thanks
    Alicia

    hI
    U want the report like this ,
    MAterial stock availablein storage location and with Open PO quantity for the same material.???
    This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
    One is for materil stock in storage location is MB52 or MB5B
    THen ME2N for open PO quantity for that material.

  • Report for open purchase order quantity

    Dear experts,
    Is there any report for showing open purchase order quantity for which goods are not yet received?
    Regards
    babu

    Hi
    ref the blw link which will have the complete sap std reports
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/sapStandardReports

  • Open Purchase Order Quantity

    Hi, All,
    Is there any way to know how many open purchase order quantity in the SAP system?
    If I want to differentiate different business unit open purchase order, how I can do?
    What's the T-code?
    Thanks

    Hi,
    You can use ME2M, ME2N, ME2L, in the field Selection Parameters on the initial screen specify WE101 & the reports will list out all PO's for which GR is pending (i.e. Open PO's). Now you can change layout add / remove fields as per your need. You can also sub-total on plant or purchasing org. thereby getting the data you require. Also in the selection screen in the field Scope of List you can specify ALV to get an alv listing.
    Hope the above answers your query.
    Regards,
    Vivek

  • Open Purchase Order quantity in SC PO

    Hi,
    Can anybody tell me open purchase order quantity in case of Subcontracting Purchase order.
    what happen in case of subcontracting po with open quantity of po
    Thanks and Regards
    Anil Patil

    Hi
    Can you please more specific
    1) Normally in subcontracting if ur PO is open then it means that still the assembly stock is with vendor
    2) in some case if the vendor consumes more components/qty than the original BOM qty in the received
    Finished Goods  then you need to do subsequent adjustments
    3) If u dont have any assembly components in hand for issuing the same to vendor then adjust the PO qty and close it
    Regards
    Amuthan M

  • Total open purchase order quantity fro a material

    Hi,
    Waht is the table that contain the total open purchase order quantity (on order quantity, not yet goods receipt) for a material number?

    hi,
    You can check the table EKPO, EKKO, and EKBE...
    also for delivery schedules use the table EKET...
    You also have a report ME2N for the same, use the proper selection parameter...
    regards
    Priyanka.P

  • Purchase Order Quantity should not be more than PR quantity

    Dear all,
    We want to control Purchase Order quantity against Purchase Requisition.
    We have configured message setting 00 076 as  ERROR. when we create Material PR for lets say 100 quantity. When we create single or multiple Material PO against this PR for more than 100 quantity system is giving us error. This is exactly what we needed.
    But due to this message setting when we create Service PR and give service quantity lets say 100. and when we create Service PO and give Service quantity 60. First time system is allowing to save the Service PO.
    When we create another Service PO with reference to same Service PR system is showing error as we have configured. Even though quantity 40 is still available.
    What we want is to have control on quantity of Purchase Order for Material as well as service. Quantity should not be more than PR quantity.
    Is there any other way to have such control? please provide other available options to configure.
    Regards
    Kant

    Hi,
    06 076 is only for applicable only in case of material.
    For Service and material both, use 06 400 as error "Materials/services for requisition & & already ordered with & &"
    NOtes 786736
    This may help u !
    Regards,
    Pardeep malik

  • Purchase Order Quantity appear as 1 instead of 0.222 in PO print preview

    Hello MM Enthusiasts,
    I have a PO with acct assgt – P (Network) where Purchase order quantity updated as 0.222 but if I click on PO print preview the quantity appear as 1 instead of 0.222.
    Please let me know what has gone wrong in my case.
    PS: When I look at my Output type by click on message in ME23N the traffic light was green and no issues observed here.
    Cheers,
    Kumar S

    Hello ALL,
    Thanks for the response.
    This is a REAL issue.
    The purchase order has been created manually by user  with reference to purchase requisition.
    When I look at Purchase requisition in transaction ME53N it has been created for 0.222 quantity. Further to inform you that Purchase requisition has been created via network which is having the same quantity – 0.222.This I can verify it by executing transaction CJ20N.
    In this case Purchase order which has been created user manually and initially quantity has been entered as 0,224 later on date - 23.03.2014 another user has changed it to 0.222 which is as similar to Purchase requisition quantity.
    Please let us know via transaction OLME what needs to be checked.
    Hope now issue is clear and expecting your valuable input to proceed further.
    Cheers,
    Kumar.S

Maybe you are looking for