MiniWAS 6.20 AND SneakPreview 6.40 on one System
Hi,
is it possible to install both MiniWAS 6.20 AND SneakPreview 6.40 on one System ?
In the SneakPreview 6.40 help-File is says:
"If you have installed a previous version of SAP Web Application Server, you have to remove it prior to installing this edition."
I just installed miniwas 6.20 and dont want to crash it by installing sneak preview.
Any comments ?
elko
I shut down all database services (as I used a win2000 system), renamed the sapdb root directory and started a new sapdb installation with the installer from the WAS 6.40 Sneak Preview DVD. Finally you have to change the configuration settings (database id etc.).
Since I am quite new to SAP I cannot estimate if the change succeeded.
However, there might be an easy way to match your requirement:
The WAS 6.40 CeBIT distribution is available for download:
ftp://ftp.sap.com/pub/linuxlab/test_drive/
It contains both ABAP and J2EE stack on a single system. It is reported that an installation succeeds without any problems on a suse linux entreprise server. Since I am waiting for those WAS CD's I cannot give more advice now. Recent linux distributions are reported to fail. Maybe it depends on the kernel. Do not use 2.6 kernels.
Similar Messages
-
XI and R/3 Installation on One System
Hi,
I am new To XI and I want to install XI and R/3 in My Local System. Can i install both in one system (OS)? If yes, what is the minimum requirement for this?
If any one have did this, please help me.
Thanks,
SridharHi Sridhar,
Download this Doc and Fallow...
http://help.sap.com/bp_scmv150/documentation/SCM50_system_reqs.doc
Fallow the below documentation...
System Requirements for
SAP Best Practices for SCM 5.0 Scenarios
Use
The objective of this document is to help system administrators to prepare an SAP SCM system for the installation of one or more SAP Best Practices scenarios and to ensure the system setup meets the requirements for the installation.
This document does not provide information on how to set up the entire SAP SCM system, itself, but provides you with useful additional information and troubleshooting tips.
System Landscape
To install one or more of the SAP Best Practices for SCM scenarios from this CD, you should refer to the system landscape described below and compare it with your own existing system landscape as an installation prerequisite.
Please note that the support package levels indicate the minimum support package level your system landscape should have. If higher support packages exist, we recommend that you install the highest available support package.
To install and use any SAP Best Practices scenario, you must have installed an SAP R/3 and an SAP SCM system.
SCM 5.0: Complete Version
SAP SCM 5.0 contains the following business application components on one system platform:
SAP APO 5.0
SAP EM 5.0
SAP ICH 5.0
The following table provides an overview of the software component details of the SAP SCM system:
Software Component Release Level Highest Support Package Short description of Software Component
SAP_BASIS 700 0007 SAPKB70007 SAP Basis Component
SAP_ABA 700 0007 SAPKA70007 Cross-Application Component
ST-PI 2005_1_700 0001 SAPKITLQI1 SAP Solution Tools Plug-In
PI_BASIS 2005_1_700 0007 SAPKIPYI77 Basis Plug-In (PI_BASIS) 2005_1_700
SAP_BW 700 0007 SAPKW70007 SAP NetWeaver BI 7.0
SAP_AP 700 0004 SAPKNA7004 SAP Application Platform 7.00
LCAPPS 2005_700 0002 SAPKIBHD02 LCAPPS 2005_700 : Add-On Installation
EA-IPPE 400 0003 SAPKGPID03 SAP iPPE (EA-IPPE) 400
SCM 500 0004 SAPKY50004 Supply Chain Management 5.0
SCM_BASIS 500 0004 SAPK-50004INSCMBASIS SCM Basis 5.0
QIE 200 0004 SAPK-20004INQIE Quality Inspection Engine 2.00
BI_CONT 702 0002 SAPKIBIHP2 Business Intelligence Content
Optimization Server Version:
Identifier Version
CTM01 5.0_REL SP04, 356375
DPS01 5.0_REL SP04, 356375
CS01 5.0_REL SP04, 356375
SEQ01 5.0_REL SP04, 356375
SNP01 5.0_REL SP04, 356375
VSR01 5.0_REL SP04, 356375
Live Cache SP05 (LCA50.05, LC 7.6.00.22)
LiveCache version: KERNEL 7.6.00 Build 022-123-119-055
DBM server version: DBMServer 7.6.00 Build 022-123-119-055
Operating system: SunOS
LCA version: Module 50 Build 05
SAP APO GUI
We recommend that you install the SAP APO specific SAPGUI add-on, which is required for certain business transactions.
SAP ECC System
SAP ECC Enterprise with Extension Set 1 (for the SAP Best Practices scenario Fulfillment Visibility we used an SAP R/3 Enterprise system with Extension Set 2)
Software Component Release Level Highest Support Package Short description of Software Component
SAP_ABA 700 0007 SAPKA70007 Cross-Application Component
SAP_BASIS 700 0007 SAPKB70007 SAP Basis Component
ST-PI 2005_1_700 0001 SAPKITLQI1 SAP Solution Tools Plug-In
PI_BASIS 2005_1_700 0007 SAPKIPYJ77 PI_BASIS 2005_1_700
SAP_AP 700 0004 SAPKNA7004 SAP Application Platform
SAP_APPL 600 0004 SAPKH60004 Logistics and Accounting
EA-IPPE 400 0004 SAPKGPID04 SAP iPPE
EA-APPL 600 0004 SAPKGPAD04 SAP R/3 Enterprise Add-On PLM, SCM, Financials
FINBASIS 600 0004 SAPK-60004INFINBASIS Fin. Basis
BP-ERP05 600V2 0000 SAP Best Practices All-in-One based on ERP 2005 (ECC 600)
SAP XI System
If you want to install the SAP Best Practices scenario Supplier Managed Inventory, Release Processing, Responsive Replenishment, Contract Manufacturing Procurement & Supply Network Inventory, Kanban-based Replenishment, you also need to implement an SAP XI system.
Software Component / PI Content Release Level Highest Support Package Short description of Software Component / PI Content
SAP_BASIS 700 0007 SAPKB70007 SAP Basis Component
Content for SAP BASIS 700 0007 XI content for SAP BASIS 7.0
Content for SCM 500 0004 XI content for SCM 5.0
Content for SCM BASIS 500 0004 XI content for SCM BASIS 5.0
Non-ABAP components, such as the Integration Builder and the Integration Repository, must also be installed and have the respective support package levels.
For uploading the content in the XI System, refer to SAP note 836200.
Checklist after the System Setup
SCM Menu
After you have installed the SCM System, you may have to set up the menu that you want to use.
To do this, access transaction SE38 and run the report /SCMB/SM_VERS.
Choose Full Version and then, choose Execute.
Check Planning Version 000
In your SAP SCM system, use the following path:
SAP Menu  Advanced Planning and Optimization  Master Data  Planning Version Management  Model and Version Management
Make sure that the planning version 000 Active Version is available.
If this planning version is not available, this means that the LiveCache has not been initialized. Proceed with the LiveCache initialization before you start with the installation of any SAP Best Practices scenario.
Check that PSE services have been activated
Use transaction strust in your SCM system. All services should have a green light. If it is red, activate all of them. There is no need to reboot the system afterwards.
OPTIMIZER
1. Checking that the Optimizer has been installed
Transaction SM59  RFC Destination  OPTSERVER_CTM01  Test Connection
If the connection cannot be established, this may be due to the following reasons:
the Optimizer has not been installed
an error occurred during the installation of the Optimizer
2. Checking that the Optimizer SPs have been installed
Open transaction /SAPAPO/OPT09. The Optimizer Support Packages should be identical to the Support Packages of the SCM system.
Ensuring that the APO relevant PI Settings are activated in SAP ECC
You have to make sure that the business transaction events are active in the SAP ECC system. Only if these events are active for the SAP APO integration, will changes to the transaction data be transferred from the SAP ECC system to the SAP APO system. This setting should have already been performed; this is just a reminder in order to avoid possible problems later on. Use the following procedure:
In your SAP ECC system, open the transaction BF11.
Confirm the message The table is cross client.
On the Change View: Application Indicator: Overview screen, check that the applications ND-APO, PI-EM and NDI are active, i.e. selected. If they are inactive, select the check box to activate them.
Choose Save and go back.
Web Communication Layer (WCL)
Ensure that the WCL is installed correctly: Usually the WCL should be connected to the client 001 of the SCM system. Use transaction /saptrx/wcl_search in the SCM system to open the WCL. If a logon pop-up appears, then the WCL is set up correctly. If the message WCL is not installed... appears, the respective set up settings should be checked and corrected, if necessary.
Additional Information
For additional information on issues such as architecture, sizing, platforms, and upgrades, refer to following page on the Service Marketplace:
alias /SCM  SCM Technology
For information on system monitoring, system administration, volume testing etc., check SAP note 572003. You can also refer to the Service Marketplace, using the alias /SCM  SCM Technology  Table of Contents  Solution Management  Best Practices for mySAP SCM Solution Management.
Thanks,
Satya Kumar.. -
SCM and CRM Multiple Clients in one system
Dear all,
I want to ask a question regarding Multiple clients in SCM 5 - IDES and CRM 5 -IDES.
I installed the system and plan to have multiple clients in a system with copying client 800 (IDES) to others.
I heard opinion that it can't possibly be done because if during the exercise the Administrator Workbench is executed it will search to the source client (800) and probably affect the exercise.
Would you mind giving me more suggestion about this?
Thank you.
FaustoHi Fausto,
Could you be more specific about what you need to achive?
You can always creat a new client, logon to the client and do a client copy with TCod SCCL.
If you logon to other IDES clients then You'ld overwrite the content of the client which have been pre-configured.
Check the status of the client you need to overwrite from TCod scc4.
Also to verfiy the status of the target client for TCod se06 -system change option.
Regards,
Tolulope -
Installing NW CE7.1 and EP 7.0 on one machine
Hello All,
i have a question i am trying to install NW CE 7.1 and NW EP 7.0 on one windows 2003 ser machine but both are with different DBs EP with MSSQL 2005 server and CE with SAPDB. EP is based upon JDK 1.4 while NW CE 7.1 is based upon JDK 1.5. I didnt installed JDK 1.5 seperatley but i think its allready included in the package of nW CE 7.1. So installed for NW CE finished successfully (i had EP allready installed).
i am facing few probelms
1. I am not able to start diagonosis agent successfully it stays in yellow color forever. please find the snapshot of trace file at end of message.
2. I dont know the default port which will be used to access NW CE as my EP is allready installed on the
default port 50000. Can i know the default port used to access NW CE i allready tried 50001, 50002 and 50003. My EP is still working fine on 50000 port. Or does CE functionality going to be included into existing port 50000.
3. Is it even possible to install CE 7.1 and EP 7.0 on one system with different back-ends?
4. Do i need to install JDK 1.5 before starting CE 7.1 installation or its allready included?
any help will be highly appreciated.
trace file
F ********************************************************************************
F [Thr 1788] *** LOG => Instance state is "Starting the processes" (STARTING @ 0, INACTIVE).
F [Thr 1788] *** LOG => Starting nodes: runlevel 3.
F ********************************************************************************
F Starting process: C:\usr\sap\DT1\SMDA97\exe\jstart.EXE
F arg[ 1] = -nodeId=0
F arg[ 2] = pf=C:\usr\sap\DT1\SYS\profile\DT1_SMDA97_saptwo
F arg[ 3] = -hostvm
F arg[ 4] = -nodeName=smdagent
F arg[ 5] = -file=C:\usr\sap\DT1\SMDA97\SMDAgent\smdagent.properties
F arg[ 6] = -jvmFile=C:\usr\sap\DT1\SMDA97\work\jstart.jvm
F arg[ 7] = -traceFile=C:\usr\sap\DT1\SMDA97\work\dev_smdagent
F arg[ 8] = -javaOutFile=C:\usr\sap\DT1\SMDA97\work\jvm_smdagent.out
F exePath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F libPath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin\server;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin;C:\usr\sap\DT1\SMDA97\j2ee\os_libs;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F stdout : C:\usr\sap\DT1\SMDA97\work\std_smdagent.out
F stderr : C:\usr\sap\DT1\SMDA97\work\std_smdagent.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process SMDAgent started with pid 5860
F ********************************************************************************
F [Thr 1788] *** LOG => Process smdagent started (pid 5860).
F
F [Thr 1788] Mon May 31 22:32:06 2010
F [Thr 1788] *** LOG => Process smdagent running (pid 5860).
F [Thr 1788] *** LOG => Instance state is "All processes running" (RUNNING @ 1, ACTIVE).
F [Thr 1788] *** LOG => Process smdagent stopping (pid 5860).
F [Thr 1788] *** LOG => Instance state is "Some processes running" (RUNNING @ 0, INACTIVE).
F
F [Thr 6068] Mon May 31 22:32:06 2010
F [Thr 6068] *** LOG => Signal 13 SIGCHLD.
F [Thr 1788] *** LOG => Process smdagent stopped (pid 5860).
F [Thr 1788] *** WARNING => Node smdagent failed: result 2, exit code -11112. [sfxxnode.hpp 1005]
F ********************************************************************************
F Java process [collector] properties:
F section name : collector
F config file : C:\usr\sap\DT1\SMDA97\exe\startup.properties
F node name : collector
F home directory : C:\usr\sap\DT1\SMDA97/j2ee
F shutdown timeout : 136000 ms
F exit timeout : 7000 ms
F debuggable : false
F debugger active : false
F ********************************************************************************
F ********************************************************************************
F Starting process: C:\usr\sap\DT1\SMDA97\exe\jstart.EXE
F arg[ 1] = -nodeId=1000
F arg[ 2] = pf=C:\usr\sap\DT1\SYS\profile\DT1_SMDA97_saptwo
F arg[ 3] = -DSAPINFO=DT1_97_collector
F arg[ 4] = -hostvm
F arg[ 5] = -nodeName=collector
F arg[ 6] = -file=C:\usr\sap\DT1\SMDA97\exe\startup.properties
F arg[ 7] = -jvmFile=C:\usr\sap\DT1\SMDA97\work\jstart.jvm
F arg[ 8] = -traceFile=C:\usr\sap\DT1\SMDA97\work\dev_collector
F arg[ 9] = -javaOutFile=C:\usr\sap\DT1\SMDA97\work\jvm_collector.out
F arg[10] = -clusterId=smdagent
F arg[11] = -exitcode
F arg[12] = -11112
F exePath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F libPath : PATH=C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin\server;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\jre\bin;C:\usr\sap\DT1\SMDA97\j2ee\os_libs;C:\usr\sap\DT1\SMDA97\exe\sapjvm_5\bin;C:\usr\sap\DT1\SMDA97\exe;C:\sapdb\programs\bin;C:\sapdb\programs\pgm;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn;C:\Program Files (x86)\Microsoft SQL Server\90\DTS\Binn;C:\Program Files (x86)\Microsoft SQL Server\90\Tools\Binn\VSShell\Common7\IDE;c:\Program Files\Microsoft SQL Server\90\DTS\Binn
F stdout : C:\usr\sap\DT1\SMDA97\work\std_collector.out
F stderr : C:\usr\sap\DT1\SMDA97\work\std_collector.out
F console : no
F debugger: no
F nice : no
F ********************************************************************************
F Process collector started with pid 3212
F ********************************************************************************
F [Thr 1788] *** LOG => Process collector started (pid 3212).
F
F [Thr 2352] Mon May 31 22:32:07 2010
F [Thr 2352] *** WARNING => process collector (pid 3212) died (exit code 2). [sfntlib.hpp 830]
F [Thr 2352] *** LOG => Signal 13 SIGCHLD.
F
F [Thr 1788] Mon May 31 22:32:07 2010
F [Thr 1788] *** LOG => Process collector died (pid 3212).
thanks
Manii am able to start it, so question 2,3 and 4 vanishes
For question 2 is the port number builds as 5instance number00 e.g if Java EE server instance is 02 then port assigned is 50200. i think its possible to install both and JDK 1.5 is allready included in the SAP CDs.
but i am still not able to start Solution Manager Diagonostic Agent my first question.
Thanks
Mani -
i forgot the administrator password for my mac and cant set a new one without it how can i set a new one
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/ -
Can I use my creative cloud products on more them one system at a time (Mac and PC)
Can I use my creative cloud products on more them one system at a time (Mac and PC)
I want to use the premiere on my Mac and some times on my PC.
Can I use it on other operating systems with one membership or do I have to purchase an other membership for my other system. I am only working on one system or the other at one time.
Thxhttp://www.adobe.com/au/products/creativecloud/faq.html
Are there any unique benefits that come with my paid membership?
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information. -
Creation of Add-on package for 64 bit and 32 bit SAP Business One Client
Please help me creating package for 64 bit and 32 bit SAP Business One. If Add-on executable is compiled with x86 option then there is no issue of connecting Add-on with 32 bit SAP Business one and if Add-on executable is compiled with Any CPU option then there is no issue of connecting Add-on with 64 bit SAP Business one. Problems are mentioned as below
1. My Add-on uses MS ACCESS connection and the connection is read using Jet OLEDB 4.0 provider. It works fine for x86 compile mode but not when compile mode is Any CPU. I searched for the issue on Google and found a solution to change MS ACCESS connection provider to ACE.OLEDB.12.0 but again ACE provider is installed according to the Office version i.e. 32 bit or 64 bit office suite. If I install 32 bit ACE provider then Add-on executable compiled with x86 version is working fine but with Any CPU option throws error as provider is not registered on current machine.
2. Secodly, our license validation activex dll is build using vb 6.0 and therefore when Add-on executable is compiled using Any CPU option, Add-on EXE cannot read from license dll. Any suggestion, how the activeX dll can be compiled whose component can be created from for X86 compiled exe and any cpu compiled exe.
Please help because we are stuck in this issue and cannot move forward.
Thanks.Hi Alejandro,
That is one solution but did your add on used ms access connection? if you used Jet oledb to connection string or ace oledb connection string? what if 32 bit office is installed and what if 64 office is installed? how did you found the office version in install script? after determining the office version how did you installed Microsoft redistributable for ace oledb (32 bit or 64 bi )?
I am sorry that I asked many questions but these are the problems where I am stuck with the addon installer?
Thanks -
I am a Creative Cloud Member and have the Membership for one Year but in one month it syays expired
I am a Creative Cloud Member and have the Membership for one Year. It has been only one Month and the Plan says expired. I am not sure what has happened but I am unable to find any Customer Care Number of Adobe. Can anyone please help. Its Urgent. I use MAC.
Moving this discussion to the Adobe Creative Cloud forum.
Abhishek_zico you should be able to contact our support team at Contact Customer Care. You will want to work directly with our support team regarding the status of your subscription. -
Can I return my iphone and get a brand new one right after?
Within the 14 day full return policy, can i return my iphone on the last day and get a brand new one?
We aren't going to give you a pat on the back and say "good job". It's your time. I couldn't care less to be honest.
-
My computer died and I have a new one. How do i Authorize my new computer to synch the content of my iPod?
Authorization
iTunes Store- Authorize or deauthorize your Mac or PC.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7. -
how do I delete photo ALBUMS from my iPHONE 4?
I sync via icloud and I can not see any folders selected in itunes.
I searched the internet and basically there is no one who has the answer (so far)
to how you delete the iphone photo library and misc albums
I have also had every iphone and I am not stupid.
charles altmanReplying to my own post - heh. I downloaded iExplorer (http://www.macroplant.com/iexplorer/) which allowed me access to the files on the phone and there was the phantom movie in the DCIM folder. Deleted it, and all is well - although I still have 0.65gb of Other in iTunes.....
-
I have an ipad and just bought a second one for my daughter and she wants all my music on her ipad. All the music is under my itunes account yet she has her own itunes account so she can have her own apps and purchase apps with gift cards (She's only 9)
I subscibe to music match under my account but it wont let me put my music on her ipad under hers or even my itunes account. I get some sort of 90 day error message. How do i get around this so I can let her have my music on her ipad?iTunes Match is not sharable across Apple IDs. The best way to get the music on her iPad is to leave hers signed into her Apple ID on the iTunes Store and sync via USB.
-
I want to change the security settings on my e-mail. I provided a password once and now it opens without one. I want to keep my messages private.
== This happened ==
Every time Firefox opened
== When I updated.Websites remembering you and automatically log you in is stored in a cookie
Tools > Options > Privacy > Cookies: "Show Cookies"
See also [[Cookies]] -
Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]] -
Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.
stop the download if it's stalled, and restart your download.
Maybe you are looking for
-
Error Message - Can't open PDFs
Everytime I try to open Adobe Reader or a PDF, I get an error message saying that Adobe Reader can't open in Protected Mode due to an incompatibility with my system. It offers me the option to open with Protected Mode disabled, but when I choose that
-
New Menu Item entry in Standard Help Menu
Hi experts, I have added a custom menu item under the standard Help menu of SAP using SE41 (Menu Painter) with pragram name: MENUSYST and status: MEN I added the new entry and gave it a function code and activated the function code as well as the int
-
I have been syncing video and audio into a sequence and using those sequences in a new master sequence. Is that the right way to do it? Is there a way to have the video and audio in a useable clip? I could not find this information in the manual, but
-
This should be a piece of cake for some of you out there, but at times I have no control over my cursor. On its own it will run into a corner of the screen, not any one particular corner, they've all been involved. Other times it will shoot to the si
-
Hi all: I just set up 10 vlan interface and 10 AP groups for each vlan by only One SSID. But it's didn't work for me.All the client cannot get IP and even prompt a wep key enter . I set up something as below : 1.set up AP group and assign vlan interf