Minisap dont show ALV
Hi abapers,
I am using the minisap 4.6 version, to study. I like to see the data from a table (spfli, saplane or any other, in the "contents" button) but i cant do it.
I tried to create an alv grid with function and with O.O but they didnt display me the data. Then, I tried this code:
http://www.erpgenie.com/abap/controls/alvgrid.htm
and nothing happens again... Can someone tell me what i doing wrong? Or my old minisap is the problem...
Thanks in advance.
Hi Rodrigo,
Sometimes, it can also be due to code problems. Two checks you need to do here.... First check is to find out if data is available in the internal table passed to the Method <b>SET_TABLE_FOR_FIRST_DISPLAY</b>...Second check is to verify whether the screen details in screen painter has been activated or not..To check that , double click on the screen number in the statement
CALL SCREEN 100.
You will be directed to the screen painter. Just check if the screen is activated.Sometimes, it can happen like that....If not active, activate it and execute the program again...
Hope this will help you..
Regards,
SP.
Similar Messages
-
I am using the iphone 4s in india now. i bought it from canada (factory unlocked). But here in india. when i put my vodafone sim in 4s. It only shows th name of the carrier but dont show the range towers. i tried airtel and reliance carriers also.but the result was same. now what can i do??
BobbyLe wrote:
I could not follow the AT&T instruction because my network (Optus) doesn't have anything as username or password or dial-up phone number. The only parameter I needed to key into Mobilink (the software I am running on the S10 is the APN which is: connectme that's it no number, no PIN, no password, nothing else.
How do I tell Windows to do that?
*99***1# <--- the number to call
at+cgdcont=1,"ip","connectme" <----- the string to put in the advanced field of the modem -
i have an ipod touch and lyrics dont show up when i play a song. i know how to insert lyrics they just dont show up. what can i do?
Are you trimming the videos on the iPod?
http://blogs.vancouversun.com/2010/09/20/how-to-fix-out-of-sync-audio-on-videos- taken-with-your-iphone-or-ipod-touch-4g/
Also see:
https://discussions.apple.com/message/12873340#12873340 -
Songs on my ipod dont show up the way they do in itunes
there have been a few cds that when I add them to my iTunes library work great, but once I put them on my iPod they dont show up where they're supposed to. For example, I have The Beatles' 1 album and it shows up in iTunes:
Artist: The Beatles
Album: 1
and when I get on my iPod there is no artist for The Beatles or Beatles, The or anything. But when I look in albums I can find the 1 album and thats where all the songs are. When the songs are played, it also says that the artist is The Beatles, but it still wont show up on the artist list. The same thing has happened in other ways, like one of my cds doesnt show up under the artist or album lists but I can pick the individual songs out of the songs section. How can I fix this? it shows up correctly when the song is actually plated, and on my itunes, but they arent categorized at all.
iPod 30gbThis isn't foolproof but there are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song is marked as part of a compilation or 2) it is missing an album name.
If the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Compilations are stored in a separate folder in iTunes so the songs don't appear inside the normal Artist>Album folder which may be why this happens.
Also if tracks are missing an Album name in the Info tab, this information needs to be filled in, in the absence of one you can just add None or Miscellaneous. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod -
When i click import, then open external hard drive the bookmarks dont show. If i open the external drive via 'start/computer' i can see them in it ok,.
Yes, that is a JSON backup, so you need to remove the .html file extension and add a .json file extension instead.<br />
If Windows is stubborn and doesn't want to change the file type but merely changes the name to bookmarks.json.html then try to add quotes around the name when renaming or (temporarily) disable hiding the file extension.
*http://kb.mozillazine.org/Show_hidden_files_and_folders
Note that restoring a JSON backup will replace the current bookmarks, so you lose any bookmarks that aren't in the backup unless you first export the bookmarks to an HTML file.<br />
Then you can import that file after you've restored the JSON backup.
*http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox -
Aperture galleries on MobileMe dont show up on iWeb?
I have created some galleries in Aperture and sync'd them with my MobileMe account. I also have a website hosted on the same account but these galleries dont show up in iWeb when I try and link them? Galleries created in iPhoto show up fine and work as they should, its just the Aperture ones. They are visible however if I go direct into my MobileMe page and into the galleries?
Any ideas?Im having a similar problem. I had had problems with my computer so i got a new one and downloaded the itunes store. But the thing is, even when i authorized the computer transferred my purchases and reset it by the menu and select keys, the new songs i downloaded to my ipod wont show up! Im so frustrated and i REALLy need some help.These are some of my favorite songs and the old ones are still their but i cant get the new ones!
-
my iphone 4s wont connect in apple tv 3rd gen dont show the airplay icon, but apple tv can connect in Bose sound touch 20 via airplay, and the iphone also connect to sound touch 20 via airplay, ive just buy it yesterday in Mediamarkt Spain,, so it means theres something wrong between my iphone and the apple tv? please me
Hi jaredfox06,
If I understand the issue correctly, you have recently purchased a used iPhone and you do not see your Apple TV in the control center in order to AirPlay. To troubleshoot this issue please follow the steps outlined below.
Try these steps first
Make sure that you have the latest software on your iOS device and Apple TV.
Make sure that both devices have Wi-Fi turned on.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network.
If you're trying to use peer-to-peer AirPlay, make sure that both devices have Bluetooth turned on.
On your iOS device, go to Settings > Bluetooth.
On your Apple TV, go to Settings > General > Bluetooth.
If you don't see AirPlay in Control Center
When an AirPlay-enabled device is available, you'll see AirPlay in Control Center on your iOS device.
If you don't, try these steps:
Restart your iOS device and Apple TV.
Connect both devices to the same Wi-Fi network.
On your iOS device, go to Settings > Wi-Fi.
On your Apple TV, go to Settings > General > Network. If your Apple TV is connected using Ethernet, make sure that it’s plugged in to the router you're using for Wi-Fi.
On your Apple TV, make sure that AirPlay is turned on. Go to Settings > AirPlay.
Get help using AirPlay and AirPlay Mirroring on your iPhone, iPad, or iPod touch - Apple Support
Have a good one,
Alex H. -
My iphone dont show image artist
hi please help me
my iphone model 5s is dont show arist image in music player
serial number : F1*****F9R
IMEI/MEID : *****
Update : IOS 7.1.2
<EDITED by HOST>Hello Mr.Rahgozar,
Thanks for using Apple Support Communities.
The reason why it's not showing any album art, is because no album art was downloaded. To download album art please follow the articles below:
iTunes 11 for Windows: Add artwork to songs and other items
http://support.apple.com/kb/PH12361
iTunes 11 for Mac: Add artwork to songs and other items
http://support.apple.com/kb/PH12161
Take care,
Alex H. -
Attached images dont show up. One has to select message -> alternate view to preview incoming attachements; if i send attachements to windows or mobile systems they dont show up at all. Is this a snow bug? does anyone know this issue and has a solution ready?
Please create a New User Account, and as that New User launch Mail and try setting up this IMAP email account. See the following if not familiar with adding a new user account (which I am sure you are):
http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
The reason for doing this is to test the Mail app itself and the particular settings in the normal user account, and not to permanently switch to a new user account. Tell me if the behavior continues in that New User Account with Mail and these messages?
Ernie -
Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??
It sounds as if you have Voiceover activated. You should be able to turn it off by triple tapping the Home button.
-
I just got my Iphone 5 (32g) and half of my Album covers dont show up on my iphone. Any reason why?
I just got my Iphone 5 (32g) and half of my Album covers dont show up on my iphone. Any reason why?
http://support.apple.com/kb/ts3694#error1603
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts. -
I updated song titles in itunes but the changes dont show up on my ipod
I updated song titles in itunes but the changes dont show up on my ipod. It still shows the old song titles. Help!!
Did you try unsyncing the songs and then resyncing them?
-
I keep taking screen shots but they dont show up on my desktop and i dont know how to find them
helppp
i keep talking screen shots but they dont show up on my desktop and i dont know how to find them!I have the same problem. One of the reliable things about Apple OSX, that we could count on screenshots being simple. Then DropBox came along. I suspect DropBox is the culprit here. I don't mind, even am grateful if DB captures my captures, but who gave them permission to totally changes my whole universe!!?
-
i purchased songs on itunes that dont show up on my new device. if i go to the itunes store, it says the song is purchased yet still doesnt show up on my itunes...
Click here and follow the instructions.
(115238) -
Changes in java file dont show up on site
hi
i'm using tomcat4 server.
i use java jsp html files for developing the website.any changes to jsp files show up on refreshing the page but when i do changes in java files (which are called from jsp files) compile them and refresh the page the changes dont show up.
even restarting the server didn't help.
when i delete the .class file of that java code still the server runs when it is called from jsp file.
it doesn't give filenotfound or classnotfound error which is expected in such case.
can anybody plz tell me what to doDid you not overlook something, like putting a jar containing (previous versions of ) your classes to "lib" ?
Maybe you are looking for
-
I am having a problem with just one video on YouTube, and I can't explain it or get it to play; it just shows the Loading screen indefinitely. Here is a link to the video: Extreme Funny: http://youtube.com/watch?v=GuMMfgWhm3g The clip plays fine on t
-
Launch Adobe from within LabVIEW
I have 6 years experience drawing code in LabVIEW but very little experience using Active-X; if there is some sample code showing the how to launch an Adobe document from a LabVIEW GUI, it would be extremely helpful. I am running LabVIEW 6.0.2 on a W
-
I clicked the text menu and then I clicked on align. I highlighted the text and the bar but I tried to center the text on the bar but it doesn't work correctly. Can anybody help me? http://server6.theimagehosting.com/image.php?img=fireworks.cd6.gif[L
-
Third party ships goods. Automatic GR in our company?
Hi, We have a PO. The PO idoc is send to the vendor (orders05). The vendor sends an confirmation Idoc back (ordrssp). Then then vendor sends the goods directly to the end customer. Can I post an automatic goods receipt? We do not check or the custome
-
When is too simple, reasoning not to use Java?
I wish to write a small program which gives the user 6 or 7 options. When the associated radio button is selected, a different executable file will be executed. Is this overkill to script this with Java? Should I be simply writing a batch file for th