Minimum rights for remote view/control

I am in the process of cleaning up rights in my eDirectory because our last Novell admin was quit liberal with assigning rights. What I need to know is what are the minimum rights needed to remote view a workstation and what the minimum rights needed to remote control a workstation. I have been searching Google and the forums for a while with no luck.

Originally Posted by mbreiden
On Wed, 30 Jul 2008 15:16:02 GMT, geistc wrote:
[color=blue]
write to the action you want to allow
read to mac address
DIDAS AG
Thanks for the quick response.
I ran through the wizard and then looked at rights it gave the account. It looks like the attributes are as follows:
Remote Control:
DM:Remote Control -- write
WM:Network Address -- read
Remote View:
DM:ZEN Remote View -- write
WM:Network Address -- read
The only thing I wanted to verify was, do I need to give those rights to the user objects as well as the workstation objects in order for this to work? I know some of the techs use C1 and right-click on the user, then select 'Remote Management'. Just not sure if I need to give rights to the user objects as well since the user will be logged in at the time the tech will be remote controlling/viewing.

Similar Messages

Right for Remote View Only?

I am using ZfD3.2sp2 with ConsoleOne 1.3.5 or 1.3.6. I have a Help
Desk
that I would like to grant Remote View of a group of workstations. I
am
able to remotely control workstations as administrator. I have
checked
Remote Operator tab and the users show with Remote View and I have
granted
read right to the WM:Network Address property and write to the DM:ZEN
Remote View property of the Workstation object. I am able to ping the
workstation but receive a failure due to rights issue.
Can anyone tell me what rights I really need to allow a non-admin the
ability to RC a workstation?
Thanks,
Rob Bennett

Rob,
How about this one?
http://support.novell.com/cgi-bin/se...?/10087662.htm
Also, there is wizard that does this for you under c1, tools.
Jared L Jennings, CNE
Novell Support Forums SysOp.
http://support.novell.com/forums/faq_nntp.html
Posting with XanaNews Reader 1.15.8.4
Geek by Nature, NetWare by Choice.

Help networking a Security System DVR for remote viewing

Hey,
I am trying to network my Security System DVR for remote viewing but cannot seem to get it working. I have read some post on this site as well as many others and followed instructions to the T but to no avail.
Here's what I've got:
Linksys WRT54G2 V1 connected to a modem.
My DVR has 3 settings for networking:
-PPPOE
-Static
-DHCP
On DHCP, The DVR automatically sets these settings:
IP Address: 192.168.1.100
Subnet: 255.255.255.0
Gateway: 192.168.1.1
and then the DNS is the same as the one on the "status" area of the router settings...
Port: 10000-10020
I set up port forwarding for 192.168.1.100 for port 10000-10020 selecting "both"
If I pull up the "DHCP Clients Table" it shows the above IP Address but with no name....and the MAC address is something like ee:ee:ee:d4:03:5f.
I have tried to change the DVR to Static and do everything manually but thats not working either.
I created a Dynamic DNS with goddns.org but the DVR seems to have its own one built in that you cannot change. (at the bottom of the network settings it says something like "URL: 123484984.goddns.org----Status: OK." But when I try to type that in the address bar of IE it goes no where.)
I hope someone can tell me why its not working.... It was working when we first got everything set up...then it stopped. then I messed with it and got it working but didn't know what I did. Now its broken again and I don't know what to do.
-Ian
PS. When I am connected to the router via LAN cable and I type the internal IP Address assigned to the DVR by the DHCP (192.168.1.100:10000) it brings up the DVR menu perfectly. But when I try to log into it from a different location...with the external IP address...thats when I have trouble. I do not think my external IP has changed since I got this router set up.
Any help would be awesome.

Hmmm... Did that and I can't seem to get it working still. Whats weird is that as long as I am connected to the router...I can access it through the internal IP address.... (if using DHCP its 192.168.1.100:10000 and if using static its 192.168.1.99:10000)
Those both work when set up on DHCP for the first and Static for the second. But as soon as I type the external IP address with the port it doesn't work. Its like there is a firewall OR the port forwarding is not working. But everything on the port forwarding page looks good... Its enabled, set on Both, correct port range... 10000-10020...
Any Ideas?
-Ian

Expand=false for Tree view control

Hi
I have a placed a tree view control on SharePoint 2010 master page and given sitemap as a datasource.
and my tree view is displaying all the links from sitemap file.
But here the problem is all the node are getting expanded.
Is there any way to disable that.

Assuming you are using SPTreeview control you can set ExpandDepth property. This property gets or sets the number of levels that are expanded when a TreeView control is displayed for the first time.
Example: http://msdn.microsoft.com/en-us/library/ms466994(v=office.14).aspx
Amit

CRVS2010 beta - ReportSource Property for new Viewer-Control for WPF

Hello,
I use the new Crystal Reports for Visual Studio 2010 Beta. There is a new Viewer-Control for WPF.
But I don't know, where to specify the ReportSource.
Thanks
Peter
Added the info into the subject line for this beta
Edited by: Don Williams on Jun 30, 2010 8:21 AM

Hi,
O.K., in this way I can set the ReportSource Property, but if I use the load-method, the compiler don't "know" about the properties of the specific report.
The code
For Each crReportObject In rd.Section4.ReportObjects
brings the message
Fehler 16 "Section4" ist kein Member von "CrystalDecisions.CrystalReports.Engine.ReportDocument". C:\VS2010\... 484 40 WpfBudget
An other problem is, that "C:\Users\aTai\Documents\Visual Studio 2010\Projects\CrystalReportWpfApplication1\CrystalReportWpfApplication1\CrystalReport1.rpt" don't exist on an user computer.
Thanks
Peter

AVMS - No Network settings to allow for remote viewing

Hi,
I've setup a new PC with the latest AVMS to test the app versus the old one. I setup the server component and it runs fine but when I try to access it remotely via the client app, I cannot contact the server.
Checking the in documentation it says to go into the Main Console, and in the setup menu select Network Server to enable it. The problem is mine is greyed out.
I am just using the basic license for less than 16 cameras.
Did I miss something on install?
Thanks in advance,
Bob James

I think I figured it out; I activated the Basic license, you need Basic Plus or Advanced to have these features.
So I put it back to activating the trial and I get the network connection. I tested and Remote viewer works.
Looking at pricing I almost fell off my chair; $1100 for Basic Plus licensing?!
I mean I want to see the viewer from another computer, but for that much I'll just RDP into the box and watch the real viewer....
Wow, what's up with the prices...
Bob

Effective Rights for Remote Management

How are an Administrator's Remote Management rights determined with regard to devices and users?
If an Administrator has Remote Control rights to a device, should they be able to remote control that device no matter what user is logged into it?
Conversely, if an Administrator has Remote Control rights to a user, should they be able to remote control that user no matter what device the user is logged into?
Thanks.

Michelsr,
it's the most restrictive combination that's effective - allowing
things like:
1) you have a device policy that says "allow", but the CEO logins in
and his policy is set to "deny", then you cannot remote control him
2) you have machines that contain sensitive information, so they have a
policy that says "deny", and a user logs in that has a policy that says
"allow", you cannot access that session.
Shaun Pond

How to forward port for remote viewing...?

Since getting a Time Capsule I have been unable to use my SlingBox remotely. After doing some research I figured out that I have to forward a port...but i have no idea how...or what port to forward.
Can someone help me out here?

Use Airport Utility. Click on the Manual Setup button, then click on the Advanced icon in the toolbar. Click on the Port Mapping tab then click on the [+] button to add a new configuration. Use port number 5001 for both TCP and UDP ports in the Public and Private fields. Use the IP address you have assigned to your Airport Express that you've connected to the Slingbox. You will find this all outlined in the Slingbox documentation PDF that came with the device. You can also find it at the Slingmedia website.

Using your WVC54GCA camera with TZO DDNS for Remote Viewing

Hi All, for those of you that have the new Linksys Wireless-G Internet Home Monitoring Camera, we posted a new tutorial on the TZO site to walk you through signing up for your free year of TZO included with the camera.
View the Tutorial here
We love this camera and if you have an older WVC54GC you definitely want to check this new WVC54GCA camera out. It streams video and audio, and works in firefox as well (video only). You can also do a snapshot JPG with it via a direct URL, and it also does motion detection and can even send a mobile video format to your cell phone!
Message Edited by TZO-Dot-COM on 01-11-2008 10:45 AM

TZO-Dot-COM wrote:
Hi All, for those of you that have the new Linksys Wireless-G Internet Home Monitoring Camera, we posted a new tutorial on the TZO site to walk you through signing up for your free year of TZO included with the camera.
View the Tutorial here
We love this camera and if you have an older WVC54GC you definitely want to check this new WVC54GCA camera out. It streams video and audio, and works in firefox as well (video only). You can also do a snapshot JPG with it via a direct URL, and it also does motion detection and can even send a mobile video format to your cell phone!
Message Edited by TZO-Dot-COM on 01-11-2008 10:45 AM
Hello,
You mentioned that a snapshot url can be done with this camera as well.
Can you please explain how?

What is a good design for remote Views?

Hi All,
I am thinking how would I design my process for performance consideration in retrieving dynamic values of table/view data.
The requirement is like this:
1. We have 50 databases residing on each own server counterpart (50 servers).
2. Each database has table Patch_LeveL (apps_name, patch_level), which contains just one row only to reflect the latest patch level applied for the apps on this database. Note that are we constantly on applying service packs for this apps.
3. On our central monitoring server (db). I create 50 database LINKS for each of the 50 databases.
4. I created 50 views over these links to make it centralized to represent the 50 Patch_Level tables. As patch_level_view1, 2, 3.....patch_level_view50.
5. I then create a central view as .... as union of the 50 individual views Actually I am just planning to do the above activity.
My question is....is this a good design for performance? Can you share be a better approach?
Is there a limitation of joining "union" of 50 views?
Thanks a lot,

Is there a limitation of joining "union" of 50 views?What can happen is if the connection to one of these servers is interrupted, the big "union" view will not work. As said by above poster MV, with lets say an hourly refresh, helps with this situation as you have the data that was gathered last time (and most likely it is still valid).

How to improve lag time for WVC-210 for remote viewing

Hi,
My 2 camera WVC-210 is all setup. When I operate the camera remotely, I instanly hear the lens motor operate but there is aproximately 30 to 60 seconds lag time before the video is refreshed. This can be very frustrating at time. I have both cameras set up wireless.
Can somebody first explain to me why this happens and what I can do to improve the lag time. Perhaps I should tweak some settings. I would also consider buying what ever gadget is needed to make it work better.
Just to review my problem. Sound is instant but video lags.
Thank you all in advance,
Rod

May I ask if this is also happening if you’re not viewing the camera remotely? Have yoy tried adjusting the sensitivity of the WVC210?

Connecting DVR to Airport Extreme for remote viewing of my home 16 camera system. I have tried for 2 days and still stuck. I have secured a dyndns account and have had no luck for 2 days. A detailed list for an amateur would be much appreciated.

I have been trying for 2 days to connect my home camera dvr to the internet through my Airport Extreme. I have read several previous posts on this topic and have not been able to get this completed. I secured a Dyndns account and registered a host domain. I am not clear on which ip address to use and really which is which. Seems like the ip address for the router is different from the ip address that showed up when I secured my dyndns host name. I used the one that was listed on the signup that staed " your ip address is". I have read up on port forwarding and watched UTube and still no luck. Can someone walk me through a steo by step process on how to get this completed? I want to be able to watch my cameras from my iphone, ipad, macbook pro and the internet. I do have a manual that came with the DVR but it seems everything is setup for Windows and a different router, seems like the AE router had different settings. I can usually figure these things out eventually but I am really stuck this time. Any help at all would be greatly appreciated. Thank you in advance for any help you can offer.

Have you had any luck? I am currently attempting to do the same thing and running into similar issues.

Event log of remote view/control

Is it possible to have zenworks not log a remote session in the target
machines event log?

Shaun Pond wrote:
> Patrick,
>
> with ZDM7SP1, yes http://www.novell.com/support/search...%200%209955870
> otherwise no, sorry
>
My workaround was to clear the application log via a command line tool
in the login script :)

WVC80N software "unable to set up remote viewing" with TZO

I've researched this all night and I'm now begging for help.
I've got the camera all set up and I can view it while on the local network. The problem comes in when I try to sign up for the 90-day free TZO trial that comes with the camera to try to get remote viewing on my iPhone. I progress through the Linksys setup software (as is detailed here: http://www.tzo.com/MainPageSupport/HowToPage/LinksysHomeMonitoringNCameraTutorial.html) and between steps 7 and 8, I get a screen that says "Unable to set up remote viewing" with my network, click this link to learn how to remotely view your camera. The link takes me to a page on the TZO site that says "Oops, there was an unknown error with setting up you camern for remote access" and nothing else. It seems to die on the "Configuring Internet Server" step.
Within the camera's setup page, there's a link to the TZO website that tells me that because I have a WVC80N, I have to use the setup CD to set up the 90-day free trial, which fails as described above.
I've set the camera to have a fixed IP of 192.168.1.200
I've set the Alternative Web Access Port to 1024
In Port Range Forwarding in the router, I've set 1024 to 1024 to forward to 192.168.1.200 (not sure exactly what this does)
The router is a WRT160N
Any ideas?

Have you tried getting in touch with TZO and set the DDNS up the old fashioned way? I also know that TZO has a beta going on of a new IP camera application for remote viewing and this may also help. Not sure why the setup is failing though, but oook is probably right, something wacky with the router, IP or ISP that the setup software just doesn't like.
http://www.MyHomeServer.com
Linksys IP camera reviews, Tutorials and How-To's on Web & Mobile Streaming

How to set the font for table view contol

Dear All,
My requirement is to set Font type = Arial and size=1 for
Table View control. The same font should be for header, Rows and footer.
One way we are achieving it through the Renderer class. Where in we are we are supplying data, colums with html font tags.
Is there any simple way to fix font fot the entire TableView.
Thanks
Markandeya

An approach I've used is to override the CSS styles by adding code like the following to the top of the JSP page. It's a bit of a hack, but it did the job. You will need to find ALL the styles used in a table view, and override the font size.
<%-- OVERRIDE SOME CSS STYLES SO WE HAVE THE DESIRED TABLE CELL PADDING --%>
<style>

</style>

Minimum rights for remote view/control

Similar Messages

Maybe you are looking for