Minor issues since Macbook Pro new

I have been having a few minor problems with my Macbook Pro and none of the available updates have seemed to fix them
-Keyboard backlight keeps defaulting to a lower setting then full brightness (no other topics on this)
-Icon for wireless internet strength will stay one bar below full until clicked on. After coming back from hibernation it will go to full strength and stay that way until shut down.
-Battery will charge too 100% then upon restart it will go to 99% or 98% ( I have read the articles about this already and wanted to see if any new info was available)

No new info on the battery - was and still is normal behavior.

Similar Messages

Trackpad issues on Macbook Pro, new June 2009

I have been unable to resolve a trackpad issue that began this afternoon on my Macbook Pro. The computer was new in June. I was playing an online computer game, and it seemed that drag was locked on even though I hadn't changed any settings. Movements of the mouse dragged the window. The drag would not release with 1 click, 2 finger click etc. When I tried typing, the letters selected and replaced as soon as I typed new ones. After several restarts with the same behavior occurring, I reloaded the Snow Leopard 10.6 OS. I originally installed it about 2 weeks ago, and it has been working fine until now. After the reinstallation, the trackpad will not register most clicks of the trackpad. It will register taps, but it refuses to let the user click and drag. I have Microsoft Vista installed in Boot Camp and the trackpad is operating with the same glitches on boot camp. Clicks of the trackpad do not register most of the time. If they do, I have to click very hard, and even then it doesn't always work.

Be paticent.
You can try a SMC reset:
http://support.apple.com/kb/HT3964
Follow the directions that apply to your machine regarding battery, remove or don't remove yourself.
Try with a USB mouse in the mean time.

Is it true that in order to use the continuity in Yosemite you must have a Macbook Pro newer than 2013?

Is it true that in order to use the continuity in Yosemite you must have a Macbook Pro newer than 2013?

from a third-party site:
In addition to Yosemite, iOS 8.1 and a carrier tethering plan, Instant Hotspot will require an iPhone 5 or newer; a mid-2012 or newer MacBook Air or MacBook Pro; an iMac or Mac mini made since late 2012; or a late 2013 Mac Pro. Instant Hotspot can also be shared from an iPhone with a fourth-generation iPad or newer, any iPad mini model, or a fifth-generation iPod touch.
http://appleinsider.com/articles/14/10/17/yosemite-updaters-will-need-to-wait-fo r-mondays-ios-81-launch-for-sms-relay-instant-hotspot

Menu Bar issues on Macbook Pro

I came across this problem with my mac where after logging in I noticed that the menu bar, specifically the battery and wifi icon takes atleast 5-10 mins to appear and when I hover the cursor anywhere on the right side of the menu bar it shows the spinning rainbow. Also the volume button seems to be greyed out as well and usually I have to plug in ear phones and it will go away but only temporarily. This never happened to my mac until today and for some reason I think it has to do with the installation of Adobe CS6 Master Collection. (yes, it was torrented. no, I wont do it again.) I did some slight research and on some website it said that there could be some applications recently installed that could have caused this to happen. If anyone has a solution I would very much appreciate it.

Having the same issue. Macbook Pro 2011, latest Mavericks update ....
Apple menu disappears and reappears when Google Chrome is open/closed. Behaving the same with random programs. Do you have any ideas?? Software is up to date, THANKS!!!

[SOLVED] Linux kernel 3.6.2-1 issues on Macbook Pro 4,1

After my recent system upgrade to linux-3.6.2-1, I ran into a couple noticeable issues on my laptop. The first was the inability to use "mount -i /home/user", which is in my .bash_profile, to mount my encrypted home directory at login. An error message would respond saying that eCryptfs does not support aes. I was able to manually mount it with "mount -t ecryptfs /home/user/.private /home/user", but could not figure out the issue. I also noticed my laptop running a hotter that usual and found that my fans were not changing according to the sensors. I use macfanctld from the AUR to change my fan speed and killing its process and restarting it had no effect. I then decided my recent system upgrade may be at fault so I rebooted into linux-lts and the issues were solved. I then downgraded linux-3.6.2-1, linux-headers-3.6.2-1, nvidia-304.51-4, virtualbox-guest-modules- 4.2.0-6, and virtualbox-host-modules-4.2.0-6 to linux-3.5.6-1, linux-headers-3.5.6-1, nvidia-304.51-3, virtualbox-guest-modules-4.2.0-5, and virtualbox-host-modules-4.2.0-5. These issues are now fixed on my system with the downgrade and I have blocked them from upgrade in pacman.conf. I did not notice any other issues.
Macbook Pro 4,1 (2008)
Graphics: NVIDIA Corporation G84 [GeForce 8600M GT]
uname: Linux archlinux-MBP 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64 GNU/Linux
CPU: Intel(R) Core(TM)2 Duo CPU T9500 @ 2.60GHz
I felt it was necessary to post this issue, especially if another person also has it, so that it may be resolved in future kernel updates. If there are any logs or other information people need to help resolve this issue or if I should notify a mod of this or something, please let me know.
Last edited by mojojojo (2012-10-28 21:15:37)

After further investigation the issues were easily solved.
Regarding my encrypted home directory, I checked kernel.log and found that ecryptfs did not like the argument ecrypt_key_bytes=16 and that manual mount has the variable name ecryptfs_key_bytes=16. So I simply changed that in my fstab. Auto-mounting my home directory works nicely again.
In regards to the fan issue, I had to alter /etc/macfanctl.conf because the output of the sensors command (lm-sensors) contained some negative values which may have affected average temperatures and such. I excluded those temperatures and played with the constraints more until the fans spun faster when I felt they should.
Still found it strange that some of these issues happened during kernel upgrades, but glad to have solved the issues.

I have heat issues into MacBook pro after installing windows 8. when boot from windows ha've overheating. how can I fix it??

Have heat issues into MacBook pro when boot from windows partition how can I fix it??

panarpan wrote:
Have heat issues into MacBook pro when boot from windows partition how can I fix it??
Are you saying you're running Windows in BootCamp or Windows as a Virtual Machine? You can increase the fan speed on the Mac using smcFanControl and use the software OGELTHORPE recommended to observe improvements.
smcFanControl is a Mac application and doesn't work in Windows, but if you set a higher minimum fan speed (which is how smcFanControl works) while running OS X, when you reboot into a BootCamp partition, that minimum speed tends to be carried over.

Sincing MacBook Pro with TV

Recently bought a Flat Screen HD LED Smart TV. Want to sinc MacBook Pro to it for presentation purposes. Have a HDMI cable connected and worked with costco tv service for an hour to try and sinc and get the resolution to match up. Any ideas out there would be great!

Welcome to Apple Support Communities
You have to get a Mini DisplayPort to DVI adapter and a DVI cable > http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adaptor?fnode =51 Unfortunately, you can't use the Mini DisplayPort to HDMI adapter to connect to a TV with DVI

Pdf printing issue in macbook pro

hi everyone,
since i got a macbook pro, i found this problem. it doesn't respond to command-P (printing) at all. i removed and downloaded the newest version of adobe reader, i reset printing system, updated the printer driver,.. i can't print. i use iMac to print pdf. what could i do to fix this? would it be hardware problem or software problem?
thanks for reading it.

I too have an issue w/ my Macbook Pro keyboard (2nd time since I've owned it) although this one isn't quite as severe as the one reported.
I started noticing over the past couple of weeks that when I type, I start hearing this odd "click" sound every once in a while. As I started to pay more attention to it, it appears that every time I hit the letter 'E', it sounds like the plastic beneath the key is loose or breaking (?). They key itself feels loose and I'm worried that its going to pop off. (this has happened on my Dell Inspiron a few times and its been an annoying issue ever since as it regularly pops off now).
Is this something covered under Applecare? (my previous keyboard issue was a couple of dead keys including the spacebar that required a new keyboard).
Also (side question), when I go to the concierge page to setup a time to visit an Apple Genius, there's GUEST and MEMBER login. Is Member login for those who have Applecare? If so, then what would the member number be? The Applecare agreement # doesn't seem to take.
Thanks,

After several repairs, still having heating issue with MacBook Pro (mid '09)

EDIT: this post got removed the first time for not being constructive enough. I've now edited the post.
This is going to be a lengthy post, so bear with me.
2 months ago, I suddenly noticed my MacBook Pro (medio 2009, 15", 4GB RAM, GeForce 9400M) heating up a lot harder than usual. I'm familiar with the heating issues these laptops have, but this wasn't normal. Looking at iStat Pro, I saw my fans almost taking off like an airplane at 5700 rpm, while watching only a livestream on my browser. I know Shockwave Flash takes up quite a chunk of your CPU, but I had never encountered this problem beforehand.
The biggest problem wasn't just the heat or the fans, but the fact that my computer also started reacting rather slowly. Sometimes I'd even get beachballed, or the whole browser stopped responding for half a minute...
So I tried to see if gaming was still an option. Of course not. I had been playing League of Legends for several months without any issues. Whilst playing, I'd kick up my fans manually to about 4000 rpm, and they'd stay there throughout the whole game. Now, when I start up the game, it plays smoothly for the first 2 minutes. After the temperatures rise to a critical level, the fans start spinning up to 5700 rpm, and the whole game plays like a powerpoint presentation.
On a sidenote: it sort of 'lags' every 1-2 seconds, and sometimes, after a long period, the game acts somewhat normal again (20 mins). This game uses wine to run, which isn't the most optimal way. So I tried playing Team Fortress 2, too. Probably even worse results! (but again noticeable 1-2 second interval lags)
Before anyone starts screaming: "Don't use your Mac for gaming!" etc., I wish to point out that these two games had been running perfectly for the past few months/years. Something's definitely wrong.
After looking for some solutions myself, I decided to go to an authorized Apple Service in my city. A few days later, they told me my logic board was broken, and I had to pay almost 700 euros ($ 900-1000) to replace it. So I did. I got it back, but it wasn't fixed. Brought it back in. Got it back a week later: "Your new logic board we got from Apple was already broken, but we hadn't noticed. We put a new one in it. It's fixed." Again, same problem.
We're almost 2 months later and 700 euros poorer, still no result. I've brought it in about 6-7 times now, here's a list of what they've tried so far:
- In total 3 new logic boards
- New MagSafe (because they discovered it was giving too much power too my laptop)
- Fresh re-install
- Replaced RAM
- Checked fans etc. (they do this by default)
- A few tests which proved that it was repaired (but I have my doubts with these tests...)
They told me now that it's fixed, and they basically won't look into it anymore. I must contact Apple myself, if I wasn't satisfied. The tests they performed showed no signs of heating issues. (One of the tests was playing 4 1080p movies at the same time. When I watch a 1080p movie on Youtube, my laptop is taking off like a plane) They ran a stress test all night long, showing no temperatures above 98°C. I got it up to 105°C in a few minutes according to iStat Pro.
They advised me to install Mountain Lion, which would make the issues with "high-performance sites" go away. I haven't seen much improvement, though.
This whole experience has been quite frustrating, especially now that I'm gonna need my laptop for University again. Isn't there anything I can do? I've paid almost 700 euros and missed my laptop for 2 months, without any results.
I've got more information regarding the issues if needed, ask away. I'm getting desperate.
I've been browsing around the support communites, and found that a lot of people are having issues since they upgraded to OS X Lion. Could this be the case? Should I try downgrading to Snow Leopard?
I've also found a few topics on refreshing the cooling pasta on the heatsink. Would they have noticed any problems with this after replacing the Logic Board several times? Or should I check it myself? I'm not too keen on opening up my laptop myself...
Nick.

Thought of buying Parallels? Fusion?
Might want to see if this gets moved to the MacBook Pro forum.
I'd think Windows 8.1 is smart enough (what I use 90% time since the Dev Preview came out couple yrs ago it seems like) to find the driver.

Hard Drive Connection Issue on MacBook Pro

Hi,
A couple weeks ago my MacBook Pro was running and suddenly went into a non-stop pinwheel freeze. After waiting a few minutes I decided to do a manual shut down and when I attempted to reboot it, I just got a blank white screen that wouldn't go away and then a blinking question mark folder when I tried it again. Luckily I already had an external HardDrive Dock so I removed my Hard Drive, used the system startup Disc that came with the computer to redirect the start up disc, and I've been able to boot my MacBook from the Dock since then through a USB cable. So I have a temporary fix, but of course it requires a lot of set up, it's a slower connection, and is less convenient when I take my laptop from place to place.
What I want to do is replace the connection between the Hard Drive and I my MacBook but I want to make sure that I purchase the right part. My MacBook is two or three years old now but it runs fine (besides these issues) and is fast enough for all of my needs. My Macbook is a MacBookPro5,5 with an Intel Core 2. I believe it is a 15 inch model. I'd like to avoid taking this to the Apple Store if possible because I have a limited budget and this should be a pretty simple repair as long as I'm replacing the right part. Can anyone tell me what the probable part is that I need to replace?
Thanks,
Todd

SuperDuper is not compatible with Leopard, but CCC 3.0.x is.
Put the new drive in an enclosure and connect it to the computer. Prep the drive by partitioning and formatting with Disk Utility. Clone your existing system using either the Restore option of Disk Utility or CCC (CCC is a bit faster.) Test the clone to be sure it boots the computer. If all is well then replace the old drive with the new one and put the old drive in the enclosure.
Bear in mind that doing this yourself is not approved by Apple.

MacBook Pro - New HD: Nothing working

So...I have this brand new MacBook Pro. I've had it for 3 months and I've already had the HD changed, about 2 weeks ago...ever since I've reinstalled everything on my computer through TimeMachine, everything's just been wrong.
I cannot open Microsoft Office anymore, I cannot open my CS2 anymore (I've even tried removing everything and reinstalling and the reinstallation itself is not working)...When I'm connected to MSN or Skype, the webcam isn't working, my iTunes plays 'ghost' music as the music is playing perfectly well, but my music library isn't showing up...
I've gone to the Genius Bar 3 times since I have this computer and I've tried calling the Apple Service Center and they are telling me about this (miraculous) DVD to reinstall Snow Leopard that they are going to send me and that I absolutely have to wait for in order for them to help me out...
I'm just getting frustrated and irritated. Has anybody encountered a similar issue and and if so, what have you done to resolve it or what am I doing wrong?

I would manually copy my files back to their original folder.
Let start with itunes.
On your computer
1- locate : home folder (user)/Music/ iTunes
2- delete it
on your time machine backup
3-locate the iTunes folder (same path)
4-copy "iTunes" back to your computer (same place as where you previously deleted it).
5- restart your computer
6- if that solves the issues do the same with all other data/apps you are having problem with.
That is what I would try.

Adapter issues on Macbook Pro 13"

Hello!
My adapter is having issues and doing strange stuff to my Macbook Pro 13".
The isseus:
Everytime I connect my adapter to my macbook when its on stand by or even shut off, my macbook starts up.
Also, since today. My Adapter isnt connecting propperly, and when it does for only a sec. it crashes my macbook.
What could be the problem here?
hope you can help me
Cheerino's and happy new year to all who's reading this.
P.s.
Macbook Pro 13" OS X Yosemite
Bought January 2013
Adapter: 16.5v - 3.65A
NO retina

Dancer
This sounds like a hardware problem that will likely require a 'hands on' approach. Hopefully there is an Apple Store Genius Bar close-by
Find your local Apple retail store and make a reservation through the online Apple Store Concierge. Reservations are REQUIRED
best luck
ÇÇÇ

Sound Issues with macbook pro 13" and external display

Hey guys I have a 13" macbook pro from mid 2012 with 8 gb ram and the i7 processor. About a year ago I bought a thunderbolt to hdmi adapter and hdmi cable to use my 32 in tv as a monitor. It worked flawlessly and I never experienced the flickering issue people have been talking about. The tv is only 720p so the picture wasn't as clear as it should be. I was also tired of using a pullout desk and thought the 32 in was a little too big so a couple weeks ago I added an entire desk setup in the corner and bought a brand new 24 in Vizio E241i--a1 and mounted it on the wall as a monitor. This tv is the full 1080p. Ever since then, I have had trouble with the sound playing from the macbook>displayport-hdmi adapter>hdmi cable>monitor. I select the monitor as the output device and sometimes it will actually play and sometimes it will not. I mostly use the macbook in clamshell mode when at my desk but sometimes I have both screens on. No matter what if the sound has stopped working it will not go back. If I select the macbook speakers as the output then it will play through the macbook speakers. But once I switch back to the hdmi output for sound it still will not work. The only thing I can do to fix it is to leave the macbook in clamshell mode and then restart it causing the monitor to be the main display at boot up. Once I got the new tv, I also started experiencing the flickering issue people have been talking about with the external monitor. I know it is not because of Mountain Lion because I had Mountain Lion when I used my old setup and never experienced either of these problems. Any ideas on what could be going on? Thanks in advance

Did you format the external drive for use with OS X?
Open Disk Utility. Does Disk utility see the connected drive?
Format it to "Mac OS Extended (Journaled).

Issues with MacBook Pro and Asus VW266H

I own a 2.4 GHz 15 inch MacBook Pro,and an Asus VW266H (external monitor) that I wanted to connect to my Mac via VGA,since the DVI is connected to my desktop computer.So I went ahead and purchased Apple's MiniDisplay Port to VGA adapter,and connected my Mac to my display.At first,the Mac didn't recognize the display with its name and would only go up to a resolution of 1920x1080(while the maximum resolution of the display is 1920x1200). I restarted the Mac with the display plugged in,and once the laptop booted up,the resolution was 1920x1200 and the display was recognized, but immediately quite a lot of trembling was noticeable.When the display wasn't detected properly(as an Asus VW266H) this problem wasn't present. I'm guessing that this is a compatibility issue,which by the way wasn't fixed by the latest EFI update by Apple,which improved external display compatibility. Does anyone have any idea if the problem might be something else other than lack of compatibility and/or how to fix it?
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...

Concerning this comment:
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

Issues with Macbook pro and siemens gigaset se587

Hello!
Wondering if anyone can help me with this issue;
Bought my macbook pro about a year ago as a refurb off the apple site, everything works fine with it up until about a month ago, when the wireless internet kept dropping out and required me to type the passcode back in to gain access (I thought this was wierd as it is supposed to remember this info).
The next stage of this was the router disapeared completely off my airport list, after navigating through the forum pages I found that broadcasting on a different channel usually works, it was on 13 I dropped it down a couple and we had wireless internet once again.
As of recent, my router seems to of randomly reset itself after speaking with TalkTalk we got it back and running... but only on the PC. The element that had changed on the setup was (I may get this wrong) the router was pppoe and not pppoa (im not clued up on wireless networks an lingo, but I hope it provides some insight as to what happend).
The problem now is my macbook can see the router but the passcode (from the bottom of the router) does not work, everytime I type it in I get 'connection timed out' and it only works with a wired connection.
I hope I have provided enough info for you guys to help me out. I will be very appreciative of any insight you can offer.
Thanks in advance
Tom Hall

Concerning this comment:
I know that neither the adapter nor the VGA cable have a problem since I connected the computer to my 1080p TV and it worked just fine...
I would like to point out that 1080p has a lower pixel clock than will 1920 x 1200. So it could be the stability problem is only present when the pixel clock is at the high end of the range.
You could return the adapter and try another. A new one might have better margins. Another thing you could try is to use a utility like SwitchResX to lower the pixel clock and see if stability improves.

Minor issues since Macbook Pro new

Similar Messages

Maybe you are looking for