Mininum resources for Oracle VM

Hi,
I want to know the bare minimum hardware requirement for Oracle VM setup.
1) Oracle VM server: It's mentioned in Server Installation guide that, dual core CPU and at least 1GB memory is required. Can we install oracle VM server with 512MB memory?
2) Oracle VM manager: Is it mandatory or optional component of oracle VM setup?
Many Thanks,
Neeraj

AVI, or other knowledgeable folks, I was wondering about the following:
HP 6554 with Intel Quad-core E6600 chip and 5 GB of RAM??
I know that should be sufficient if I dedicate the entire machine to OVM server. BUT I want to partiton it to run Windows natively - the current partition - and OVM server. I also may want a native Ubuntu or Fedora partition. The drive is 700 GB so space isn't an issue.
I have 2 major concerns...
-- Can I install OVM server on a 2nd or 3rd partition?? If not, can I use the 1st partition and then install other OSes afterward??
-- I realize this also asks about boot loaders
-- The reference material seems to require Intel VT extensions for HW virtualization. Would you know if the E6600 has these??
Howard

Similar Messages

Minimum resources for Oracle Application Express

Hi,
I'm new to the forum, and a bit confuse here trying to find an answer to what supposedly is a simple question:
What kind of resources do I have to have to develop and deploy screens with Oracle Application Express?
The scenario:
I have this Oracle application all created in forms that we are planning to give to our customers in a web based.
I'm looking for options to convert it and many forums are talking about how easy and inexpensive (free) the Oracle Applications Express is.
Then, talking with my main developer, he told me that in order to use it, the client need to spend quite a while in IAS (Oracle's Internet Application Server) and/or have to have the Enterprise version.
I'm looking for white papers on that and could not find any corroboration, but just texts telling that it's free and easy to use.
Any one can point me to the right directions on this issue?
Just want to know what exaclty do I need in order to use (creating and deploying) the Applications Express.
Right now I have Standar Edition 10q as well as my client
THank you

If you want to develop an intranet web application, the HTTP server that comes with Standard Edition 10q would do. However, if you are thinking of it as an internet application then you better separate DB and web server. In that case you need to have either Oracle HTTP Server or Oracle Application Express Listener. Oracle HTTP server requires a license and usually bundled with DB or an Application Server. I believe Oracle Application Server is no longer being offered/available instead web logic server is made available. The basic edition of web logic would do as all you require is Oracle HTTP Server to broker the requestes between the web and the database. As far as I know, Oracle HTTP server is not being offered standalone. As mentioned above the other alternative is Oracle Application Express Listener but requires one of the J2EE complaint web servers like web logic, Glassfish, OC4J or TOMCAT.
Hope this helps!
Chandra Movva

Resource for Oracle 11g xe

Hello,
I am looking for free study material to learn 11g xe. I am a beginner in 11g but I had Oracle DBA 8i Certification. Will someone help me?

Hello,
a good starter would always be the [url http://download.oracle.com/docs/cd/E17781_01/index.htm]XE Documentation Library, especially the [url http://download.oracle.com/docs/cd/E17781_01/server.112/e18804/toc.htm]2 Day DBA. The latter one will probably not take you two days because you already know Oracle concepts, but it might be a good idea to fresh up and see what changed since the last time you studied...
Depending on your focus, there might be other resources to point out. A good place to search for input is the [url http://apex.oracle.com/pls/apex/f?p=44785:2:5631230890156303:FORCE_QUERY::2:P2_GROUP_ID:1000]Oracle Learning Library.
-Udo

How can i give more resource for oracle user

hello
i have a database user
i want to give him more power resource from
others

You want to allocated more CPU and memory to users of the database? Or to the database processes in general?
Perhaps you should rewind a bit here and explain what (why) you think you need to add resources to something ... then we can try to solve your problem, instead of trying to fix your solution.

Setting Resource limits for Oracle user in 11gR2

HI Friends,
I am using Oracle Database 11g R2 on windows.
My Application connects to the database using a schema (user1). Some times the application user sessions makes the Database usage / CPU/ IO high and affecting the performance of the Database.
I would like to set some Limits on the Resource usage (Database and System resources) for those Application user schema (user1) to avoid the bottleneck on the Database and Server without affecting the usage of the Application on Transactions.
How can i achieve it?
Regards,
DB

839396 wrote:
HI Friends,
I am using Oracle Database 11g R2 on windows.
My Application connects to the database using a schema (user1). Some times the application user sessions makes the Database usage / CPU/ IO high and affecting the performance of the Database.
I would like to set some Limits on the Resource usage (Database and System resources) for those Application user schema (user1) to avoid the bottleneck on the Database and Server without affecting the usage of the Application on Transactions.
How can i achieve it?
Regards,
DBis application 3-tier like below?
EndUser<=>browser<=>WebServer<=>ApplicationServer<=>DatabaseServer

Embedded License Resource Kit for Oracle Application Server 10g

Hi,
I work for a company and we are an Oracle partner. We would like to deliver our flagship product with Oracle Database and Application Server (10g) embedded.
According to an Oracle press release back in october 2003, Embedded License Resource Kits for Oracle Database and Oracle Application Server are available through the Oracle Partner Network (http://www.oracle.com/corporate/press/2484668.html)
I found a kit for Oracle Database through OPN but was not able to find one for Oracle Application Server 10g.
Does such a kit still exist for Oracle Application Server, and if yes where can I download it?

Go to MyOracleSupport/Metalink.
Click patches and Updates on the top left bar. Download the patches.
Each patch comes with its readme.txt. Do read it. It shows you how to install the patch. it also gives syntax with example for various scenarios of how to install it, or remove a patch either. In most of the patches, Installing a patch again does not hurt your system.
It's a good practice to keep db inventory clean before attempting to install the patch because otherwise the patch installation will fail.
hope that helps!
AMN

SUN CLUSTER RESOURCE FOR LEGATO CLIENT (LGTO.CLNT) in Oracle database

hi everyone
I am tryinig to create a LGTO.clnt resource in oracle-rg resource group in SUN CLUSTER 3.2 with the following commands
clresource create -g resource_group_name -t LGTO.clnt \
-x clientname=virtual_hostname -x owned_paths=pathname_1,
pathname_2[,...] resource_name
I just need to know what is value of Owned_Paths variable in the above commnad?
or what PATH it is reffering to ( $ORACLE_HOME or Global devices path ...etc) ?

Hello,
The Owned_Paths parameter are the paths (or mountpoints) the legato client will be able to backup from.
To configure a legato client in the Networker console (and to be managed as a cluster client) you need to declare the in the Owned_Paths the paths you want to save.
The savesets paths can be a directory under the Owned_Paths.
Regards
Pablo Villanueva.

Need help for learning how to develop interfaces for Oracle R12 EBS

Hi all,
I need to learn how to create interfaces in PL/SQL for Oracle R12 EBS Financials. I cannot find a good starting point for the documentation and examples to help me get started in this area. Would appreciate tips
for this area.

Hi,
What kind of interfaces you are planning to develop?
Oracle already provides list of APIs that can be used (in R12, it is responsibility).
Oracle Integration Repository Documentation Resources Release 12 [ID 396116.1]
Oracle Integration Repository
http://irep.oracle.com/index.html
If those APIs do not satisfy your requirements, you can refer to "Oracle Applications Developer" guide as well as SQL-PL/SQL guides.
Applications Releases 11i and 12
http://www.oracle.com/technetwork/documentation/applications-167706.html
Database Documentation -- SQL-PL/SQL
http://www.oracle.com/technetwork/database/enterprise-edition/documentation/index.html
Thanks,
Hussein

How can I use custom WLST commands for Oracle SOA Suite in Weblogic

Hi There,
I'm trying to view and search the weblogic log files using WLST on a Solaris/Unix system.
I have come across this "custom WLST commands for Oracle SOA Suite" and thought of using the custom logging commands to get my task done.
However, my WLST shell is not recognizing the commands and giving me the NameError!
wls:/devDomain1/domainRuntime> listLogs()
Traceback (innermost last):
File "<console>", line 1, in ?
NameError: listLogs
I tried the commands listLogs, displayLogs, getLogLevel & setLogLevel but in vain!
I have followed the instructions as per the oracle recommendation of using Custom WLST commands (http://docs.oracle.com/cd/E29597_01/core.1111/e10105/getstart.htm#ASADM10692) as below
- Launched the WLST shell from Oracle Home.
cd ORACLE_HOME/common/bin
./wlst.sh
- Tried to run the listLogs command from domainRuntime()
I would like to know if I need to import any additional libraries to run the custom WLST commands for Oracle SOA Suite in my WLST shell?
I have only weblogic 10.3.1 server installed on my Solaris 10 machine on which I have deployed the OSB application software.
There is no SOA Suite installed.
Or is there any other way I can browse the Server Log file and get the list of log messages? Basically I would like to use this feature in my script to customize it according to my requirement of listing specific error logs which I can work it out if I know how to make these commands work.
Please advise if this is possible and how?
Cheers.
Satish

I have tried on my OSB installation (no SOA Suite here), the command listLogs() works (I was in online mode, after a connect), and the classpath is:
CLASSPATH=/opt/oracle/fmw11_1_1_5/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/opt/oracle/fw11_1_1_5/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/java-1.6.0-sun-1.6.0.33.x6_64/lib/tools.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/server/lib/weblogic_sp.jar:/opt/oracle/fmw11_1_1_5/wlserver_10./server/lib/weblogic.jar:/opt/oracle/fmw11_1_1_5/modules/features/weblogic.server.modules_10.3.5.0.jar:/opt/oracle/fmw111_1_5/wlserver_10.3/server/lib/webservices.jar:/opt/oracle/fmw11_1_1_5/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/optoracle/fmw11_1_1_5/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/opt/oracle/fmw11_1_1_5/oracle_common/moules/oracle.jrf_11.1.1/jrf-wlstman.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lib/adfscripting.jar:/opt/oracl/fmw11_1_1_5/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/lb/mdswlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/auditwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_cmmon/common/wlst/resources/igfwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jps-wlst.jar:/optoracle/fmw11_1_1_5/oracle_common/common/wlst/resources/jrf-wlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/reources/oamap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/opt/oracle/fmw111_1_5/oracle_common/common/wlst/resources/ossoiap_help.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/osoiap.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/opt/oracle/fmw11_1_1_5/oracle_comon/common/wlst/resources/sslconfigwlst.jar:/opt/oracle/fmw11_1_1_5/oracle_common/common/wlst/resources/wsm-wlst.jar:/optoracle/fmw11_1_1_5/utils/config/10.3/config-launch.jar::/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbynet.ar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/derby/lib/derbyclient.jar:/opt/oracle/fmw11_1_1_5/wlserver_10.3/common/drby/lib/derbytools.jar::
The wlst.sh I have used is /opt/oracle/fmw11_1_1_5/osb/common/bin/wlst.sh
I hope this can help

OIM 9.1.0.2 - Weblogic JDBC Multi Data Sources for Oracle RAC

Does OIM OIM 9.1.0.2 BP07 support Weblogic JDBC Multi Data Sources (Services>JDBC>Multi Data Sources) for Oracle RAC instead of inserting the "Oracle RAC JDBC URL" on JDBC Data Sources for xlDS and xlXADS (Services>JDBC>Data Sources> xlDS|xlXADS > Connection Poll> URL) ?
If yes, is there are any other modifications that need to be made on OIM, or just changing the data sources?

Yes, it's supported. You install against one instance directly of the Rac Server. Then you update the config.xml file and the jdbc resource in your weblogic server with the full rac address. It is documented for installation against RAC. http://docs.oracle.com/cd/E14049_01/doc.9101/e14047/database.htm#insertedID2
-Kevin

Encountered ora-29701 during Sun Cluster for Oracle RAC 9.2.0.7 startup (UR

Hi all,
Need some help from all out there
In our Sun Cluster 3.1 Data Service for Oracle RAC 9.2.0.7 (Solaris 9) configuration, my team had encountered
ora-29701 *Unable to connect to Cluster Manager*
during the startup of the Oracle RAC database instances on the Oracle RAC Server resources.
We tried the attached workaround by Oracle. This workaround works well for the 1^st time but it doesnt work anymore when the server is rebooted.
Kindly help me to check whether anyone encounter the same problem as the above and able to resolve. Thanks.
Bug No. 4262155
Filed 25-MAR-2005 Updated 11-APR-2005
Product Oracle Server - Enterprise Edition Product Version 9.2.0.6.0
Platform Linux x86
Platform Version 2.4.21-9.0.1
Database Version 9.2.0.6.0
Affects Platforms Port-Specific
Severity Severe Loss of Service
Status Not a Bug. To Filer
Base Bug N/A
Fixed in Product Version No Data
Problem statement:
ORA-29701 DURING DATABASE CREATION AFTER APPLYING 9.2.0.6 PATCHSET
*** 03/25/05 07:32 am ***
TAR:
PROBLEM:
Customer applied 9.2.0.6 patchset over 9.2.0.4 patchset.
While creating the database, customer receives following error:
ORA-29701: unable to connect to Cluster Manager
However, if customer goes from 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the problem does not occur.
DIAGNOSTIC ANALYSIS:
It seems that the problem is with libskgxn9.so shared library.
For 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the install log shows the following:
installActions2005-03-22_03-44-42PM.log:,
[libskgxn9.so->%ORACLE_HOME%/lib/libskgxn9.so 7933 plats=1=>[46]langs=1=> en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in, it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW, tr,uk,vi]]
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]]
For 9.2.0.4 -> 9.2.0.6, install log shows:
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]] does not exist.
This means that while patching from 9.2.0.4 -> 9.2.0.5, Installer copies the libcmdll.so library into libskgxn9.so, while patching from 9.2.0.4 -> 9.2.0.6 does not.
ORACM is located in /app/oracle/ORACM which is different than ORACLE_HOME in customer's environment.
WORKAROUND:
Customer is using the following workaround:
cd $ORACLE_HOME/rdbms/lib make -f ins_rdbms.mk rac_on ioracle ipc_udp
RELATED BUGS:
Bug 4169291

Check if following MOS note helps.
Series of ORA-7445 Errors After Applying 9.2.0.7.0 Patchset to 9.2.0.6.0 Database (Doc ID 373375.1)

During the installation of grid infra(cluster) for Oracle 11.2 RAC one.

Good Day All, and thanks in advance…
During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
I ran the Cluster Verify Check – all passed.
Many Thanks
Ezekiel Filane
/u01/app/11.2.0/grid#./root.sh
Running Oracle 11g root.sh script...
The following environment variables are set as:
ORACLE_OWNER= grid
ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [usr/local/bin]:
The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root.sh script.
Now product-specific root actions will be performed.
2010-10-19 10:33:11: Parsing the host name
2010-10-19 10:33:11: Checking for super user privileges
2010-10-19 10:33:11: User has super user privileges
Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
Creating trace directory
User grid has the required capabilities to run CSSD in realtime mode
LOCAL ADD MODE
Creating OCR keys for user 'root', privgrp 'system'..
Operation successful.
root wallet
root wallet cert
root cert export
peer wallet
profile reader wallet
pa wallet
peer wallet keys
pa wallet keys
peer cert request
pa cert request
peer cert
pa cert
peer root cert TP
profile reader root cert TP
pa root cert TP
peer pa cert TP
pa peer cert TP
profile reader pa cert TP
profile reader peer cert TP
peer user cert
pa user cert
Adding daemon to inittab
CRS-4123: Oracle High Availability Services has been started.
ohasd is starting
CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
Start action for daemon aborted
CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
CRS-4000: Command Start failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
Start of resource "ora.ctssd -init" failed
Clusterware exclusive mode start of resource ora.ctssd failed
CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
Stop of resource "ora.crsd -init" failed
Failed to stop CRSD
CRS-2500: Cannot stop resource 'ora.asm' as it is not running
CRS-4000: Command Stop failed, or completed with errors.
Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
Stop of resource "ora.asm -init" failed
Failed to stop ASM
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.435: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.435: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.435: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.435: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
2010-10-19 10:33:14.461: [ OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.461: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.462: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.462: [ OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
2010-10-19 10:33:14.462: [ OCRRAW][1]proprinit: Could not open raw device
2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
2010-10-19 10:33:14.462: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.463: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.463: [ OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.483: [ OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.483: [ OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
2010-10-19 10:33:14.483: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
2010-10-19 10:33:14.484: [ OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
2010-10-19 10:33:14.484: [ OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2010-10-19 10:33:14.541: [ OCRAPI][1]a_init:6a: Backend init successful
2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...

Hi,
We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
An active cluster was found during exclusive startup, restarting to join the cluster
Failed to start Oracle Clusterware stack
Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
[root@P01DOU417] /u01/app/11.2.0/grid #
LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
2010-11-13 17:22:14: Starting CSS in clustered mode
2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
2010-11-13 17:32:28: Command output:
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
CRS-5804: Communication error with agent process
CRS-4000: Command Start failed, or completed with errors.
End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:28: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:28: Checking the status of css
2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
2010-11-13 17:32:33: Command output:
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
End Command output2010-11-13 17:32:33: Checking the status of css
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
2010-11-13 17:32:38: CRS-5804: Communication error with agent process
2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
2010-11-13 17:32:38: Package File Line Calling
2010-11-13 17:32:38: --------------- -------------------- ---- ----------
2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
2010-11-13 17:32:38: ####### End DIE Stack Trace #######
2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
Any help on this is appreciated.
Edited by: user12019257 on Nov 17, 2010 1:26 PM

DATABASE RESOURCE MANAGER ( ORACLE 8I NEW FEATURE )

제품 : ORACLE SERVER
작성날짜 : 2004-08-16
DATABASE RESOURCE MANAGER ( ORACLE 8I NEW FEATURE )
===================================================
SCOPE
8i~10g Standard Edition 에서는 Database Resource Manager 를 지원하지 않는다.
Explanation
Database Resource Manager란 OS에서 제공하는 자원 (예 : CPU 자원 )에 대해 DB
차원에서 계획을 세워, 세부 관리를 할 수 있도록 해 주는 서비스이다.
예를 들어 주간에 batch 작업을 처리하더라도, OLTP 업무에는 지장을 주지 않아야
할 경우 batch 작업에 CPU 자원을 적게 할당해 주는 것이 바람직 하며, Resource
Manager를 활용하여 CPU 자원을 batch 작업과 OLTP 업무에 서로 다르게 할당해 줄
수 있다. ( Oracle 8.1.6 까지는 Resouurce Manager에서 CPU 자원에 대해서만
관리만 가능하다 )
1. 용어
1) Resource Consumer Group
사용자 session들의 집합. Resource에 대한 요구사항에 따라 나뉘어진 그룹.
2) Resource Plan
     Consumer Group에 자원을 할당 해 주기 위한 resource plan directive들을
포함.
3) Resource Allocation Method
     Resource Manager에서 자원을 할당해 주는 방법/정책.
4) Resource Plan Directive
     Resource Plan에 대해 자원을 할당해 주는 세부 내역.
2. Resource Consumer Group
* 기본 group
     [ 사용자가 삭제, 수정할 수 없는 group ]
     OTHER_GROUPS : active plan schema에 속하지 않는 consumer group의 모든
session
     DEFAULT_CONSUMER_GROUP : consumer group을 지정하지 않은 모든
session.(default)
     [ 기본적으로 제공되나 사용자가 삭제하거나 변경할 수 있는 group ]
     SYS_GROUP : SYSTEM_PLAN에 대한 high priority consumer group
SYSTEM, SYS user에 할당한다.
     LOW_GROUP : SYSTEM_PLAN에 대한 low priority consumer group
3. Resource Plan
     Consumer group에 속하는 session들은 해당 group에 대한 resource plan에
따라 자원 할당이 결정되며, 자원 할당에 대한 세부 사항은 resource plan에
대한 resource plan directive에서 지정된다.
     Resource plan은 subplan을 둘 수 있다.
4. Resource Allocation Method
     Round-robin Method : Consumer group 내에서 session들에 대한 CPU 할당
     Emphasis Method : Consumer group에 할당되는 CPU
     Absolute Method : Parallel degree 한계 ( 예 : Parallel Query에서의
degree )
5. Resource Plan Directive
     Resource Plan Directive에 지정된 내용들은 resource plan에 따라
consumer group에 자원을 할당할 때 반영된다.
6. 구현 예제
     MYDB PLAN +-> MAILDB PLAN +-> POSTMAN GROUP (40% Level 1)
     | (30% Level 1) |
     | +-> USERS GROUP (80% Level 2)
     | |
     | +-> MAILMAINT GROUP (20% Level 2)
     | |
     | +-> OTHER GROUP (100% Level 3)
     |
     +-> BUGDB PLAN +-> ONLINE GROUP (80% Level 1)
     (70% Level 1) |
     +-> BATCH GROUP (20% Level 1)
     |
     +-> BUGMAINT GROUP (100% Level 2)
     |
     +-> OTHER GROUP (100% Level 3)
     위 예에서 MYDB PLAN에는 2개의 subplan ( MAILDB PLAN, BUGDB PLAN )이
     있으며 각각 30%와 70%의 CPU 자원을 할당하였다.
     Level 1, Level 2, Level 3 는 우선순위 레벨을 의미하며, 하나의
     resource plan에서 동일한 level의 합이 100%를 넘지 못한다.
     ( Level 은 1부터 8까지 지정할 수 있으며 level 1이 가장 우선순위가
     높으며 level 8이 가장 우선순위가 낮다 )
     예를 들어 전체 CPU 자원의 70%를 할당 받은 BUGDB PLAN은 다시
     ONLINE GROUP과 BATCH GROUP을 두고 있는데, 이 둘의 Level이 모두 1이며
     두개의 percentage의 합이 100%이다. 하지만, 즉, level 1인 ONLINE GROUP
에 90%를 할당하였다면, level 1인 BATCH GROUP에는 10% 이상을 할당할 수
없다.
Example
     * 구현을 위한 코드
     BEGIN
     /* PLAN schema 작업 영역 생성 */
     DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
     /* BUGDB PLAN, MAILDB PLAN, MYDB PLAN 생성 */
     DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'bugdb_plan',
     COMMENT => 'Resource plan/method for bug users sessions');
     DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'maildb_plan',
     COMMENT => 'Resource plan/method for mail users sessions');
     DBMS_RESOURCE_MANAGER.CREATE_PLAN(PLAN => 'mydb_plan',
     COMMENT => 'Resource plan/method for bug and mail users sessions');
     /* CONSUMER GROUP 생성 */
     DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Bug_Online_group', COMMENT => 'Resource consumer group/method for
online bug users sessions');
     DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Bug_Batch_group', COMMENT => 'Resource consumer group/method for
bug users sessions who run batch jobs');
     DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Bug_Maintenance_group', COMMENT => 'Resource consumer group/method
for users sessions who maintain the bug db');
     DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Mail_users_group', COMMENT => 'Resource consumer group/method for
mail users sessions');
     DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Mail_Postman_group', COMMENT => 'Resource consumer group/method for
mail postman');
     DBMS_RESOURCE_MANAGER.CREATE_CONSUMER_GROUP(CONSUMER_GROUP =>
'Mail_Maintenance_group', COMMENT => 'Resource consumer group/method
for users sessions who maintain the mail db');
     /* BUGDB PLAN에 대한 DIRECTIVE 생성 */
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'Bug_Online_group',     COMMENT => 'online bug users
sessions at level 1', CPU_P1 => 80, CPU_P2=> 0,
     PARALLEL_DEGREE_LIMIT_P1 => 8);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'Bug_Batch_group',      COMMENT => 'batch bug users
sessions at level 1', CPU_P1 => 20, CPU_P2 => 0,
     PARALLEL_DEGREE_LIMIT_P1 => 2);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'Bug_Maintenance_group',COMMENT => 'bug
maintenance users sessions at level 2', CPU_P1 => 0, CPU_P2 => 100,
     PARALLEL_DEGREE_LIMIT_P1 => 3);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'bugdb_plan',
GROUP_OR_SUBPLAN => 'OTHER_GROUPS', COMMENT => 'all other users
sessions at level 3', CPU_P1 => 0, CPU_P2 => 0, CPU_P3 =>
     100);
(참고) CPU_P1 : cpu allocation for level 1
     /* MAILDB PLAN에 대한 DIRECTIVE 생성 */
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'Mail_Postman_group',COMMENT => 'mail postman at
level 1', CPU_P1 => 40, CPU_P2 => 0, PARALLEL_DEGREE_LIMIT_P1 => 4);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'Mail_users_group',     COMMENT => 'mail users
sessions at level 2', CPU_P1 => 0, CPU_P2 => 80,
     PARALLEL_DEGREE_LIMIT_P1 => 4);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'Mail_Maintenance_group',COMMENT => 'mail
maintenance users sessions at level 2', CPU_P1 => 0, CPU_P2 => 20,
     PARALLEL_DEGREE_LIMIT_P1 => 2);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'maildb_plan',
GROUP_OR_SUBPLAN => 'OTHER_GROUPS', COMMENT => 'all other users
sessions at level 3', CPU_P1 => 0, CPU_P2 => 0, CPU_P3 =>
     100);
     /* MYDB PLAN에 대한 DIRECTIVE 생성 */
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'mydb_plan',
GROUP_OR_SUBPLAN => 'maildb_plan', COMMENT=> 'all mail users
sessions at level 1', CPU_P1 => 30);
     DBMS_RESOURCE_MANAGER.CREATE_PLAN_DIRECTIVE(PLAN => 'mydb_plan',
GROUP_OR_SUBPLAN => 'bugdb_plan', COMMENT => 'all bug users sessions
at level 1', CPU_P1 => 70);
     /* PLAN schema 작업 내용을 저장 */
     DBMS_RESOURCE_MANAGER.VALIDATE_PENDING_AREA();
     DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA();
     end;
7. CONSUMER GROUP에 사용자나 세션을 할당하는 방법
     먼저 인스턴스에서 사용할 TOP Level resource plan 을 지정한다.
initSID.ora에 RESOURCE_MANAGER_PLAN = MRDB_PLAN 지정이나 아래와 같이
session level에 ALTER SYSTEM command를 사용하여 지정한다.
     ALTER SYSTEM SET RESOURCE_MANAGER_PLAN = MYDB_PLAN;
     그리고 SCOTT 계정에 BUG_ONLINE_GROUP과 BUB_BATCH_GROUP 에 속할 수 있는
권한을 부여
DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP ('SCOTT',
'BUG_ONLINE_GROUP', TRUE);
     DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP ('SCOTT',
'BUG_BATCH_GROUP', TRUE);
     * DBMS_RESOURCE_MANAGER.SET_INITIAL_CONSUMER_GROUP( user in
varchar2, consumer_group in varchar2);
     예)
     DBMS_RESOURCE_MANAGER.SET_INITIAL_CONSUMER_GROUP('SCOTT',
'BUG_ONLINE_GROUP');
     SCOTT 계정을 BUG_BATCH_GROUP에 할당
     * DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_SESS (
                         session_id IN NUMBER,
                         session_serial IN NUMBER,
                         consumer_group IN VARCHAR2);
     예)
     DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_SESS( 11, 2,
'BUG_ONLINE_GROUP');
     * DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER (
                         user IN VARCHAR2,
                         consumer_group IN VARCHAR2);
     예)
     DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER('SCOTT',
'BUG_BATCH_GROUP');
8. 관련된 Dictionary
DBA_RSRC_PLANS : Resource plan과 status
DBA_RSRC_PLAN_DIRECTIVES : Resource plan directives와 status
DBA_RSRC_CONSUMER_GROUPS : Consumer group과 status
DBA_RSRC_CONSUMER_GROUP_PRIVS : 사용자에게 부여된 Consumer group
DBA_USERS : INITIAL_RSRC_CONSUMER_GROUP라는 새로운 column이 추가
V$SESSION : RESOURCE_CONSUMER_GROUP라는 새로운 column이 추가
V$RSRC_PLAN : 새로운 view로 active resource plan을 보여준다
V$RSRC_CONSUMER_GROUP : 새로운 view로 consumer group의 active session
을 보여준다.
Reference Ducumment
---------------------

user1 is the schema present in DB1
user2 is the schema present in DB2. I just have a DB link
as below:
create database link link_to_DB2 connect to user2 identified by user2 using 'DB2';---Connects from user1 of DB1 to user2 of DB2.
Requirement is as below:
CPU for DB2 - 25%
Out of above 25%, CPU for user2 - 70%
CPU for user1 30% -- whenever it conncts using the link)
Please help me out.

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)

How to set JDBC Data Sources in Oracle MapViewer for Oracle database 12c Release 1 (12.1.0.1)?
The following is my configuration in the conf\mapViewerConfig.xml:
<map_data_source name="mvdemo12"
jdbc_host="127.0.0.1"
jdbc_sid="orcl12c1"
jdbc_port="1522"
jdbc_user="mvdemo"
jdbc_password="7OVl2rJ+hOYxG5T3vKJQb+hW4NPgy9EN"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
editable="true"/>

But it does not work.
After use "sqlplus mvdemo/[email protected]:1522/pdborcl", it connected to the Oracle database 12c.
Does anyone know it?
Thanks,

For 11.1.1.7.1 use the syntax for jdbc_sid, i.e.
//mypdb1.foo.com as described in the README,
- MapViewer native (non-container) data sources can now use database service name in place of SID. To supply a db service name, you will use the same jdbc_sid attribute, but specify the service name with double slashes in front, such as follows:
<map_data_source name="myds"
    jdbc_host="foo.com"
    jdbc_sid="//mypdb1.foo.com"
    jdbc_port="1522"
/>
For 11.1.1.7.0 use a container_ds instead.
i.e. instead of using
<map_data_source name="my_12c_test"
                   jdbc_host="mydbinstance"
                   jdbc_sid="pdborcl12c"
                   jdbc_port="1522"
                   jdbc_user="mytestuser"
                   jdbc_password="m2E7T48U3LfRjKwR0YFETQcjNb4gCMLG8/X0KWjO00Q="
                   jdbc_mode="thin"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
use
<map_data_source name="my_12c_test"
                   container_ds="jdbc/db12c"
                   number_of_mappers="6"
                   allow_jdbc_theme_based_foi="false"
                   editable="false"
   />
In my case the Glassfish 3.1.2.2 JDBC connection pool definition was
Property
url jdbc:oracle:thin:@mydbinstance:1522/pdborcl12c.rest_of.service.name
Uncheck the Wrap JDBC Objects option in Advanced panel, i.e. the Edit JDBC Connection Pool Advanced properties page.
Add a JDBC resource for that newly created pool
Use that in mapviewerconfig.xml as above

How to setup JNDI Name for Oracle Apps adapter?

Hello,
I am learning Oracle SOA 11g and trying to do some tutorial on Oracle Application Adapter. I know how to configure JNDI for DBadapter and I did that successfully. I followed same steps to create New JNDI for Oracle Apps Adapter.
1. I Created new data source using Path Services->Data Sources -> New Genric Data Source. Connection to database was successful and created new JNDI Name: jdbc/PKDTAPPS.
2. Then Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> New and created JNDI Name eis/Apps/PKDTAPPS.
However I did not find newly created JNDI Name in step 2 under Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> javax.resource.cci.ConnectionFactory.
Please let me know if am I following correct steps to create new Oracle Apps Adapter JNDI Name or not.
Since above approch did not work I created new JNDI for DBAdapter with same database connection details. And then latter on use that JNDI Name while creating Oracle Application Adapter in JDeveloper composite. And it allowed me to access Oracel Apps open interface. However while deploying the application it gave me following error.
<Feb 16, 2015 10:50:59 AM CST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21537> <Sending back error message: There was an error deploying the composite on AdminServer: [JCABinding]
[adapter-Apps-101-JournalImport.InsertJournal/1.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.apps.AppsTableWriteInteractionSpec: Cannot locate Java class
oracle.tip.adapter.apps.AppsTableWriteInteractionSpec..>
Since I have no past experience kindly suggest me what is right way to do this.
Thanks,
Shri

Hi shri,
Can you check the targets of oracle apps adapter that is it deployed on both cluster and admin server both.
Deployment-> OracleApps Adapter-> Targets
Regards,
Anshul

Mininum resources for Oracle VM

Similar Messages

Maybe you are looking for