Minus sign with vbrp-netwr

Dear all,
In my sapscript is retrieved vbrp-netwr. However, the minus sign is not displayed. How to proceed?
Regards.

hi,
in VBRP u wont have the NETWR as minus value... we need to modify this( multiply this value with -1 ex
VBRK-NETWR = VBRK-NETWR * -1.
<b>To identify whether we need to modify or not... we have to look at another field i.e VBRP-SHKZG this will indicate return item...</b>
my suggestion is to take the NETWR from item level i.e from VBRP.. then check whether the item return item or not.
<b>if VBRP-SHKZG is not initial then multyply with -1.</b>
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K

Similar Messages

How to get a minus sign with the cost field in ALV.

Hi ,
How to get a minus sign with the cost field in ALV.
The Ouput will be displayed like Rs -1500 instead of 1500-
I can't use concatenate also as i may have to use the sum functionality of ALV .
Cheers
Sunny

Hi sunny,
1. The OTHER FIELD
has to be character field of say length 15.
2. Write the original numeric value to
this character field (in a loop)
3. But simply writing won't help.
4. use this kind of logic.
5.
REPORT abc.
DATA : m TYPE i.
DATA : chr(15) TYPE c.
m = -100.
WRITE m TO chr.
IF m < 0.
SHIFT chr RIGHT BY 1 PLACES.
CONDENSE chr.
CONCATENATE '-' chr INTO chr.
ENDIF.
WRITE chr.
regards,
amit m.

Auto-replace two minus signs with a proper dash

I wish Keynote would offer to do this! I've been cutting-and-pasting them into K06. K08 now offers a space to enter personal auto-replace 'requests', but putting "--" into the first column and a cut-and-paste dash (from--hold your breath--MS Word) doesn't work.
Any hints, please?
Thanks

I'm really happy to have learned the "Option + -" dash: as that produces exactly what I'm looking for and it takes no more keystrokes than "--" to produce, this is solved without fussing with auto-correct.
Thank you!

I increased my font with zoom for the first time & got it too large. It will not decrease using Control & minus sign.

I use Firefox 4. Windows XP. I have tremors & must have accidentally clicked on something that made it open up with weird colors like it was in safe mode. It was in 8-bit so put it back on 32-bit and 1280 x 1024 pixels. Then the font was so small it is almost unreadable. Tried to change it in Firefox Tools, Options, & Content. This did not work. I then used Zoom after checking in Help but got the font so large I can't view my email right. It will not decrease when trying Control with the minus sign as suggested.

Did you change the resolution in Control Panel > Display ?
What is the native resolution of your video display (monitor)?

HT5137 I updated to ios7.0.2, when I double click on home button it brings up an app list but when I hold my finger on an icon it won't show any with a minus sign, is it no longer necessary to close apps?

In ios 7.0.2, when you double click the home button it brings up the icons but won't allow you to show them with minus signs, is it no longer necessary to do this?

jim96776 wrote:
is it no longer necessary to do this?
It was never necessary except in certain unusual circumstances.

HT5137 Words with Friends has frozen. After double clicking the home button, swiping or pressing the icon does not bring up the minus sign.

On my IPad Words With Friends has frozen. I have double clicked on the home button and identified the WWF icon. When I press and hold or swipe vertically the icon darkens but does not shake or bring up the minus sign. Any suggestions?

Force close apps
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
http://support.apple.com/kb/ht5137

When to export a numbers file to csv the minus signs don't work with R

Friends,
I have trouble getting the statistic program R to read my exported CSV-files from Numbers.
The minus sign doesn't work, R reads it as a factoric input rather than numeric.
Does anyone have a tip how to reformat this?
Jocke

Wayne, actually, I'm not sure but I think that factoric - or factorial is the denomination that R uses to say that somthing is rather a text than a numeric number - I'm pretty new to R.
But, anyway, we solved the problem but in a lillte bit of an awkward way.
The problem is that the minus sugns in numbers is percieved as dashes in R
(http://www.R-project.org, a free-ware statistical analysis program)
So where there is a numeric input with a minus sign R thinks it is a letter rather than a number.
We solved it by exporting the numbers file to CSV, opened it in text editor, copied the suspisios minus sign and pasted it into the search field to find all dashes/minus sign that didn't work and replaced them with a minus sign. After this operation, nothing different could be seen in the text but R saw the difference.
So this makes it difficult to explain by posting a screenshot - it looks the same but it isn't.
The funny thing is that the dashes that numbers use when to express a date are percieved as minus signs by R.
Can anyone understand what I tried to explain? And if so, is there a simpler way to do this? We have a lot of minus signs to export to R.....
best regard
Joachim

HFM 9.3 - FR Studio - can't format negative numbers with minus sign prefix?

How can negative numbers on an account balance report be made to appear with a leading minus sign??
This is a necessary requirement for generating an export file for loading to our new Tax software, but does not appear to be a format option.

Have you tried going into Format Cells - Number - Negative Number Symbols - and typing a minus sign in the prefix box?

Sales order with a minus-signs

Hi Experts,
I am trying to creat a sales order in SCM 5.0 with the '/SAPAPO/SJKTST04' program, but this is generated (and shown in the Planning Book (/SAPAPO/SNP94)) with a minus-sign, that should not be so.
Someone pleas help me with this!
Thanks a lot in advance for your answers!!
Best Regards,
Hristina Ivanova
Edited by: Hristina Ivanova on Apr 8, 2008 7:36 PM

Hi Bijal,
The Problem is in the minus sign. I don't want this, but every time, when i create a sales order with the '/SAPAPO/SJKTST04' program, the sales order is automatically generated (and shown in the Planning Book SNP94) with a minus-sign, although i didn't input any signs !
The Problem occur in SCM APO 5.0. I have´t that Issue in SCM APO 4.1.
Can somebody help me to solve the problem? Have someone idea, where from does the minus sign came, or is it any program/system error available? Do you have a solution-suggestion?
Thanks a lot in advance!!
Best Regards,
Hristina Ivanova

Having trouble with Red minus signs on folders shared to my computer

Here's the situation as best as I can describe it.
We are working on 2 imacs. iMac A as a 1TB harddrive attached to it via USB that has all the folders on it that we use to work. iMac B is connected to A wirelessly and can "usually" access the contents of the harddrive through A with no problems. However, every once in a while I click a folder on the harddrive and I get access (I'm on iMac B) to that folder but the subfolder inside that I need to access (the others are fine) has a red minus sign on it which is infuriating. So far the only way we've been able to re-grant access to the folder for me is to either restart my computer or unplug and replug the harddrive into iMac A.
Steps we have taken:
Added full "read & write" permissions to both computers and users on both the folder, the sub folder, and the harddrive itself
Attempted to set up additional users to access the folder differently
Checked and unchecked "ignore ownership" on all of the above access points
We find it strange that it's only sometimes I get locked out of the folder and other times I'm not. It has to be some sort of glitch unless there's some sort of setting that locks me out if I make too many changes to the contents in that specific folder. Any ideas or help would be greatly appreciated.

The procedure below will reset the permissions of a home folder in OS X 10.7.4 or later. If you're running an earlier version of 10.7, update to the latest version first. This procedure should not be used in OS X versions older than 10.7.4.
Back up all data before you begin.
Step 1
Click the Finder icon in the Dock. A Finder window will open.
Step 2
Press the following key combinations, in the order given:
Command-3
Shift-command-H
Command-I
The Info window of your home folder will open.
Step 3
Click the lock icon in the lower right corner and authenticate with the name and login password of an administrator on the system. If you have only one user account, you are the administrator.
Step 4
In the Sharing & Permissions section of the window, verify that you have "Read & Write" privileges. If not, use the "+" and "-" buttons in the lower left corner to make the necessary changes.
Step 5
By default, the groups "staff" and "everyone" have "Read Only" privileges. With those settings, the files at the top level of your home folder will be readable by other local users. You can change the privileges to "No Access" if you wish, but then your Public and Drop Box folders will be inaccessible to others, and Personal Web Sharing won't work. Most likely, you don't need to change these settings.
Step 6
If there are entries in the Sharing & Permissions list for users or groups besides "me," "staff," and "everyone," delete them.
Step 7
Click the gear icon at the bottom of the Info window and select Apply to enclosed items... from the drop-down menu. Confirm. The operation may take several minutes to complete. When it does, close the Info window.

Quantity should populate with minus sign.

Hi All,
I want to populate GR quantity for mat doc with minus value if movement type is 102 or someother.
I want to write a routine in transformations.
So how can I?

Hi Baazi,
You can maintain the minus sign in characteristic routine of transformation.
Map. movement type and GR quanity from source to GR quanityt of target
if source_fields-movement_type = '102'.
result = GR quantity * -1.
else
result = GR Quantity.
endif.
-- Selva

What do red circles with minus sign mean?

Just set up time machine on my new Mac Pro, and on the first backup it made, several of the folders have red circles with a minus sign in them on the backups. When I try to open them off the backup it tells me I don't have permission. I am the only user. I use TM on my Macbook, and have never seen this happen.
It seems I can "enter time machine" and restore the files in those folders if I need to, but I'm wondering why I can't just directly open them off the disk.
Doesn't seem this is normal, and am wondering if "repair permissions" will do anything.

Whitecity wrote:
Time and time again I see people messing up tm backups because this isn't at all obvious, and it is easy to use the wrong (finder) interface to get to tm backups. It would be nice if Apple put the TM into something like an app bundle that launched the star wars interface to make it obvious that it was different from a normal folder.
Or just put up some sort of warning (because on rare occasions, an "in.Progress" package needs to be deleted, or when the backups are corrupted and all else has failed, copying via the Finder may recover some data, as a last resort).
But don't hesitate to make that known here (as many of us have done): http://www.apple.com/feedback/timemachine.html

Accordian panel with plus and minus signs to indicate state of panel

I want the text to show [+] next to the title of the panel when it is collapsed and [-] when it is expanded
just like http://www.reddit.com/r/indesign/comments/1jewqq/custom_kerning_applied_to_a_single_charac ter/
the comments on this page can be expanded or collapsed by clicking the plus or minus sign
how do i do this?

I've started filling the accordion with my content and the
cookie works fine. But I see some things I'd like to have changed
if possible?
a) When I load the page all accordion panels flips open at
the same time and they stay open until the page has loaded. It's
probably not visible in the demo because it's only a few bytes to
load there. After the page has loaded the cookied panel stays open
and the rest of the panels close. Is it possible to hide the
loading of the panels somehow? This is kinda messy right now.
b) I'd like to use the cookie to control the panels but only
during the current session. When a new session occurs I'd like to
start with all panels closed a) (or use the script that states
default panel). The standard accordion use a small script to set
the default open panel. I tried modifying this script but it looks
like the accordion is following the laws of the cookie and is now
ignoring this script.
Panel 4 set to be default (0, 1, 2, 3):
<script type="text/javascript">
var Accordion1 = new
Spry.Widget.Accordion.prototype("Accordion3");
</script>

Issue with Minus sign in ALV

Hi,
I have a report program where the prices will be getting displayed. In the out put the last four fields of ALV is having values -235.52; -145.25; -457.25; -417.25. In the foreground execution, the output is proper. But in the background(spool), the same output is getting displayed as 235.52;145.25;-457.25;-417.25.
The first two values 235.52 and 145.25 are getting displayed with out minus sign.
Note: All the above fields are of same data type.
What could be the possible issue here? Please provide your valuable inputs.
Thanks,
Viswanath A

Hi, Below is the fieldcatalog code and is common for all 4 fields.
WHEN 'CPP_FKBTR'.
        wa_fieldcat-col_pos              = 40.
        wa_fieldcat-seltext_l            = 'Commitment for past period'.
        wa_fieldcat-seltext_m            = 'Com past per'.
        wa_fieldcat-reptext_ddic         = 'Commitment past period'.
        wa_fieldcat-ddictxt   = 'L'.
        wa_fieldcat-no_out   = 'X'.
        MODIFY lv_fieldcat FROM wa_fieldcat.
Thanks

I want an app to close or browse through open apps at the same time by double tapping the home button i can find the open apps with the minus sign on it and dont move

I want an app to close or browse through open apps at the same time by double tapping the home button i can find the open apps with the minus sign on it and dont move

Try a reset: Press the Sleep/Wake button and the Home button at the same time for ten seconds until the Apple logo appears. Note: No data will be lost

Minus sign with vbrp-netwr

Similar Messages

Maybe you are looking for