Minisap install gone all wrong

I used the uninstall, which failed to get rid of the database. The database management tool asks for a userid/password but does not recognise the password so won't uninstall the maxdb database. Is there any maxdb admin userid/password I can use? Or how can I delete the database so I can reinstall minisap?
thanks .... ANdy

You could try the following:
Open a command-line console and write:
dbmcli -d NSP -u control,<password> db_offline
and if it works
dbmcli -d NSP -u control,<password> db_drop
This will drop your DB instance and allow you to unistall the DB software.
Regards,
Klaus

Similar Messages

Install has gone all wrong

My ipod broke.
guess what? i bought a new one! i have an imac G5 and was on OSX 10.3.X(.8 i think) anyway, got my new ipod 'classic' wey hey! and.... cant use it, as its system requirements need 10.4!!!!
perhaps i was wrong to assume an ipod classic mp3 player woudlnt need an operating system upgrade but ill not moan!
bought Leopard to more expense, which arrived today, chose the install option, which promted me to re-start and begin the installation setup, but it re-started and got to a grey screen with whirring rainbow wheel and stuck there for around 30 minutes atleast, the disk drive sounded busy but it was getting nowhere so i used the power button to re-start and its stuck on the grey apple icon screen with the progress circle moving round and round and the disk making sounds again...
going on holiday tomorrow so in a panic to get it sorted as long boat/train and plane rides without my ipod will be a nightmare!

As I said, if your iMac is the one described in the "this one" link, it only came with 256 MB of memory unless you ordered extra memory from Apple when you bought it, using the "BTO" (built to order) option available only from Apple; or you or someone else added to or replaced the original memory modules with larger aftermarket ones. FWIW, Apple's BTO memory upgrade is relatively pricey; most people remember if they used it.
Unfortunately, I don't have much experience with Macs that came with 10.3.x installed so I'm not sure your original installer discs (not the new Leopard one) has an option to run System Profiler from its "Utilities" or similarly named menu. If it does, you can start up from that disc & instead of running the installer, use its copy of System Profiler to tell you how much memory is installed. This should tell you if insufficient memory is the problem or not.
As a general rule, to avoid unpleasant surprises don't neglect your responsibility to make sure you can meet the minimum system requirements of your potential purchases before you buy them. For Apple products, the online Store is an easy source of this info, for instance at iPod classic - Apple Store (U.S.) or Mac OS X v10.5.6 Leopard - Apple Store (U.S.).

First steps problems - instalation goes all wrong

Hi, I just bought a adobe creative and, when I tried to install it, it came with error code 205 (I google it, and the adobe forum said it was a corrupt file problem). i tried again in another brownser, but now, it wont recognize my accout. The way it shows its like I never bought anything, and I cant install the Adobe Download Manager. What should I do?

Hi There,
If you are getting error 205 please try the steps mentioned in the below mentioned link
Error downloading and installing Creative Cloud application
Meanwhile, you are troubleshooting error 205, you can initiate the download for the software that you need from an alternate source.
Download CC 2014: Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools.
Thanks,
Atul Saini

Leopard install gone horribly wrong

Decided to buy Time Capsule today for use with my Macbook. Can't remember the specs but it's just a year old so I've been running 10.4. Knew I needed 10.5 for Time Machine so I bought Leopard today too.
I popped the disc in and it scanned it for 20 minutes or so and then gave an error saying the install failed. Restarted and tried again and asked me to partition or clean install. Or something along those lines. So I tried to cancel out as I don't have my files backed up. From then on in my Macbook only shows the grey screen with the spinny wheel for a few seconds and then black screen. I was able to get the DVD out by holding down the mouse while resarting. But my Macbook still won't start up. Just the grey screen for a bit and then blackness.
Any ideas? PLEASE!

First you need to get your data backed up before doing anything else.
Get an external drive (I don't know if your time capsule will work for this) and hook it up to your Mac. Boot from your Leopard or Tiger install DVD. Launch Disk Utility from the Utilities menu. Use the Restore tab to clone your internal drive to your external drive.
Then use Disk Utility's First Aid tab to repair your internal drive. If Disk Utility cannot repair it, you will need to erase it completely, and install Leopard from scratch. You can then recover your data from your backup drive, and your iLife apps from your Tiger DVD.

Removing imlib2-cvs: "something has gone horribly wrong

Hi there,
I did a pacman -Syu today, and pacman wanted to replace imlib2-cvs with imlib2. So far, so good. I said "yes" to the removal, but pacman complained that ffmpeg and adesklets require imlib2-cvs.
So I deinstalled those two packages.
Now, if I try to upgrade, I get the following error message:
error: something has gone horribly wrong
If I pacman -R imlib2-cvs, it claims that imlib2-cvs is required by adesklets and ffmpeg--even though those two packages have been removed.
So obviously, something has gone wrong with the pacman "database." Question is: how can I fix it? Delete the entries for adesklets and ffmpeg in /var/lib/pacman? Delete the entry for imlib2-cvs? Do something completely different?
Some feedback would be much welcome. I hope my system is not broken for good ...
Cheers,
-Sascha.rb

pacman -Rd imlib2-cvs
pacman -S imlib2
... let me install the new imlib2 package, after all. No idea whether it fixed the weird dependency issue I had ("something has gone horribly wrong"), but at least it's working ...

Macbook screen has gone all fuzzy

Yesterday I updated my mac with the new SMC firmware.
On the restart my screen has gone all fuzzy, and the colours have gone all strange.
It does this in both mac OS X, windows vista and the boot screen. When I take a screen grab of the screen and send it to another computer the image is normal, as if this problem did not occur.
I've done a hardware test from my install disks and it turned up no problem. I have also tried resetting the SMC firmware by turning the laptop off, unplugging the battery and holding the power button, but so far nothing has changed.
Any suggestions?
Thank you.

GfulDedFan,
Thank you for your reply,
I might have been wrong about the SMC update.
I got the update on my machine on the 17th, and I wasn't sure what exactly it was, and assumed it was the SMC update as it came out on the same date.
My machine is running an Intel chip set and was purchased in mid-2007.

This morning dreamweaver cs6 restarted as if it was just installed lost all sites

Hi Dreamweaver CS6 for mac osx
restarted this am as if i had just installed it, all the site definitions are gone and yes there are no recent backups
major pain, any idea of hour to get back my actual version?
it showing version 12.0.5861
the file in applications its showing as 12.0.3 build 5861
any ideas????
Thanks

mattyl99 wrote:
it showing version 12.0.5861
the file in applications its showing as 12.0.3 build 5861
Those are the same version. Macs just truncate the version number within the program itself, it's a known issue and doesn't affect how it runs.
Your sites are still on your hard drive, all you need to do is set up new definitions from the existing site folders to get them back.
Site > Manage Sites > New
When asked what you want to use for the local site root, browse to one of your existing site folders, add the FTP info and you should be good to go.
You aren't logged in under a different user account than the one you normally use, are you?

Pacman: "something has gone horribly wrong"

Hi all,
So I started The Big Xorg Upgrade on my laptop. First I removed xorg (to get around the bitstream fonts conflict) and started pacman -Syu. During the package downloads I noticed that I still use some old configuration where the downloads come from ftp.nethat.com , which is very far from me, whereas now I have a much closer mirror ftp.estpak.ee . So I killed pacman and wget, corrected pacman.conf, and rerun pacman -Syu. The downloads were finished nicely, but then I got the following message:
checking package integrity...done
error: something has gone horribly wrong
I have never seen such an error before, and probably I should not have seen it at all. But still I did:) So can anyone tell me what it is about and under which conditions is it shown? Should I file a bug report?
Jan
Edit: I cleared the package cache, downloaded all the packages from the same source and I still get the same message. So it was not a problem caused by the interrupted upgrade (and in fact I have done interrupted upgrades in the past with no problems). Any ideas and/or explanations are greatly welcome.
Jan

Cerebral wrote:
Hm... try upgrading xorg first, maybe?
pacman -S xorg
then the full update?
Tried that and the message is still the same.
Cerebral wrote:On an unhelpful note: that's possibly the scariest error message I've ever seen.
Yeah, Arch is not for cowards:D
But the mystery still stays ... any comments from the developers?
Jan

Why has my ipad camera suddenly gone all grainy?

when i got the ipad the camera picture was so clear, all of a sudden it has gone all grainy. the ipad hasnt been dropped or been near water. the camera has been cleaned and i have reset everything but othing works. i went to the apple shop today and was given another ipad but this one has the same problem (didnt have a clear picture to start with) am i doing something wrong? is there something i can do to fix it?
thanks jo

Your posts are meaningless unless you tell the world (yes - that is who is reading this) which iPad you have, which iOS you are running, and what the answer was.

ITunes store display all wrong!!!! any help please?

Hi
since the latest upgrade for iTunes the connection time has been getting longer and longer. Now when i click to open store the display is all wrong!!
the centre window for the store is almost like looking at old html language with the contents being listed underneath each other instead of being laid out in one page. to see it all i have to scroll down for ages.
I have a screen grab if anyone needs to see what i mean ( need an email address to send to).
I have unistalled itunes twice and even gone back to version 9 but still same problem.\
Still waiting on reply from Apple Support.
Can anyone help as its driving me mad!!

Have you changed the color management settings?
Does this happen immediately when opening the files?
Which setting in Photoshop do you refer to?

Bootcamp gone horribly wrong, Mac HD GONE

So I was installing Windows XP via bootcamp, and chose Drive C to format it in , but that was weird cause it didnt show any of the usual other drives, so i selected it.
After it was done installing it did the usual reboot, and after it rebooted all i get is a white screen.
I rebooted it again holding down the option key to select which partition to boot from and... ALL PARTITIONS WERE GONE
The Mac HD partition was gone, all I saw was the installation disc.
So i thought i would just reformat the whole drive and reinstall Leopard, but while i was doing that, when it gets to the step "Select a destination to install Mac OS X" Nothing is listed and it cant continue the installation.
So from the installer cd I went to Disk Utilities and confirmed that the Mac HD was gone and Windows partition from bootcamp mightve went over it and wiped it.And I cant even use that windows partition that was called "disk0" cause apparently is was formatted incorrectly.
I cant create a new partition on disk utilities either cause the buttons are greyed out.
What shall I do? I'm at an utter lost

Oh I tried looking up my HD info using the disk utilities info button and this is what i got.
The Macintosh HD partition got replaced with the Windows NTFS Partition named 'disk0' and didnt even format properly.
Name: disk0
Type: Volume
Disk Identifier: disk 0
Mount Point: /Volumes/Untitles
File System: Windows NT File System (NTFS)
Device Tree: /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Writable: No
Capacity: 186.3 GB (200,049,647,616 Bytes)
Free Space: 127.5 GB (136,904,531,968 Bytes)
Used: 509.7 MB (534,417,408 Bytes)
Number of File: 3,050
Number of Folders: 0
Owners Enabled: No
Can Turn Owners Off: No
Can Be Formatted: No
Bootable: No
Supports Journaling: No
Journaled: No
Disk Number: 0
Partition Numer: 1
Main Macbook Pro Harddrive:
Name: FUJITSU MHY2200BH Media
Type: Disk
Partition Map Scheme: Unformatted
Disk Identifier: Disk 0
Media Type: FUJITSU MHY2200BH Media
Media Type Generic
Connection Bus: Serial ATA 2
Device Tree: /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
Locked: Yes
Writable: No
Ejectable: No
Mac OS 9 Drivers Installed: No
Location: Internal
Total Capacity: 186.3 GB (200,049,647,616 Bytes)
Free Space: 127.5 GB (136,904,531,968 Bytes)
S.M.A.R.T. Status: Verified
Disk Number: 0
Partition Number: 0
It seems it says Locked and unwritable, could that be why i couldn't partition it?
Message was edited by: melonpan

My adobe reader once installed changes all of my files to pdf files...Why?

Adobe reader once installed changes all of my files to pdf files...why?

http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acrobat.html

Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID?

Hi. My husband and I have always shared the same iTunes account. Since installing iCloud, all our contacts and calenders have merged on our iPhone 4, which we do not want. How do I rectify this? Does my husband need to set up his own apple ID? If so, where do I need to change his email address info, so that his calender and contacts remain his? Thank you

You can continue to use the current AppleID for iTunes, but your husband can create a new AppleID to use to create a new iCloud account that will be his own and not overlap with yours. If you do not have another email address to use for an AppleID, just get a free Gmail account and use that.
You can have as many AppleIDs as you want (or at least, as many as you have email addresses for). You can use a separate AppleID for the store, another for iCloud, and even another for iMessage if you wish.
You will want to keep the current one as the shared one for the store as all your previous purchases are permanently tied to it, and thus you need that AppleID to update or redownload your current purchased content.

I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

I have a macbook pro with only 128gb of hard drive. I have lightroom installed and all my photos on an external hard drive. Can I store my lightroom library on the external hard drive too?

Yes. Find the LR catalog file by looking in Edit/Catalog Settings/General. Close LR and navigate to that spot. The catalog file is the one that ends in .lrcat - move it to wherever you want. Next to the .lrcat file is a subfolder called Previews.lrdata. You can move that over as well, but if you don't LR will generate new previews. Double-click on the .lrcat file in its new home and LR will open with that catalog. Set Preferences to When Starting Up Use Most Recent Catalog.

Since installing Maverick, all Adobe CC apps crash when I am trying to save or import.

Since installing Maverick, all Adobe CC apps crash when I am trying to save or import. I might be able to save the file if I do not try to select anything other folder than the current folder that opens (last opened). I do not use the cover view option (I see some have had problems with that), but almost always have it in list view.
Is there some setting I need to set or is there a fix for this somewhere?
Also, is it just me or does it seem like Mac crashes more now with Maverick than before?

Here is a portion log from Photoshop CC from Step 1
Date/Time:       2013-11-22 19:22:56 -0500
OS Version:      10.9 (Build 13A603)
Architecture:    x86_64
Report Version: 18
Command:         Photoshop
Path:            /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
Version:         14.1.2 (14.1.2.427)
Parent:          launchd [205]
PID:             437
Event:           hang
Duration:        1.16s (process was unresponsive for 9 seconds before sampling)
Steps:           12 (100ms sampling interval)
Hardware model: iMac9,1
Active cpus:     2
Fan speed:       798 rpm
Free pages:      338236 pages (+1861)
Pageins:         16 pages
Pageouts:        0 pages
Swapins:         0 pages
Swapouts:        0 pages
Process:         Adobe Photoshop CC [437]
Path:            /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
Architecture:    x86_64
Parent:          launchd [205]
UID:             501
Task size:       55405 pages
CPU Time:        1.087s
Note:            Unresponsive for 9 seconds before sampling
Thread 0x3216     DispatchQueue 1          priority    0-35   cpu time   1.086s
12 ??? (Adobe Photoshop CC + 10804) [0x100002a34]
    12 ??? (Adobe Photoshop CC + 2967993) [0x1002d49b9]
      12 ??? (Adobe Photoshop CC + 2967772) [0x1002d48dc]
        12 ??? (Adobe Photoshop CC + 556898) [0x100087f62]
          12 ??? (Adobe Photoshop CC + 23843020) [0x1016bd0cc]
            12 ??? (Adobe Photoshop CC + 23838178) [0x1016bbde2]
              12 -[NSApplication run] + 646 (AppKit) [0x7fff86dfea29]
                12 ??? (Adobe Photoshop CC + 23836328) [0x1016bb6a8]
                  12 ??? (Adobe Photoshop CC + 23833549) [0x1016babcd]
                    12 -[NSApplication sendEvent:] + 2021 (AppKit) [0x7fff86fae744]
                      12 ??? (AdobeOwl + 223946) [0x1043f6aca]
                        12 -[NSWindow sendEvent:] + 3721 (AppKit) [0x7fff8700df71]
                          12 ??? (Adobe Photoshop CC + 24599380) [0x101775b54]
                            12 ??? (Adobe Photoshop CC + 24595429) [0x101774be5]
                              12 ??? (Adobe Photoshop CC + 547869) [0x100085c1d]
                                12 ??? (Adobe Photoshop CC + 541782) [0x100084456]
                                  12 ??? (Adobe Photoshop CC + 9041949)
I also see this message:
*** Assertion failure in -[PSCocoaMenu itemAtIndex:], /SourceCache/AppKit/AppKit-1265/Menus.subproj.NSMenu.m:865
Also, here is a .hang report that I found
Path:            /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
Process:         Adobe Photoshop CC [939]
Path:            /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
11 ??? (Adobe Photoshop CC + 10804) [0x100002a34]
    11 ??? (Adobe Photoshop CC + 2967993) [0x1002d49b9]
      11 ??? (Adobe Photoshop CC + 2967772) [0x1002d48dc]
        11 ??? (Adobe Photoshop CC + 556898) [0x100087f62]
          11 ??? (Adobe Photoshop CC + 23843020) [0x1016bd0cc]
            11 ??? (Adobe Photoshop CC + 23838178) [0x1016bbde2]
                                      11 ??? (Adobe Photoshop CC + 23838420) [0x1016bbed4]
                                        11 ??? (Adobe Photoshop CC + 554787) [0x100087723]
                                          11 ??? (Adobe Photoshop CC + 555164) [0x10008789c]
                                            11 ??? (Adobe Photoshop CC + 582218) [0x10008e24a]
                                              11 ??? (Adobe Photoshop CC + 551140) [0x1000868e4]
                                                11 ??? (Adobe Photoshop CC + 1096492) [0x10010bb2c]
                                                  11 ??? (Adobe Photoshop CC + 1066245) [0x100104505]
                                                    11 ??? (Adobe Photoshop CC + 1106928) [0x10010e3f0]
                                                      11 ??? (Adobe Photoshop CC + 9028189) [0x10089c25d]
                                                        11 ??? (Adobe Photoshop CC + 543403) [0x100084aab]
                                                          11 ??? (Adobe Photoshop CC + 9047434) [0x1008a0d8a]
                                                            11 ??? (Adobe Photoshop CC + 539561) [0x100083ba9]
                                                              11 ??? (Adobe Photoshop CC + 23909304) [0x1016cd3b8]
        11 ??? (Adobe Photoshop CC + 24013556) [0x1016e6af4]
          11 ??? (Adobe Photoshop CC + 26858074) [0x10199d25a]
            11 ??? (Adobe Photoshop CC + 26851948) [0x10199ba6c]
              11 ??? (Adobe Photoshop CC + 26855800) [0x10199c978]
                11 ??? (Adobe Photoshop CC + 2771725) [0x1002a4b0d]
        11 ??? (Adobe Photoshop CC + 24013556) [0x1016e6af4]
          11 ??? (Adobe Photoshop CC + 2351757) [0x10023e28d]
         0x100000000 -        0x103bb5f07 com.adobe.Photoshop 14.1.2 (14.1.2.427) <CC99E953-1231-383F-BC67-BCE95BA4E2A7> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
         0x106bf3000 -        0x107282fef com.adobe.PlugPlugOwl 4.0.1.34 (4.0.1.34) <762B5A6D-E532-3EDD-9E8C-6A52F77BF985> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Frameworks/PlugPlugOwl.framework/Versions/A/PlugPlugOwl
         0x10ff7d000 -        0x10ffffff7 MultiProcessor Support <551607FA-AC71-39ED-871E-0F26335ADF89> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/Extensions/MultiProcessor Support.plugin/Contents/MacOS/MultiProcessor Support
         0x116600000 -        0x116848ff7 com.adobe.PSAutomate 13.0 (13.0) <C674EBC3-36AA-368A-B400-0EB597CC8F23> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Required/Plug-Ins/Extensions/ScriptingSupport.plugin/Contents/M acOS/ScriptingSupport
         0x1168cb000 -        0x1168d9fff com.adobe.boost_threads.framework 7.0.0 (7.0.0.0) <C44EEFDE-8A50-303A-8DF6-197E37C34DFC> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Frameworks/boost_threads.framework/Versions/A/boost_threads
         0x118bb8000 -        0x118c19ff7 com.adobe.dvatransport.framework 7.0.0 (7.0.0.0) <0BF14F9A-4525-3A85-8F11-174E23A01D57> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Frameworks/dvatransport.framework/Versions/A/dvatransport
         0x11cfdd000 -        0x11d227fff com.adobe.dvacore.framework 7.0.0 (7.0.0.0) <DE7B7941-89B3-3A19-A7BE-28E9BB2BC2DD> /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Frameworks/dvacore.framework/Versions/A/dvacore
Path:            /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/Frameworks/AdobeCrashReporter.framework/Required/AdobeCrashDaem on.app/Contents/MacOS/AdobeCrashDaemon
Parent:          Adobe Photoshop CC [939]
Responsible:     Adobe Photoshop CC [939]
Responsible:     Adobe Photoshop CC [939]
Not sure if any of this helps...

Minisap install gone all wrong

Similar Messages

Maybe you are looking for