Minimum Server requirement SAP A1 5 users

Hello guys,
We want to implement a SAP A1 (MySAP 4.7) IDES version for 5 users. We have a HP server with 2 GO RAM and 200 GO of HDD. Will it fit ?
Tkx for your help.
Marcous

Similar Messages

NCS VM Minimum Server Requirements

Cisco's NCS Small Virtual Appliance Requirements as per below allow monitoring of up to 3000 access-points. We only need to monitor <400 Access-Points, 4 x WLC's and <25 autonomous access-points and I am wondering is anyone has deployed NCS on VM with less than the small virtual appliance requirements to monitor only a small number of AP's and WLCs?
Minimum server requirements for deploying NCS Virtual Appliances
Cisco Prime NCS Large Virtual Appliance:
• Up to 15,000 lightweight access points, 5000 autonomous access points, 1200 wireless LAN controllers, and 5000 switches or up to 5000 routers
• Minimum RAM: 16 GB
• Minimum hard disk space allocation: 400 GB
• Processors: 8 cores, at 2.93 GHz or better
Cisco Prime NCS Medium Virtual Appliance:
• Up to 7500 lightweight access points, 2500 autonomous access points, 600 wireless LAN controllers, and 2500 switches or up to 2500 routers
• Minimum RAM: 12 GB
• Minimum hard disk space allocation: 300 GB
• Processors: 4 cores, at 2.93 GHz or better
Cisco Prime NCS Small Virtual Appliance:
• Up to 3000 lightweight access points, 1000 autonomous access points, 240 wireless LAN controllers and switches or up to 1000 routers
• Minimum RAM: 8 GB
• Minimum hard disk space allocation: 200 GB
• Processors: 2 cores, at 2.93 GHz or better

Hello,
I am not sure about NCS but I have tried another Cisco product that can be purchased as an applicance or installed virtually. It had minimum requrements of RAM and desk space.
When I treid to install it on a virtual machine it complained about desk space. it could not be installed until I - virtually - assigned the needed minimum desk space to the virtual machine.
For the RAM however it did not complain although it was less than 1/4 of the minimum requirement listed in the document.
HTH
Amjad

Wiki Server Requires "All logged in users" set to R&W

I continue to try and resolve spurious issues and unpredictable behavior. Now, I'm trying to rebuild a group wiki page because I could not control any of the permissions on the existing page. The purpose of the wiki is only to provide a shared calendar among a small subset (call them managers) of the users in the workgroup.
In order to make it so that "managers" would be the only people who could read and write to this calendar, I tried to set the wiki permissions to support this:
     managers                         read & write
     all logged in users              read only
     all unathenticated users     no access
I could not get this to work. The only way I can get it so one of the users in the manager group can create or edit events in the calendar is if I have "All logged in users" set to read and write, which to me defeats the purpose of groups.
Either something is still jacked up with my wiki permissions (I did migrate from SLS quite some time ago but have never felt everything was working really reliably) or I am misunderstanding how the wiki permmissions are supposed to work.
Can someone help me with this, please?

Having the same problem. I'd be interested in know if you managed to resolved this?

OBIEE 11.1.1.7 Server Requirements

Hi All,
I am looking for OBIEE 11.1.1.7 minimum Server requirements (CPU Cores, RAM & Disk space). I have check the OBIEE 11.1.1.7 documentation, but it redirected to Middleware documentation, i have checked the same there, but i couldn't get the proper information. Could anyone help me on this one.
Thanks

check in here Oracle® Fusion Middleware System Requirements and Specifications

Server Requirement for Installing BPC

Dear all,
What are the minimum server requirements for installing BPC in RAM, Speed and hard disk size? Is there anything else that i should be aware of?
Thanks in advance for your help.
Cheers

Hi,
If you are going to use Audit Collection Services (other methods to collect event logs can also refer to requirements below), here are some requirements:
A member of an Active Directory domain
A minimum of 1 gigabyte (GB) of RAM, with 2 GB recommended
At least a 1.8 gigahertz (GHz) processor, with a 2.8 GHz processor recommended
10 GB of hard disk space available, at a minimum, with 50 GB recommended
More information for you:
Collecting Security Events Using Audit Collection Services in Operations Manager
https://technet.microsoft.com/en-us/library/hh212908.aspx
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

What are the minimum hardware Server requirement for SAP BI BO

I would be thankful if someone can please tell me What are the minimum hardware Server requirement for SAP BI BO. if a separate Desktop is used for the server or local server purpose.
In the Desktop
I have 8 GB RAM
2.60 Ghz Processor ( CPU)
System type: 64 bit OS
regards
ranendra

Hi,
Refer the attached PAM for BO 4.0 and 4.1.Minimum hardware details are listed there.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0134dbb-8f10-3010-5084-cf90dbb35284?QuickLink=index&overridelayout=true&58879706677537
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/507d3365-009b-3010-04b0-e5abc8f00c91?QuickLink=index&…
I haven't try with your similar specification but in the below link some one tried with similiar one.
What are the minimum system requirements to install SAP BO 4.0/4.1
Amit

Minimum hardware requirement for Report server with 4 engines ??

Hello all ,
Can someone please tell what is the minimun Hardware requirement to be able to run a Oracle 91 AS with report server having 4 engines ??
and where I can find this kind of documentation.
We have a Oracle9iAS Containers for J2EE running on a machine with under 1 ghz power and around 300 mb RAM
, but the report server seems to keep crashing ..
Can anyone pls advice
Thanks

Hi,
For calculating the minimum hardware requirements, you may need to look at various factors:
1. No of reports requests that need to be processed per second
2. Whether all these requests are synchronous or asynchronous
3. Response time required
4. Type of reports - large amounts of data, large no of images, etc
5. How much caching you are using
6. No of queries in your report
7. Simple / complex layout of the report
and so on.
So just the information of 4 engines may not be sufficient for trying to calculate the hardware requirements. One useful reference point for you may be the Oracle9i Reports Scalability whitepaper:
http://otn.oracle.com/products/reports/index.html
It lists the number of users supported on some pre-defined hardware configurations, and the average response time for the reports server.
You might also want to take a look at the paper on "Tuning Oracle Reports":
http://otn.oracle.com/products/reports/htdocs/search.html?cat=SAP&col=ALC&submit=Search
However, it is also possible that your Reports Server is crashing due to some other problem (not the hardware configuration).
By the way, your RAM seems to be too low for Oracle9iAS installation. See the installation guide for minimum hardware requirements.
Navneet.

Minimum Hardware Requirement for SAP Business One For HANA

Hello EveryOne,
I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
Is it can install on laptop or I need to buy giant server.
Thanks in advance

Hi Idrees,
Check following links:
http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
Hope it helps.
Thanks & Regards
Ankit Chauhan

There is no Resolve Manager of User (Requires SAP HR) object

Hi,
I'm trying an exercise by following .pdf document.
There is Resolve Manager of User (Requires SAP HR) object in .pdf document, but there is no this object in our portal.
Guided procedures --> Design Time --> Create Callable Object --> User Mangement ==>Resolve Manager of User (Requires SAP HR)
How can i get this object present in our portal?
Class: com.sap.caf.eu.gp.callobj.manager.SAPHRManagerResolveCO
Container: cafeugp~actions
Thanks.

The security system requires that directories (of what type I don't know) be downloaded to the local client. Previously, we just copied the existing default localhost, changing the IP from 127..*. to the IP of the server given us by the security company, and gave that IP a name like c0000013***.&^%.local. Finally, we set this as type: server. Apparently, the security system downloads data to the localhost, interprets it, then gives us a security signon. To further complicate matters, the company that wrote the software has just been bought and the new guys don't seem to have a clue what they've gotten themselves into.
If is just substitute the IP and server name, i.e. 100.100.100.100/c0000013***.&^%.local in the browser, the page times out because the page contains a crossdomain.xml call to the authorization data that's already supposed to be stored in the localhost, and of course, it can't find it. I've looked at Window>Activity in Safari on computers that still work on the system, and they don't have the crossdomain.xml problem because they've already logged into the system the first time, downloaded whatever it is they need, and then when they access the page again, the local data are combined with the page and we're presented with.
No one at the new security company can even explain what they're supposedly downloading in the crossdomain.xml.

(Deployment) Minimum Software required for BUILD server and IIS WebServer

We have a simple .Net SDK application written using VB-2005 and the Crystal Reports XI (R2) DEVELOPER package.
The RPT files are posted on our BOE-XI (R2) server, and are called using the View-On-Demand method from the Page Server (similar to the SDK sample application). At some point in the future, our .Net applications may invoke some of the other SDK content types.
In our environment, the .NET web-applications are checked-in to Clear Case, and then sent to a stand-alone BUILD server to be compiled. The compiled .NET web-applications are then posted to a stand-alone IIS WebServer (not the IIS server that hosts BOE InfoView/CMC).
The BUILD server and IIS WebServer have to be as "stripped-down" as possible in order to go through our QAT and Impact Analysis process.
So far we have had success if we deploy the SDK-only install from the Crystal Reports XI (R2) DEVELOPER package, and the service packs, but it doesn't include all the SDK components for other BOE content types.
If we deploy the Client-only install from the BOE-XI (R2) package, and the service packs - it doesn't seem to include the CR-Viewer which we need. But it does includes a bunch of extra software (eg. UNIVERSE DESIGNER) on the desktop of the BUILD server and IIS WebServer that our QA guys don't like.
What are the Minimum Software required for BUILD server and IIS WebServer to support CR and BOE SDKs...?
Are there any install packages that contain JUST those components, and not all the extra software that is not needed to Build/Deploy in .NET...?
Thanks in advance for the advice.

Due to the CrystalDecisions.web.dll for the 2.0 framework being left off the BOE CD you will need to install the Crystal XI R2 runtimes as well as the BOE SDK.
To get the BOE SDK launch the Enterprise XI R2 installer and choose Server Install - not Client Install. Choose a Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install it.
Jason

What is the minimum permission required to discover the Farms in the Sahrepoint Server?

What is the minimum permission required to discover the Farms in the SahrePoint Server?
Do I need to have the access to the SharePoint Database?
I want to do this with help of a 3rd Party API.
Thanks
psarroj

Access to SharePoint doesn't necessarily give access to the SharePoint databases. See Add-SPShellAdmin description.
https://technet.microsoft.com/en-us/library/ff607596.aspx
Permissions on the databases themselves is often required when accessing SharePoint information programmatically.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

How to create user other than 'sa' to connect database server in SAP SBO

I want to ask how the step for create user other than 'sa' to connect database server in SAP SBO? Until now I use 'sa' (default) for connect to database server in SAP SBO application.
Can I do that?

You may create multiple SQL users to give full right to B1 database instead of using 'sa' user.
However, the preferred way would be by Use Trusted connection when you set the connection to SQL Server. In this way, you just need one more user for SQL. A group of window users could use this SQL access to connect database server.
Thanks,
Gordon

How to access Sap portal login user in ejb web service

Hi,
I wnt to access SAP Portal login user in my ejb application which resides on the same server.
I am using following code
try {
     IUser user =null;                         IWDClientUser wdUser = WDClientUser.getCurrentUser();
                              user = wdUser.getSAPUser();
                         } catch (WDUMException e) {
                              // TODO Auto-generated catch block
                              e.printStackTrace();
Some additional jar files are required for this?
The same code works fine with webDynpro but not with ejb.
Thanks in advance
Best regards,
Nilesh

Thanks for reply.
I have already added com.sap.security.api in my EJB module project classpath. How to add the same in EJB application Project (application-j2ee-engine.xml)?
Best regards,
Nilesh

Copy file from FTP server to sap application server

Hi,
I am able to copy a particular file from FTP server to sap application server using FTP_CONNECT, FTP_COMMAND and FTP_DISCONNECT. But here my problem is, it copies into default application server path(DIR_HIOME). I want to copy into specified folder in the application server. How can I specify the required destination path.
Can you please suggest how to achieve this.
Thanks,
Shiva Kankanala

try something like this:
data: user(30) type c value 'ftpuser', "ftp username
              pwd(30) type c value 'ftppass', "ftp password
              host(64) type c value '255.255.255.255', "ftp server IP
              cmd1(80) type c value 'lcd /dump', "location on app server where you want to copy the file
              cmd2(80) type c value 'get', "specifies you are going to get the file from ftp server
              dest like rfcdes-rfcdest value 'SAPFTPA',
              file(15) type c value 'file.txt'. "specifies file that you want to get from ftp server
data: hdl type i,
        key type i value 26101957,
        slen type i.
slen = strlen( pwd ).
call function 'HTTP_SCRAMBLE'
    EXPORTING
      source      = pwd
      sourcelen   = slen
      key         = key
    IMPORTING
      destination = pwd.
call function 'FTP_CONNECT'
    EXPORTING
      user            = user
      password        = pwd
      host            = host
      rfc_destination = dest
    IMPORTING
      handle          = hdl.
call function 'FTP_COMMAND'
    EXPORTING
      handle        = hdl
      command       = cmd1
    TABLES
      data          = result
    EXCEPTIONS
      command_error = 1
      tcpip_error   = 2.
loop at result.
    write at / result-line.
endloop.
CONCATENATE cmd2 file INTO cmd2 SEPARATED BY SPACE.
call function 'FTP_COMMAND'
      EXPORTING
        handle        = hdl
        command       = cmd2
      TABLES
        data          = result
      EXCEPTIONS
        command_error = 1
        tcpip_error   = 2.
    loop at result.
      write at / result-line.
    endloop.
    refresh result.

Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

Dear all,
I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
I know there are 3 options for digital signature and
System signature with authorization by user ID and password (We use this currently)
Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
User signature without verification
Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
My active directory is based on Windows 2008.
Thanks in advance!!
Dhee

Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

Minimum Server requirement SAP A1 5 users

Similar Messages

Maybe you are looking for