MIR7 with Dummy PO

Hi ,
A little explanation on the things I have been trying. I wanted to park a document on a non-existing purchase order .
For non existing purchase orders I tried to create a dummy purchase order to be able to enter at least one line and to park (or post) the rest on a GL account. I'm unable to park on account 499110, because the program requests a released purchase order. Dummy purchase order XXXXXXXXX can not be used because it is not released, and if I want to release the purchase order, I'm certainly gone in th wrong direction.
While trying to do this I get the following error :
"No delivery cost exist for purchase order XXXXXXXXXX 00000"
The idea is to set up the system to be able to do everything online which I need to take over in batch.
Any guidance will be appreciated.

Hi,
It doesn't require any setting from MM side. Ask your FI Person to check the following config. setting
OAY2 - Here check whether LVA has been specified for the asset classes
OAYK - Here check the amount specified for low value assets

Similar Messages

  • Transaction code: 9KE0  - Posting with Dummy profit center

    Hi All,
    We have an issue with transation 9KE0, While posting any adjustment entries with single line item, system automaticaly creating second line item few times.  We were unable to find the reason why it is creating second line for few documents?
    Our requirement is that those entries should have only one line item in transaction 9KE0. Most of the cases we were able to post the document with single line item.
    We are using almost 100 co.codes for our client.  
    For ex:  if we post one entry in co.code 1000 through transaction 9KE0 with single item, system posting with one lineitem.
    But some times for the same co.code with same parameters if we post one line item, second line item automatically creating with dummy profit center while posting.
    Please let us know why the system is creating two line items.
    Awaiting for your replies.
    Thanks in Advance
    Prasad
    Edited by: prasad naga on Feb 22, 2011 2:53 PM

    Hi,
    We have further analyzed this issue and found that, whenever the amount in field(KSL -Amount in profit center local currency) is ZERO, System it is creating second line item with dummy profit center.
    ex:1
    proft cenert        account         amount in co.code cur    amount in profit center local currency
    9999                    100000             - 0.13                                 00
    dummy                 100010               0.13                                 00
    ex:2
    proft cenert        account         amount in co.code cur    amount in profit center local currency
    9999                    100000             - 3.13                                 1
    we have verified the values in GLPCA table also... whenever the  tech field KSL-Amount in profit center local currency is zero system creating two line items.
    Please suggest us is there a solution to stop the second line item even the amount in profit center local currency field (Tech name -KSL) is Zero
    Awaiting for your suggestions.
    Thanks in advance
    Prasad

  • Value Contract with dummy material.

    I want to create a contract with Dummy material for a certain value of amount then want to create release orders for other materials with reference to this contract.
    For example - I want to enter into a contract with a customer for amount £10000 for a period 1 year let's say for Any Electrical equipements.
    and with reference to this contract I want to release 5-10 materails which I am not sure any material which will be required by customer.
    The reference should be made with this contract and values from release order billed to customer needs to be updated to the contract
    - The requirement is that a dummy material is entered at contract with certain amount in place of actual consumable materials in release order.
    Kindly help
    Thanks & best regards
    Atree

    Hi Atree,
    it is not necessary a dummy material
    use assortment module WS01 for the list of materials you need in contract and add the assortment to the contract
    Thanks,
    Zoltan.

  • PO with Dummy Asset

    Dear Guru,
    Could you provide how to set up the PO with dummy asset?
    First, I use account assignment "A" and enter the dummy asset from FI team "DUMMY" but the message occurs as below.
    Message no. MEPO053
    Maximum LVA amount exceeded in the case of at least one asset
    Do I have to configure anything in MM side?
    Thank you very much.
    RD
    Saiyaman

    Hi,
    It doesn't require any setting from MM side. Ask your FI Person to check the following config. setting
    OAY2 - Here check whether LVA has been specified for the asset classes
    OAYK - Here check the amount specified for low value assets

  • Idoc with dummy data

    Dear All,
    Can you please send to me an Idoc (xml format) with dummy data for one of the following masterdata (MATMAS05, CREMDM04, DEBMDM06 ...) because I have MDM but I do not have any backend system (R/3, CRM..)
    My email addres is [email protected]
    Points will be awarded.
    Kind regards,
    NL

    Hi,
    one more delivered
    did you get this one too?
    Regards,
    Michal

  • Apple newbie with dummy question

    I have a question about my 3 day old Core Duo. I'm connecting just fine and love my machine, but before I go paying bills/banking/etc online, I want to make sure my connection is secure. I'm connecting wirelessly via a Lynksis WRT54G router. The very first time I turned this bad-boy on, it asked for a password to the network, but hasn't since. I'm afraid I may have "keychained" the password or opened the network to everyone or something. Is there a way to check? I chatted with an agent, and they said since it was a third party thing (Lynksis), they couldn't answer. All I want to make sure of, is that my connection is secure with either WPA/WEP. I don't even know what that means, I just know it makes it secure! Again - first time Apple user (unless you count my Dad's IIC when I was 8) - so please assume I'm a dummy when you reply!
    Thanks,
    Matt

    Hello Matt
    Goto your router's config at http://192.168.1.1 the default user is admin and the password is admin
    goto the wireless tab then wireless security. Make sure your using WPA-PSK and NOT WEP.
    WEP is easily cracked WPA is a lot more secure.
    The first time you connect to a wireless network you do have the option to add the password to the keychain, this is normal and does not have any security problems.
    To check to see if you had added your wirless network password to your keychain open up the keychain Access found in /Applications/Utilities
    You can then see a list of all the keychain entries you may see your wireless network listed in there.

  • Using an LSMW program with dummy recording.

    Hi all,
       I am new to lsmw, and i am facing some issues with a program i am working on.
    In my current program I created a dummy recording, and bypassed other steps by manually writing my code in the step  'Maintain Field Mapping and Conversion'. I supplied dummy data to all the other steps. When i run the step convert data, the output I get is supposedly redundant because the data generation is already happening in the 'Read Data' step.
    Right now I am generating the output data manually through the conversion program generated for the program I wrote in the  step  'Maintain Field Mapping and Conversion'. Essentially the same thing is happening when i run the 'Read Data' step.
    is it possible to access the data already generated in the 'Read Data' step in the 'Convert Data' step, instead of generating the data all over again(i am doing just that right now) through the conversion program.
    In Short, is there a way to manipulate the data generated in the 'Read Data' step in the 'Convert Data' step.
    Thanks,
    Abhinay

    Hi ,
    Read step is to read the data from the input fyou specified. No code or progam , written in " filed mapping and conversion" step is executed during the read data step. It is executed only during the conversion step.You can modify the data read during the read step anyways during the Coversion step by writing your own logic.
    Regards
    Vijay

  • IChat 3.0 not connecting with dummy .mac account.

    Hi guys,
    Here is my problem. I have a dummy .mac account with iChat, have been using it for the past 3 years, today I can´t connect. iChat works fine with an AIM account but not with my dummy .mac.
    Does iChat keep a list of contacts so I can transfer them to my new AIM account?
    I am not sure if this account has been deleted but at the same time it is letting me sign up to post this message.
    My .mac account is [email protected], it works for discussion groups but not for iChat anymore. I am sure it is password related.
    The error message says:
    Could not connect to AIM
    Could not connect to AIM. Try again. The server message was Auth: DbSendError
    What I need to know is if I can get this account working or try to get the list of contacts so I can add them to the AIM account.
    Thanks,
    AJ
    PowerBook G4 1.33GHz, 1GB RAM   Mac OS X (10.4.5)  

    Keep logging on as fast as you can, works for me when i get the error message.
    Tony

  • Authorization with DUMMY

    Hi experts,
    What does it mean if in the authority check there is a dummy? The program cannot absolve this authorization check successfuly, what is the problem. I have full authority for all components, could it caused by the dummy?
    I have the following code:
      AUTHORITY-CHECK OBJECT 'P_TRAVL'
                       ID 'bukrs' FIELD w_header-bukrs
                       ID 'authp' DUMMY
                       ID 'persa' DUMMY
                       ID 'kostl' DUMMY

    Hi,
    Instead of ID name FIELD f, you can also write ID name DUMMY. This means that no check is performed for the field concerned.
    The check can only be performed on CHAR fields. All other field types result in 'unauthorized'.
    Thanks,
    Sriram Ponna.

  • Anyway to activate old 2G iPhone with dummy SIM card?

    Hello all, I just had a quick question that I can't seem to find the answer to. Currently, I have an old 2G iphone that is in "Emergency Mode Only." I was wondering, I have plenty of dummy sim cards lying around (used to be an RSA rep, ended up collecting several old, un-activated sim's) and was wondering if there was anyway to use one of these sim cards to at least get to the home screen of the iPhone so I could use it for music, movies and when I enter wifi. When I try and do this, all I get is the "Activate your iPhone" screen in iTunes. Any ideas would be greatly appreciated.

    Yes, it doesn't seem quite right does it? Either illegally hack a device, or sell it to somebody else who IS going to illegally hack it because you no longer have any use for it.
    Its a shame, I've had to swap between this phone a couple times while my 3G was out for repair. I did activate the 2G, and went through the hassle of activating, switching my rate plan, and all that good stuff. When I got my 3G back, I was able to use a blank sim card and still be on the home screen, until I did a complete reset on the phone, which brings us to the present, and the Emergency Call only screen. Seems that if I wouldn't have completely reset the phone, I would have at least been able to use it as an iPod.
    Thanks for the quick replies. So I guess my next question is, is it possible to jailbreak an inactivated iPhone in Emergency Mode only to use it as an iPod and such?

  • Filling matrix with Dummy Data

    I am doing a demo screen for a client and I need to fill a matrix with hard coded data. I followed the sample code and I have the following code but it is not working for me (it throws a matrix-line exists exception):
    // Now get the matrix Item.
    SAPbouiCOM.Item matrixItem  = oForm.Items.Item("v33_Grid");
    theMatrix = (SAPbouiCOM.Matrix) matrixItem.Specific;
    Form.Freeze(true);
    SAPbouiCOM.UserDataSource uds;
    uds = oForm.DataSources.UserDataSources.Add("salesUds",SAPbouiCOM.BoDataType.dt_SHORT_TEXT, 10);
    theMatrix.AddRow(1, theMatrix.RowCount);
    SAPbouiCOM.Column     col      = null;
    // Ready Matrix to populate data
    theMatrix.AutoResizeColumns();
    col = theMatrix.Columns.Item("desc1");
    col.DataBind.SetBound(true, "", "salesUds");
    uds.Value = "Test description";
    // setting the user data source data
    theMatrix.LoadFromDataSource();
    oForm.Freeze(false);
    oForm.Update();     
    I really need to get this working. ANyone got any ideas what I am doing wrong?

    Hi Laura,
    You should use theMatrix.SetLineData() which is the avaiable statement for user matrixes.
    Here is some code that loads a form with a matrix from an XML. This way you can edit form values in the XML, instead of hard coding.
    Dim oXMLDoc1 As Xml.XmlDocument = New Xml.XmlDocument
    oXMLDoc1.Load("C:BaseForm.xml")
    App.LoadBatchActions(oXMLDoc1.InnerXml)
    Dim oForm As SAPbouiCOM.Form = App.Forms.GetForm("ITA0002", 1)
    Dim oMatrix As SAPbouiCOM.Matrix = oForm.Items.Item("5").Specific()
    Dim Informes As SAPbouiCOM.UserDataSource = oForm.DataSources.UserDataSources.Item("Informes")
    Dim ID As SAPbouiCOM.UserDataSource = oForm.DataSources.UserDataSources.Item("ID")
    Dim i As Int16 = 1
    oMatrix.AddRow(ListaInformes.Length)
    For Each Informe As String In NameList
       Informes.ValueEx = Informe
       ID.ValueEx = i.ToString
       oMatrix.SetLineData(i)
       i = i + 1
    Next
    The xml is this one:
    <?xml version="1.0" encoding="UTF-16"?>
    <Application>
         <forms>
              <action type="add">
                   <form AutoManaged="1" BorderStyle="4" FormType="ITA0002" ObjectType="-1" SupportedModes="1" appformnumber="ITA0002" client_height="284" client_width="291" color="0" default_button="1" height="316" left="363" mode="1" pane="1" title="Informes" top="149" type="4" visible="1" width="297">
                        <datasources>
                             <userdatasources>
                                  <action type="add">
                                       <datasource size="254" type="9" uid="Informes"></datasource>
                                  </action>
                                  <action type="add">
                                       <datasource size="10" type="9" uid="ID"></datasource>
                                  </action>
                             </userdatasources>
                        </datasources>
                        <items>
                             <action type="add">
                                  <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="0" from_pane="0" height="19" left="6" linkto="" right_just="1" supp_zeros="0" tab_order="10" text_style="0" to_pane="0" top="260" type="4" uid="1" visible="1" width="65">
                                       <AutoManagedAttribute></AutoManagedAttribute>
                                       <specific caption="OK"></specific>
                                  </item>
                                  <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="0" from_pane="0" height="19" left="77" linkto="" right_just="1" supp_zeros="0" tab_order="20" text_style="0" to_pane="0" top="260" type="4" uid="2" visible="1" width="65">
                                       <AutoManagedAttribute></AutoManagedAttribute>
                                       <specific caption="Cancelar"></specific>
                                  </item>
                                  <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="-1" from_pane="0" height="20" left="5" linkto="" right_just="0" supp_zeros="0" tab_order="0" text_style="0" to_pane="0" top="5" type="99" uid="3" visible="1" width="80">
                                       <AutoManagedAttribute></AutoManagedAttribute>
                                       <specific AffectsFormMode="1" caption="Informes" val_off="0" val_on="1">
                                            <databind alias="Informes" databound="1" table=""></databind>
                                       </specific>
                                  </item>
                                  <item AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" enabled="1" font_size="0" forecolor="-1" from_pane="1" height="224" left="8" linkto="" right_just="0" supp_zeros="0" tab_order="60" text_style="0" to_pane="1" top="28" type="127" uid="5" visible="1" width="276">
                                       <AutoManagedAttribute></AutoManagedAttribute>
                                       <specific SelectionMode="2" layout="0" titleHeight="0">
                                            <columns>
                                                 <action type="add">
                                                      <column AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" editable="0" font_size="12" forecolor="-1" right_just="0" text_style="0" title="2" type="16" uid="2" val_off="N" val_on="Y" visible="1" width="20">
                                                           <databind alias="ID" databound="1" table=""></databind>
                                                           <ExtendedObject></ExtendedObject>
                                                      </column>
                                                      <column AffectsFormMode="1" backcolor="-1" description="" disp_desc="0" editable="0" font_size="12" forecolor="-1" right_just="0" text_style="0" title="Nombre" type="16" uid="1" val_off="" val_on="" visible="1" width="255">
                                                           <databind alias="Informes" databound="1" table=""></databind>
                                                           <ExtendedObject></ExtendedObject>
                                                      </column>
                                                 </action>
                                            </columns>
                                       </specific>
                                  </item>
                             </action>
                        </items>
                        <items>
                             <action type="group">
                                  <item uid="3"></item>
                                  <item uid="4"></item>
                             </action>
                        </items>
                        <FormMenu></FormMenu>
                        <DataBrowser></DataBrowser>
                   </form>
              </action>
         </forms>
    </Application>
    Regards,
    Ibai Peñ

  • Padding query results with dummy records

    I have a dashboard report that has one group and subsequest detail rows.  The detail rows consist of a string representation of a date and 6 indicators which go with that date.  My user would like to have a consistent number of records (e.g. the last 12 months) show for each group.  If there is no data available for a given period he wants to display blank indicators in the color gray.
    I am interested in any feedback for the best way to do this or if this is even possible.
    Using Crystal Xi sp2.
    Thaks in advance,
    Don

    Crystal is driven by the data it gets from the database.  It is far, far easier (IMHO) to make the database return the data to make the Crystal report straight forward than to try to force Crystal to do things driven by logic.
    Is it impossible to do in another way?  Probably not.  Is it rational to try?  Probably not! 
    BTW, I don't think there's anything in my sample SQL that wouldn't work in Oracle (but it's been a while since I used Oracle, so I could be wrong).
    HTH,
    Carl

  • Re: Creating a CE function with dummy table

    Hello LArs/Krishna;
    I have calculated column in which I have to insert current timestamp  for more than one records in graphical calculation view, please help me in this.

    Hi Atul,
    To insert or update records, always use procedure. If required then use SQLScript calculation view which invokes the procedure.
    Regards
    Raj

  • TCode MIR7: Dump while deleting Parked Invoice with zero value

    Hi,
    We had parked an Invoice using TCode MIR7 with Zero Value with reference of a PO. Now as the value of invoice is zero, we want to delete it using MIR7.
    In MIR7, when we go to Invoice Document-->Delete, it results in dump. Dump is as follows:
    Error analysis
        Short text of error message:
        No document found
        Long text of error message:
        Technical information about the message:
        Message class....... "FI"
        Number.............. 124
        Variable 1.......... " "
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    How to correct the error
        Probably the only way to eliminate the error is to correct the program.
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "MESSAGE_TYPE_X" " "
        "SAPLFMPR" or "LFMPRU05"
        "FM_CO_DOCUMENT_DELETE"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
        (Unconverted)".
        3. If the problem occurs in a problem of your own or a modified SAP
        program: The source code of the program
           In the editor, choose "Utilities->More
        Utilities->Upload/Download->Download".
        4. Details about the conditions under which the error occurred or which actions and input led to the error.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLFMPR" - in
         "FM_CO_DOCUMENT_DELETE".
        The main program was "SAPLMR1M ".
        In the source code you have the termination point in line 34
        of the (Include) program "LFMPRU05".
    Any help.
    Regards,
    CMC Team.

    Hi,
    Check following SAP notes:-
    1173846  (MM) Termination when deleting prepaid logistics invoices
    Reason and Prerequisites
    This problem is caused by a program error.
    1224772  (MM) Error message FI24 when deleting parked invoices
    Reason and Prerequisites
    This is due to a program error. The total amount of the parked invoice is '0'.
    Regards,
    Anand Raichura

  • Why does my Web Handler work with Internet Explorer, but not with Firefox

    I am trying to develop a web page that uses the Simile Timeline (http://code.google.com/p/simile-widgets/wiki/Timeline) with data from SQL Server.
    In initial testing of my timeline I tested it with Example.xml, a static XML file in the correct format to be event data. I wrote the following in the appropriate place within mytimeline's Javascript: -
    var WebHandler = "Example.xml"
    tl.loadXML(WebHandler, function (xml, url) { eventSourceFamily.loadXML(xml, url) });
    This worked fine with both Firefox and Internet Explorer. I then changed the assignment to
    var WebHandler = "GDBTimeline.ashx?Type=Family&Userid=" + getControlValue("input", "hdnUser");
    so that invoked a web handler that could look up the SQL database and return the XML that I wanted, and wrote this web handler.
    This works perfectly with Internet Explorer, but with FireFox the timeline band is blank. Yet when I examine the http traffic with Fiddler2 (http://www.fiddler2.com/fiddler2/) I see that with either browser there is a response from URL
    /GDB_pages/GDBTimeline.ashx?Type=Family&Userid=robertb
    that returns the XML that it is supposed to.
    I have previously used web handlers with Firefox before, with no problems. The Fiddler results conclusively show that the web handler is invoked, and returns the appropriate XML, and this XML is identical to the XML from the static test with Example.xml.
    Where do I start looking for answers? I don't even know if this is a Simile problem, a Firefox problem, or an ASP.NET problem.
    Thank you, Robert.

    Problem solved. The issue: Content Type was not correct.
    Visual Studio creates the web handler with dummy code like this: -
    Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
    context.Response.ContentType = "text/plain"
    context.Response.Write("Hello World")
    End Sub
    I wrote a database query that set a string variable to the XML I wanted: -
    Public Sub ProcessRequest(ByVal context As HttpContext) Implements IHttpHandler.ProcessRequest
    Dim Outstring as string
    ' my logic to fill Outstring with XML
    context.Response.ContentType = "text/plain"
    context.Response.Write(Outstring)
    End Sub
    This works with Internet Explorer. However it's not strictly correct: to make it work with other browsers as well,
    context.Response.ContentType = "text/plain"
    should be
    context.Response.ContentType = "text/xml"
    It now works with IE, FF, and Chrome, and presumably all others.

Maybe you are looking for