MiniSAP Installatin problem in Microsoft Vista

Hi,
I am trying to load minisap on Microsoft VISTA and i get an error as
"CALCRAM_NT_MSS ColdKeyCheck 2 178
Phase failed.
Error: Main {} 2 178
Installation aborted."
Information:
checking host name lookup for 'goldie'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for 'goldie' is 'goldie'.
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
host 'goldie' has ip address '192.123.1.2'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for '192.123.1.2' is 'goldie.home'.
Please help me in resolving the problem.
bye
chandu

Forget it - it won´t work. The installation kernel 4.6D is VERY old - you even need a special installation CD for Windows 2003 and Vista is newer.
Additionally it comes with SAPDB 7.3 which won´t work under Vista either.
Markus

Similar Messages

  • Having problems with Microsoft Vista

    I just bought a new computer with Vista and every time I try to sync my iPod I get an error message and a box that asks if I want to resolve issues with the iPod F drive. When I hit yes it tells me that it can not find the drive and then does not sync. Any ideas?

    Perhaps you have a drive letter conflict...
    Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear
    http://support.apple.com/kb/TS1493
    Cheers,
    Patrick

  • Hp w2207 monitor flip to vertical flat screen problems with display with Microsoft Vista

    The screen has vertical and horizontal lines that flicker and when I turn on the monitor, I can do boot menu, setup, and other computer check utilities, but when I boot up the Microsoft Vista software the screen goes blank. 
    Have checked the cables and power - are ok.  Audio is fine. 

    It seems like the display settings of the pc are not equal to the requirements of the monitor.
    Can you see the boot menu (bios)?
    Try to boot in safe mode first.
    *** Say 'Thanks' with Kudos ***

  • Photo sync problem with Windows Vista?

    I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
    Thanks,
    Dean.

    I checked out the article and not much help, thanks anyway.
    Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
    If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
    Thanks.

  • Duplex Printing Problem - Word 2007, Vista and HP Officejet Pro L7780

    I'm having trouble with duplex printing on my new HP Officejet Pro L7780, from Word 2007, running on a brand new Vista system.  I've also had this same problem (repeatable) with two other computers, running XP Professional/Word 2003, XP Home/Word 2003.  All of the service packs have been installed for the operating system, word, and printer. 
    If you print a landscape document, using the auto duplex setting for the HP printer, the margins will print out offset by .25 inches, on the left and rigt margins.  So if your margin is 1 inches on right and left, the margins will print to .75 on one side and 1.25 on the other.  This would be annoying, except that I'm trying to print brochures and books, which requires that the pages print out exactly as set up... "close enough" isn't working for me
    The way I have replicated this problem is as follows:  set up a document in landscape format, using the default margins.  Insert an image on page one, size it so it takes the full margin area.  On the second page, fill it up with text.  Print the document, selecting the printer properties and setting Print on Both Sides=Automatic.   The easiest way see the problem is by holding the document up to the light.  The front and back margins should match and they don't.
    Any help you can provide would be very much appreciated.
    Diana

    Diana,
    This problem is perhaps much larger than you might have imagined.  We have tried to work with Hewlett Packard for over two years on the duplex printing problems.  In the process, we have expended over 100 hours of effort in troubleshooting the problem which has included updating software, reinstalling software, developing test documents, escalating issues, submitting technical findings, and in purchasing replacements.  Unfortunately, our efforts to interact with Hewlett Packard excalated support have resulted in an aire of apathy, disinterest, incompetence, frustration, redundancy, occasional discourtesy, and an outright lack of professional decorum - something inconceivable of a large, reputable company.
    We have identified several problems with duplex printing.  The duplex printing problems include irregular margin increases (.25 to .50 inch), margin shifts, cut-off text, compressed text, and compressed graphics.  Please note that most of these problems are only evident when printing documents from computer applications to the printer.  If the user simply uses the front printer panel to copy in duplex mode, these problems are not always evident.  This suggests that the printer mechanics are capable of properly duplexing and that the problem lies in the drivers.
    The problem is evident on the HP OfficeJet Pro L7780, Photosmart L7180, Photosmart C6150, Photosmart 3310, and likely on many, many other HP models.  The problem is evident on many computers (HP, IBM, Toshiba, and Dell), is evident in multiple applicatons (Word, Wordperfect, Excel, Peachtree, Notepad, and many more), and is evident on multiple operating systems (Windows XP Home, Windows XP Professional, Windows XP Media Center Edition, and Microsoft Vista).
    We consider ourselves to be extremely polite, patient individuals, but have nearly been driven to outrage by the indignant disregard offered us by HP's escalation support department; a department which should represent the cream-of-the-crop in both service and technical expertise.  Given the ease with which the problem can be duplicated, we expected an extremely quick resolution by HP who, to our knowledge, has never even made the effort to duplicate the problem in-house on our behalf.
    Ironically, HP highly advertises their J.D. Powers rated technical support, yet it appears that they actually have extremely poor published consumer rankings in some of today's mainstream computer magazines.  HP technical support makes no apologies for the fact the user cannot use a major feature of their printers, offers no indication that the problem is even being addressed, and off-loads the responsibility by suggesting that we contact Microsoft (who is to blame for this issue).
    Thank you, Diane, for your message.  We had a hard time imagining that we were the only one experiencing this problem, especially when HP promotes such a representation.  Which also begs the question why HP plays like the problem does not even exist?  I also fail to understand why HP technical support shows so little interest in a problem that is easily duplicated and adversely affects a major feature of the printer which is commonly used by individuals purchasing equipment for its duplex capabilities.
    This is sad because we have been a loyal customer of HP for over twenty-five years.  There was a time when we would have happily endorsed HP's steller products and steller support (provided you could get a problem escalated).  Now, however, they all-too-often appear to offer equipment that fails to support advertised features which is backed up by sub-standard support and extremely expensive ink.  This is an especially sad commentary for users who are buying HP's upper-end printers and computers.
    We desire to know if there are others out there experiencing similar problems?  If you have experienced these problems or would like samples of the problems we have duplicated, please respond.  I think the more information we gather, the better our chance of a successful resolution to a serious problem.
    Thanks Everyone!

  • How to install Minisap 6.1 in Windows Vista?

    Helo gurus, how are you?
    Before i install windows vista, i need to know if is possible to install minisap 6.1 with windows vista. Anybody did the installation in windows vista? Are there patches for download or other configs to change??
    Anyone asked this before in the forum ( i did not find anything ), so, i am asking now, please help me. Thanks!
    If it is not possible, please, answer about others versions of minisap.
    4:08 PM
    Message was edited by:
            Rodrigo Paisante

    I've tried to install Minisap on Vista & get the following error when triggering "Start SAP ABAP Engine":
                  ERROR_ACCESS_DENIED: Access is denied.  [shmnt.c      2055]
    [Thr 980] *** ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      469]
    [Thr 980] *** ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
    If anyone knows how to fix this problem, please let me know!!!
    [email protected]
    (South Africa)

  • When downloading 10.5.2 version of itunes to Microsoft Vista 32 bit it gets to 68% downloaded and hangs then eventuall times out.  No error msg given.  What is it waiting for?

    When downloading 10.5.2 version of itunes to Microsoft Vista 32 bit it gets to 68% downloaded and hangs then eventuall times out.  No error msg given.  What is it waiting for?

    Finally got it working, I had to delete two solitary files in an iTunes folder.
    C:\ProgramData\Apple Computer\iTunes\SC Info
    Delete the only two files that are in this folder. Please note that it is a hidden folder.
    After they have been deleted, iTunes should work (it did for me)
    This may not work if your iTunes.exe process (viewable with task manager) turns off after the license agreement. I solved that problem by updating quicktime.
    iTunes 10.5.2 doesn't update quicktime like all the previous installers did.

  • Which Microsoft Vista program do I use?

    hello, I trying to get AutoCAD 2010 onto my computer. I know I need Microsoft Vista but I unsure which one to install. I want to get it from my school since it cheaper. There six different types listed and I am completely lost. Wonder is any knew the answer to this? or has had to do this? Also will it cause problems on my computer since I would be downloading AutoCAD 2010 student version. Has anyone done this yet?

    In as much as you will be using Boot Camp to set up the partition for Windows stop down to the Boot Camp forum area and query those gurus:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Microsoft vista OEM Test Case-5 failing for java application

    The launcher exe for my application is built in C++ that load the jvm and then the control is passed to the java class through JNI.
    My problem is that my application exe is not passing the Microsoft Vista OEM Ready Test Case Number- 5 which specifies
    Application Verifier Checks:
    Tests for app failures from common coding errors: exceptions, handles, heaps, locks, memory, thread local storage.      
    App failures, crashes, and hangs are some of the top negative factors for customers. Eliminating such failures improves app stability and responsiveness.App verifier catches common coding errors and prevents heap corruption, the cause of more than 15% of application failures.
    Interestingly..! Even a simple Hello World program is failing this test...!

    Open [http://msdn.microsoft.com/en-us/windows/cc721647.aspx] and search for the word "Java".

  • Hello. On my Macbook air late 2013 model I am having a problem where microsoft word for mac just stops working for soon reason and at the screen where the document should be is just gray and does not even display the document. Does anybody have a fix?

    Hello. On my MacBook Air late 2013 model I am having a problem with Microsoft office word for Mac where the window for the document becomes all gray and I can not see anything that I have typed or any menus for it and also windows will sometimes dissapear and I am having truble getting them back. If anyone has anyideas of what is going on or could even help me thank you.

    Glad that helped.
    As time goes by (months or years), keep your eyes on how long Microsoft continues to support Office 2011 for Mac.  Eventually you should consider Office 365 or Apple's Pages, Numbers, and Keynote.

  • Issues with Microsoft Vista and Crystal Report XI R2 with SP2

    Hi,
    I have an application which works fine on XP but fails to work on Vista. When I go to view a report I get the following error:
    "The request could not be submitted for background processing."
    I have searched a great deal but most solutions to this problem affect other versions or are for different reasons (ie. also do not work on XP). My report viewer works as expected on XP, but not on Vista.
    I have installed SP2 for CRXI R2 which should enable compatibility with Vista. I am using Visual Studio 2005.
    Anyone have any ideas or come across Vista problems?
    MS Vista Business, joined to a domain. 1.7gig. 512 ram. Test machine.
    Thanks in advance,
    Jon.

    The "...background processing..." error can occur for many different reasons, but usually, it's is related to some kind of database connectivity.  Are you reports based on ADO.NET?  If so, make sure that the data being returned in your ADO.NET object machines the schema used to design the report. 
    The best way I troubleshoot these types of issues is to simply the app/report.  So create a really simple Windows app that loads your reports and has only the necessary code to run your report.  And then copy your test app and report to the machine and see if it throws the same error.  This would test if it's an environmental issue (ie: runtime files) or if it's something with the logic of your application.
    Also, if it's possible, try running the report from the CR Designer on the Vista machine to see if it can run from the designer itself.  Of course this means you'll need to install CR if you don't already have it.
    Hopefully this puts you in the right direction.
    -MJ

  • Installation problem: IIS 7, Vista 64 Bit

    Hi all!
    I tried to install EPM 11.1.1.1 on my laptop (Vista Business, 64 Bit) and have a problem with the installation of HFM Web Application and other components of EPM 11.1.1.1, witch needs IIS.
    After I've got the error "Products needs IIS to be installed" for the first time, I installed IIS 7.
    Now the IIS is running - I hope (However I'm able to open the standard web site http://localhost/), but I'm still getting the same error.
    How can I check, if IIS is running?
    Could someone tell me, what I maybe forgot or what I have to consider? Do I have to make some IIS settings? I already allowed all isapi and cgi extensions.
    Could Vista or the 64-Bit system version be the source of my problem? Why HFM does not recognize the installed IIS7?
    Do someone have any ideas?
    Thanks in advance!
    Alex
    Edited by: alta on 02.12.2008 10:51

    Most people are going to tell you to use a supported Operating System. If this is a production installation then install a supported OS -- I'm presuming this is not a production or multi-user system and iis a personal development system.
    This post seems to have an answer to one of the main problems with a Vista install - Re: EPM System 11.1.1: OpenLDAP & WIndows Vista Issue
    You may encounter issues with Performance Management Architect and IIS7 and those are likely much more difficult if not impossible to resolve -- if you want to use classic applications then just select apache when you deploy Workspace and do not install Performance Management Architect.
    Let us know how it goes.
    Regards,
    -John
    Edited by: Jbooth on May 13, 2009 8:54 PM

  • ITunes / Quicktime Video Problems With Windows VISTA

    I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
    Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
    The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
    Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
    So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
    I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
    Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
    PC Pentium 4   Other OS   Windows Vista Home Premium

    I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
    I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Installing and Running Oracle 10g Express Edition on Microsoft Vista

    My computer is running on Microsoft Vista.
    I downloaded Oracle 10g Express Edition for Vista.
    I ran the setup.exe. Everything went well there.
    But, when I open the SQLPlus program, a window prompts me to enter my username, password and host string.
    Can someone please tell me what it is expecting for these fields? I am using the same username and password I used to create my Oracle account.
    But what is the host string?
    Appreciate it.
    Thanks.

    This may help
    http://sites.google.com/site/delphibasics/home/delphibasicsarticles/installingoracledatabase10gexpresseditiononwindowsvista
    Check out the section "Access demonstration data"
    Also this is not the best place to post a question of this nature. This might be better :
    Database Installation
    Best Regards
    mseberg

Maybe you are looking for