MinSAP Basis installation problem

Hi Gurus,
I am a total newbee to SAP and ABAP and am trying to install minisap on my pc so that i can practice ABAP.
I have installed the MS Loopback adapter and have updated the Hosts files as follows
127.0.0.1 localhost
10.10.10.10 MYCOMPUTER
The name of my computer is "MYCOMPUTER"
During installation i get the following error message
Error: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup
       can not get information for host "MYCOMPUTER"
Error: CENTRDBINSTANCE_NT_IND ColdKeyCheck
       Phase failed
Error:Main {}
       Installation aborted
Please can anyone help. I have checked existing posts and have tried some of the solutions but it has not helped. I still get the same problem.
Thanks in advance.

Hi,
[|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/minisap-46d-installation-problem-1529311#]
Solution to your problem..... I've tried just about everything
to get minisap running on Vista. Finally to get it to work you
need to install Virtual PC 2007. Create a Virtual XP PC with
(512mb ram if possible) and 10gb hard drive.
After creating the virtual XP. Start it and insert your XP Cd it
will install XP on your Virtual machine. After that remember to
follow the right installation procedure (1)Loop back Adapter, IP
Address (2) Host File editing (3) Sap DB Installation (4) Sap
GUI installation (5) Enjoy programming on SAP
Cheers.
...Reward if useful.

Similar Messages

Minsap Installation problem

Hi friends,
i am getting this error while installing minsap on my home PC.
Error: CALCRAM_NT_MSS ColdKeyCheck 2 178
Phase failed.
Error: Main {} 2 178
Installation aborted.
any solution?
thanks in advance...

Hi,
[|http://sap.ittoolbox.com/groups/technical-functional/sap-dev/minisap-46d-installation-problem-1529311#]
Solution to your problem..... I've tried just about everything
to get minisap running on Vista. Finally to get it to work you
need to install Virtual PC 2007. Create a Virtual XP PC with
(512mb ram if possible) and 10gb hard drive.
After creating the virtual XP. Start it and insert your XP Cd it
will install XP on your Virtual machine. After that remember to
follow the right installation procedure (1)Loop back Adapter, IP
Address (2) Host File editing (3) Sap DB Installation (4) Sap
GUI installation (5) Enjoy programming on SAP
Cheers.
...Reward if useful.

Installation problems on Solaris 9

I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp/ttainst_1/ttapkg.15978/pkg>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

from the diagnostic details:
Architecture           spso0509
Host           SunOS e220r 5.9 Generic_117171-17 sun4u sparc SUNW,Ultra-60
Package           Tarantella Secure Global Desktop Enterprise Edition for
SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Andrew
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Hangul
Fonts (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Platform
Identity Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Security
Pack for SPARC Solaris 2.8+ (4.10.903)
Package           Tarantella Secure Global Desktop Enterprise Edition Windows
Connectivity Pack for SPARC Solaris 2.8+ (4.10.903)
Bill Weir wrote:
Gavin,
Glad you're sorted. Can you confirm that it is 4.10.903 you are using
(not 4.00.903)? I'm concerned if this installation problem is still
present in the later version.
Bill
Gavin Westermann wrote on 31/08/2005 05:00:
Bill - that seems to have done the trick! the installation is now running.
Thanks so much for this.I am running a pair of Sun Ray 170's on my desk
here at home mated to an E220R. I am hoping to use Tarantella to be able
to access and run apps on a win3k server in the same rack.
Gavin
Bill Weir wrote:
Gavin,
This looks like a known problem with TTA 4.00.903 and some Solaris
patches which were distributed at about the same time. However, you say
you're using 4.10.903, and as far as I know the problem should be fixed
in that version.
You could try the workaround described in
http://www.tarantella.com/documentation/sgd/ee/4.0/install.html - search
for "tta_pkgadd" on that page and follow the instructions given there.
Regards,
Bill Weir, Sun Microsystems Inc.
Gavin Westermann wrote on 30/08/2005 05:06:
I am having issues installing the base software and can't seen to figure
out how get past this. The error message from the installation log is as
follows:
Accept terms of Software License Agreement? [R] y
pwd: cannot determine current directory!
/tmp/installwnaWXF/checkinstallynaWXF: no home directory
Error during installation. Setup will now exit.
Please correct any errors described in /tmp/tta_inst.log, and then try
again.
Cleaning up temporary files...
# cat /tmp/tta_inst.log
**snip**
Processing package instance <tta> from </tmp>
Tarantella Secure Global Desktop Enterprise Edition for SPARC Solaris 2.8+
(SPARC) 4.10.903
Tarantella, Inc.
pkgadd: ERROR: request script did not complete successfully
Installation of <tta> failed.
No changes were made to the system.
Script detail for package <tta>
---> checkinstallynaWXF
Any help from here would be appreciated.
gavin

Installation Problem error when trying to create WSDL resource in OSB proje

Hi everybody!
I'm getting following error while trying to create a WSDL resource in OSB console:
Caused By: com.bea.wli.sb.common.UserException: Diagnostics for WSDL send-sms/resources/teasdf
WARNING: <0> Installation Problem??? Couldn't load messages: Can't find bundle for base name org.apache.xmlbeans.impl.regex.message, locale en_US
at com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper.createEntry(WsdlEntryHelper.java:644)
at com.bea.wli.sb.resources.wsdl.helpers.WsdlEntryHelper.createEntry(WsdlEntryHelper.java:687)
at com.bea.wli.sb.management.configuration.WsdlConfiguration.createEntry(WsdlConfiguration.java:64)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.alsb.console.support.ConsoleSideMBeanInvocationHandler.__invoke(ConsoleSideMBeanInvocationHandler.java:113)
at com.bea.alsb.console.support.ConsoleSideMBeanInvocationHandler.invoke(ConsoleSideMBeanInvocationHandler.java:71)
at $Proxy187.createEntry(Unknown Source)
at com.bea.alsb.console.resources.wsdl.WsdlRepositoryHelper.createEntry(WsdlRepositoryHelper.java:183)
at com.bea.alsb.console.resources.wsdl.actions.EditWsdlAction.execute(EditWsdlAction.java:88)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
I couldn't find anything related to this error in this forum or the web.
Thank you in advance,
Daniel.

Can you post your WSDL here please.

WINDOWS INSTALLER PROBLEM WITH DESKTOP MANAGER

Please help!! I am a user of the Blackberry Desk Top Manager, running under Windows XP Service Pack 4.5. I recently downloaded the latest version of Desk Top Manager and I am getting the following error: - Flashing intermittently, whilst running the newly downloaded Desktop Manager - "Windows Installer Preparing to Install". I have removed the programme, downloaded it again from Blackberry's website and run my Windows updates to no available. I have now been advised that I must format my entire computer and reload Windows, which seems to be a rather onerous solution, as I have been using Blackberry's Synchronisation Programme for over a year successfully before this took place. I should appreciate it if you would let me know how this problem on my IBM Think Pad Laptop can be cured.

halimsujanto wrote:
Hi all..
I am having the same problem with desktop software 6, but my problem is more like this..
http://www.blackberry.com/btsc/KB19300
The Windows Installer pop-up during installation and cannot continue, it seems that windows installer 4.5 is the cause, but I cannot uninstall windows installer 4.5 because many of my programs were using this..
In this knowledge base solution it says to run BlackBerry Desktop Software.msi, but on BlackBerry Desktop Software 6, it need to run from setup.exe and cannot continue.. so I cannot install desktop software 6 on my computer, but I am able to install older version desktop software ie. version 4.2 to version 5.
I think that I am gonna reply here instead of making new thread about windows installer 4.5 and Desktop Software 6, please move if I did wrong.
PS. Bifocals..
The link you provided is missing. Or it just back to BlackBerry Technical Solution Center page and I tried searching the KB13781 with no success.
Please if there is other link that may be good for my problem.
Thank you very much.
Hi ihalimsujanto and welcome to the forums!
My first concern is that you do have a version of desktop manager that you can maintain your device and PIM data with, do you?
Please post back with as much detail as possible regarding your hardware and software setup.
Also post what steps you have taken to resolve the issue. The more detail we have the better we can help you. I'll reread KB 19300 and find what happened to my broken link.
Thanks.
Bifocals
EDIT:
ihalimsujanto,
Please review this Microsoft Knowledgebase Article ID: 555175
How to resolve Common "Windows Installer" Problems
Methods 3 and 4 may be pertinent.
Let us know how it goes!
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Installation problem on Intel

I have tried to install Solaris 8 on my Dell machine.
I have tried to boot both directly via CD and by using Device Configuration Assistant on a floppy..
The first screen says this....
SunOS Secondary Boot version 3.00
WARNING: ACPI Tables not in Reclaim Memory
prom_panic: kmem_free block already free
Entering boot debugger:
[130ee5]:
and when i hit enter and choose c (continue execution), the m/c hangs and asks me to push ctrl-alt-del to reboot..
I don't know what the ACPI tables are .. and how i can fix this...
Anyone who knows this... please help..
Thanx a lot..

I have heard about the ACPI that may be a Power Managemnet Tools or something, it always be found in Microsoft Window 2000 Device Manager, sorry I can't help you to solve the problems.....because I also have some installation problem on my Intel paltform @_@.

Installation Problem on iTunes 6.0.1.3 - HpSdpAppCoreApp

Help!
I'm trying to install the new iTunes 6.0 and I'm getting a message during installation that says
HpSdpAppCoreApp
"The feature you are trying to use in on a network resource that is unavailable.
Click OK to try again, or enter an alternative pathway to a folder containing the installation package "HpSdpAppCoreApp.msi" in the box below."
The last time I dug through some files on my own, bad things happened.
Thanks,
C

good gracious, Chris ...
okay, try applying the general advice on installation problems given here:
http://docs.info.apple.com/article.html?artnum=93976
... and the InstallShield Tips and Pointers are also helpful with these less-well-documented errors:
http://consumer.installshield.com/faq.asp#ts
keep us posted.
love, b

Installation problem on SUSE 12.1

Hi
I'm a Linux beginner and I am trying to install LV on SUSE 12.1
I've also posted my problems on Lava:
http://lavag.org/topic/15240-labview-installation-problem-on-suse-121/
The installation started and it looks quite all right, but when I try to start LabVIEW, the application just sits in the taskbar for about 20 seconds and then just disappears.
Any ideas?
Is there a way to debug to see what's going on?
Cheers,
Mike
Solved!
Go to Solution.

Hi Mike,
Unfortunately, there are no versions of LabVIEW supported on SUSE 12.1 at present. Here's a link to LabVIEW version compatibility with different Linux distributions. I saw from your other forum that you're attempting to install LabVIEW 2009, which is certified for SUSE 11.0 at the latest.
Best,
Dan N
Applications Engineer
National Instruments

Installation Problem on Win8

Hello all
I need your help for troubleshooting an installation problem on a Win8 (x64) client. There is already JavaJRE installed, but we wanted to install some other versions, too. But it didn't work. So we tried to unistall to curently version. This was running badly. Now there entry is removed from windows software, but the software is still on the system. Always if we try to install any java, we get a failure message with no error discription. So we looked for some installation logs, but I can't find the problem. Can you have a look? What can I do?
Thank you guys for your support.
Installation Logs:
java_install.log - Pastebin.com
java_install_reg.log - Pastebin.com
JavaDeployReg.log - Pastebin.com

Hi people!
I have two problems with nokia suite...
first of all I can't install it at my windows 8.1, I receive the message attached...
Second,
in another notebook, all time I tried to update my N8 to Symbian bella I receive a blue screen of death, at windows 8
can somebody help me?
Attachments:
mokiasuit.png ‏13 KB

Installation problem on RHEL4 ..

Installation problem on RHEL4 (Red Hat Enterprise 4) i have
install start at unzip tar.gz and tar -xf .... now i have run
./installFMS it show
./fmsini: error while loading shared libraries: libstdc++.so.5:
cannot open shar
ed object file: No such file or directory
ERROR: Your are running the Macromedia Flash Media Server
installer
on the wrong platform.
it not support for fedora or anything else?
plz help....

would be nice if someone responded to this.... Macromedia
wouldn't have been this lax in giving a reply :) AND they keep up
with OS updates too :)

Xp_logininfo Installation problem

Hello gurus,
I'm facing the same problem as described in this link:
Re: xp_logininfo "Installation problem on windows 2003 with Sql 2005"
the error I get is similiar:
<i>The below message comes from executing the command master..xp_logininfo '<domain>\<user> ' Msg 15404, Level 16, State 11, Procedure xp_logininfo, Line 62 Could not obtain information about Windows NT group/user '<domain>\<user> ', error code 0x534. The statement has been terminated</i>
but I just don't get how to solve it.
-I've tried to use the profiler but didn't find any information that will help me to solve.
-One of the guys wrote to add "logon rights" to the user ... what does it mean ?
Please advice,
Dimitry Haritonov

Hi sven,
Thank you very much for the quick and direct answer.
The problem was that the user that runs the SQL SERVER service didn't have authorization to retrieve information from active directory.
I've changed the service user, run the sapinst again, and after it succeeded I've returned the previous user.
Best regards,
Dimitry Haritonov

Oracle database 11g release 2 installation problem on windows 7 (64-bit)

First of all my windows is not genuine, but on my friend's desktop oracle download and installation worked fine, he chose "create and configure database" options, and it works very well on his desktop, though his windows is also illegitimate. In my case, when I select "Create and configure database" option and pressed 'next",
(Go to my blog to see it with snapshots: Computer Science: Oracle database 11g release 2 installation problem on windows 7 (64-bit))
it asks to select class, I select "Desktop class" and pressed "next". The moment I pressed "next", the whole setup thing disappeared like it was never started. I searched for all possible reasons for why its not getting installed on my laptop, I used registry cleaner s/w, deleted 25 GB of data to create free space if it were the problem, increased the virtual memory to increase the space for RAM, I did almost everything to get this setup working, but I found no success with the "Create and Configure database" option
and
then
I chose a "database software only" option and chose to store in a folder w/o spaces. This way, I got database s/w only and then later I found "Database configuration Assistant (DBCA)" from windows START button and clicked to create and configure database manually. The steps are pretty much interactive and doesn't involve much brainstorming.
The values I filled for
1) Global Database Name : orcl
2) System Identifier : orcl
3) I chose common password for both SYS and SYSTEM
4) while on Enterprise Manager Configuration step, It asked me to create and configure listener in oracle home, so for that too, I typed "netca" in windows START menu and clicked it. There I added a listener.
5) I chose a Storage area which was the Oracle-home itself i.e. where our installation files goes , in my case it is : C:\oracle_base\product\11.2.0\dbhome_1\oradata
6) Then after few more nitty-gritty clicks, we are set to go !
Finally to write SQL code and to create your first TABLE , type "sqlplus" in windows "START" menu and click it when it appears. A command-prompt like window appears , which will ask you for username and password, so here they are :
Username : sys/ as sysdba
Password : (its the one you created in step 3 stated above )
After this you are ready to write your first SQL command.

Is this your solution to your original post at Oracle database 11g release 2 installation on windows 7 (64-bit) ?
Pl be aware that you should not create any custom objects in SYS or SYSTEM schema - you should create any such objects in a separate custom schema.
About Database Administrator Security and Privileges

Lightroom 3.2 Installation Problem on Windows 7 64-bit

Lightroom 3.2 Installation Problem on Windows 7 64-bit
I can't install Lightroom 3.2 (German) on my computer (Windows 7 Professional 64-bit).
While copying the extracted program files the following error message appears:
An error occurred during the installation of assembly component {6435B7C0-E0C8-3EA2-91AE-7640034EAFCE}. HRESULT: 0x80070002.
I found out that other users had the same problem, and couldn't find a solution.
Perhaps it is a Microsoft .NET Framework related problem. But after installing .NET Framework 4 nothing changed.
Thanks for ideas to solve the problem.

Thanks for your advice, Mr. McLion.
I downloaded the 3.4.1 version and started the installation as administrator. Unfortunately the same error message occured again.
Then I tried to install the 32-bit version (although I prefer a 64-bit program on a 64-bit operating system). A similar error message appeared at the same point of installation progress, but with another combination of numbers and letters in brackets.

Installation problem for Java EE 5 SDK Update 2

Hi ,
I have jdk1.5.0_12 (J2SE) installed on my Windows XP. Now i am trying to install J2EE on my machine.I tried to install it twice but it comes to a halt after completing 45% at the same jar file. Following is the link which shows it comes to a halt.
http://img141.imageshack.us/my.php?image=j2eeinstallhangupav8.png
Also I wanted to know if I uninstall the J2SE and then install only J2EE will that be fine.Because I believe J2EE is a superset of J2SE ?
Thanks in advance.

For the difference between Java EE and Java SE read here:
http://java.sun.com/javaee/5/docs/firstcup/doc/p3.html
For the installation problem, I don�t know how to help you... maybe here you can find some ideas:
http://forum.java.sun.com/thread.jspa?threadID=738559
Andrea

PPStream installation problem on Windows 7

I just recently install bootcamp and use bootcamp to install windows 7 pro. Everything seems fine until i download PPStream and install it. The installation process was smooth just like usual. However, when it finishes installing, it asked me if i wanna open the PPStream. and i said yes. guess what, nothing happened, then the PPStream icon on desktop is not a normal app icon, it's like a unknown file icon with the reflash arrow on the bottom right corner.
I thought it might be the installation problem, then i went into Control Panel and uninstall the app, and reinstall PPStream, the same thing happened, and every time i click the PPStream icon on desktop, windows explorer stopped working. Anyone knows what's going on or got experience like this before? i will appreciate for any input. thanks

很简单。你子安装的过程中。看一下安装的目录。默认是安装在苹果的系统盘里的。而这个盘是只读的。所以管理器会崩溃。只要改到c盘的目录就可以了。
very easy, reinstall pps. when install pps directory change e : drive ---- to c: drive ... you area set to watch

MinSAP Basis installation problem

Similar Messages

Maybe you are looking for