Minimum/Recommended Hardware Requirements for DHCP on Windows 2012 R2

Hello,
I am in the process of building two VM's on Windows Server 2012 R2 in-order to run DHCP with Failover.
Before I build my VM Servers I would like to know if there are Recommended Hardware specs that these servers should be built with?
I've been looking around for a little while and can't seem to find anyone or anywhere that these requirements are posted.
Any help would be greatly apreciated!
Thanks,
André

Totally agree with Henrik that DHCP is a very lightweight application and does not require much hardware.  In fact, it is often deployed as another role on a Domain Controller.  The thinking there is that the DC is something you want to have available
all the time, just like DHCP and DNS.  Why not put them on the same box.
My only difference in suggestion about hardware recommendations would be to use the 2012 recommendations instead of the 2008 recommendations, though they are pretty much the same -
http://technet.microsoft.com/en-us/library/dn303418.aspx
. : | : . : | : . tim

Similar Messages

  • What is recommended hardware requirement for central SLD?

    We plan to have cental SLD for the entire landscape(Small size-ECC 6.0, EP and BI).
    So what is the recommended hardware requirement for this SLD?

    Hello Sanjai,
    Please use the following link to find the complete information about System Landscape Directory. (My recommendation is read the Planing Guide for SLD).
    System Landscape Directory (SLD) the SLD paper to develop your strategy.
    Hope it helps.
    Regards,
    Satish.

  • CAL requirement for AD RMS Windows 2012 R2

    Do we need to install RMS CALs on RMS server or they are just required for compliance ?

    Hi,
    the client access license for RMS is a paper-license. You do not have an actually product key you need to install.
    So that is what I think you called "for compliance".
    Regards,
    Lutz

  • Hardware requirements for JDeveloper 3.0

    What are the minimum and recommended hardware requirements for
    JDeveloper 3.0?
    null

    Jasmin,
    JDeveloper 3.0 REQUIRES:
    NT 4.0
    Pentium 200Mhz processor
    96M of RAM
    225 MB (360 MB when using WebHelp) for a typical install
    130 MB (265 MB when using WebHelp) for a minimal install
    and RECOMMENDS:
    NT 4.0
    Pentium 266Mhz processor or higher
    128M of RAM
    225 MB (360 MB when using WebHelp) for a typical install
    130 MB (265 MB when using WebHelp) for a minimal install
    JDeveloper 3.0 is compatible with 8.0.5, 7.3.x and 8.1.5 versions
    of the database.
    Laura
    Jasmin (guest) wrote:
    : hi,
    : can anyone let me know:
    : 1. what are the hardware requirements for installing
    jdeveloper
    : suite 3.0
    : 2. whether jdeveloper3.0 is compatible ot oracle 8.0.5 on NT or
    : not?
    : i would appreciate any reply from u guys...
    : Thanks
    : Jasmin
    null

  • ...recommended system & hardware requirements for clients P6 8.2 Clien&Webs

    What are the recommended system & hardware requirements for clients P6 Professional and Client Web for P6 8.2 ???
    I need to know the recommended systems & hardware requirements for clients P6 Professional and Client Web for P6 8.2
    I mean what kind of processor, memory ram minimum and maximus to run or to deploy P6 Professional Client from P6 8.2 version and the requeriments to run the P6 8.2 Web application.
    I need like a chart (not necesary) with the most common configuration with hardware and software like the example below
         SO     Ram     Hdd     Processor
    P6 Professional 8,2     Windows Xp Sp3     4 Gb     2 Gb +     Core2Duo 1,8 +
         Oracle Linux     4 Gb     3 Gb     Core2Duo 1,6 +
    P6 Web 8,2     Windows Xp Sp3     4 Gb     2 Gb +     Core2Duo 1,8 +
         Oracle Linux     4 Gb     3 Gb     Core2Duo 1,6 +
    Because all information I saw it´s about Server (Database, Server Application and others) and not very clever about P6 8.2 Client and P6 8.2 Web.

    I haven't seen PC requirements for a Win workstation per se either. Here are the only 8.2 client requirements I can find.
    Supported Configurations for Client Modules
    For Clients Accessing P6
     Microsoft Internet Explorer (IE) 8, IE 9, Firefox 8+, Safari 5.1.x+, Chrome 15+
     Sun JRE (the required version will install automatically with P6); Always install the latest supported patch update with security fixes
     TCP/IP network protocol
    For Clients Accessing P6 Progress Reporter
     IE 8, IE 9, Firefox 8+, Safari 5.1.x+, Chrome 15+
     Sun JRE (the required version will install automatically with P6 Progress Reporter);
    Always install the latest supported patch update with security fixes
     TCP/IP network protocol
     Optional software:
     Java Access Bridge 2.01 (for 508 accessibility)
     P6 Progress Reporter has been tested with the following technologies:
     JAWS® for Windows screen reading software, version 7.0
     ZoomText Magnifier 9.0
    For Database Clients Running P6 Professional
     Database client release 11.1.0.7.0 is supported for Oracle 10gR2, Oracle 11gR1
    databases and 11.2.0.2.0 for Oracle 11gR2 (required only for Oracle databases and
    supports only the 32-bit version).
     TCP/IP network protocol

  • Minimum Hardware Requirement for Siebel CRM 8.0 for Linux Platform?

    Hi,
    What are the minimum hardware requirement for Siebel CRM 8.0 for Linux OS?

    Following are the Linux Platforms supported & officially listed in Siebel 8 Requirement Doc:
    Red Hat Enterprise Linux 4
    Siebel Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Oracle Enterprise Linux 4 Siebel
    Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Novell SUSE Linux Enterprise Server 9
    Siebel Gateway Name Server
    PIII XEON @ 500 MHz with 256 MB memory
    Siebel Server
    PIII XEON with two processors @ 500MHz with 1 GB memory
    Web Server
    PIII XEON @ 500 MHz with 512 MB memory
    Database Server As recommended by DB vendor
    Regards,
    Shalabhsneha

  • Hardware Requirements for a Windows Server 2012 Domain Controller.

    Hi,
    I have a secondary office with 10 users with a domain controller that has reached its end of life.  We like to upgrade the current hardware to serve as a domain controller and potentially as an onsite file server that will sync with head office during
    off peak business hours.
    Any recommendations for a low cost yet reliable hardware for the above solution ?

    Hi,
    Thanks for your post.
    I think you need to meet the requirement for upgrading to windows server 2012r2.
    http://technet.microsoft.com/en-us/library/hh994618.aspx#BKMK_SysReqs
    And you could refer to the following article about windows server 2012r2 domain controller configuration
    Building Your First Domain Controller on 2012 R2
    http://social.technet.microsoft.com/wiki/contents/articles/22622.building-your-first-domain-controller-on-2012-r2.aspx
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Minimum Hardware Requirement for SAP Business One For HANA

    Hello EveryOne,
        I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
    Is it can install on laptop or I need to buy giant server.
    Thanks in advance

    Hi Idrees,
    Check following links:
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
    http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
    One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Minimum Hardware Requirements for MDM 5.5 SP2

    What is the minimum hardware requirements for MDM 5.5 SP2?  For what I am doing, I expect to have 25-50K records stored in it.

    The question is clear but answers may vary from one repository to another. How many fields your main record will  have, how big lookup tables will be, how complex your taxonomy with attributes will be, and so on. But! The good news is you may try it even on your laptop. I got an impression it's for your own playing and experiments but not production yet. If you computer allows to run MSSQL and it has other I'd say 50-100Mb of memory free it may be enough. But again, it really varies.
    For production-oriented precise estimations you can read an official sizing doc at SMP - quick link /instguidesnw04
    The rule of thumb - the faster/bigger computer the better:-)

  • Hardware requirement for Oracle Universal Content Management

    Hi Experts,
    What are the Hardware requirements for Oracle Universal Content Management ?
    Regards
    Nasir

    does this help?
    Oracle WebLogic Server 11g (10.3.3) System Requirements
    Oracle WebLogic Server supports a number of platforms including:
    – Linux
    – Sun Solaris
    – HP-UX
    – Windows 2000, 2003 Server, XP
    • Processor:
    – At least one 1 GHz CPU is recommended.
    – Intel and UNIX processors are supported.
    • Hard disk drive:
    – A full installation requires approximately 2 GB of disk space.
    – The Linux value for file descriptors must be 4096 or greater.
    – Samples are optional (download from OTN).
    • Memory:
    – A minimum of 2 GB RAM is recommended for WebLogic
    Server.
    – Consider the number of simultaneous users and sessions.
    – Consider in-memory programs, such as Coherence.
    System Requirements
    The following are some of the basic system requirements for Oracle WebLogic Server 10.3.3:
    • The Oracle WebLogic Server installer requires a Java Runtime Environment (JRE) to run.
    Oracle WebLogic Server is certified with JDK6.0. As part of the installation, it gives the option
    to install the JRockit JDK 6.0 version. As part of postinstallation, prefix the bin directory of
    the JDK to the PATH environment variable.
    • The Oracle WebLogic Server installer requires a temporary location in which to unpack the
    files. Typically, the installer requires approximately 2.5 times the amount of temporary space
    that is required by the installed files.
    Note: In this release of WebLogic Server, users can choose which components of WebLogic Server
    they use. Specifically, this release allows users to choose whether the Enterprise JavaBeans (EJB),
    Java Message Service (JMS), and J2CA services are started when WebLogic Server is started. The
    benefit of excluding some services is reduced memory footprint and reduced startup time.

  • Hardware requirement For ECC6.0

    Hi Everbody,
    could u please help in providing hardware requirements for ECC6.0(IDES) for sandbox server.Like
    O/s(32bit or 64bit),processor,Harddisk,RAM
    with regards,
    eswar.

    Hello,
    O/s      - All 64bits now a days.
    CPU    -  PIV or Dual core also.
    RAM    -  3GB
    H/Disk  -  300 to 400 GB.
    Above all are minimum recommended.
    If u are able to arrage more , I/O ie performance will be good.
    That's it.
    Note: Points always encourage me to reply !!

  • Minumum hardware requirement for Siebel Document server?

    what is the minimum hardware requirement for Siebel document server?

    To install the Document Server, perform the following steps:
    Obtain the required hardware.
    Install the Siebel Server.
    Install third-party applications.
    After installing the Siebel Server, you may have to follow some of the steps described in Configuring the Document Server. The Document Server is a component of Siebel eDocuments, which can be installed during installation of the Siebel Server. Consult with your system administrator to verify that the Document Server has been installed and configured according to the requirements listed in the following sections.
    Hardware Requirements
    The Document Server is supported on the Windows 2000 platform. To maintain stability and performance, the Document Server must run on a dedicated host machine. The Siebel Server on this machine should host one instance of the Siebel eDocuments component group. No other components should be running other than required system components.
    To support more users, you can run additional instances of the Siebel eDocuments component group on additional dedicated host machines.
    Installing the Siebel Server
    Install the Siebel Server on the dedicated host machine of the Document Server. For more information about installing the Siebel Server, see Siebel Server Installation Guide for Microsoft Windows.
    During installation, you will have the option to enable component groups. Select the Siebel eDocuments component group. Do not enable any other component groups.
    This step can also be performed after installation is complete, as described in the section Enabling the Component Group.
    Installing Third-Party Applications
    You must install Microsoft Word.
    To install Microsoft Office
    Log on to the server machine using the same user account that the Siebel Server NT service uses. This user account must belong to the Administrators group.
    NOTE: The install must use the same account to be used by the NT Service. The installer configures COM security settings so that the installing user account will have the correct permissions to access and launch the application. If the install uses an account other than the Siebel Server NT service account, errors may occur when the Document Server tries to launch the application.
    Install Microsoft Office using a Typical, or complete, installation. Verify that your version of Microsoft Office will install the Web Authoring Tools (HTML) component with the Typical installation. If it does not, you will need to use the Custom installation option, and install all of the typical components as well as the Web Authoring Tools (HTML) component.
    Start the applications that will be used by the Document Server. This forces the applications to register themselves.
    Close the applications.
    Regards,
    Joseph Arul Dass

  • Hardware Requirements for SOLMAN

    Hi everybody,
    I'll appreciate (with points ) if somebody can give me the minimum hardware requirement for installing Solution Manager in a Windows machine.
    We are about to install a ECC 6.0 (with IS-U/CCS) for building a Demo.
    Thanks,
    Jessica.

    H/W specification for Solman 4  for Windows/Oracle Standalone
    RAM -  3 GB min
    HDD - 80 GB 
    CPU - 2 (1 CPU also will do)
    You can check under https://websmp107.sap-ag.de/instguides under SAP Components->Solution Manager
    You check the hardware and software requirements for your operating system (OS) and the SAP instances using the Prerequisite Checker tool.
    The Prerequisite Checker provides information about the requirements that you need to meet before you start the installation. For example, it checks the requirements for the different installation services.

  • Hardware requirements for movie rentals?

    Hi,
    finally iTunes rentals and movies have made it to the german store as well. I rented a movie yesterday and had to realize that my iBook G4-800 is not able to play the movie without stuttering and hanging all the time.
    I know that this is old hardware, but as far as the resolution of the movie is concerned, it should still play fine, at least in the Quicktime player. When trying to open it from the Finder directly in quicktime player, all I get is a message that this movie can only be played via iTunes. What a bummer, because playing anything that even looks like a movie in iTunes needs about twice as much resources compared to playing it in the quicktime player. At least on that machine. I have never understood why it is like that, because iTunes is certainly also using the quicktime framework, isn't it?
    Now, are there minimum hardware requirements for renting a movie? I couldn't find any. I read that you can download the movie in differnet resolutions, I did not get any window with choices for resolution when I rented the thing?
    Any clues would be appreciated. I already filed a report via my iTunes account about that, but it might take ages to get a response.
    Thanx and cheers
    Peter

    Looks like your processor is too slow. From this page: http://www.apple.com/itunes/download/
    Playing videos purchased on the iTunes Store requires a Mac computer with an Intel, PowerPC G5 or *1.0GHz PowerPC G4 or faster processor*
    Playing HD-quality videos purchased on the iTunes Store requires a 2.0GHz Intel Core 2 Duo or faster processor
    512MB of RAM; 1GB is required to play HD-quality videos
    Playing videos also requires at least 16MB of video RAM

  • Hardware requirement for sap system.

    Hello All,
    i want to install SAP on my local home PC.
    Kindly let me know the hardware requirment for this.
    So that i can

    If You want to install IDES 4.7EE
    Hard disk minimum 80 GB 120 GB or 160GB best
    Ram: Minimum 512 Mb 1 GB Best u can run in 256MB also
    Processor : Minimum PIII , PIV is best
    DVD Drive
    Remaining Normal
    If You want to install IDES ECC5.0  only R/3
    Hard disk minimum 160GB best 250 GB
    Ram: Minimum 1 GB  U can run in 512MB  alos
    Processor : Minimum  PIV
    DVD Drive
    Remaining Normal

Maybe you are looking for

  • Trouble connecting Windows 7 PC to Airport Extreme

    I cannot get my work pc to connect wirelessly to the Airport Extreme.  PC connects fine via ethernet.  All other devices in the house are Apple and work fine. Thanks

  • How to use SSL certificates in OSX Server

    I have setup OSX server with a host name that is pointed properly to my OSX server. My question is about using certificates that were purchased through my domain registrar. I bought a cert and after the validation process, I was given a link to downl

  • From FCP-X trial to Fullversion

    After I worked with the trial version I bought today the Fullversion. But how can I transfer my work from trial? Please help.

  • EJB QL-What does the Object keyword in select clause do ?

    I always wondered when do you need to use the Select object( ) keyword ? I read this: [http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/EJBQL5.html#73030] but didn't find it very clear. Cheers, Michal

  • Get rid of padding.

    How do I get rid of padding so the uploaded fill file populates the whole page? I want the uploaded image to fill the entire page, content area and background fill as well.