Minimum version of the database that can be directly upgrade into 11G2

Dear DBA's,
Where can I find a document from Oracle showing/proving I can upgrade directly from 9.2.0.6 intoi 11.2.0.1?
Txs for your help
Rgds
Carlos

okKarol wrote:
Dear DBA's,
Where can I find a document from Oracle showing/proving I can upgrade directly from 9.2.0.6 intoi 11.2.0.1?
Txs for your help
Rgds
CarlosIn the 11.2 Upgrade Guide, found at http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/preup.htm#i1007814
Or simply go to tahiti.oracle.com, where you will find all of oracle's doc libraries. Drill down to your product and version. The you will find the complete doc set for that product/version, including installation and/or upgrade guides.

Similar Messages

Can we directly upgrade to ios 8.0.2 from ios 7.1.2

Hello
I have an iphone 5c and is currently having ios 7.1.2
I have some doubts running through my mind.I know these are a bit awkward questions but this is my first iphone and hence the reason
1-can i directly upgrade to ios 8.0.2 from ios 7.1.2
2-will I lose my apps which are currently on my phone after the upgrade?
3-is it worthy to upgrade to ios 8.0.2 as I am hearing some bad reviews about the upgrade or should i wait for the next roll out?
Sorry for my bad english
Thanks in advance

1. Yes.
2. No.
3. There are large numbers of bad reviews for every upgrade and there will be for the next one also.

What version of ipad 4g shoud i buy here in the US that can work in the philippines local data provider? at

what version of ipad 4g shoud i buy here in the US that can work in the philippines local data provider? at&t or verizon? any idea anyone?

Ah, I see, ask your provider what type of cell service they use the following outlines what the two iPads offer.
Model for AT&T: 4G LTE (700, 2100 MHz)3; UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
Model for Verizon: 4G LTE (700 MHz)3; CDMA EV-DO Rev. A (800, 1900 MHz); UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
Also ensure you don't buy a carrier locked/subsidized iPad. Buy it free and clear without a contract so you can use it on your terms.
I know a lot of internal providers have pay as you go data SIMs and you can basically swap these out as you travel between different countries.

Fatal Error: The schema version of the database is from a newer version of WSUS

Hello,
CM2012 R2 RTM on Server2012 R2 RTM with SQL2012 SP1
installed SQL, WSUS and then CM.
When finished adding WSUS, there was a post installation message but I skipped it and continued to CM installation, as suggested on some blogs. WSUS in CM seems to be a real mystery... and there are multiple workarounds and suggestions.
Now my CM is ready to GO. Configured discovery, boundaries. All components appear green OK. My hand shaked when I click on post Deployment message related to WSUS in server manager. So I clicked it. And received: Post Deployment Failed. There is
a path to log file. The error:
Fatal Error: The schema version of the database is from a newer version of WSUS
than currently installed. You must either patch your WSUS server to at least
that version or drop the database. WSUS was installed with SQL DB.
What do you suggest?
Thanks.
Please see full log:
2013-12-01 06:58:24 Postinstall started
2013-12-01 06:58:24 Detected role services: Api, Database, UI, Services
2013-12-01 06:58:24 Start: LoadSettingsFromXml
2013-12-01 06:58:24 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentLocal
2013-12-01 06:58:24 Value is true
2013-12-01 06:58:24 End: GetConfigValue
2013-12-01 06:58:24 Start: GetConfigValue with filename=UpdateServices-Services.xml item=ContentDirectory
2013-12-01 06:58:24 Value is D:\sources\wsus
2013-12-01 06:58:24 End: GetConfigValue
2013-12-01 06:58:24 Content directory is D:\sources\wsus
2013-12-01 06:58:24 Start: GetConfigValue with filename=UpdateServices-DB.xml item=InstanceName
2013-12-01 06:58:24 Value is confman
2013-12-01 06:58:24 End: GetConfigValue
2013-12-01 06:58:24 SQL instance name is confman
2013-12-01 06:58:24 End: LoadSettingsFromXml
Post install is starting
2013-12-01 06:58:24 Start: Run
2013-12-01 06:58:24 Fetching WsusAdministratorsSid from registry store
2013-12-01 06:58:24 Value is S-1-5-21-1033354796-2088831985-1429053453-1003
2013-12-01 06:58:24 Fetching WsusReportersSid from registry store
2013-12-01 06:58:24 Value is S-1-5-21-1033354796-2088831985-1429053453-1004
2013-12-01 06:58:25 Configuring content directory...
2013-12-01 06:58:25 Configuring groups...
2013-12-01 06:58:26 Starting group configuration for WSUS Administrators...
2013-12-01 06:58:26 Found group in regsitry, attempting to use it...
2013-12-01 06:58:28 Writing group to registry...
2013-12-01 06:58:28 Finished group creation
2013-12-01 06:58:28 Starting group configuration for WSUS Reporters...
2013-12-01 06:58:28 Found group in regsitry, attempting to use it...
2013-12-01 06:58:28 Writing group to registry...
2013-12-01 06:58:28 Finished group creation
2013-12-01 06:58:28 Configuring permissions...
2013-12-01 06:58:28 Fetching content directory...
2013-12-01 06:58:28 Fetching ContentDir from registry store
2013-12-01 06:58:28 Value is D:\sources\wsus
2013-12-01 06:58:28 Fetching group SIDs...
2013-12-01 06:58:28 Fetching WsusAdministratorsSid from registry store
2013-12-01 06:58:28 Value is S-1-5-21-1033354796-2088831985-1429053453-1003
2013-12-01 06:58:28 Fetching WsusReportersSid from registry store
2013-12-01 06:58:28 Value is S-1-5-21-1033354796-2088831985-1429053453-1004
2013-12-01 06:58:28 Creating group principals...
2013-12-01 06:58:28 Granting directory permissions...
2013-12-01 06:58:28 Granting permissions on content directory...
2013-12-01 06:58:29 Granting registry permissions...
2013-12-01 06:58:29 Granting registry permissions...
2013-12-01 06:58:29 Granting registry permissions...
2013-12-01 06:58:29 Configuring shares...
2013-12-01 06:58:29 Configuring network shares...
2013-12-01 06:58:29 Fetching content directory...
2013-12-01 06:58:29 Fetching ContentDir from registry store
2013-12-01 06:58:29 Value is D:\sources\wsus
2013-12-01 06:58:29 Fetching WSUS admin SID...
2013-12-01 06:58:29 Fetching WsusAdministratorsSid from registry store
2013-12-01 06:58:29 Value is S-1-5-21-1033354796-2088831985-1429053453-1003
2013-12-01 06:58:29 Content directory is local, creating content shares...
2013-12-01 06:58:29 Creating share "UpdateServicesPackages" with path "D:\sources\wsus\UpdateServicesPackages" and description "A network share to be used by client systems for collecting all software packages (usually applications)
published on this WSUS system."
2013-12-01 06:58:29 Deleting existing share...
2013-12-01 06:58:29 Creating share...
2013-12-01 06:58:29 Share successfully created
2013-12-01 06:58:29 Creating share "WsusContent" with path "D:\sources\wsus\WsusContent" and description "A network share to be used by Local Publishing to place published content on this WSUS system."
2013-12-01 06:58:29 Deleting existing share...
2013-12-01 06:58:29 Creating share...
2013-12-01 06:58:29 Share successfully created
2013-12-01 06:58:29 Creating share "WSUSTemp" with path "C:\Program Files\Update Services\LogFiles\WSUSTemp" and description "A network share used by Local Publishing from a Remote WSUS Console Instance."
2013-12-01 06:58:29 Deleting existing share...
2013-12-01 06:58:29 Creating share...
2013-12-01 06:58:29 Share successfully created
2013-12-01 06:58:29 Finished creating content shares
2013-12-01 06:58:29 Stopping service WSUSService
2013-12-01 06:58:29 Stopping service W3SVC
2013-12-01 06:58:32 Configuring database...
2013-12-01 06:58:32 Configuring the database...
2013-12-01 06:58:32 Establishing DB connection...
2013-12-01 06:58:32 Checking to see if database exists...
2013-12-01 06:58:32 Database exists
2013-12-01 06:58:32 Switching database to single user mode...
2013-12-01 06:58:32 Loading install type query...
2013-12-01 06:58:32 DECLARE @currentDBVersion       int
DECLARE @scriptMajorVersion     int = (9600)
DECLARE @scriptMinorVersion     int = (16384)
DECLARE @databaseMajorVersion   int
DECLARE @databaseMinorVersion   int
DECLARE @databaseBuildNumber    nvarchar(10)
IF NOT EXISTS(SELECT * FROM sys.databases WHERE name='SUSDB')
BEGIN
    SELECT 1
END
ELSE
BEGIN
    SET @currentDBVersion = (SELECT SchemaVersion FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
    SET @databaseBuildNumber = (SELECT BuildNumber FROM SUSDB.dbo.tbSchemaVersion WHERE ComponentName = 'CoreDB')
    DECLARE @delimiterPosition INT = CHARINDEX('.', @databaseBuildNumber)
    IF (@delimiterPosition = 0)
    BEGIN
        RAISERROR('Invalid schema version number', 16, 1) with nowait
        return
    END
    SET @databaseMajorVersion = SUBSTRING(@databaseBuildNumber, 1, @delimiterPosition - 1)
    SET @databaseMinorVersion = SUBSTRING(@databaseBuildNumber, (@delimiterPosition + 1), (10 - @delimiterPosition))
    IF @currentDBVersion < 926
    BEGIN
        SELECT 3
    END
    ELSE
    BEGIN
        IF (@scriptMajorVersion > @databaseMajorVersion OR
           (@scriptMajorVersion = @databaseMajorVersion AND @scriptMinorVersion > @databaseMinorVersion))
        BEGIN
            SELECT 2
        END
        ELSE IF (@scriptMajorVersion = @databaseMajorVersion AND
                 @scriptMinorVersion = @databaseMinorVersion)
        BEGIN
            SELECT 0
        END
        ELSE
        BEGIN
            SELECT 4
        END
    END
END
2013-12-01 06:58:33 Install type is: UnsupportedFuture
2013-12-01 06:58:33 DB is a higher version than the config scripts
2013-12-01 06:58:33 Swtching DB to multi-user mode......
2013-12-01 06:58:33 Finished setting multi-user mode
2013-12-01 06:58:33 Microsoft.UpdateServices.Administration.CommandException: The schema version of the database is from a newer version of WSUS
than currently installed. You must either patch your WSUS server to at least
that version or drop the database.
   at Microsoft.UpdateServices.Administration.ConfigureDB.CheckForUnsupportedVersion(DBInstallType installType, Boolean dbExists)
   at Microsoft.UpdateServices.Administration.ConfigureDB.ConnectToDB()
   at Microsoft.UpdateServices.Administration.ConfigureDB.Configure()
   at Microsoft.UpdateServices.Administration.PostInstall.Run()
   at Microsoft.UpdateServices.Administration.PostInstall.Execute(String[] arguments)
Fatal Error: The schema version of the database is from a newer version of WSUS
than currently installed. You must either patch your WSUS server to at least
that version or drop the database.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

Gerry,
1. I uninstalled WSUS, removed DB, restarted. And reinstall WSUS again. This time MS Management Console of WSUS could not be started. I did it after WSUS was added following your blog pix.
I checked c:\program files\update services, there were couple of missing directories by comparison what was in case when I installed WSUS after SQL but before CM: Tools, Shema, and another A.. something. I saw this issue on NOOB. And people copied these
directories from previous installation.
How we can explain this behavior on RTM version?
Then I uninstalled it again. And give another try... Here I found another interesting thing. Please compare your slide number 5 from your link and attached one. You can see that on Add Roles and Features Wizard page are missing items. Some
of them were found in next screen of my installation (I am using RTM server) but one API and Power shell cmdlets were not listed on final screen before start install. May be those are note important...
I reinstall again... and the MS Management Console fails again. Exactly the same thing that I saw during 2 weeks of trying to make works. Don't see what I can screw up here.
What about missing directories after reinstalling WSUS. Is that normal? And in IIS there is no WSUS.
I don't see here any difficult thing, just simple wizard... But it not works. Second CM server.
What I do wrong here to create a failure of MMC. There is any blog with examples of RTM Server 2012 and CM RTM. All stuff is 2012. So kind of guesses and no precise thing to do...
Sorry for my cry :). The only solution is to call MS and pay $250 for SUCH a trivial thing that not works.
Any help? Please see pics. Can you confirm that you have the same or more directories in Update Services
Thanks.
API and Power Shell Cmdlets feature missed if compare with yours slides.
"When you hit a wrong note it's the next note that makes it good or bad". Miles Davis

OWB Paris: Recommend version of the Database

Hello everybody.
I would like to know which version of the database is recomended to be used with OWB Paris. We want to use the module of this tool that allows to audit the data quality and we don't know if it's necessary to install an specific version of the database (10gR2) or it can be used with 9i.
Thanks in advance

What versions of Oracle database can I use with OWB 10gR2 Beta 3?
- Oracle Database 10gR2
- Oracle Database 10gR1 with 10.1.0.4 patchset applied.
- Oracle9i Database (9.2). Note that some OWB features are only supported on Oracle Database 10g, as detailed in the Release Notes. Oracle Database 10gR1 is strongly recommended for OWB Paris Beta.
Bye
Detlef

Knowing the exact version of the Database

i am having a hard time knowing the version of the attached database on my server.. Lets says someone created a database using sql
server version xxxx and he created a backup of that DB then he gave me. how do i find the database version then. Thanks.

>>i am having a hard time knowing the version of the attached database on my server.
USE DBNAME
GO
DBCC DBINFO() WITH TABLERESULTS
You can refer the
--dbi_version - New Version of the database
--dbi_createVersion -- The old version of the database
Just compare the output of dbi_createversion with below list to find the source database version.
http://sqlserverbuilds.blogspot.com/2014/01/sql-server-internal-database-versions.html
SQL Server Version
Internal Database Version
Database Compatibility Level
SQL Server 2014
782
120
SQL Server 2012
706
110
SQL Server 2012 CTP1
(a.k.a. SQL Server 2011 Denali)
684
110
SQL Server 2008 R2
660 / 661
100
SQL Server 2008
655
100
SQL Server 2005 SP2+
with VarDecimal enabled
612
90
SQL Server 2005
611
90
SQL Server 2000
539
80
SQL Server 7.0
515
70
SQL Server 6.5
408
65
SQL Server 6.0
60
--Prashanth

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready

I wish to use the previous version not the one that has today been automatically installed. My settings were to let me know and I decide to install when I'm ready, how do I go back. This because one of the previous Plugins does not work with this version, and they have no fix for it yet!

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

I only see trial versions of the software that I want to donwload from my adobe cloud

I hope that anybody can help me,
I have log on on my adobe cloud account and when I go to download the applications that I need (Photoshop, illustrator) I only see trial versions not the full product, can anybody tell me how can I download the full product?
Thanks

Sign in, activation, or connection errors | CC, CS6, CS5.5
Mylenium

HT1553 I want to do a clean install of Mountain Lion. Can I do this without a DVD version of the OS, and can I restore only specific things like iPhoto and iTunes libraries from Time Machine backup.

I want to do a clean install of Mountain Lion. Can I do this without a DVD version of the OS, and can I restore only specific things like iPhoto and iTunes libraries from Time Machine backup.

Mountain Lion is only available as a download, so there is no DVD to purchase. What you can do is download ML and then stop it from installing as soon as it's on your drive. From there you can make your own bootable ML flash drive.
When your purchase and download Mountain Lion, it will end up in the Applications folder and automatically want to install. Press Command+Q to stop the install and exit. The installer will remain on the hard drive.
1) Right click on the installer and choose "Show Package Contents".
2) A folder will open on the desktop. Drill down to Contents > SharedSupport and double click the disk image InstallESD.dmg to mount it on the desktop.
3) From here you can either burn a DVD, or copy the contents to a flash drive. Personally, I would strongly suggest using an 8 GB flash drive formatted as Mac OS Extended. You will be able to boot to it in about 30 seconds instead of at least 10 minutes off of a DVD, and it will install MUCH faster. Make sure the flash drive is empty, or you've copied anything off it it you need as it will need to be erased.
4) Don't just drag and drop the contents you see in the open disk image to the flash drive. It won't boot that way as it will be missing some hidden files. Open Disk Utility. You will something similar to this:
5) To accomplish the above, highlight either the flash drive's single partition (as I did), or the item at the bottom (Mac OS X Install ESD), which is what you will see with the Lion disk image mounted. It doesn't matter which one you pick. You'll then have the option to select the Restore tab towards the upper right. Drag and drop from the left column into the Source and Destination fields as shown above. If you've already erased the flash drive, you can uncheck the box. Click the Restore button.
You've just made your own bootable Mountain Lion USB Flash drive installer. Once you boot to the flash drive, run Disk Utility first to erase the drive you want Mountain Lion on, then continue with the install.
As far as restoring your iPhone and iTunes libraries, I couldn't tell you. So I wouldn't do any of the above until someone else chimes in with a way to do that after a clean install of ML.

HT4623 i could not update my divice in a latest version ,even my iphon 3gs can't get cunnect into my i tunes , how could i do that easily?

i could not update my divice in a latest version ,even my iphon 3gs can't get cunnect into my i tunes , how could i do that easily?

Change iTunes Store Country on an iDevice
1. Tap Settings;
2. Tap iTunes & App Stores;
3. Tap View Apple ID;
4. Enter your user name and password;
5. Tap Country/Region;
6. Tap Change Country/Region;
7. Select the region where you will be located;
8. Tap Done.
Also, see How to Change Your iTunes Store Account Location | eHow.com.

When I switch libraries I lose the majority of the material in my main library and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks

When I switch libraries I "lose" the majority of the material in my main library (or at least I can't see it) and can only restore it by repairing the database. Can anyone tell me why this is happening and how I can resolve the problem? Thanks

I seem to have found a way around it. Rather than switching libraries by going into files/switch libraries I used Aperture Preferences to change them. I've done it a couple of times and it appears to work OK.
That is an interesting finding. It suggests, that your "Preferences" file "com.apple.Aperture.plist" may have been corrupted and you fixed it this way. Can you now switch between libraries the usual way? If not, I'd try to remove the "preferences" file from the user library to the Desktop and relaunch Aperture.
The Aperture 3: Troubleshooting Basics:http://support.apple.com/kb/HT3805
describe how to remove the user preferences.

For iOS the ipad version shows the folio that has been published, but the iPhone app is not.

I am responsible for handling the apps and not at all involved with or know how the folio creation process works.
When I build the app for iOS the iPad version shows the folio that has been published, but the iPhone app is not showing the folio.
Is this something related to the build process or how the folio was created?
The folio also shows up in the Android app (at least the phone I have tested with).
Thanks,

"Android and iOS viewers have different requirements for displaying folios. Any folio size you create can appear in an Android viewer. The articles are scaled and letterboxed as needed. However, on the iPad, the viewer displays only folios with a 4:3 aspect ratio. The iPhone viewer displays only folios with a 3:2 or 16:9 (1136x640) aspect ratio."
Here is the entire post if you'd like to read more: Digital Publishing Suite Help | Creating documents for multiple devices

Bootcamp... what's the worst that can happen

Apple says that Windows XP install disk must have service pack 2? what happens if you use XP upgrade disk. Theoretically, the install would just ask me to insert earlier's windows CD to verify upgrade and continue the install. I've heard that a few people have been able to load XP on bootcamp without SP2 and then used Internet Explorer to download it.
Any thoughts.

The "process" to allow that sort of verificcation is not available until you completely install Windows. I know of someone who did, as you suggest, install SP1, and then upgraded it. However, there were multiple issues involved with that, and I think you would need to search out that thread to understand them, as I don't remember.
However, having said the "book version" - have you simply tried it? LOL! Who knows - it may work, and as your Subject states - What's the worse that can happen?
Bob

Edit the database that RH10 uses to generate the CPD file

Is it possible to edit the database that RH10 uses to generate the CPD file? I've got one weird entry in the topics list in the Project Manager pod. I've deleted the CPD file and let RH10 rebuild it but the entry is still there. My team leader would like me to get rid of the entry before we send the project to translation. Thanks.

Dang, I saw that same problem occur with a project I was trying to fix but eventually I had to start over on a fresh copy of the broken project and did not create the problem again.
If you are using an agency that translates and uses RoboHelp, the last thing I would have done is delete the snippet. They would have translated that once instead of everywhere it is used thus keeping costs down. That is an aside though.
Do you have a backup of the project so that you can recreate the Snippet in the hope that the project is good with that in and you can then delete again to check you used the right option?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Minimum version of the database that can be directly upgrade into 11G2

Similar Messages

Maybe you are looking for