Minimum R/3 config. for BW 7.0

Hi,
We have R/3 system with following configuration:
Release            : 4.7
SAP_BASIS     620     0055
SAP_ABA             620     0055
SAP_APPL     470     0025
SAP_HR             470     0048
ABA_PLUS     100     0015
EA-IPPE             200     0020
PI         2004_1_470     0007
PI_BASIS    2004_1_620     0010
ST-PI         2005_1_620     0004
Can anyone tell me if this is compatible with BW 7.0 or not..? If not then what is the required R/3 system requirement..?
Thanks in Advance.
Best Regards,
Samay

HI Bharat ,
Depends Whether you have installed the EP on ABAP or JAVA stack . IF it runs on ABAP stack then you need to create user thourgh ABAP. and you dnt require any role to access R/3. depending on the reuirement you can define the R/3 system in the portal and the SLD.
Thanx
Pankaj

Similar Messages

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

Vendor Payment Terms config for 30%advance 70% after GR

Hi Guys,
How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
Please suggest your expert comments.
Thanks in advance.
Regards,
Jackie

sappassion2011 wrote:
Hi Guys,
>
> How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
>
> Please suggest your expert comments.
>
> Thanks in advance.
>
> Regards,
>
> Jackie
Hi Jackie,
Do them in trxn OME2
Regards
Shiva

What's the best Mac Pro config for Fireworks?

What's the best Mac config for Fireworks?
I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
I should get a Mac Pro right? Which processor?
• Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
• Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
• Two 3.06GHz 6-Core Intel Xeon (12 cores)
Should I get 24GB RAM?? Or is that overkill?
I'll get a 2TB serial hard drive…
I should get a 512 GB solid state drive offered by Apple right?
Or is it possible to get a larger better 3rd party SSD?
And then maybe two 21" Displays… Two 27s seems a little much… or does it?
Thanks in advance.

Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

Add file config for hole application?

Hi everyone,
Is there any one worked with build file config for hole fusion adf application? It is similar with web.config in .NET ASP web site. I think in jdeveloper, we can use web.xml for add some parameter but don't know how to read this parameter?
Any help is appreciate!
Thank.

User, please tell us your jdeveloper version!
In general you can read context or innit parameters from web.xml.
You get to them via the servlet context
String databaseHost =getServletContext().getInitParameter("database.host");
And to get to the servlet context use
FacesContext ctx = FacesContext.getCurrentInstance(); ServletContext servletContext = (ServletContext) ctx.getExternalContext().getContext();
Timo

Minimum & maximum price paid for material

hi gurus
Can u tell me how to see max.& minimum purchase price paid for material with respect to vendor.
Reg
ROC

try the reports
ME80FN, ME2N, ME2M, ME2L
Regards
Sujoy

How to set a minimum width and height for a stage or scene?

Hello,
Does anyone how to set a minimum width and height for a stage or scene?
I tried listening for width/height property value changes and then adjust the width/height if necessary, but that causes unpleasant flickering of the window.
In JavaFX 2.1 beta SDK for Mac OS, the Stage class has setMinWidth() and setMinHeight() functions which work very well.
I'm wondering what's the equivalent way to do that when using the FX SDK for Windows.
Any help is appreciated!
Thanks.

I was wondering how to enforce a minimum stage size with JavaFX 2.0.3.The same flickering way you are currently doing it. See: http://javafx-jira.kenai.com/browse/RT-15200 "Need a way to set the minimum size of a window"

Hal config for Elantech/Eee 1000h touchpad?

I've tried using the one that's in the 901-install Wiki page, and find it massively flakey (sorry no offense to anyone), compared to using xorg.conf.. It doesn't allow precise control at all, and for some reason (I'm sure it's the way I move my finger), seems to really jump up or down when I move side to side..
So does anyone have a config for this that works real good, that cares to share?
Thanks in advance.

I know this problem occurs when I compile the elantech driver in the PS2/trackpoint driver:
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
I was told you need the latest xf86-input-synaptics but Arch has the latest...
My workaround was to disable elantech:
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set

Cisco ISE configs for switch

I suppose Cisco ISE sends a URL redirect to the switch and the switch presents it to the client in case of guest Access getting a URL redirect with User Acceptance Page (Wired Guests and not wireless).
My question here is, Do we need to configure http and https server on the switches (both supplicant and authenticator)?
I am sure it will need but just wanted a confirmation..
I have checked the configuration for supplicant and Authenticator switches for ISE and it has no where mentioned that part of the config.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html (a problem of URL redirection and possible cause is mentioned) ------- makes me sure that the config is needed.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_010000.html
(config of supplicant and authenticator switch)---- nowhere mentioned of the http/https config for both switches.

Yes, its needed. The http/s server within the swtich is used to grab the http user traffic and redirect the traffic to the CWA portal, or a device registration portal, or even to the Mobile Device Management (MDM) onboarding portal. .
ip http server
ip http secure-server
The info below I grabbed from Cisco ISE for BYOD and secure unified access book.
"Many organization want to ensure that this redirection process using the switch's internal HTTP server is decoupled from the management of the switch itself, in order to limit the chances of an end user interacting with the management intervace and control plane of a switch. this may be accomplished by running the following two commands from global configuration mode:
ip http active-session-modules none
ip http secure-active-session-modules none"

Working eMTA config for a Metaswitch for Cisco DPQ3925

I need a working emta config for a DPQ3295 cable modem that will work with a Metaswitch AGC using NCS

Thanks for the reply but it still doesn't work. I have tried those commands a few times and I always get the same error...access violation.
I am using TFTPserver for Mac. My Server Status, Working path permissions and Parent folder permission are all green.
I have tried it with a pre-made file and without a pre-made file and I get the same result.
I can create and modify any files in my working directory.
This the message in the log file...Mar 25 13:12:41 MacBook-Pro-Retina.local TftpServer[1295]: 10.4-style NSDateFormatter method called on a 10.0-style formatter, which doesn't work. Break on _NSDateFormatter_Log_New_Methods_On_Old_Formatters to debug. This message will only be logged once.
I am not sure what that means, but I will research it after I post this.
I have tried both the CLI and the GUI and neither will work.

Error download when trying to download config for music [ios 7 beta 6]

I recieve an error when i try to download the music/video config for ios 7 beta 6. Any ideas?

We can't help you here as you are not allowed to talk about beta software in this forum. Ask this question in the Developer forum > http://devforums.apple.com

BEST CONFIG FOR EDITING

Hello i have adobe premiere CC with imac, pegasus RAID 4 and external SSD hardrive 512Go. What is the best performance config for : Media temp files, rush, application ?
Thank you

Read all the articles at Tweakers Page

XCM Config for R/3 ISA

Hi
I am following the best practice but still getting some error in webshop is there a step I am missing, Can anyone please help me with this XCM config for a mySAP Ecommerce
Thank you so much
Abhi

i have ECC6. i want to enable sap ecommerce and IPC on this machine. what are the tings i have to do please let me know in detail.
when i m trying to acess this page throu url http://<host>:<port>/b2b/b2b/init.do
its giving error.
should i have to activate XCM if yes the how please reply ASAP
thanks with kind regards

Minimum R/3 config. for BW 7.0

Similar Messages

Maybe you are looking for