Minor UI bug when using camera from lockscreen

Hi
I'm not soure where to send this, but I found a bug with the use of camera from the lockscreen.
OS: Windows Phone 8
OS version: 8.0.10211.204
Phone: NOKIA Lumia 620
Phone firmware: 1030.6407.1308.0006
Description:
If I have activated the camera with the camerabutton when the phone is locked, the background on the keypad is always dark next time I try to unlock the phone. My theme background is set to light. Only the keypad background is dark - if I use the volumebutton the "volume indicator" background is light.
It only happens after I have activated the camera using the camerabutton when the phone is locked.
My phone is protected with pincode.
Can anyone reproduce the bug on their phone?
Regards
Brian Overby

It's been my experience, throughout my 36 year career in computer engineering, that RAM tests almost always succeed even when the RAM has intermittent errors.
Do you have ECC (error correcting) RAM? A system set up to use ECC RAM and with ECC RAM installed will correct some errors as it runs, and will halt and immediately tell you when an uncorrectable RAM error has occurred - which is FAR better than trying to forge ahead with bad data (which will ultimately crash it somewhere). RAM errors happen more often than you'd think, probably because it's the one piece of technology being pushed right to the blistering limits in most computers. Even if the chance of a RAM error is one in a billion, keep in mind that literally billions of RAM reads and writes happen every second.
Every future computer system I'll have will have ECC RAM, as do my current ones.
-Noel

Similar Messages

When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYD

BARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Can't open camera from lockscreen iOS 5.1

Can't open camera from lockscreen iOS 5.1? Was able to before the update but now you tap the icon next to the slider and the screen will bounce. Anyone else have this issue

Nice going Microsoft opps I mean Apple!

Multiple POP/SMTP Accounts Bug - Mail uses wrong 'from' address

I've be scratching my head over this but can't see anything else wrong so I figure it must be a bug with Mail 4.2:
I have multiple POP3/SMTP accounts configured, lets say:
[email protected], to receive on pop.blah1.com and send on smtp.blah1.com
[email protected], to receive on pop.blah2.com and send on smtp.blah2.com
If I create emails sourced from [email protected], they are sent just fine.
However if I try to email from [email protected], I get a pop-up telling me that smtp.blah2.com is offline and I need to select another SMTP server.
I checked the server settings a hundred times over and also resorted to telnetting to port 25 of blah2.com to ensure it was full working (yes it was!).
[Even Connection Doctor thinks the servers are all good]
So next I try telling emails sourced from [email protected] to send via smtp.blah1.com - Eureka, it works!
But this is a little odd - so I check the received email headers and compare these with the 'Sent' header.
It appears that mail thinks its sending the email from [email protected] but the email actually ends up being sourced from [email protected]!
So I can only presume that Mail is marking the smtp.blah2.com server as down because it is trying to use the wrong source address when sending a message and therefore being refused by the SMTP relay.
Has anyone else seen this?

Thanks chaps,
The other accounts are direct POP3/SMTP to my hosted servers - they are not passing through GMail and so it couldn't cause the issue.
I have, however, found the problem inadvertently while trying to run a comparison with Thunderbird - the good news is, its not Mail as such, though it does raise a couple of other questions...
Basically, whichever SMTP server is running on my hosted servers, it does not allow a message with no text in the body, while Google's SMTP implementation clearly does.
As my test messages only had a subject line, they were failing on my servers but working OK with GMail.
The questions therefore are:
1. Shouldn't Mail pad an empty message to ensure it goes (MS Outlook works fine with empty messages but interestingly Thunderbird also doesn't)
2. Even assuming its OK to use GMail's SMTP as a relay, shouldn't Mail use the correct source address rather than making it look like the emails came from my GMail account?
- I'm not sure if this is 'allowed' with modern SMTP from a security perspective but I think that some services support it.
Thanks for all your input!
J

Use camera from pre-comp without collapsing comps

Hello,
I'm facing a problem that I can't solve.
Hope you can help.
I have a huge composition with some precomps, imported from photoshop, with blending modes etc.
Everything is working fine, but in one of the precomps I turned the layers 3d, and added a camera.
On the precomp it works fine, but when I go to the main comp, nothing happens. I solved the problem
collapsing pre-comps, but the thing is that I lose all the blending modes of my elements.
Any idea of how to keep my blending modes and also use the camera from the pre-comp?
(The pre-comp is a graphic with a much bigger resolution, that I need the camera to zoom-out)
Thank you.
Best,
João

My pre-comp works fine, when I say nothing happens, I mean there is no camera movement on the main comp as in the precomp.
If I move the camera to the main comp, and lights, The pre-comp gets the movement I want, but doesn't get rid of the resolution size of the pre-comp.
But I think that shoul do the trick if I increase the size of the precomp.
Thank you guys for all the help

Workaround: SWVMS16 Crash when using Camera Search Function

When using the camera search functionality, SWVMS16 may crash. The issue is caused when non-camera UPnP devices on the network send out large packet sizes. Upcoming video monitoring releases will fix this issue.
Workaround: If the issue occurs, add your cameras manually to the SWVMS16.
SWVMS16 v1.21 Release Notes posted online.
http://www.cisco.com/en/US/docs/security/csbvsc/swvms16/release/notes/Release_Notes_VMS.pdf
Attached file shows the error message and the steps to manually add cameras to the SWVMS16.

Hi agschin and welcome to the RH forums. The hhactivex.dll
file is not used by the search function so you can rule that our.
Have you tried recompiling and seeing if the problem still happens?
You can also start the Bug Hunter feature in RH - View > Output
View and then select the Bug Hunter button - and see if that throws
up any clues.

No sound from TV when using HDMI from HP Envy Ultrabook4 despite downloading drivers

Problem: When using an HDMI cord from my HP Envy Touchsmart Ultrabook 4 (4-1105dx)to connect to my TV to view movies, the video appears on my TV screen, but there is NO sound from the TV. Instead the sound comes from my lap top.
Troubleshooting: I have looked under Sounds in the Control Panel, but the only choice listed is Speakers & Headphones IDT High Definition (which is the default) and does not allow sound from the TV when using the HDMI. I have also tried to download Driver and Audio Graphics, but wasn't sure which one & the ones which were downloaded have not solved the problem.
Can you assist me? Which is the correct Audio/Graphic Driver to download? Or is there another possible reason why I cannot hear sound from my TV when using the HDMI to connect to my lap top?

Hi,
Please try this first to enable Speakers in Playback devices as follows:
1. Right click speaker icon (bottom right hand corner)
2. Select Playback devices
3. Right click HDMI sound
4. Enable it
5. Click Apply/Ok
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Potential bug when using Parsley 2.4.1 and Cairngorm's module 0.17 in Flex 4.5.1

Hi
I have an issue when using cairngorm's ModuleViewLoader along with ParsleyModuleDescriptor to load a simple module consistig mainly of HBoxes, VBoxes and Datagrids.
The module consists of one child (let's call it ViewA) and that child consists of several children as its components.
When I use cairngorm's ModuleViewLoader along with the ParsleyModuleDescriptor and Parlsey to inject the modulemanager in my main app, the module loads, as well as ViewA but some nearly all of ViewA's children are not loaded (in fact they're initialized but creationComplete is not invoked).
When I use Flex's mx:ModuleLoader all ViewA's chikldren are initialized and creation complete is also invoked.
I will attach the source as a zip file later on....
but for now...this is all I can give http://dpaste.com/713503/
Thanks
Andreas

Did you ever find an answer to this? I am running into the same issue with needing to upgrade parsley to 2.4.x, but with parts of application heavily relying on cairngorm module, upgrading it from module-0.11 to 0.17 seems to break compile!

Help please? I would not like the audio to mirror to my TV when using airplay from my MacBook.

I have a small music studio setup. I have an audio interface for the output of my macbook's audio. I like to use airplay with my macbook and apple TV. But when I use air play, my audio stop outputting from my macbooks audio output interface and mirrors through my TV speakers.
I'd like the audio to remain playing from my setup output but the screen I'd like mirrored through my apple TV and moutain lion.
Any suggestions?
Thank you in advance.
Nicky

There is no "corruption" involved - iTunes typically revises the format of its database with new versions, so these are not backward-compatible with prior releases. iTunes does, however, preserve the library file from the previous release when you upgrade. If you've already uninstalled iTunes 12 and installed an outdated version, you can skip steps 1 and 5 below.
Unistall iTunes 12
Delete or rename the iTunes Library.itl file (by default in C:\Users\username\Music\iTunes)
Locate the date-time stamped copy of the iTunes Library.itl file in the Previous iTunes Library folder (this should be the one created when you updated from 11 to 12)
Copy this file to the location identified in step 2, and rename it iTunes Library.itl
Install iTunes 11
Hold down Shift as you start iTunes, when you get this prompt:
click Choose Library..., navigate to and select the iTunes Library.itl file from step 4, and click OK.
"Opening past libraries" doesn't work if you're simply double-clicking on the old library database files in the Previous iTunes Library folder - this will just launch iTunes and load the current database file.

When using photos from the "Media" option in Applescripts and other apps, it takes a LONG time to load the photos from iPhoto...

It also happens when using the Media option in programs like iMovie. Has anyone found a solution for this problem?

That is long...
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?
If it is...
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there.
Regards
TD

Bug when using IBOT

Hi all,
has anyone had this kind of error?
I am using IBOT, and I set Schedule_ to Start Date=21/09/2009, Time of Day=08:00, Set Time Zone=GMT+01:01, and Recurrence_ to Every 1 week(s) on MON.
When I look overview of this IBOT, everything is fine, but when I go Show IBOTs acting on my behalf Next Run is not date that I had set. And IBOT is not running in time that he should. But when I set Recurrence_ Daily Every 7 day(s) every thing is OK. IBOT is running and Next Run shows correct date and time.
Thanks

This looks the same as bug 5539348 "Schedule an iBot to run immediately and weekly, the immediate run doesn't take place". According to that bug when you say start immediately and run every 1 week you are actually saying start the schedule now not start the ibot?! So a schedule is created in the scheduler to run your ibot every week on Mon but it does not run it immediately.
I think this is a bug with the weekly schedule though as setting it to 7 days seems to fix it. The bug database seems in infer that later releases of 10g fixed this problem so it might be worth upgrading to a newer patch release if it becomes a problem and seeing if this fixes it.

Data refresh bug when using inheritance?

I am getting unexpected behaviour when using the pm.refresh(Object) method.
Refresh works correctly and reloads data if the lock has been updated on
tables/objects with no inheritance. However, if I try to use refresh on an
object that is part of an inheritance hierarchy, the query that is executed
to get the jdolockx value is missing the table join.
Example:
Table Entity
id
displayname
jdolockx
jdoclassx
Table Individual (inherits from Entity)
id
firstName
lastName
jdolockx
Query executed when calling refresh and passing in Individual
SELECT
t0.JDOLOCKX
FROM
ENTITY t0,
INDIVIDUAL t1
WHERE
t1.ID = 1151
Problem
Missing crucial join t1.ID = t0.ID
These classes work correctly with correct SQL when inserting/selecting.
Any help is greatly appreciated.
Regards
Nathan Boyes

Sorry, forgot to mention Kodo version
Kodo 2.5.3
SQLServer2000
"nathan boyes" <[email protected]> wrote in message
news:bmj215$qq3$[email protected]..
I am getting unexpected behaviour when using the pm.refresh(Object)method.
Refresh works correctly and reloads data if the lock has been updated on
tables/objects with no inheritance. However, if I try to use refresh onan
object that is part of an inheritance hierarchy, the query that isexecuted
to get the jdolockx value is missing the table join.
Example:
Table Entity
id
displayname
jdolockx
jdoclassx
Table Individual (inherits from Entity)
id
firstName
lastName
jdolockx
Query executed when calling refresh and passing in Individual
SELECT
t0.JDOLOCKX
FROM
ENTITY t0,
INDIVIDUAL t1
WHERE
t1.ID = 1151
Problem
Missing crucial join t1.ID = t0.ID
These classes work correctly with correct SQL when inserting/selecting.
Any help is greatly appreciated.
Regards
Nathan Boyes

Text converted to graphics when using shapes from iWork

I'm in the process of constructing a web site and want to have a site directory along the right side of each page. I started off using square text boxes and making room for the directory by using iWeb's text wrap, adding an inline transparent square to a conveniently located paragraph and resizing it as necessary. However, I found that sometimes depending on which object was selected when I uploaded the site the square seemed to cover up my link box - possibly even when it was sent to the back.
Then I learned that I could use shapes from Pages and edit them in iWeb, so I created a polygon with an opening for the site directory, and used it for my text box on each page. That worked great in that the directory was no longer behind the text box. However when I uploaded the web site, I eventually realized that my text boxes were all converted to graphics.
As a test I created a page identical to an existing page with a square used as a text box, and it reverts to being text.
Here's my web site if anyone wants to check it out - look at the main page and also at the Test Page reachable from the directory on the right.
http://web.mac.com/peterynh
A couple questions:
1. Does this mean that shapes created using the drawing tool in Pages that are made editable and then modified in iWeb will always produce graphics when used as text boxes? Is there any way around this?
2. Is the same a problem if shapes are created in other programs (e.g. Illustrator)?
3. Is there any other way I haven't thought of to create the same basic design which would preserve the text boxes as text?
Thanks for any help!,
Peter
PowerMac Dual G5, 2.3 GHz Mac OS X (10.4.5)

James - Thanks for the suggestions and ideas.
You know, I think it's possible to put a textbox
inside another text box......and in that fashion
still be able to wrap text in the main text box
around the interior text box. However, I am not sure
whether that will necessarily make all the text
converted into an image.
I tried that with interesting results. I couldn't resize the text box except through the Inspector for some reason. Once I pasted in the text, the box moved down below the site directory box to where there was room for a full-width text box; so it didn't accomplish the purpose.
About using iWeb's built-in text-wrap through adding an inline graphic:
This would work too...just make sure to select your
text box and click on the "Backward" button in order
to make sure that your main text box with the
transparent "placeholder" image is behind your
directory box that you want displayed. The same
thing can be achieved by selecting your directory box
and clicking "forward" so that it becomes the
frontmost element.
That makes sense. I tried that originally; maybe I wasn't careful about sending things to the front/back. The biggest problem is that if paragraphs don't line up with the site directory box, or if I edit text on the page, the text doesn't wrap very neatly around where I want it to. Otherwise this would be a good solution. I may end up doing this unless a better idea materializes, if such is even possible ...
Thanks for the suggestions. I'll be interested to see if any better ideas appear; if none do in the next couple days I may just declare the problem solved as well as possible until iWeb 2.0 appears.
Peter
PowerMac Dual G5, 2.3 GHz Mac OS X (10.4.5)

CS5: Bug when exporting directly from PPro with hardware MPE?

For the record, I'm using:
A GTX-480 (unsupported)
The hardware MPE-enabling hack (unsupported)
The latest version of the nVidia drivers (257.whatever)
I discovered an issue, of sorts, when exporting directly from Premiere CS5, versus using the "Queue" option to send to AME. I was exporting from an NTSC DV Standard sequence to a 320x240 H.264, in which I had enable cropping and trimmed a bit off the sides and top and bottom of the source; the Output tab was summarily set to "Scale to Fit". With hardware MPE enabled in the Project Settings, the export would be the proper final dimensions (320x240), but any area that was cropped off was instead padded with black. The actual video content was then squeezed and malformed into the area not occupied by the black bars.
I found that, if I disabled hardware MPE or sent the export through AME by use of the Queue button (instead of Export), then the export was performed properly--the video was cropped correctly and then the video stretched to the borders of the exported video, maintaining the desired aspect ratio.
As I mentioned at the outset, I'm breaking a couple rules and perhaps tempting fate with others, but before I go about rolling back my drivers and the like, has anyone noticed a similar issue?
ADDENDUM: By the way, the export doesn't need to come from a sequence. If I load up a source clip into the Source Monitor, and export from there using the process outlined above, I get the same issue. This would seem to indicate, to me, that this is due to some incompatibility with my card, its driver and hardware MPE...

Did he demo renders or exports?
About 11 minutes in, he [Dave] demos accelerated H.264 renders.
Harm Millaard wrote:
AFAIK MPE only works with renders, not with encoding.
Well, he did both, actually--but the quote above is a typo on my part. I meant to say "exports" or "encodes." The last couple minutes of the aforementioned demo video are dedicated to exporting a sequence directly from Premiere, and having the benefit of hardware MPE. That's where I'm getting the issue I've outlined above; with hardware MPE enabled, and using the "Export" versus AME "Queue" button/function, I get the strange black outline. With software MPE or through AME, all is well.

Apple TV loses wireless network connection when using AirPlay from iPad or iPhone 5

Our Apple TV loses connectivity to our wireless network while using Airplay from our iPad or iPhone 5. This started occurring after the latest iOS update. We are able to wirelessly stream movies from iTunes without any problem. This issue occurs only when using AirPlay. Does anyone have any suggestions?

I have a:
new MBPr 15" late 2013 with dedicated graphics card
new airport extreme base station
3rd generation apple tv
iPhone 5s
200mb download speed (not important, as streaming video on your local network has nothing todo with outside bandwidth)
All equipment is up to date software wise. Airplay mirroring from my laptop to my apple tv is ok. I get frequent lag, pixelation, audio skip (every 10 mins or so).
I'm using the 5ghz specturm to connect to the airport express so shouldn't have any inteference from my neibours (accordiing to iStumbler i'm the only person with a 5ghz setup using channel 30). I've tried connecting apple tv wirelessly and wired. No issues streaming from my iPhone or an iPad!
Surprisingly, using apps such as Beemer or Air Video Server on my MBP work better than native mirroring when it comes to video play back.
Strange when you think how Air Video works:
Video file lives on MBP
iPhone connects to laptop
Video plays on iPhone and is sent to Apple TV via Air Mirroring
Rather than:
Video played on laptop
Video sent to Apple TV
Seems bizzare that my iPhone can handle better streaming than my pro laptop.

Minor UI bug when using camera from lockscreen

Similar Messages

Maybe you are looking for