Minor Gotcha When Moving up to ACR 6.1
I really like the new Enable Lens Profile Corrections feature of ACR 6.1.
However, there's a minor gotcha for those of us who have been using some of the manual corrections in the past: Once you enable the automatic profile-based Lens Correction facilities, it's enabled for ALL images, and any prior corrections stored per-image add to whatever existing corrections you may have used before on an image. You might end up with overcorrection, for example, of Chromatic Aberration.
You can see it happen in this scenario:
1. When running a version of ACR prior to 6.1 you have opened a raw file. You dialed-in some Chromatic Aberration correction manually.
2. Upon opening the image, ACR remembers the settings you used, including manual Lens Correction values, so you can start there if you should open the image again.
3. You upgrade to 6.1.
4. You check the [ ] Enable Lens Profile Corrections, and Save New Camera Raw Defaults.
5. You open the same raw file you previously opened in step 1.
6. Now a correction for Chromatic Aberration (among other things) is applied due to the Automatic Lens Correction, yet you still have the same manual correction you dialed-in before, resulting in a double correction.
If you notice the problem, usually the proper action is to move the sliders for manual corrections back to 0 (assuming the profile is good).
The [ ] Enable Lens Profile Corrections setting is not stored per image, but appears to be global.
I'm not saying this is a bug, but just something to keep in mind when opening images you have opened before.
-Noel
Thanks for the response, Eric. And thanks, Curt, for letting me know editing of initial posts is possible. I'll look for that link in the next thread I start.
Doesn't having the profile-based corrections apply globally kind of fly in the face of ACR's general strategy - that of remembering everything on a per-image basis? It seems that having that checkbox enabled in the Camera Raw Defaults plus leaving it disabled in any image that's already been opened would solve the problem nicely.
I suppose I could just clear out my settings database... Chances are settings chosen in the past are starting to get stale anyway, given all the new capabilities in the software. I like not having to correct the CA my favorite lens makes any more by default.
-Noel
Similar Messages
-
As title says, when I open Photoshop CS6 and simple make a new layer and either use the type tool, it appears to be a little Sluggish/Jerky when moving the layer around.. The same applies when resizing photoshop itself.
I'm updated to the latest version of CS6 and have tried all the combinations in the 'Performance' section of Photoshop.
My Macbook Pro Retina is the 3.4ghz 650m and 8GB RAM offering (OS Mavericks). It's really annoying me as even my old laptop could run it smoothly and that was an i5 and much lower-end graphics card.
The only way I can really describe it (and i'm no tech professional) is when comparing it to silky smooth 60 fps, it looks like it's skipping frames and in term looking 'jerky'. I also use Illustrator and don't really witness the same problem with it.
I know this may have been asked quite a bit.. But I've never found the solution.. Could anybody advise me on what it potentially could be down too? (Might I add the laptop has just had a fresh install of the OS and a fresh copy of CS6)You could check through the GPU FAQ for anything you might have missed
http://helpx.adobe.com/photoshop/kb/photoshop-cs6-gpu-faq.html
You say you have tried all settings in Performance, but I wonder what your cache levels are set at? If more than 1, then OK.
There's the general performance FAQ (no doubt lots of overlap)
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
Is this with all image docs, or particular ones? For instance I have been playing with using ACR to process 32bit HDR files, and it puts a huge load on the system. -
RAW images change to Jpegs when moved
When I move a folder of Raw files from iPhoto to Canon Image Browser or to a folder in Finder, they change to Jpegs. Is there a way to keep them as Raw CR2 Files when moved. Thanks for any help
No they don't. However it sounds like you're accessing the Jpeg previews that iphoto creates on import. So, how are you trying to "move a folder" of images? There are a couple of ways, depending on what you are trying to do.
Processing Raw in iPhoto
When you import a Raw to iPhoto it automatically makes a jpeg Preview of the shot. Why? Because you can't do anything with Raw - can't print it, share it online, use it in other apps etc. So to allow you to use the file immediately the Preview is available.
You can, however, also process the Raw in iPhoto simply by editing it. The Raw processing engine in iPhoto the same one used in Aperture, but with less fine control. (Think of the differences between Word and TextEdit, iMovie and Final Cut). The output from the processing then replaces the preview. You can choose to save your output as either jpeg or tiff in the iPhoto Preferences.
When you are processing Raw in iPhoto you will see the Raw badge on the bottom of the iPhoto Window
Uploaded with plasq's Skitch!
Note: After you have processed a Raw, subsequent edits to the photo are carried out on the processed jpeg (or tiff) not the Raw. If you want to go back to the original then you need to use the Photos -> Reprocess Raw command.
Processing Raw in a 3rd Party Application
You can also process your Raw with a 3rd Party app like ACR or Photoshop. *But* iPhoto does not handle this gracefully and it's a bit of a kludge.
First off set your preferred app as an external editor in iPhoto:
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Note that iPhoto sends a copy+ of the file to Photoshop, so when you save be sure to use the Save command, not Save As... If you use Save As then you're creating a new file and iPhoto has no way of knowing about this new file. iPhoto is preserving your original anyway.
Next: In the iPhoto Preferences -> Advanced, elect to use Raw with your External editor:
Uploaded with plasq's Skitch!
Now when you go to edit the Raw it will be sent to your external editor.
Now for the kludge:
You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you *must save it to the desktop and then import it back to iPhoto as a new file*.
This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.
ANd, you can always access the Raws simply by exporting with the Kind set to Original -
Authenication needed when moving or saving files to a folder
I've been online searching but can't find a resolution to disabling having to authenticate when moving or saving files to any folder.
I read something about using Terminal and tried the suggestion which was typing in
sudo chawn -R yourshortname . Then putting in my password when prompted. It either will not type my password or not accept it.
Can anyone help? ThanksYou can't disable or correct it with that command. See http://discussions.apple.com/thread.jspa?threadID=1216618 for more information.
-
Mid 2010 macbook pro freezes and restarts when moved.
My macbook pro crashes daily and sometimes I have to keep turning it on for about 5 minutes because it doesn't start up it just beeps. once it starts up it tends to crash when moved even slightly. I have the crash reports and I'm hoping someone can help me. This problem started to occur once I upgraded to mountain lion and I dont know if the problem has to do something with mountain lion or if it's just coincidence. I searched around on the web and think that maybe it is my logic board. Thank you in advance.
9/9/12
Sun Sep 9 21:43:33 2012
panic(cpu 1 caller 0xffffff800e2b7b95): Kernel trap at 0xffffff800e22e55f, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff80af934030, CR3: 0x00000000354c0000, CR4: 0x0000000000000660
RAX: 0xffffff80af934000, RBX: 0xffffff8022e0c550, RCX: 0xffffff80f6b4bf80, RDX: 0xffffff800e22e9d0
RSP: 0xffffff80f5fe38f0, RBP: 0xffffff80f5fe3960, RSI: 0xffffff80f6b48000, RDI: 0xffffff8022e0c550
R8: 0xffffff802453b550, R9: 0x7ffffffffffffffe, R10: 0xffffff8022e02148, R11: 0x0000000000000246
R12: 0xffffff80ef934000, R13: 0x0000000000000000, R14: 0xffffff802453b550, R15: 0x0000000000000000
RFL: 0x0000000000010086, RIP: 0xffffff800e22e55f, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff80af934030, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80f5fe3590 : 0xffffff800e21d5f6
0xffffff80f5fe3600 : 0xffffff800e2b7b95
0xffffff80f5fe37d0 : 0xffffff800e2ce4ad
0xffffff80f5fe37f0 : 0xffffff800e22e55f
0xffffff80f5fe3960 : 0xffffff800e22d9dc
0xffffff80f5fe39a0 : 0xffffff800e21b67d
0xffffff80f5fe39e0 : 0xffffff800e2b74ba
0xffffff80f5fe3bb0 : 0xffffff800e2ce4ad
0xffffff80f5fe3bd0 : 0xffffff800e2b1d93
0xffffff80f5fe3ce0 : 0xffffff800e22e519
0xffffff80f5fe3d60 : 0xffffff800e22d9dc
0xffffff80f5fe3da0 : 0xffffff800e54f15b
0xffffff80f5fe3e10 : 0xffffff800e54e78b
0xffffff80f5fe3f20 : 0xffffff800e54e344
0xffffff80f5fe3f50 : 0xffffff800e5e17da
0xffffff80f5fe3fb0 : 0xffffff800e2cecf3
BSD process name corresponding to current thread: Safari
Mac OS version:
12B19
Kernel version:
Darwin Kernel Version 12.1.0: Tue Aug 14 13:29:55 PDT 2012; root:xnu-2050.9.2~1/RELEASE_X86_64
Kernel UUID: 3005059E-270B-3B9F-940D-7A66C05DDC9D
Kernel slide: 0x000000000e000000
Kernel text base: 0xffffff800e200000
System model name: MacBookPro7,1 (Mac-F222BEC8)
System uptime in nanoseconds: 820893131544
last loaded kext at 25461220751: com.apple.driver.AudioAUUC 1.60 (addr 0xffffff7f8f91a000, size 28672)
last unloaded kext at 256013252037: com.apple.driver.AppleMCP89RootPortPM 1.11 (addr 0xffffff7f8e9fe000, size 24576)
loaded kexts:
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.9f8
com.apple.driver.AGPM 100.12.69
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.driver.AppleHDA 2.3.0f2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMikeyDriver 2.3.0f2
com.apple.driver.AppleBacklight 170.2.3
com.apple.GeForce 8.0.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleSMCLMU 2.0.2d0
com.apple.driver.ApplePolicyControl 3.2.6
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleUSBTCButtons 235.4
com.apple.driver.AppleIRController 320.15
com.apple.iokit.SCSITaskUserClient 3.5.1
com.apple.driver.AppleUSBCardReader 3.1.0
com.apple.driver.AppleUSBTCKeyboard 235.4
com.apple.driver.XsanFilter 404
com.apple.BootCache 34
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.iokit.IOAHCIBlockStorage 2.2.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.driver.AppleFWOHCI 4.9.5
com.apple.driver.AirPort.Brcm4331 601.15.21
com.apple.iokit.AppleBCM5701Ethernet 3.2.5b3
com.apple.driver.AppleUSBHub 5.1.6
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleAHCIPort 2.4.0
com.apple.driver.AppleUSBOHCI 5.1.5
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleUSBEHCI 5.1.5
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleACPIButtons 1.6
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.6
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.security.quarantine 2
com.apple.nke.applicationfirewall 4.0.39
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.iokit.IOSurface 86.0.2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.iokit.IOBluetoothFamily 4.0.9f8
com.apple.driver.DspFuncLib 2.3.0f2
com.apple.iokit.IOAudioFamily 1.8.9fc9
com.apple.kext.OSvKernDSPLib 1.6
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.0.9f8
com.apple.driver.AppleHDAController 2.3.0f2
com.apple.iokit.IOHDAFamily 2.3.0f2
com.apple.driver.AppleGraphicsControl 3.2.6
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.2.0d16
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.nvidia.nv50hal 8.0.0
com.apple.NVDAResman 8.0.0
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d11
com.apple.kext.triggers 1.0
com.apple.driver.AppleUSBMultitouch 235.7
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.5.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOUSBMassStorageClass 3.5.0
com.apple.iokit.IOSCSIBlockCommandsDevice 3.5.1
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.5
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOAHCISerialATAPI 2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.1
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 500.15
com.apple.iokit.IOEthernetAVBController 1.0.2b1
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.2.0
com.apple.driver.NVSMU 2.2.9
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.6
com.apple.iokit.IOHIDFamily 1.8.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.TMSafetyNet 7
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.6
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Process: powerd [17]
Path: /System/Library/CoreServices/powerd.bundle/powerd
Identifier: powerd
Version: 321.5.3
Code Type: X86-64 (Native)
Parent Process: launchd [1]
User ID: 0
Date/Time: 2012-09-07 19:24:11.479 -0700
OS Version: Mac OS X 10.8.1 (12B19)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
*** CFRelease() called with NULL ***
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 com.apple.CoreFoundation 0x00007fff92f02f18 CFRelease + 40
1 powerd 0x000000010b45e458 0x10b45b000 + 13400
2 powerd 0x000000010b45f72d 0x10b45b000 + 18221
3 libdispatch.dylib 0x00007fff935e90fa _dispatch_client_callout + 8
4 libdispatch.dylib 0x00007fff935eb2d7 _dispatch_source_invoke + 691
5 libdispatch.dylib 0x00007fff935ea349 _dispatch_queue_invoke + 72
6 libdispatch.dylib 0x00007fff935ee0cd _dispatch_main_queue_callback_4CF + 220
7 com.apple.CoreFoundation 0x00007fff92f2f81e __CFRunLoopRun + 1614
8 com.apple.CoreFoundation 0x00007fff92f2edd2 CFRunLoopRunSpecific + 290
9 com.apple.CoreFoundation 0x00007fff92f3da81 CFRunLoopRun + 97
10 powerd 0x000000010b461209 main + 2157
11 libdyld.dylib 0x00007fff8a4857e1 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff8cb72d16 kevent + 10
1 libdispatch.dylib 0x00007fff935ebe26 _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff935eba2a _dispatch_mgr_thread + 54
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00007fff93087a97 rbx: 0x00007fbab240b400 rcx: 0x00007fbab241f838 rdx: 0x0000000000000001
rdi: 0x0000000000000000 rsi: 0x00007fff87bac068 rbp: 0x00007fff547a3ed0 rsp: 0x00007fff547a3e90
r8: 0x00000000000000ec r9: 0x00000000b987c4c1 r10: 0x00007fbab2403630 r11: 0x00007fff793904e0
r12: 0x000000010b47d5c0 r13: 0x000000010b47d8c0 r14: 0x00000000000000ec r15: 0x0000000000000000
rip: 0x00007fff92f02f18 rfl: 0x0000000000000246 cr2: 0x0000000104408000
Logical CPU: 0
Binary Images:
0x10b45b000 - 0x10b478fff powerd (321.5.3) <63728D05-176A-33F6-B5CB-C5FBA0DF9DC4> /System/Library/CoreServices/powerd.bundle/powerd
0x7fff6b05b000 - 0x7fff6b08f93f dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
0x7fff87b91000 - 0x7fff87bb3ff7 libxpc.dylib (140.37) <C552985C-2171-3136-A1B9-3AB21CBF7C4A> /usr/lib/system/libxpc.dylib
0x7fff87bb8000 - 0x7fff87bbefff com.apple.DiskArbitration (2.5 - 2.5) <348AC0CC-6BCE-3416-9141-A5C1164EDDFF> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff87c1d000 - 0x7fff87c25fff liblaunch.dylib (442.21) <224CB010-6CF8-3FC2-885C-6F80330321EB> /usr/lib/system/liblaunch.dylib
0x7fff88124000 - 0x7fff88324fff libicucore.A.dylib (491.11.1) <17E8B610-6B16-3F91-B49C-7CAE0D08E9CF> /usr/lib/libicucore.A.dylib
0x7fff88325000 - 0x7fff88338ff7 libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
0x7fff8963e000 - 0x7fff8963fff7 libdnsinfo.dylib (453.16) <38A3E0F4-E34C-3D45-A2C9-4CDE2DF007BD> /usr/lib/system/libdnsinfo.dylib
0x7fff896c6000 - 0x7fff89792fef libsystem_c.dylib (825.24) <16B6B86C-53EE-36E8-AC2B-4AADC1008098> /usr/lib/system/libsystem_c.dylib
0x7fff89f9b000 - 0x7fff89fa6fff libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
0x7fff8a062000 - 0x7fff8a0b3fff com.apple.SystemConfiguration (1.12 - 1.12) <7A8300B5-F5B3-39F0-A4B2-4C0C293FA29F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff8a483000 - 0x7fff8a486ff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
0x7fff8a6e5000 - 0x7fff8a709ff7 libc++abi.dylib (24.2) <340E7C7B-DC93-3AA2-B015-B1C9541EC255> /usr/lib/libc++abi.dylib
0x7fff8a70a000 - 0x7fff8a738ff7 libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
0x7fff8a739000 - 0x7fff8a7a6ff7 com.apple.framework.IOKit (2.0 - 755.9.7) <9B7C5E7A-3F7A-3E70-8179-4384992B84E0> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8bb9e000 - 0x7fff8bc9bfff libsqlite3.dylib (138) <8D6A6805-1494-30D1-9F2A-F58FA3C0D7EE> /usr/lib/libsqlite3.dylib
0x7fff8be8e000 - 0x7fff8beddff7 libcorecrypto.dylib (106) <57BC99C6-3C3F-344C-BDD6-25E845D956F2> /usr/lib/system/libcorecrypto.dylib
0x7fff8bff1000 - 0x7fff8c109a27 libobjc.A.dylib (532) <9FA80CDA-97F4-3801-8879-0C1B976BC5CA> /usr/lib/libobjc.A.dylib
0x7fff8c10d000 - 0x7fff8c112fff libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
0x7fff8ca10000 - 0x7fff8ca1eff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
0x7fff8cb5b000 - 0x7fff8cb5cfff libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
0x7fff8cb5d000 - 0x7fff8cb5fff7 libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
0x7fff8cb60000 - 0x7fff8cb7bff7 libsystem_kernel.dylib (2050.9.2) <F646589B-13F8-3685-8C17-92C77993AE86> /usr/lib/system/libsystem_kernel.dylib
0x7fff8cc4e000 - 0x7fff8cc4efff libOpenScriptingUtil.dylib (148) <4DB14EC4-422C-3AE8-83BF-354FEC197FD3> /usr/lib/libOpenScriptingUtil.dylib
0x7fff8cd21000 - 0x7fff8cd27ff7 libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
0x7fff8da48000 - 0x7fff8da57ff7 libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
0x7fff8da6c000 - 0x7fff8dab8ff7 libauto.dylib (185.1) <73CDC482-16E3-3FC7-9BB4-FBA2DA44DBC2> /usr/lib/libauto.dylib
0x7fff8df7c000 - 0x7fff8df7cfff libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
0x7fff8f3ec000 - 0x7fff8f3edff7 libSystem.B.dylib (169.3) <365477AB-D641-389D-B8F4-A1FAE9657EEE> /usr/lib/libSystem.B.dylib
0x7fff8f5ae000 - 0x7fff8f87bff7 com.apple.security (7.0 - 55178.0.1) <8102877E-C866-33D4-A947-02FC7F4BAA95> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff8f87c000 - 0x7fff8f979ff7 libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
0x7fff8ff4a000 - 0x7fff8ff5cff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
0x7fff90715000 - 0x7fff9071bfff libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
0x7fff90789000 - 0x7fff9078afff libDiagnosticMessagesClient.dylib (7) <56A70657-E8C2-3804-AB87-77DC100512A4> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff9078b000 - 0x7fff9078ffff libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
0x7fff9173c000 - 0x7fff9174aff7 libkxld.dylib (2050.9.2) <4BEE9BC3-3708-330E-89D6-03E715D712CC> /usr/lib/system/libkxld.dylib
0x7fff91f63000 - 0x7fff91f6bff7 libsystem_dnssd.dylib (379.27.1) <B9F7B01D-8FAF-3CA5-909E-4D52B8D2DD8A> /usr/lib/system/libsystem_dnssd.dylib
0x7fff923cc000 - 0x7fff92434ff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
0x7fff9299a000 - 0x7fff9299ffff libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
0x7fff92efa000 - 0x7fff930e3fff com.apple.CoreFoundation (6.8 - 744) <47AEA7C7-EF9B-3FC6-AEBF-CE02FC650301> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff930f8000 - 0x7fff93105fff libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
0x7fff931ed000 - 0x7fff931effff libquarantine.dylib (52) <4BE2E642-A14F-340A-B482-5BD2AEFD9C24> /usr/lib/system/libquarantine.dylib
0x7fff935e7000 - 0x7fff935fcff7 libdispatch.dylib (228.18) <0B6B6E7F-4D8A-3F3B-A4BF-6CF34638DBBB> /usr/lib/system/libdispatch.dylib
0x7fff935fe000 - 0x7fff93605fff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
0x7fff93606000 - 0x7fff9363cfff libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
0x7fff9363d000 - 0x7fff9363eff7 libsystem_sandbox.dylib (220) <3C3B03CF-C525-3CB3-8557-62E91B93AC95> /usr/lib/system/libsystem_sandbox.dylib
0x7fff93c7d000 - 0x7fff93c8bfff libcommonCrypto.dylib (60026) <2D6537F5-1B5E-305C-A1CF-D1FA80CA3939> /usr/lib/system/libcommonCrypto.dylib
0x7fff93c8f000 - 0x7fff93cf8fff libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
0x7fff9454c000 - 0x7fff9454dff7 libremovefile.dylib (23.1) <DBBFAF35-AC78-3856-92F6-6E4FD9DF14A2> /usr/lib/system/libremovefile.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 1
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 179
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=67.7M resident=47.6M(70%) swapped_out_or_unallocated=20.1M(30%)
Writable regions: Total=29.1M written=560K(2%) resident=648K(2%) swapped_out=0K(0%) unallocated=28.5M(98%)
REGION TYPE VIRTUAL
=========== =======
MALLOC 20.3M
MALLOC guard page 32K
STACK GUARD 56.0M
Stack 8712K
VM_ALLOCATE 8K
__DATA 1448K
__LINKEDIT 52.8M
__TEXT 14.8M
__UNICODE 544K
mapped file 18.1M
shared memory 12K
=========== =======
TOTAL 172.7MThere was a similar thread in here yesterday.
This can be a mechanical issue: a loose connector, broken wire or cracked logic board that causes power from the battery to be interrupted when the Mac is jostled. Unless damage is grossly evident, tracking down the exact point of failure is an exasperating Sherlockian exercise. -
Flex app doesn't work when moved from original location
I'm trying to make an image gallery in flex. It works when I run it in Flex Builder perfectly fine. The html and swf files from the bin-debug folder work perfectly fine when opened in any browser also, but ONLY when those files and all related files are opened from the default location that the application was built in. When I export a build to a different folder, the swf loads but none of the information from the xml file displays. I tried setting all of the paths of the reference files (namely the xml) in the flex app to the exact absolute location on the server, and it still didn't work when I uploaded it to the server.
I've tried several approaches starting from scratch and they have all come up with the same issue. I'm working with an educational license for Flex Builder, I'm not sure if they jip you on those and ruin the compiled swf.
Please help! I'm losing my mind over this.I think it has to do with something else besides the code since it works fine when I hit "Run", but if anyone thinks it will help to post the code let me know.when you build an application using one of the wizards (like coldfusion flex application wizard) it hard codes
paths to cold fusion CFC's, and sometimes gets it wrong.
If your application references cfc's (or other remote objects) then it may be necessary to adjust the flex code
when moving the code into a different base folder.
For example in my own application, the url is http://localhost/crm_dev_flex and the built application gets put into
c:\inetpub\wwwroot\crm_dev_flex\bin-debug
References in the code to components found in c:\inetpub\wwwroot\crm_dev_flex\bin-debug\components\cfgenerated
(in the flex code these looks like crm_dev_flex.bin-debug.components.cfgenerated.<mycomponent> )
These need to change when you move the code to somewhere else.
Also, if you are using wizard generated cfc's then these also contain similar references that need to be changed.
IHTH.
Cheers -
Follow up on: Topic : iBook G4 800 MHz freezes when moved or bumped lightly
Last year I posted the following message, which has been fixed. Summary of repair at bottom of post:
Original message posted Aug 4, 2007:
"For the past several months my iBook G4 has been freezing when moved or bumped lightly. It has also occasionally done some strange things at startup. It sometimes will show just a grey screen and sit there. Sometimes the screen will do some sort of fade transition across the screen, going bright in a wave accros the screen and then to black and then nothing. Sometimes there will be vertical lines in the middle of the right side of the screen of various colors. And the last significant occurance is the occassional static in the display. These video symptoms always occur at startup. If the computer starts up to the desktop it will only freeze if moved or bumped lightly. The cursor sometimes can still be moved after the computer freezes.
I have done the following:
Clean install of OS (Tiger 10.4) with all updates and tested before updating. If have done this before and after wiping the drive clean.
I have removed the extra RAM, reseated the RAM, removed the Airport Extreme card, reseated the Airport Extreme card. I have chaged out the hard drive. I have also disassembled most of the computer to check for any other loose components. The only discrepency I have found was a crimped microphone wire, that is slightly damaged. The screen was replaced a few months after purchase when it had a close encounter with a hot wheel car of my son's. The computer is currently a little over three and a half years old.
I work on computers for a living, specialize in Macs, and have been using Macs since 1986. I am stumped. Can someone please shed some light on this issue by providing a different point of view than my own. Sometimes we need an outside perspective to solve some problems.
Thanks in advance for any help you can provide."
Solution provided by Apple:
I took the laptop to the Apple Store and sent it in for the flat rate repair, which was a little over $300. They had to replace the motherboard and some of the cable. The bad motherboard was causing video issues, freezing and startup difficulties. The bad cables were causing the freezing when the unit was moved. The laptop has performed exceptionally well since the repair and is still in use. Hope this helps other people out there.As a guess it suggests to me that the leads on U28 need to be reflowed.
Mad Dog -
I have an iPad 2 and receive e-mail through regular internet connection. Lately, when I delete e-mails, and clear my Trash folder, they re-appear, downloaded anew from the server and marked as unread. My e-mail Advanced Settings are selected for "Remove from server when moved from Inbox." Even when I access the e-mail accountfrom my desktop and delete the e-mails, the re-appear on my iPad. Does anyone have any idea what is causing this and what I can do to actually delete them?
Sounds like you are looking in the wrong Administrative Group container which is why you are seeing your Exchange 2010 servers in there.
When you install Exchange 2003 only you will see a container named by default as "CN=First Administrative Group" container. But this could be named anything if you changed the Organization Name on the installation when you installed the first
Exchange 2003 server into the domain/forest.
You will notice that when you install Exchange 2010 part of the AD setup is to create a new configuration container and is named by default "CN=First Administrative Group (FYDIBOHF23SPDLT)".
So it sounds like you are not looking in the right location within ADSIEdit.
You may find the following article also helpful for this issue which is the same resolution:
http://blogs.technet.com/b/sbs/archive/2012/05/17/empty-cn-servers-container-causing-issues-with-public-folders-on-small-business-server-2011.aspx
I recommend though that you ensure your Exchange 2003 servers are fully uninstalled or no longer present in your environment before you go deleting the Servers container though.. The following Microsoft article will help with this:
http://technet.microsoft.com/en-gb/library/gg576862(v=exchg.141).aspx -
Is there a way to remove the size and position readout when moving Lines in Keynote?
When moving the endpoints of lines while creating a presentation, a size and position readout appears on the screen. This obscures details below it, often making it difficult to precisely position a line. Is there a way of disabling this? The option in Preferences for disabling this readout for objects does not work for lines. Is this a bug, or am I missing something?
sberman wrote:
I'm not completely sure I understand, but ...
Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
I will tell him about that, but I don't think that would be it if that is related to animation.
We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out. -
Slow performance when moving bunch of vector shapes
Hi there,
Photoshop CS6 Beta is soo slow in comparison to Photoshop CS5 when moving lots of vector layers. Check the videoa below please:
CS6 - http://screencast.com/t/wBOzhTySdSf
CS5 - http://screencast.com/t/ab7BDbgNxUYe
- GPU Settings Enabled in both
- GeForce GTX 560, latest drivers
- i7 3,4 GHz, 16GB RAM
Why CS6 is so slow in this situation?
EDIT: I found the Problem comes form the Layer Palete. Take a look how changing the tabs form Layers to Channels affect the moving performance : http://screencast.com/t/Gi01o1GzFPzJ
This have to be fixed, as in more complex files this will be huge problem..
Regards,
SKHi,
Nothing peculiar at all. Normal text laters.
Each field have subgroups with info - http://screencast.com/t/ykon4QwdBxC Overall lots of layers there, but in CS5 no problem to move them.
Still can't understand why I can move all of these better when layer palete is not displayed.
Test file - https://docs.google.com/open?id=0B0phn6xiF-cobkc3cUViM0dSV3ktYk5Vbm5Bci1TUQ
Please test it on CS5 (you will notice how smooth it is) and CS6 on both try to switch between layers palete and channels palete and try to move to see the difference. Move whole group named "Form",
Please let me know if I can help with something else to define the problem.
/I'm using Windows 7 x64, Photoshop CS6 beta x64/
Thank you!
Regards,
SK
Message was edited by: Simeon Kartov -
Error when moving a mailbox from one database to another using the EMS
Error "The database is excluded from provisioning.Please Select a different target database for the move"
Above is the Error i get when moving a mailbox to another database on the same Exchange mailbox Server 2013 using the EMSHi MikeVATX,
Using the EMS I ran the Command
below,
Get-MailboxDatabase DBName | select name,*provision*
The result displayed that the Parameter IsExcludedFromProvisioning was set to True which i had to set to false by running the command below as per your guide.
Get-MailboxDatabase -Identity DBName | Set-MailboxDatabase -IsExcludedFromProvisioning
$ False
Then i was able to move the mailboxes.
It now works fine.Thanks for that solution.
Thanks & Regards,
Ronald -
Imac late 2013 laggy gaming when moving camera
Hey guys, on my 2nd late imac 2013 27 inch with the gtx 775m. I replaced my first imac because of yellow tinted screen....2nd screen has same yellow tint, if not worse so I decided to just keep it.
Anyways, with my first imac I got a week ago I noticed that in games on OSX, even with framerates of up to 100 (WoW, portal 2, TF2...) I would still get really choppy lag when moving the camera around my character, whether first person or not. I thought it might be fixed in my new one, but I get the same issue. looking at the GTX 775m specs there should be no frame rate dips at all in these games, and there isn't when running FPS monitoring. Is there a reason why the camera lags when turning it? I'm just confused, it really makes playing games difficult.
PS. This was happening on mountain lion and now mavericks as well.
Thanks and have a good one guys.I hate the yellow tint! Unacceptable for designer.....
-
What should I do to setup a new MacBook pro for first time when moving from a PC?
What should I do to setup a new MacBook pro for first time when moving from a PC?
you have to use the migration assistant if you want your files transfered from your pc to mac this link will be helpful
http://support.apple.com/kb/HT4796 -
Low resolution in psd paintbrush image when moved to CS3
We are putting together a yearbook and have made paint brush images with wet media brushes in psd and moved to indesign. When moved the appear very pixeled? Not sure why? Any help?
Moved?
Did you use file>place?
Bob -
E-mail changes to unreadable text when moved to another mailbox folder
Hi,
when moving a correct received e-mail to another mailbox folder, the mail and the attachment will change to unreadable text and it looks like the column below.
On my iPad and iPhone the mail and the attachment is shown correct. If I forward it to my own account again, the mail is also correct shown an my imac27, as long as it resides in the in-box.
On the other hand, there are lots of mails+attachments with "normal" behavier when moved.
Any idea about that?
mackliko
------=_NextPart_000_0001_01CCF256.3C7DD310
Content-Type: multipart/alternative;
boundary="----=_NextPart_001_0002_01CCF256.3C7DD310"
------=_NextPart_001_0002_01CCF256.3C7DD310
Content-Type: text/plain;
charset="us-ascii"
Content-Transfer-Encoding: 7bit
------=_NextPart_001_0002_01CCF256.3C7DD310
Content-Type: text/html;
charset="us-ascii"
Content-Transfer-Encoding: quoted-printable
<html xmlns:v=3D"urn:schemas-microsoft-com:vml" =
xmlns:o=3D"urn:schemas-microsoft-com:office:office" =
xmlns:w=3D"urn:schemas-microsoft-com:office:word" =
xmlns:m=3D"http://schemas.microsoft.com/office/2004/12/omml" =
xmlns=3D"http://www.w3.org/TR/REC-html40">
<head>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<meta name=3DGenerator content=3D"Microsoft Word 12 (filtered medium)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:"Cambria Math";
panose-1:2 4 5 3 5 4 6 3 2 4;}
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:11.0pt;
font-family:"Calibri","sans-serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
span.E-MailFormatvorlage17
{mso-style-type:personal-compose;
font-family:"Calibri","sans-serif";
color:windowtext;}
.MsoChpDefault
{mso-style-type:export-only;}
@page Section1
{size:612.0pt 792.0pt;
margin:70.85pt 70.85pt 2.0cm 70.85pt;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext=3D"edit" spidmax=3D"1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext=3D"edit">
<o:idmap v:ext=3D"edit" data=3D"1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=3DDE-AT link=3Dblue vlink=3Dpurple>
<div class="3DSection1">
<p class="3DMsoNormal">Mfg<o:p></o:p></p>
<p class="3DMsoNormal">Martin lanzinger<o:p></o:p></p>
<p class="3DMsoNormal"><o:p> </o:p></p>
</div>
</body>
</html>
------=_NextPart_001_0002_01CCF256.3C7DD310--
------=_NextPart_000_0001_01CCF256.3C7DD310
Content-Type: application/pdf;
name="Test.pdf"
Content-Transfer-Encoding: base64
Content-Disposition: attachment;
filename="Test.pdf"Please run /cleanviews switch to check the result.
(Type "Outlook.exe /cleanviews in Windows search bar and press ENTER.)
Please also create a new Outlook profile to check if the issue still persists. Thanks.
Tony Chen
TechNet Community Support
Maybe you are looking for
-
Will mountain lion overwrite lion server?
When I puchased my mac mini server I didn't need the server functions but at the time that was the OS offered, (I see recently that you can order a mac mini server with OS Lion as opposed to OS Lion Server), so I'm just running with the server functi
-
Clicking the Firefox icon to open it is fine but if I open a new tab (Control T) it seems Yahoo carries out the search. How can I get rid of Yahoo? It's not in Tools Add-ons or Extensions and Windows control panel doesn't show Yahoo either. I must ha
-
I am unable to download and open a software program, Exam Soft...
I have an HP Pavillion dm4 with windows 7, i5...i know very little about computers. Desperately need to fix the issue. It will download ExamSoft but it won't open up.
-
Dear all, I am stuck in a problem.After doing AFAB-SM37-SM35 for depreciation run, my client has posted depreciation for the month of january. Now he has changed the date of capitalisation and shift factor for a few assets.The changes have taken plac
-
Sparse Bundle Images on external NTFS formatted drive
I'm currently in the process of re-arranging my own backup setup following on from my recent update to Snow Leopard. For this purpose i have the lend of a NTFS formatted external drive and used a large Sparse bundle disk image. Under 10.5.7 with the