MiniSAP 6.20: ALV tree not working in background

Good day!
SAP provides a sample ALV tree program, BCALV_TREE_DEMO, which could be submitted in the background.
However, it does not work in MiniSAP 6.20. It's kind of bizarre as it works in our Test system.
Does anyone has any idea what's happening.

Good day!
The ALV tree report is submitted in the background.
By right, it should produce an ALV tree report in the print spool.
However, it does not seem to work. I checked the program and found there is a logic to check whether it's a background job or not. If it is, it would not create the container.
It's bizarre that it does not work in MiniSAP 6.20 but it works in 6.10

Similar Messages

Output of a "report_attribute_error_message" in a sorted ALV does not work!

Hi all/SAP,
in my thread editable ALV - how to throw an error message for a specific line & field I figured out, that the output of a "report_attribute_error_message" in the ON_DATA_CHECK event of an editable ALV does not work, if sorting is active for a column.
Thanks to The specified item was not found. for reproducing this problem.
A similar problem exists, using an aggregation of a column. This will lead to a runtime exception.
I've found no fix in the OSS to this problem.
So is there a way to use sorting together with the output of a "report_attribute_error_message"
or if this is a bug, can/will this be fixed in the (near) future?
Thanks,
Andreas

Hi,
Yes, it doesnot work with those (RB,CB) UI elements...Have you checked for any note..I have also tried but no luck..
Regards,
Lekha.

Open dataset is not working in background in PRD

Dear All,
Open dataset is not working in background in PRD .
OPEN DATASET filepath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
Whike running in foregroundits working dev as well as prd.
but when i am running in background its giving error like file not found .
but al11 is working (i mean my file path is working ).
Thanks N Regards,
Srinivasa Reddy

your authority team shall check the batch user of that abap!
Could you please tell us the detailed error message?
grx
Andreas

BADI implementation is not working in background for MRRL

Hai frnds,
BADI: MRM_WT_SPLIT_UPDATE is used for deducting withholding tax in MRRL(Invoice verification). This BADI was implemented and working fine in foreground, but not working in background.
After implementing the BADI, the standard method of calculating TDS(from vendor master) is over written by BADI implementation.Now standard deduction is also not workijng in background.Plz help me to solve it.
Bala.V

HI,
COR6N is the Enjoy Transaction and sap does not suggest to write the BDC on these transaction as most of these transaction uses the GUI elements foe better display and which cannot be recorded while processing the BDC in back ground.
Check for the Normal transaction and write the BDC for it.
Or
Pass X to Rcommit flag in the CTU_PARAMS option and check.

BDC is not working in background for Transaction COR6N

Hi ,
   We have written the BDC program for transaction COR6N. BDC works perfectly in foreground but it's not working for background option.
    SELECT SINGLE AUFPL INTO W_AUFPL FROM AFKO
              WHERE AUFNR = W_AUFNR.
    SELECT AUFPL VORNR INTO TABLE IT_PHASE FROM AFVC
            WHERE AUFPL = W_AUFPL
              AND PHFLG = 'X'.
    LOOP AT IT_PHASE.
    WA_BDCDATA-PROGRAM = 'SAPLCORU_S'.
    WA_BDCDATA-DYNPRO   = '0100'.
    WA_BDCDATA-DYNBEGIN = 'X'.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'AFRUD-AUFNR'.
    WA_BDCDATA-FVAL     = W_AUFNR.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'AFRUD-VORNR'.
    WA_BDCDATA-FVAL     = IT_PHASE-VORNR.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'BDC_OKCODE'.
    WA_BDCDATA-FVAL     = '/00'.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-PROGRAM = 'SAPLCORU_S'.
    WA_BDCDATA-DYNPRO   = '0100'.
    WA_BDCDATA-DYNBEGIN = 'X'.
    APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'AFRUD-LMNGA'.
    WA_BDCDATA-FVAL     = w_qty. "'60'.
    APPEND WA_BDCDATA TO BDCDATA.
   CLEAR WA_BDCDATA.
   WA_BDCDATA-FNAM     = 'AFRUD-BUDAT'.
   WA_BDCDATA-FVAL     = w_date. "'31.12.2008'.
   APPEND WA_BDCDATA TO BDCDATA.
    CLEAR WA_BDCDATA.
    WA_BDCDATA-FNAM     = 'BDC_OKCODE'.
    WA_BDCDATA-FVAL     = '=BU'.
    APPEND WA_BDCDATA TO BDCDATA.
    clear X_OPTIONS.
    X_OPTIONS-DISMODE = 'N'. ' works perfectly for 'A'
    X_OPTIONS-UPDMODE = 'S'.
    X_OPTIONS-CATTMODE = ' '.
    X_OPTIONS-DEFSIZE = ' '.
    X_OPTIONS-RACOMMIT = ' '.
    X_OPTIONS-NOBINPT = 'X'.
    X_OPTIONS-NOBIEND = ' '.
    CALL TRANSACTION 'COR6N' USING BDCDATA OPTIONS FROM X_OPTIONS
                       MESSAGES INTO ITAB.
                 MODE 'N' MESSAGES INTO ITAB UPDATE 'S'.
   WAIT UP TO 3 SECONDS.
    COMMIT WORK AND WAIT.
    CLEAR:BDCDATA[],WA_BDCDATA.

HI,
COR6N is the Enjoy Transaction and sap does not suggest to write the BDC on these transaction as most of these transaction uses the GUI elements foe better display and which cannot be recorded while processing the BDC in back ground.
Check for the Normal transaction and write the BDC for it.
Or
Pass X to Rcommit flag in the CTU_PARAMS option and check.

In c200 chat is not working on background like 273...

In 2730 c i will get sound alart when i get a im i will be 24hours online Chat is not working in background in c200 like 2730 c so i cant use im all time how to make it work like 2730 c in my c200 both are s40 no

Dude, make sure u are on a 3G network to ensure clarity, then also, install skype so that you can get some of those neccessary files/apps to carry out voice stuffs...

Submit and return exporting list to memory is not working in background

Hi gurus,
i am using submit statement and exporting list to memory. it works fine in foreground and i am able to get the output. but in case of background , it is not exporting the list.PLease help me on this.
Thanks and regards,
Rajeshwar

Hello Rajeshwar,
This is a duplicate thread. You have a thread with the same question.
[list_to_memory is not working in background;
Jayant Sahu

Gui_download Function module is not working in Background Scheduling

Hi Experts,
Function modules like GUI_DOWNLOAD are not working in background scheduled jobs, It is raising an exception. Though it is working fine in foreground execution.
Please provide me solution for this challenging task.
you could be rated well for this question.
Thanks,
Rama Krishna.

Hello,
work with open dataset and close dataset...
just loop over itab and transfer itab field for field into a string field separated by ;
Here is an extract of coding:
OPEN DATASET p_dath FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
LOOP AT itab_pos.
    CLEAR satz.
    MOVE itab_pos-vbeln TO satz-vbeln.
    MOVE ';' TO satz-fill1.
    MOVE itab_pos-kunnr TO satz-kunnr.
    MOVE ';' TO satz-fill2.
    MOVE itab_pos-ktgrd TO satz-ktgrd.
    MOVE ';' TO satz-fill3.
    MOVE itab_pos-fkdat TO satz-fkdat.
    MOVE ';' TO satz-fill4.
    MOVE itab_pos-budat TO satz-budat.
    MOVE ';' TO satz-fill5.
    MOVE itab_pos-cpudt TO satz-cpudt.
    MOVE ';' TO satz-fill6.
    MOVE itab_pos-fkimg TO satz-fkimg.
    MOVE ';' TO satz-fill7.
    MOVE itab_pos-netwr TO satz-netwr.
    MOVE ';' TO satz-fill8.
    MOVE itab_pos-vrkme TO satz-vrkme.
    MOVE ';' TO satz-fill9.
    MOVE itab_pos-ktgrm TO satz-ktgrm.
    MOVE ';' TO satz-fill10.
    MOVE itab_pos-matnr TO satz-matnr.
    MOVE ';' TO satz-fill11.
    MOVE itab_pos-mattxt TO satz-mattxt.
    MOVE ';' TO satz-fill12.
    MOVE itab_pos-gewei TO satz-gewei.
    MOVE ';' TO satz-fill13.
    MOVE itab_pos-brgew TO satz-brgew.
    TRANSFER satz TO p_dath.
ENDLOOP.
CLOSE DATASET p_dath.
It is not so comfortable as it is with GUI_DOWNLOAD but it works in background!

SUBMIT does not work in background...

Hi guys,
We have a copy program of a standard transaction and once we use this copy program in the main program via SUBMIT... it does not work in background...
Why is this so,,, Please advice...
THanks!

Hi,
When executing some program using the statement like SUBMIT prog_2 WITH parameters and RETURN.
In foreground PROG_2 is executed, and once you click on the BACK button the code written after this SUBMIT statement will be executed.
If you are executing the same in the BACKGROUND mode, no feasibility of clicking on BACK button, hence control will remain in the PROG_2 only after executing its logic.
Please code accordingly.

GUI_DOWNLOAD does not work for background printing

Hi,
Need some help urgently.
Function moduel GUI_DOWNLOAD does not work for background printing. I want to know how this issue can be handled or we have to use some other function module.
We are using this in a report and i get the error dump OBJECTS_OBJREF_NOT_ASSIGNED when we run this report in background.
Kindly suggest.
Best Regards,
Abbasi

you can not use gui_download in background.
Try searching first, this thing has been posted a thousand times already

Program not working ib background

Moderator message: background/foreground/GUI problems = FAQ, please search before posting.
Hi All,
I have a program which is not working in background.It actuly takes the file and using GUI_upload i upload it into ITAb and then modify the database table based on this. But when i process this in foreground it working and updating the table.But when i scedule in background the job is getting over in 1-2 sec and not updating the table.
Please help me. below is the code for your refrence:
data:begin of i_tab occurs 0,
      Bp1 like DATAbase table,
      Bp2 like database table,
     trf1 type string,
     trf2 type string,
     status type string,
end of i_tab.
data: BP_ver type STANDARD TABLE OF DATAbase table      with header line ,
      w_ver type ZVERS_BUT050_CUR .
DATA: it_tab type filetable,
    gd_subrc TYPE i,
    file_name TYPE string,
    path TYPE string.
DATA : lw_file TYPE file_table.
DATA: LIN TYPE I.
*Input File
SELECTION-SCREEN begin of block blk with frame title text-100.
SELECTION-SCREEN SKIP 2.
parameters : p_file like rlgrap-filename .
SELECTION-SCREEN end of block blk.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CLEAR: file_name.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
    EXPORTING
      window_title     = 'Select only Text File'
      default_filename = '*.txt'
      multiselection   = ' '
    CHANGING
      file_table       = it_tab
      rc               = gd_subrc.
READ TABLE it_tab INTO lw_file INDEX 1.
file_name = lw_file.
p_file = file_name.
START-OF-SELECTION.
*Upload the file
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = FILE_NAME
     FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
    TABLES
      DATA_TAB                    = i_tab
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at i_tab.
    if i_tab-status = 'Yes'.
      i_tab-status = 'V'.
    else.
      i_tab-status = 'I'.
    endif.
    modify i_tab.
endloop.
if i_tab is not INITIAL.
    select * from DATAbase table into CORRESPONDING FIELDS OF TABLE BP_ver FOR ALL ENTRIES IN i_tab
      where PARTNER1 = i_tab-Bp1 and PARTNER2 = i_tab-bp2 .
endif.
*Update the table
loop at BP_ver .
    clear i_tab.
    read TABLE i_tab with key bp1 = BP_ver-PARTNER1 bp2 = BP_ver-PARTNER2 .
   if i_tab-bp1 = w_ver-PARTNER1 and i_tab-bp2 = w_ver-PARTNER2.
    BP_ver-PARTNER1 = i_tab-bp1 .
    BP_ver-PARTNER2 = i_tab-bp2 .
    BP_ver-Z_CURRENTLY_VALI = i_tab-status .
    modify BP_ver TRANSPORTING Z_CURRENTLY_VALI .
   endif.
endloop.
update DATAbase table from table bp_ver[] .
if sy-SUBRC eq 0.
    commit work.
    message 'Table DATAbase table Updated Sucsussfully' type 'S'.
else.
    message 'Table Not Updated !!! Check the file data or input' type 'S'.
endif.
Edited by: Thomas Zloch on Nov 12, 2010 11:03 AM

Hi,
     Look at the coding in FM GUI_UPLOAD ... This does not work in background ....
Batch mode is not supported
IF sy-batch = 'X'.
    MESSAGE ID 'FES' TYPE 'E' NUMBER '002' RAISING NO_BATCH.
ENDIF.
Regards,
Srini.

Workflow not working in Background Processing

Hi All,
I am relatively new to Workflow. Currently, I am creating Deliveries (preferably in background) once a Sales Order is created. I am using an ABAP Class as the object method to submit the sales order number to the delivery processing method (which just submits basic information to standard SAP transaction VL04). I found that if the execution of the delivery creation task is not in Background Processing (the user manually kicks off the Delivery creation in SBWP) the workflow works as expected and creates the deliveries. However, if the Background Processing is checked, the workflow does not process and does not create a delivery. Is there any specific reason as to why the workflow will not work in background?
Any help you can give would be greatly appreciated. Thanks.
John

Hi,
John
See to process a Back ground task, there should be a proper parameter flow.
Please look at the import parameters in the method you are using to process the back ground task..
If proper import parameters are passed then the task will work
This should help..
Thanks,
Shanky

ALV Filter : Not working for a text field - Strange problem

Dear All,
I have a Z-program where the ALV filter is not working on a particular text field.
The output on that text field is as below :
ABCD
JKLM
YYZZ
ABCD
JKLM
ABCD
JKLM
YYZZ
YYZZ
When we try to filter on YYZZ, it gives blank list. But for other options given abobe it works fine.
I know it is because of the negative sign , but how can we over come this problem ?
Thanks in advance,
Sandip.

Hi Sandip,
Use 'LOWERCASE' in the fieldcatalog.
For the particular text field when you are appending the Fieldcatalog structure to the Fieldcatalog Table
( Suppose LS_FIELDCAT)
Then check the LOWERCASE field.
(LS_FIELDCAT-LOWERCASE = 'X' )
This will serve the purpose.
Regards,
Sourav

ALV tree not getting refreshed

Hi
I have 2 fields A and B in the main screen and a tabstrip with 4 tabs.
Each tab contains a ALV tree
Now when I open the main screen for the first time the ALV tree data is coming properly as per the default values of A and B.
But when I change the values of A or B the ALV tree does not get refreshed. The final table has the changed data but the ALV shows only the old data.
I am doing the ALV tree for the first time in module pool. Please provide some sample code to refresh the ALV tree.
Regards,

Hi
Alv tree is now getting refreshed.The subscreen refresh problem is solved
we have to use REFRESH_TABLE_DISPLAY method to do it.
if tree1 is initial
create object
create container
call method set_table_for_first display
else.
call method refresh_table_display.
endif.
Regards,
Mozila

Spanning-tree not working: SG500 to Cat3650

Hi All,
Trying to turn up a new site. I have 2 switches: Cat 3650 & SG500-52P. I want to connect up two ethernet cables between these switches in the event one fails, STP will put the blocked one in forwarding. However, when I connect up the 2nd ethernet cable, I get the following:
IPADTBL-N-IPDUPLICATE: Duplicate IP address 192.168.5.232 from MAC a0:ec:f9:ef:6a:18 was detected on VLAN 1, port gi1/1/24
This log message is then followed by the network locking up & crashing until I remove the 2nd cable (i.e. STP Loop). Removing the redundant cable solves the problem. This is because STP is allowing both links to transitioning to forwarding state (confirmed in show spanning-tree & show cdp neighbor).
Why is spanning-tree not correctly blocking one of the lines? Is that type of architecture not supported when there is an SG300/500 in the equation?
Configs below:
Core 3650: (box configs basically)
Switch#show run
Building configuration...
Current configuration : 2686 bytes
! Last configuration change at 10:01:53 UTC Thu Jan 22 2015
! NVRAM config last updated at 09:24:03 UTC Thu Jan 22 2015
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
hostname Switch
boot-start-marker
boot-end-marker
vrf definition Mgmt-vrf
address-family ipv4
exit-address-family
address-family ipv6
exit-address-family
logging console emergencies
enable secret 5 $1$Qi5N$u/5q1HESY/TyQsPFNKVah1
no aaa new-model
clock timezone UTC -6 0
clock summer-time UTC recurring
switch 1 provision ws-c3650-24ts
ip device tracking
diagnostic bootup level minimal
spanning-tree mode pvst
spanning-tree extend system-id
spanning-tree vlan 1 priority 24576
redundancy
mode sso
class-map match-any non-client-nrt-class
match non-client-nrt
policy-map port_child_policy
class non-client-nrt-class
bandwidth remaining ratio 10
interface GigabitEthernet0/0
vrf forwarding Mgmt-vrf
no ip address
negotiation auto
interface GigabitEthernet1/0/1
interface GigabitEthernet1/0/2
interface GigabitEthernet1/0/3
interface GigabitEthernet1/0/4
interface GigabitEthernet1/0/5
interface GigabitEthernet1/0/6
interface GigabitEthernet1/0/7
interface GigabitEthernet1/0/8
interface GigabitEthernet1/0/9
interface GigabitEthernet1/0/10
interface GigabitEthernet1/0/11
interface GigabitEthernet1/0/12
interface GigabitEthernet1/0/13
interface GigabitEthernet1/0/14
interface GigabitEthernet1/0/15
interface GigabitEthernet1/0/16
interface GigabitEthernet1/0/17
interface GigabitEthernet1/0/18
interface GigabitEthernet1/0/19
interface GigabitEthernet1/0/20
interface GigabitEthernet1/0/21
interface GigabitEthernet1/0/22
interface GigabitEthernet1/0/23
interface GigabitEthernet1/0/24
interface GigabitEthernet1/1/1
interface GigabitEthernet1/1/2
interface GigabitEthernet1/1/3
interface GigabitEthernet1/1/4
interface Vlan1
ip address 192.168.5.230 255.255.255.0
ip default-gateway 192.168.5.1
ip http server
ip http secure-server
line con 0
exec-timeout 0 0
stopbits 1
line aux 0
line vty 0 4
password scrubbed
login
line vty 5 15
password scrubbed
login
wsma agent exec
profile httplistener
profile httpslistener
wsma agent config
profile httplistener
profile httpslistener
wsma agent filesys
profile httplistener
profile httpslistener
wsma agent notify
profile httplistener
profile httpslistener
wsma profile listener httplistener
transport http
wsma profile listener httpslistener
transport https
ap group default-group
end
SG500 Switch:
switchff1182#show run
config-file-header
switchff1182
v1.3.0.62 / R750_NIK_1_3_647_260
CLI v1.0
set system mode switch queues-mode 4
file SSD indicator encrypted
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
hostname switchff1182
no passwords complexity enable
username cisco password encrypted scrubbed privilege 15
ip ssh server
snmp-server server
no ip http server
ip telnet server
interface vlan 1
ip address 192.168.5.231 255.255.255.0
no ip address dhcp
exit
ip default-gateway 192.168.5.1

Hi Peter,
Thanks for replying. Unfortunately (or fortunately if it worked), STP is running and BPDU's are flooding below:
SW500A#show spanning-tree
Spanning tree enabled mode RSTP
Default port cost method: long
Root ID Priority 24577
Address a0:ec:f9:ef:6a:00
Cost 20000
Port gi1/1/43
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32768
Address 2c:3e:cf:ff:11:82
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
SW500A#show spanning-tree bpdu
Global: Flooding
I guess I'm doing etherchannels instead of redundant links :-/
This is one of many reasons why I regret these small business models being made; A lot of things that are polished and functional in the enterprise grade (i.e. real switches) just don't seem to work on these units. But unfortunately, as the price is significantly cheaper, companies will continue purchasing these over the better quality units, and engineers like myself will be stuck working with the cut-corners version of a Cisco switch.

MiniSAP 6.20: ALV tree not working in background

Similar Messages

Maybe you are looking for