MiniSap And TP_DOMAIN_NSP.PFL
Dear all,
I have install miniSap in windows 2003.
When I use "SE10" to release transport request, the error occured :
Test call of transport control program (tp) ended with return code 0208
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK NSPK900003 pf=
sapserver\sapmnt\trans\bin\TP_DOMAIN_NSP.PFL -Dtransdir=\"
which checks the export requirements, returned the following information:
Return code from tp: 0208
Error text from tp: ERROR:
thanks you
Hallo,
as I installed the new Version of SAP NW2004S, had this same problem too. You must control the share properties of SAP Folder. After the installation, I saw that the SAP folder was not shared. Share the installation Folder of SAP as "sapmnt" and give the authorization for the users (Important , standard is only the read authorization, you must have the write authorization too). Then you can distribute and activate the configurations in transaction stms, menü System -> Overview ->Extras -> Distribute and activate Configurations. I hope that it helps.
Ali
Similar Messages
-
[b]MiniSap and the ABAP OBJECTS book [/b]
Hello,
I have purchased the book "ABAP Objects" by Keller and Kruger. I attempted to install Minisap and ran into a lot of problems. I suspect that I need the most recent version of this product that runs on Windows XP. Can anyone direct me to place where I may download Minisap without having to pay for it again! I really have to say that it shouldn't be this difficult to install a product that is used for training and education. So far I've spent more time trying to install than learning ABAP.Most of the issues with trying to install this are either answered by the html documents on the kernel disc or by the FAQ doc at www.IT-minds.com search on ABAP and look for the resources.
One issue these documents will not solve is, if you have / had a version of SQLserver installed. As the disc only uses the MSinstaller_01 and can only use the default instance of MS SQLserver2000 desktop engine (MSDE2000). -
i have noticed minisap comes with bw, however, when trying to create a client copy for bw i keep hitting a wall and just keep wondering if oltp and olap can be put on top of the same database. is this at all feasible? when trying any of the bw transaction in client 000 i get kicked out with a message that 000 is not the client for bw to work in. i have Windows XP, 2GB RAM and very little space on my HD. Running Essbase OLAP is not an issue.
i get the client 000 error message when doing client copy (SCCL) even when logged into the newly created client using sap* id, the actual missing point here was to update the RSADMINA table with the new client number, the note 793717 seems to be wrong to suggest to make (start?) an entry in the V_CCCEXIT table. It's the other way round. I have removed the entry from there, ran SCCL. The steps for BW client in your minisap then are:
1. scc4 create new client shell for bw
2. remove the entry from V_CCCEXIT table (see note 793717)
3. sccl with the relevant profiles
4. se16 RSADMINA table with the new client number
To check run trx rsa1.
Message was edited by: greg misiorek -
Configuration of STMS and Importing trnasports into Minisap
Hi all Experts
I am trying to import transports into my minisap. Please help how i should do it.
First i tried to configure STMS
(configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute and activate TMS Configuration
I got the folowing error.
File
xpp29\sapmnt\trans\bin\TP_DOMAIN_NSP.PFL could not be opened for writing (No such file or directory)
What is the Solution
Thanks a lot
FissThis thread might help you -:) Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview
Greetings,
Blag. -
Hi guys,
I am working on my final term paper at university with the MiniSAP Netweaver 7.2 Trial Version but after a month using it I am having some troubles.
1 - I can not access minisap (system NSP) with BCUSER because the license is not valid.
2 - I can log on the system with user SAP* and can access SLICENSE transaction but here I have more issues:
2.a - New License and Old License buttons are not working (no action when I click on them) and they just appears in tab "Goto"
2.b - No Hardware Key
2.c - Screen different from the other guys that I checked here in forum.
My initial screen:
I could get the hardware key using the command saplicense -get and I entered in that link (.../minisap) and get a file:
----- Begin SAP License -----
SAPSYSTEM=NSP
HARDWARE-KEY=Z1663060450
INSTNO=DEMOSYSTEM
BEGIN=20130402
EXPIRATION=20130702
LKEY=MIIBOwYJKoZIhvcNAQcCoIIBLDCCASgCAQExCzAJBgUrDgMCGgUAMAsGCSqGSIb3DQEHATGCAQcwggEDAgEBMFgwUjELMAkGA1UEBhMCREUxHDAaBgNVBAoTE215U0FQLmNvbSBXb3JrcGxhY2UxJTAjBgNVBAMTHG15U0FQLmNvbSBXb3JrcGxhY2UgQ0EgKGRzYSkCAgGhMAkGBSsOAwIaBQCgXTAYBgkqhkiG9w0BCQMxCwYJKoZIhvcNAQcBMBwGCSqGSIb3DQEJBTEPFw0xMzA0MDMwMjE2MTZaMCMGCSqGSIb3DQEJBDEWBBSn6F4dcd88E0nirc8Vfdj/fgxn/DAJBgcqhkjOOAQDBC8wLQIVAJ7of5e51KMUkMmM4REYmA+om+bHAhQaeOB/R5nrDvia11fz/xX9hvdcHA==
SWPRODUCTNAME=NetWeaver_ADA
SWPRODUCTLIMIT=2147483647
SYSTEM-NR=000000000311924921
But when I try to install it the screen that I get is this one:
Again, no HW key, no expiration date, status blank (grey)... If I try to log on again using BCUSER I have the same message (invalid license key).
Another point in command, saplicense -show, I have the result below:
C:\Users\nspadm>saplicense -show
saplicense: no license entries found
"no license entries found..."
And in the SAP Management Console:
I have all my software in this system to use in my term paper for university and I need to continue using the system with BCUSER to finish it.
Could you please help me?
Thanks!
Tobias
[email protected]Hi Martin,
Thanks for you answer.
Yes, I obtained it through this link.
The HW Key I got via command (saplicense -get) and the the system ID I selected the option:
NSP - SAP Netweaver 7.x (Windows/MaxDB).
I am using a virtual machine with Windows 7 in a MacBook.
The first strange behaviour in this system is the SLICENSE transaction.
Because I don`t have the New License pushbutton and the Old License pushbutton, just in the tab Goto and when I push it, nothing happens.
Tobias -
Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview
Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR: The following call returned with exit code 7:
ERROR: sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
ChristophHi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) * ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha -
Gurus:
Does anyone know how to get a Developer Key for MiniSAP?
I had successfully installed MiniSAP and have been coding ABAP for a month...now I had to update the License for MiniSAP and since I have successfully installed the new license (good for 90 days), now when I enter SE38 to modify or create my code it asks for a Developer's Key (also called a License Key).
If I go to OSS with my S-User that doesn't work either, as DEMOSYSTEM is not a registered system to ask for a key.
I'm stumped....any guidance would be deeply appreciated, as at the moment...no coding possible.
(I could reinstall MiniSAP, but then I lose all my code) eh?
Thank you!
Al Perkins
P.S. I do see the key # in the table DEVACCESS, but when I type in that key for BCUSER...well...nothing....doesn't accept that key.Where would we be without Google! Unreal...I found the answer to my question and am now up and running just fine.
For those interested follow this link: http://bit.ly/a6VAWQ -
Where can i download minisap for free ?
Hi,
where can i download minisap for free ?
differences between minisap and sap?
RegardsHi
Padma
refer these below links it may help u..
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
ftp://ftp.sap.com/pub/sapgui/win/640/
http://www.geocities.com/incho_master/MiniWAS.htm
please reward if they are usefull...... -
Hi,
Please, I need to install WAS en my Laptop. I have installed MiniSap and My question is if possible to Install WAS in this system and How do I it install?,
Best regards,
Jhonny MuñozIf you have installed the Preview edition of MiniWAS 6.20 or one of the 640 versions then you have the WAS system?
If you are asking how to install this then check out this weblog.
/people/sap.user72/blog/2004/12/08/mini-me-of-was-620-the-saga-continues -
ABAP Trial Version SP12:Error while setting up transport environment
Hi Folks,
I have successfully installed ABAP trial SP12 on my notebook(XP) and have been able to create some objects.
Thanks to very effective blogs by Manfred Lutz .
Now, I'm trying to set up the transport environment as per the blog but face the following error when I execute the step 'Distribute and Activate TMS Configuration'
Appreciate any help in solving the issue. I'm detailing below the error and the checks I had done.
******ERROR*************************************************************
ERROR:
Could not start transport control program tp
LONG TEXT:
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I did the following based on the long text and after searching the forum:
*(1)*
Run program RSTPTEST to localize error.
The program gave the following result for the RFC destination 'CALLTP_WindowsNT':
********RESULT OF RSTPTEST***********************************************
"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'#Timeout during connection setup (check that partner exists)"
*(2)*
Run the connection test in SM59 for destination 'CALLTP_WindowsNT':
The results were inconsistent. The connection test failed often but it was ok a few times.
The details of the connection failure are as follows:
*******CONNECTION FAILURE RESULTS******************************************************
Cancel
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' Timeout during connection setu
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host JayNB / sapgw00
DETAIL: no connect of TP D:\SAP\NSP\SYS\exe\run\tp.EXE from host JayNB after 2
COMPONENT: SAP-Gateway
COUNTER: 22
MODULE: gwr3cpic.c
LINE: 5873
RETURN CODE: 242
SUBRC: 0
RELEASE: 700
TIME: Sun Mar 23 11:07:53 2008
VERSION: 2
*(3) I then went to STMS and regenerated the RFC destinations and then ran the connection test. The result was OK.
Now, I again execute the 'Distribute and Activate TMS Configuration' step . It still gives the same error.
When I run the connection test in SM59, it results in error.
Further checks:***********************
(a) The permissions for folder SAP in the local directory were done as instructed in the blog.
(b) the directory path /SAP/trans/bin had the following files:
*TP_DOMAIN_NSP.PFL* : the last modified date changes every time I execute 'Distribute and Activate TMS Configuration'.
*DOMAIN* :The last modified date is in the past. It does not change.
Please inform how do I set up transport.
Jay
Code Formatted by: Alvaro Tejada Galindo on Apr 1, 2008 4:43 PMHi Krishna ,
Thank you for the suggestion.
I did as you suggested by inserting the mapping of ip and host in the hosts file.
and restarted the server,but I still get the same error "could not start transport control program tp".
Any other step that I'm missing.
Thanks again
Jay -
Hello,
I wanted to update the SPAM transaction to the newest release.
Unfortunately I get the following errors:
Error in phase: CHECK_REQUIREMENTS
- Reason for error: TP_CANNOT_CONNECT_SYSTEM
- Return code: 0208
- Error message: error in transportprofil (param missing,
unknown,...)
After trying tp connect nsp I get
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 370.00.09 (release 700)
E-TPSETTINGS could not be opened.
EXIT
ERROR: System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in TPSETTINGS: transdir not set.
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
tp finished with return code: 208
meaning:
error in transportprofil (param missing, unknown,...)
So, I checked if the transport profile is there. There is a file TP_DOMAIN_NSP.PFL in trans/bin.
But if I try to distribute and activate the profile I get the following error:
File
DE-L068199\sapmnt\trans\bin\TP_DOMAIN_NSP.BAK could not be opened for writing (Permission denied).
There is a file TP_DOMAIN_NSP.PFL in D:\SAP\trans\bin, though.
So, I am not quite sure how to set the permissions of the file system (if that's the problem). My OS is Windows XP.
Thanks for any useful hint!...I don't think that's the problem.
If I check the transport tool via 'SPAM', all settings are reported as correct.
It even says 'TP_DOMAIN_NSP.PFL is readable'.
Looking into the action log:
Error during executing the tp command 'tp CONNECT NSP ...'
tp return code: '0212' , tp message: 'could not access file as supposed (see SLOG for mo' , tp output:
This is tp version 370.01.01 (release 700)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
Connection to Database of NSP was successful.
DE-L068199\sapmnt\trans\log\C080225.NSP for transport: ALL: Permission denied
Access denied on
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC (1)
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC is already in use (1), I'm waiting 1 sec (20080225145815). My name: pid 5124 on
DE-L068199 (SYSTEM)
Access denied on
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC (2)
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC is already in use (2), I'm waiting 3 sec (20080225145816). My name: pid 5124 on
DE-L068199 (SYSTEM)
Access denied on
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC (10)
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC is already in use (10), I'm waiting 4 sec (20080225145843). My name: pid 5124 on
DE-L068199 (SYSTEM)
DE-L068199\sapmnt\trans\tmp\SLOG0809.NSP.LOC: Permission denied
PANIC > exiting
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0212
standard output from tp and from tools called by tp:
This is R3trans.exe version 6.14 (release 700 - 28.11.06 - 18:05:00).
2EETW152 Cannot open file "
DE-L068199\sapmnt\trans\tmp\C080225.NSP".
R3trans.exe finished (0012).
So, for some reason files are not accessible, but I don't see why. Any idea? -
Problem while importing trasnsports
Hi,
I have 2 parallel NW2004sSneakPreviewABAP servers running. I need to transport applications from one server to another. I am able to release the transports from the development server. I have copied the cofiles and data directories from the trans directory of the destination server.
When i try to use import queue it gives me an error "Transport control program tp ended with error code 0208".
Please Help!!.
Thanuin STMS when i click on import overview and then click on display import queue it displays the following error.
System NSP Command TMS_MGR_READ_TRANSPORT_QUEUE
Client 000 Service Transport Service
User TMSADM Start Online
Date 27.01.2007 Function TMS_TP_SHOW_BUFFER
Time 09:15:10 Message TP_REPORTED_ERROR
Transport control program tp ended with error code 0208
Errors: error in transportprofil (param missing, unknown,.
This is tp version 340.15.28 (release 700)
E-
KURINJI\sapmnt\trans\bin\TP_DOMAIN_NSP.PFL could not be opened.
EXIT
ERROR:
System : Parameter SAPEVTPATH not set. Batch jobs cannot be started.
Error in
KURINJI\sapmnt\trans\bin\TP_DOMAIN_NSP.PFL: transdir not set
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0208
Please help
Thanu -
Oracle AS Adapter for SAP R/3
Hello everyone.
I have some questions abuot the Oracle AS Adabter for SAP.
I have to get values out of miniSAP and integrate them in a BPEL Process. In SAP there is a function to generate a Webservice out of a BAPI for example! This Web Service I want to include in a bpel process. This is the way I try it till now!!!!
Now I read an article about the Adapter.
Is the task i explained abouve possible to do it with the adapter?
If yes, Can I include every BAPI in a bpel process with the adapter?
What are the prerequisites I need for the adapter? I have installed an Infrastructure, a Middle Tier (Portal) and the BPEL process manager.
Thanks a lotThank you veyr much Manoj for your reply. I just tried it now buit no fruits.
I wonder if it can really be due to privileges given to my account, which allows to connect thru SAP Front-end but does not allow to connect by any other means. I can not think of any other possible reason. -
How to mapp logical repositories to physical ones
hi,
i ve created logical repository in miniSAP and know i want to know how to map it to physical repositories?
waiting for reply
regards,
nasirhi,
i ve created logical repository in miniSAP and know i want to know how to map it to physical repositories?
waiting for reply
regards,
nasir -
Problem installing SolMan 4.0
Hi to everyone!
I'm having a problem in the step 16 (Perform post-load activities) of the Solution Manager 4.0 installation on Windows 2003 and Oracle 10.0.2.
The Windows displays an error message "The procedure entry point longjmp could not be located in the dynamic library orauts.dll".
The SAPINST log record this:
INFO 2007-03-01 20:53:22
Copied file 'D:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'D:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.64.xml'.
INFO 2007-03-01 20:53:22
Copied file 'D:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'D:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/inifile.65.xml'.
INFO 2007-03-01 20:53:26
Copied file 'D:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'D:/Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/keydb.33.xml'.
INFO 2007-03-01 20:53:26
Execute step setOraclePasswords of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0.
INFO 2007-03-01 20:53:39
Removing file D:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-03-01 20:53:39
Creating file D:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\ora_query3_tmp0_1.sql.
INFO 2007-03-01 20:53:39
Switched to user: gd0adm.
INFO 2007-03-01 20:53:39
Working directory changed to D:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
INFO 2007-03-01 20:53:42
Switched to user: gd0adm.
INFO 2007-03-01 20:53:42
Creating file D:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS\brconnect.log.
INFO 2007-03-01 20:53:42
Switched to user: gd0adm.
INFO 2007-03-01 20:53:42
Working directory changed to D:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\ORA\CENTRAL\AS.
INFO 2007-03-01 20:53:42
Output of C:\usr\sap\GD0\SYS\exe\uc\NTI386\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX is written to the logfile brconnect.log.
WARNING 2007-03-01 20:53:45
Execution of the command "C:\usr\sap\GD0\SYS\exe\uc\NTI386\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX" finished with return code 3. Output:
BR0801I BRCONNECT 7.00 (12)
BR0999E Loading of SQL client library orasql10.dll failed - please check Oracle configuration
BR0310E Connect to database instance GD0 failed
BR0280I BRCONNECT time stamp: 2007-03-01 20.53.45
BR0804I BRCONNECT terminated with errors
ERROR 2007-03-01 20:53:45
CJS-30023 Process call 'C:\usr\sap\GD0\SYS\exe\uc\NTI386\brconnect.exe -u / -c -f chpass -o SAPSR3 -p XXXXXX' exits with error code 3. For details see log file(s) brconnect.log.
ERROR 2007-03-01 20:53:45
FCO-00011 The step setOraclePasswords with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_ORA|ind|ind|ind|ind|0|0|setOraclePasswords was executed with status ERROR .
and the BRCONNECT log's shows this:
BR0801I BRCONNECT 7.00 (12)
BR0999E Loading of SQL client library orasql10.dll failed - please check Oracle configuration
BR0310E Connect to database instance GD0 failed
BR0280I BRCONNECT time stamp: 2007-02-25 14.40.47
BR0804I BRCONNECT terminated with errors
Could anyone help me with this error?
Thanks a lot for all your time!!!
Regards!
GuilleThank you very much for all your help.
The system is Windows 2003 32 bits.
The rights for the user seems to be OK.
Now, I attach the tnsnames.ora, listener.ora, trans.log and default.pfl
Thanks in advance again for all your help!!!
tnsnames.ora:
Filename......: tnsnames.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#4 $
GD0.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = cuervo)
(PORT = 1527)
(CONNECT_DATA =
(SID = GD0)
(GLOBAL_NAME = GD0.WORLD)
listener.ora:
Filename......: listener.ora
Created.......: created by SAP AG, R/3 Rel. >= 6.10
Name..........:
Date..........:
@(#) $Id: //bc/700-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#4 $
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = GD0.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = GD0)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = cuervo)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = GD0)
(ORACLE_HOME = D:\oracle\GD0\102)
trans.log:
4 ETW000 R3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 07.03.2007 - 22:06:46
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Wed Mar 07 22:06:49 2007 6859 0.006859
4 ETW000 [dev trc ,00000] db_con_init called 24 0.006883
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 40 0.006923
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 35 0.006958
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 67299 0.074257
4 ETW000 [dev trc ,00000] using "C:\usr\sap\GD0\SYS\exe\uc\NTI386\dboraslib.dll"
4 ETW000 35 0.074292
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 17 0.074309
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 28 0.074337
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.46)
4 ETW000 46045 0.120382
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 30 0.120412
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 40 0.120452
4 ETW000 [dev trc ,00000] New connection 0 created 24 0.120476
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 38 0.120514
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 21 0.120535
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 30 0.120565
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 23 0.120588
4 ETW000 [dev trc ,00000] Prepending C:\usr\sap\GD0\SYS\exe\uc\NTI386 to Path.
4 ETW000 686 0.121274
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 418 0.121692
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 335695 0.457387
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPGD0's password 26 0.457413
4 ETW000 [dev trc ,00000] Connecting as /@GD0 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 25 0.457438
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 272 0.457710
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244D2C8 024527FC 02452084
4 ETW000 34 0.457744
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 5381 0.463125
4 ETW000 [dev trc ,00000] Allocating server context handle 23 0.463148
4 ETW000 [dev trc ,00000] Attaching to DB Server GD0 (con_hdl=0,svchp=02451FD0,svrhp=02463844)
4 ETW000 9131 0.472279
4 ETW000 [dev trc ,00000] Wed Mar 07 22:06:58 2007 9049762 9.522041
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
4 ETW000 28 9.522069
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12154'
4 ETW000 20 9.522089
4 ETW000 [dev trc ,00000] Try to connect with default password 344 9.522433
4 ETW000 [dev trc ,00000] Connecting as SAPGD0/<pwd>@GD0 on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 33 9.522466
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 33 9.522499
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244D2C8 024527FC 02452084
4 ETW000 42 9.522541
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463844) 12 9.522553
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451FD0,srvhp=02463844)
4 ETW000 19 9.522572
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463844 15 9.522587
4 ETW000 [dev trc ,00000] Allocating server context handle 14 9.522601
4 ETW000 [dev trc ,00000] Attaching to DB Server GD0 (con_hdl=0,svchp=02451FD0,svrhp=02463844)
4 ETW000 28 9.522629
4 ETW000 [dev trc ,00000] Wed Mar 07 22:07:07 2007 8985572 18.508201
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12154
4 ETW000 32 18.508233
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12154'
4 ETW000 20 18.508253
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12154 performing CON [dblink#3 @ 431]
4 ETW000 11283 18.519536
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12154: TNS:could not resolve the connect identifier specified [dblink#3 @ 431]
4 ETW000 21 18.519557
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'GD0'"
default.pfl:
SAPDBHOST = cuervo
j2ee/dbtype = ora
j2ee/dbname = GD0
j2ee/dbhost = cuervo
SAPSYSTEMNAME = GD0
SAPGLOBALHOST = cuervo
SAP Central Service Instance for J2EE
j2ee/scs/host = cuervo
j2ee/scs/system = 00
j2ee/ms/port = 3900
rdisp/bufrefmode = sendoff,exeoff
SAP Messaging Service for ABAP
rdisp/mshost = cuervo
rdisp/msserv = sapmsGD0
rdisp/msserv_internal = 3901
SAP Central Service Instance for J2EE
SAP Messaging Service for ABAP
login/system_client = 001
Maybe you are looking for
-
Data Integrator: Arabic characters are not correctly displayed
Hi, I'm trying to load Arabic text via an UTF8 flat file into an Oracle database. I've read several topics and set the correct code page settings (also during install) for the datastore and flat file. Already in flat file preview (see attached screen
-
What settings give the BEST audio quality (original audio CD to iTunes)
Further to my last post, can ya'll PLEASE help me get the bottom of this? I have heard so many different opinions & need to resolve ASAP.... What pref' settings will give me the VERY BEST audio quality, when importing original audio CD's into iTunes
-
Hi, Is it possible to hide a radio button in the selection screen? If yes, how? I tried no-display but i am getting an error message. We are copying a standard program and we just wanted to hide all the fields that we do not need so that we do not ha
-
Colour change when placing Photoshop image
Help needed! In Indesign CS4 I have created a template and within the program have made a couple of rectangular boxes filled with 20% black, placed on the master pages. These have text placed over them in the main pages. Placing a Photoshop CS4 .psd
-
HD configuration for new system
Hey guys, I'm planning to build a new workstation and just wanted to have some ideas regarding the HD configuration. Working with cs6 PR AE PS LR + few 3d party plugins mostly on canon 5D mk 3 footage editing, grading, keying + some 3d stuff what i