Minutes
ive been with verizon for about a year and half and am very fusterated with all my over the limits on every thing why cant verizon have like roll over minutes like cingular had i when over last month and i was charged 80.00 some dollers in overages but the months before i never even came close too going over i think it is just a way for a corp giant too make there pockets fatter i think it is unfair and the air time that we r limited on on our air cards is really **bleep** 5100 mb dang i can use that up in 1 week at my bussiness my plan should be only costing me 240.00 a month and with my overages im paying nearly 300. too 400 a month think i may take my biss too some other carrier i may be treated more fairly and get more bang for my buck witmer trucking .
If your usage is very inconsistent (sounds like it is), then perhaps Verizon's plans are NOT the best fit for you, and AT&T's rollover would work better.
If you can predict or anticipate months with higher usage, you can change your plan to cover the expected increase or decrease for that particular month. Then switch back to a lower monthly allowance when your usage drops off. That will take some planning an d effort on your part to manage your account, and as I said earlier, perhaps a rollover plan would be a better fit. Maybe even pre-paid would work in your situation.
It might be interesting to take a survey and see how much usage varies from month to month. Ours is pretty consistent, and Verizon plans work for us. Obviously, not everyone is the same....you need to find the company and plan that best suits yours needs.
Similar Messages
-
User must wait several minutes before NEW opportunity shows up in report
When a user creates an opportunity, they will then add product revenue to it. After that, they need to run a report of the opportunity and send the quote to the customer.
The report will prompt for the opportunity name and then retrieve the formatted quote form.
The issue is, after the opportunity is created and product revenue added, when the user tries to run the report, the data selection will not display the opportunity. The opportunity will not show up until after the user logs out and then back into CRMOD.
EDIT: The log out/in portion was just a coincidence and plays into a delay in some sort of background processing problem.
If the user just waits , up 15 to 20 minutes in some cases, the opportunities will show up in the list. Sometimes, they appear very quickly, other times it take a very long time.
I am surmising that this has to do with some sort of business function that runs in the background, and being a shared system, there is a backlog in the processing. Similar to the wait queue for data imports.
Is this normal behavior?
Edited by: nsidev on Aug 28, 2009 1:59 PMHi, I think the problem is with the drop down prompt not getting refreshed with newly added opportunities, otherwise with the direct reports clicking the "rerfresh" link brings the newly created opportunity. The problem also doesnt seem to happen if the prompt is of type "Browse through choices and/or type in directly "
-- Venky CRMIT -
I have firefox 6.02. It started crashing on my desktop several days ago after the update. It started crashing on my laptop yesterday, a few days after the update. I have Windows XP on my desktop and Windows 7 on my laptop. Both are HP. I upgraded to the 7.0 beta today but it is still crashing on both computers. The crashes are happening every few minutes. McAfee has not found anything. Please help. I am ready to switch to chrome.
Application Basics
Name
Firefox
Version
7.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:7.0) Gecko/20100101 Firefox/7.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.911
true
[email protected]
Download Statusbar
0.9.8
true
{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
DownloadHelper
4.9.5
true
{b9db16a4-6edc-47ec-a1f4-b86292ed211d}
Feedback
1.1.2
true
[email protected]
Greasemonkey
0.9.11
true
{e4a8a97b-f2ed-450b-b12d-ee082ba24781}
Java Quick Starter
1.0
true
[email protected]
McAfee SiteAdvisor
3.4.0
true
{4ED1F68A-5463-4931-9384-8FFF5ED91D92}
RealPlayer Browser Record Plugin
14.0.3
true
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Java Console
6.0.22
false
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
false
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
false
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
false
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
Yahoo! Toolbar
2.3.11.20110727115843
false
{635abd67-4fe9-1b23-4f01-e679fa7484c1}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.centurylink.net/
browser.startup.homepage_override.buildID
20110908135051
browser.startup.homepage_override.mstone
rv:7.0
extensions.lastAppVersion
7.0
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729)
gfx.blacklist.layers.direct3d9
2
keyword.URL
http://search.yahoo.com/search?fr=mcafee&p=
network.cookie.prefsMigrated
true
network.http.proxy.version
1.0
places.database.lastMaintenance
1315870617
places.history.expiration.transient_current_max_pages
20100
places.last_vacuum
1297306180
print.print_printer
HP Photosmart 2570 series
print.printer_HP_Photosmart_2570_series.print_bgcolor
false
print.printer_HP_Photosmart_2570_series.print_bgimages
false
print.printer_HP_Photosmart_2570_series.print_command
print.printer_HP_Photosmart_2570_series.print_downloadfonts
false
print.printer_HP_Photosmart_2570_series.print_edge_bottom
0
print.printer_HP_Photosmart_2570_series.print_edge_left
0
print.printer_HP_Photosmart_2570_series.print_edge_right
0
print.printer_HP_Photosmart_2570_series.print_edge_top
0
print.printer_HP_Photosmart_2570_series.print_evenpages
true
print.printer_HP_Photosmart_2570_series.print_footercenter
print.printer_HP_Photosmart_2570_series.print_footerleft
&PT
print.printer_HP_Photosmart_2570_series.print_footerright
&D
print.printer_HP_Photosmart_2570_series.print_headercenter
print.printer_HP_Photosmart_2570_series.print_headerleft
&T
print.printer_HP_Photosmart_2570_series.print_headerright
&U
print.printer_HP_Photosmart_2570_series.print_in_color
true
print.printer_HP_Photosmart_2570_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_2570_series.print_margin_left
0.5
print.printer_HP_Photosmart_2570_series.print_margin_right
0.5
print.printer_HP_Photosmart_2570_series.print_margin_top
0.5
print.printer_HP_Photosmart_2570_series.print_oddpages
true
print.printer_HP_Photosmart_2570_series.print_orientation
0
print.printer_HP_Photosmart_2570_series.print_page_delay
50
print.printer_HP_Photosmart_2570_series.print_pagedelay
500
print.printer_HP_Photosmart_2570_series.print_paper_data
1
print.printer_HP_Photosmart_2570_series.print_paper_height
11.00
print.printer_HP_Photosmart_2570_series.print_paper_size_type
0
print.printer_HP_Photosmart_2570_series.print_paper_size_unit
0
print.printer_HP_Photosmart_2570_series.print_paper_width
8.50
print.printer_HP_Photosmart_2570_series.print_reversed
false
print.printer_HP_Photosmart_2570_series.print_scaling
1.00
print.printer_HP_Photosmart_2570_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_2570_series.print_to_file
false
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_top
0
privacy.cpd.cache
false
privacy.cpd.cookies
false
privacy.cpd.formdata
false
privacy.cpd.sessions
false
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
security.enable_ssl2
true
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce 6150 LE
Vendor ID
10de
Device ID
0241
Adapter RAM
Unknown
Adapter Drivers
nv4_disp
Driver Version
8.2.0.5
Driver Date
1-24-2006
WebGL Renderer
Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.686)
GPU Accelerated Windows
0/1. Blocked for your graphics driver version.I have firefox 6.02. It started crashing on my desktop several days ago after the update. It started crashing on my laptop yesterday, a few days after the update. I have Windows XP on my desktop and Windows 7 on my laptop. Both are HP. I upgraded to the 7.0 beta today but it is still crashing on both computers. The crashes are happening every few minutes. McAfee has not found anything. Please help. I am ready to switch to chrome.
Application Basics
Name
Firefox
Version
7.0
User Agent
Mozilla/5.0 (Windows NT 5.1; rv:7.0) Gecko/20100101 Firefox/7.0
Profile Directory
Open Containing Folder
Enabled Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Better Facebook!
5.911
true
[email protected]
Download Statusbar
0.9.8
true
{D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
DownloadHelper
4.9.5
true
{b9db16a4-6edc-47ec-a1f4-b86292ed211d}
Feedback
1.1.2
true
[email protected]
Greasemonkey
0.9.11
true
{e4a8a97b-f2ed-450b-b12d-ee082ba24781}
Java Quick Starter
1.0
true
[email protected]
McAfee SiteAdvisor
3.4.0
true
{4ED1F68A-5463-4931-9384-8FFF5ED91D92}
RealPlayer Browser Record Plugin
14.0.3
true
{ABDE892B-13A8-4d1b-88E6-365A6E755758}
Java Console
6.0.22
false
{CAFEEFAC-0016-0000-0022-ABCDEFFEDCBA}
Java Console
6.0.23
false
{CAFEEFAC-0016-0000-0023-ABCDEFFEDCBA}
Java Console
6.0.24
false
{CAFEEFAC-0016-0000-0024-ABCDEFFEDCBA}
Java Console
6.0.26
false
{CAFEEFAC-0016-0000-0026-ABCDEFFEDCBA}
Microsoft .NET Framework Assistant
1.2.1
false
{20a82645-c095-46ed-80e3-08825760534b}
Yahoo! Toolbar
2.3.11.20110727115843
false
{635abd67-4fe9-1b23-4f01-e679fa7484c1}
Modified Preferences
Name
Value
browser.places.smartBookmarksVersion
2
browser.startup.homepage
http://www.centurylink.net/
browser.startup.homepage_override.buildID
20110908135051
browser.startup.homepage_override.mstone
rv:7.0
extensions.lastAppVersion
7.0
general.useragent.extra.microsoftdotnet
( .NET CLR 3.5.30729)
gfx.blacklist.layers.direct3d9
2
keyword.URL
http://search.yahoo.com/search?fr=mcafee&p=
network.cookie.prefsMigrated
true
network.http.proxy.version
1.0
places.database.lastMaintenance
1315870617
places.history.expiration.transient_current_max_pages
20100
places.last_vacuum
1297306180
print.print_printer
HP Photosmart 2570 series
print.printer_HP_Photosmart_2570_series.print_bgcolor
false
print.printer_HP_Photosmart_2570_series.print_bgimages
false
print.printer_HP_Photosmart_2570_series.print_command
print.printer_HP_Photosmart_2570_series.print_downloadfonts
false
print.printer_HP_Photosmart_2570_series.print_edge_bottom
0
print.printer_HP_Photosmart_2570_series.print_edge_left
0
print.printer_HP_Photosmart_2570_series.print_edge_right
0
print.printer_HP_Photosmart_2570_series.print_edge_top
0
print.printer_HP_Photosmart_2570_series.print_evenpages
true
print.printer_HP_Photosmart_2570_series.print_footercenter
print.printer_HP_Photosmart_2570_series.print_footerleft
&PT
print.printer_HP_Photosmart_2570_series.print_footerright
&D
print.printer_HP_Photosmart_2570_series.print_headercenter
print.printer_HP_Photosmart_2570_series.print_headerleft
&T
print.printer_HP_Photosmart_2570_series.print_headerright
&U
print.printer_HP_Photosmart_2570_series.print_in_color
true
print.printer_HP_Photosmart_2570_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_2570_series.print_margin_left
0.5
print.printer_HP_Photosmart_2570_series.print_margin_right
0.5
print.printer_HP_Photosmart_2570_series.print_margin_top
0.5
print.printer_HP_Photosmart_2570_series.print_oddpages
true
print.printer_HP_Photosmart_2570_series.print_orientation
0
print.printer_HP_Photosmart_2570_series.print_page_delay
50
print.printer_HP_Photosmart_2570_series.print_pagedelay
500
print.printer_HP_Photosmart_2570_series.print_paper_data
1
print.printer_HP_Photosmart_2570_series.print_paper_height
11.00
print.printer_HP_Photosmart_2570_series.print_paper_size_type
0
print.printer_HP_Photosmart_2570_series.print_paper_size_unit
0
print.printer_HP_Photosmart_2570_series.print_paper_width
8.50
print.printer_HP_Photosmart_2570_series.print_reversed
false
print.printer_HP_Photosmart_2570_series.print_scaling
1.00
print.printer_HP_Photosmart_2570_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_2570_series.print_to_file
false
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_2570_series.print_unwriteable_margin_top
0
privacy.cpd.cache
false
privacy.cpd.cookies
false
privacy.cpd.formdata
false
privacy.cpd.sessions
false
privacy.sanitize.migrateFx3Prefs
true
privacy.sanitize.timeSpan
0
security.enable_ssl2
true
security.warn_viewing_mixed
false
Graphics
Adapter Description
NVIDIA GeForce 6150 LE
Vendor ID
10de
Device ID
0241
Adapter RAM
Unknown
Adapter Drivers
nv4_disp
Driver Version
8.2.0.5
Driver Date
1-24-2006
WebGL Renderer
Google Inc. -- ANGLE -- OpenGL ES 2.0 (ANGLE 0.0.0.686)
GPU Accelerated Windows
0/1. Blocked for your graphics driver version. -
Interactive form takes 10-15 minutes to open and exhausts system resources.
The version of Livecycle designer am using is 7.1
The interactive form that I designed is taking like 10-15 minutes to open and while its opening, its taking all the system resources as I see a prompt on the task bar besides time/date "Virtual Memory Minimum Too Low".
The tutorial project works fine, the TravelRequest.pdf opens just fine: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/wdjava%20archive/offline%20interactive%20pdf%20form%20using%20download.pdf
Would installing version 8.0 solve this ?
I am on NWDS sp18.
Thanks
TonyHi,
Refer to the following blogs which explains the steps to improve the performance.
Offline Part u2013 I /people/sankar.narayana/blog/2008/12/23/dynamic-generation-of-offline-adobe-interactive-forms-for-sap-46c-and-ep-70-without-user-intervention-part-150-i
Offline Part u2013 II /people/sankar.narayana/blog/2008/12/30/dynamic-generation-of-offline-adobe-interactive-forms-for-sap-46c-and-ep-70-without-user-interventionpart-ii
Adobe Performance : /people/ramesh.kotagiri/blog/2008/12/30/sap146s-magic-solution-to-obtain-amazing-performance-of-dynamic-adobe-interactive-forms-using-zci-forms-zero-client-installation
Installing the Adobe 8.0 also improves the performance.
Thanks & Regards,
Jhansi Miryala -
Galaxy Note II Unresponsive for minutes at a time
I'm on my 3rd galaxy note 2. My first one had an overheating problem that caused the battery to last for 2 hours even though it was idle. They ended up replacing it for me. My 2nd one was actually perfect. I had zero problems with it for nearly a year until the day after the 4.3 update, the screen went off and never came back on. I just got my replacement about a week ago and I'm having an issue with the screen becoming unresponsive for minutes at a time.
I factory reset the phone yesterday thinking that maybe I had a rogue app installed but it seems that any time I try to launch a game or if I try to browse the internet while an app is updating, the phone is unusable for a few minutes. It's like it can't multitask. Eventually it'll come back with the phone at my home screen with my background image gone, but eventually it comes back too. It's similar to when windows explorer crashes and it reloads. I'll go through the same process for 2 or 3 more times before the game finally launches or the internet browser is finally usable.
Before I call this phone defective, I was wondering if it's a problem related to 4.3 that I should be aware of? I installed a monitor and it looks like with no apps open, from a fresh reboot my ram is 50-80% used which doesn't leave much room for opening apps or playing games. I even installed a virus protection and scanned for a virus (i know viruses on smartphones is a stretch) and it returned no issues.
Any ideas? I could factory reset it again, but I just did that last night and it didn't help still having the same problem with very minimal apps reinstalled. One note, I factory reset it with the restore from backup functionality turned off, so the apps I did install were from scratch, not my google account.I decided to call in. I tell the rep my problems and he tells me to launch the phone in safe mode. Done. I could reproduce the issue. It then says wifi unstable. The phone freezes with wifi on. Tells me to turn the wifi off. No more freezing while in safe mode, I guess wifi is the problem didn't think that was an issue before. He tells me that wifi issues have been reported but none of those issues cause the phone to freeze, he said that samsung told them to tell customers to turn that feature (ie: wifi) off until the next software update. He said samsung is working on a fix for the wifi issues but said there's no eta. I asked him for his gut feel and he said phones that are newer than 18 months normally get priority, given that the note 2 was release in november of 2012 and we're in 2014, that he estimated 3-4 months for the next update. I know I can't hold him to that but even if he's right, I have to leave wifi off for 3-4 months?...Now to the best part, "Since there is no freezing with wifi off in safe mode, and in safe mode the phone behaves in the state samsung designed it to be in, I've determined that it's not a hardware or operating system issue, so there's nothing I can do for you. I'm sorry I couldn't send you a new phone or resolve this problem for you, I hope you find a solution for the software issue you're having, good night."
Rather than get mad I realized I wouldn't get anywhere with him so I didn't try to push the issue. I know I have unlimited data so it's not that big of deal, but wouldn't you consider the phone not working regularly with wifi turned on a hardware or os system problem? It's not like I can uninstall and reinstall wifi. The drivers are embedded in the system and since it's a refurb phone, who's to say that the parts that were refurbed are really factory oem?
Now I'm stuck with a phone that is unusable randomly for 3-5 minutes using the phone normally with the mobile network/wifi because the agent didn't consider the problem to be hardware or os related and the only way to keep it from having issues is to not turn on wifi and keep the phone in factory default settings.
I'm not going to threaten to leave or go somewhere else because it would serve no purpose, maybe that's why there was no attempt made to help me other than saying no from the beginning of the conversation, but in my 15 years of being a loyal customer, you would think "i hope you find a solution on your own" would be after sending me a new device if the problem persisted. -
Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit -
IPhone 3GS doesn't recognise sim card. Status either says no sim or searching. If it does find network it's only for a minute or two?? Any ideas?
YEs sorry I should of said. I tried a different sim in my phone and the same thing happened and tried my si
IN a different phone and it works ok. I've also tried restoring it to factory settings. -
I made a 3-minute movie with my iphone 4S. When I attempt to share it via email or message I get a message that says it is too long, that I should try to make a clip. Of course I had rather send the whole thing. What are the possibilities? I think my music and likely my videos and pictures are in the cloud.
SadisticIron wrote:
i just baught my first iphone and it is a jalbroken
Buzz! Thank you for playing!
Discussing jailbroken devices is forbidden here by the Terms of Service.
You can not get help here. -
Did you know that verizon charges ¢50 for calls from the US to Canada? Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute. Amazing that they can charge this much for a call to Canada. I know they have it somewhere in their contract/website.
Did you know that verizon charges ¢50 for calls from the US to Canada? Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute. Amazing that they can charge this much for a call to Canada. I know they have it somewhere in their contract/website.
-
I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.
-
I have tried to look for an extension like Air Print Activator, which I tried and ignored. I thought it might have some timing method that would stop my copying and pasting and moving files after a minutes ot two. So I re-installed the latest version and "uninstalled" it, hoping it would then remove an errant extension. But that didn't help. It seemed to start when I first tried out Mail and moving new emails into their mailboxes after reading. I tried to figure out how to do a Clean Install, too, but it would not allow me to "move" the InstallESD.dmg to a USB disk, "resource busy". Everyway I turn, I'm blocked from carrying out a method of finding the culprit, short of starting from scratch -- but losing years and years of mail, files, receipts, etc. It's just too much to sacrifice. I have no idea what to do next, since I have no idea what extension is causing it or how to isolate and destroy it. Any suggestion would be much appreciated.
You can try repairing the boot drive, Since you are running OS 10.6.8 you will need the OS DVD. Do you have it?
Please post back if you do, and need directions on how to do the disk repair. -
How do I remove a download that keeps trying to download. Even when I click play it says it was downloaded from another computer and I am not authorized to play it, although it was actually purchased with the same apple id on my other computer. It has downloaded for the last two years every time i have opened up itunes. I remove it and then in ten minutes it starts downloading again, and interferes with my current purchases. please help
It may be a corrupt / damaged download.
If you live in a Region that allows re-downloading Music...
Delete the Song(s) and re-download...
See Here > Download Past Purchases > http://support.apple.com/kb/HT2519
If not... Contact iTunes Customer Service > Apple Support iTunes Store Contact Us -
Dispatcher dies after 1 minute
Hi,
I am on ERP2005 SR2, with Windows 2003 and MSSQL 2005 DB.
I have recently performed a database restore of the SAP database, but I am not able to restart SAP after this.
The dispatcher dies after about 1 minute. You will find the dev_disp and dev_w0 files below:
dev_disp file:
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid T01
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 83
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 4204
Thu Feb 08 09:02:37 2007
kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4204) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 83 successfully loaded
shared lib "dw_xtc.dll" version 83 successfully loaded
shared lib "dw_stl.dll" version 83 successfully loaded
shared lib "dw_gui.dll" version 83 successfully loaded
shared lib "dw_mdm.dll" version 83 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Feb 08 09:02:41 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5277]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapr3s_T01_00 <
DpShMCreate: sizeof(wp_adm) 11648 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000BDA0050, size: 5320400)
DpShMCreate: allocated sys_adm at 000000000BDA0050
DpShMCreate: allocated wp_adm at 000000000BDA1AB0
DpShMCreate: allocated tm_adm_list at 000000000BDA4830
DpShMCreate: allocated tm_adm at 000000000BDA4890
DpShMCreate: allocated wp_ca_adm at 000000000C217030
DpShMCreate: allocated appc_ca_adm at 000000000C21B680
DpShMCreate: allocated comm_adm at 000000000C21CDF0
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000C2A3A70
DpShMCreate: allocated gw_adm at 000000000C2A3AF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000C2A3B20
DpShMCreate: allocated wall_adm at 000000000C2A3B30
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
Thu Feb 08 09:02:42 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sapr3s) [dpxxdisp.c 11644]
DpStartStopMsg: send start message (myname is >sapr3s_T01_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 83
Release check o.K.
Thu Feb 08 09:03:22 2007
ERROR => W0 (pid 4732) died [dpxxdisp.c 14299]
ERROR => W1 (pid 2544) died [dpxxdisp.c 14299]
ERROR => W2 (pid 412) died [dpxxdisp.c 14299]
ERROR => W3 (pid 4944) died [dpxxdisp.c 14299]
ERROR => W4 (pid 2760) died [dpxxdisp.c 14299]
ERROR => W5 (pid 1004) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 4104) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2208) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 3300) died [dpxxdisp.c 14299]
ERROR => W9 (pid 3312) died [dpxxdisp.c 14299]
ERROR => W10 (pid 4412) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 4112) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 4336) died [dpxxdisp.c 14299]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:32 2007
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Feb 08 08:03:32 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4732 Ended no 1 0 0
1 DIA 2544 Ended no 1 0 0
2 DIA 412 Ended no 1 0 0
3 DIA 4944 Ended no 1 0 0
4 DIA 2760 Ended no 1 0 0
5 DIA 1004 Ended no 1 0 0
6 UPD 4104 Ended no 1 0 0
7 ENQ 2208 Ended no 1 0 0
8 BTC 3300 Ended no 1 0 0
9 BTC 3312 Ended no 1 0 0
10 BTC 4412 Ended no 1 0 0
11 SPO 4112 Ended no 1 0 0
12 UP2 4336 Ended no 1 0 0
Dispatcher Queue Statistics Thu Feb 08 08:03:32 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
5
5
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 6 ( 75%), shm 2 ( 25%)
since last update total 8, udp 6 ( 75%), shm 2 ( 25%)
Dump of tm_adm structure: Thu Feb 08 08:03:32 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Feb 08 08:03:32 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:37 2007
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >sapr3s_T01_00 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (2584) (SOFT_KILL)
Stop icman
killing process (4720) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:2584 HANDLE:516)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:38 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:2584 HANDLE:516)
wait for end of icman
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:39 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:40 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:41 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:42 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:43 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:44 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:45 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:46 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:47 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:48 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4720 HANDLE:528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=553
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Feb 08 09:03:49 2007
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4720 HANDLE:528)
DpStartStopMsg: send stop message (myname is >sapr3s_T01_00 <)
NiIMyHostName: hostname = 'sapr3s'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Thu Feb 08 09:03:50 2007
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11957]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 452 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 452 (pos=2)
SiSelNRemove: removed sock 452
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 452
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4204) [dpxxdisp.c 10317]
Good Bye .....
DEV_W0 file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu Feb 08 09:02:42 2007
B create_con (con_name=R/3)
B Loading DB library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll' is "700.08", patchlevel (0.81)
B New connection 0 created
M sysno 00
M sid T01
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 83
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 4732
M
M kernel runs with dp version 218(ext=109) (@(#) DPLIB-INT-VERSION-218)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 4732) [dpxxdisp.c 1301]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 11648 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5320400)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA4830
M DpShMCreate: allocated tm_adm at 000000000DDA4890
M DpShMCreate: allocated wp_ca_adm at 000000000E217030
M DpShMCreate: allocated appc_ca_adm at 000000000E21B680
M DpShMCreate: allocated comm_adm at 000000000E21CDF0
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A3A70
M DpShMCreate: allocated gw_adm at 000000000E2A3AF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A3B20
M DpShMCreate: allocated wall_adm at 000000000E2A3B30
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Thu Feb 08 09:02:43 2007
M ThInit: running on host sapr3s
M
M Thu Feb 08 09:02:44 2007
M calling db_connect ...
C Thread ID:2008
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'F:\usr\sap\T01\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 81
C patchcomment Connection check on (0,0) (988711)
C np:(local) connection used on SAPR3S
C CopyLocalParameters: dbuser is 't01'
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C Using Provider SQLNCLI
C OpenOledbConnection: MARS property was set successfully.
C ExecuteAndFlush return code: 0x80040e14 Stmt: [if user_name() != 't01' setuser 't01']
C sloledb.cpp [ExecuteAndFlush,line 6419]: Error/Message: (err 15157, sev 0), Setuser failed because of one of the following reasons: the database principal 't01' does not exist, its corresponding server principal does not have server access, this type of database principal cannot be impersonated, or you do not have permission.
C Procname: [ExecuteAndFlush - no proc]
C setuser 't01' failed -- connect terminated
C failed to establish conn. 0
B ***LOG BY2=> sql error 0 performing CON [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY0=> <message text not available> [dbsh#2 @ 1204] [dbsh 1204 ]
B ***LOG BY2=> sql error 0 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> <message text not available> [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10205]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server sapr3s_T01_00 on host sapr3s (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Feb 08 09:02:44 2007
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10404
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 4732) [dpnttool.c 327]
Please let me know what to do!
Best Regards,
ThomasHi!
Check that all enviroment variables are complete and still in place?
JAVA_HOME and DBMS_TYPE and so on
Also check that all exe files are of the same version, if not, make sure they are.
You could also try to update disp+work
rollo -
IMac G5 tries to start and dies after spinning cog for a minute
iMac G5 tries to start and dies after spinning cog for a minute
I did this;
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk.
the result was.
the 'permissions' are sometimes wrong, but they repair
the hard drive is either repaired or OK
the iMac will then restart and work fine and sometimes shut down and restart OK
after replacing the Hard Drive I actually thought I had fixed it and went to bed late but happy,
on waking in the morning, however I was not so happy it fired up and then died after dong -> apple logo -> spinning cog -> dead!!
I would be grateful for any help
Thanks
PeteHi Miriam,
Thanks yes,
here we go -- after running disc utilities it tells me directory OK and disk OK (or something like that) When I replaced the Hard Drive, I started 'fresh' erased/formatted the hard drive (new Seagate Barracuda 7200 500GB) and it has just got 'tiger' on it (and upgraded to whatever it is now I think I remember 4.11, I can't tell at the moment as I have got the back off) I didn't transfer any data I just took the old drive (Seagate 160GB) out and stuck the new one in.
I've just changed the battery (I didn't really think it would work, but I was still hopeful and I'd bought the battery anyway) I did the LED thing, the internal power button thing, and the resetting the SMU thing (with crossed fingers and bated breath) but -- so I'm thinking is it the power supply? I read some of Jim's weighty, but worthy tome and resolved to remove the power supply and have a look. On opening it up, it does look as though, one (at least) of the capacitors has 'blown' (by the way, just in case I sound like I know what I'm talking about, I don't of course, I'm just quoting Jim's words;-) I'd love to send you a picture of the inside of the power supply showing what I believe to be a 'blown' capacitator (and I'm going to try to send one to Jim as I think it might be useful to him and others. can I attach a photo in any way or would you like to send me your email address <Edited by Moderator>
Thanks
Pete
PS it's still 'weird' to me, why it starts and runs well, when started from tiger (or whatever) and then starts or restarts from the Hard Drive unless I leave it a few hours and come back and try to start it
again? wow it's late nearly 4.00am here in london UK. -
FF 18.0.1 constant disk activity after 1 minute with no tabs open
FF 18.0.1 on Windows XP SP3.
Within 1 minute of starting FF I observe constant and excessive disk activity.
I am unable to use any other applications due to the response time.
I have closed all tabs and disabled all plugins.
I have just started a FF "reset to factory default", but pop-up window for "Please wait while Firefox cleans up your old data" has been running for 15 minutes.
Any ideas?It sounds like you've got some other problems on your computer as well.
Restart your PC, then try the steps at http://www.microsoft.com/atwork/maintenance/speed.aspx#fbid=6pXkdz7T_94 to try to clean your computer up.
After that, Try to reset Firefox again. -
Firefox on my MacBook keeps crashing after about 1 minute use.
For the last few weeks I have not been able to use Firefox.
It keeps crashing about about 1 minute of use. It is not always on the same page that it crashes.
I have tried reinstalling the program and that does not help at all.
Can someone please help me.
== Crash ID(s) ==
sqlite3Step
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_4; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4Hi,
If it was working but now fails, it could be a problem with your catalog.
I would suggest you try repairing and optimizing it
Load the organizer
From the File menu, select Manage Catalogs - that should open the Catalog Manager.
Select you current catalog and click on the Repair button
When that has finished, click on the Optimize button
When that is done, click on the Cancel button to close the Catalog Manager.
If it crashes before you can get into the Catalog Manager, start the organizer while holding down the shift key - that should go straight into the Catalog Manger - resume at step 3 above.
Good luck
Brian
Maybe you are looking for
-
Meu iphone esta com problema. Apareceu uma tela de um icone de nota musical e abaixo o desenho do cabo de usb. Coloco ele conectado no computador ai da que detectou o meu iphone e ele precisa ser restaurado e atualizado. Eu Clico em confirmar, ele
-
Photos not appearing correctly on 2nd mac
I maintain an iPhoto library in a shared folder on an iMac and my wife accesses it from a Macbook. We do not use iPhoto concurrently. Both macs are connected (wired) to an Airport Extreme. iPhoto behaves well on the iMac (where the library resides bu
-
Hi All, In our PI Production system we are getting lot of time out dumps in ST22 as below. The program u201CCL_XMS_PERSIST_ADM============CPu201D has exceeded the maximum permitted uninterrupted runtime and has therefore been terminated. I have check
-
JSP compilation: code too large on SP14
Hello, I developed EP application based on JSPDynPage on SP13 with big jsp file. This application was running on SP13 without problem. Later, we upgraded to SP14 and application logged exception: "code too large" when compiling jsp. I tried to devide
-
What profile is required in order to learn Oracle Utilities?
Hi, I'm a DBA Oracle 10g, a company wants to give me some courses about Oracle Utilities, but I dont know what is the profile o the skills that I have in order to learn this tecnology. Can anybody give more information about it? Thanks